[PATCH v2 linux dev-5.3 1/4] dt-bindings: lpc: add aspeed-g6 compatible strings

[Eddie James]

On 9/19/19 10:23 AM, Brad Bishop wrote:
> Assume The AST2600 SoCs contain the same LPC devices as the AST2500.


Reviewed-by: Eddie James <eajames at linux.ibm.com>


>
> Signed-off-by: Brad Bishop <bradleyb at fuzziesquirrel.com>
> ---
>   .../devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt   | 3 ++-
>   Documentation/devicetree/bindings/mfd/aspeed-lpc.txt      | 8 +++++++-
>   2 files changed, 9 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt
> index 028268fd99ee..4b43b7829bd9 100644
> --- a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt
> +++ b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt
> @@ -1,6 +1,6 @@
>   * Aspeed BT (Block Transfer) IPMI interface
>   
> -The Aspeed SOCs (AST2400 and AST2500) are commonly used as BMCs
> +The Aspeed SOCs (AST2400, AST2500 and AST2600) are commonly used as BMCs
>   (BaseBoard Management Controllers) and the BT interface can be used to
>   perform in-band IPMI communication with their host.
>   
> @@ -9,6 +9,7 @@ Required properties:
>   - compatible : should be one of
>   	"aspeed,ast2400-ibt-bmc"
>   	"aspeed,ast2500-ibt-bmc"
> +	"aspeed,ast2600-ibt-bmc"
>   - reg: physical address and size of the registers
>   
>   Optional properties:
> diff --git a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
> index 86446074e206..e1197bab57bb 100644
> --- a/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
> +++ b/Documentation/devicetree/bindings/mfd/aspeed-lpc.txt
> @@ -46,6 +46,7 @@ Required properties
>   - compatible:	One of:
>   		"aspeed,ast2400-lpc", "simple-mfd"
>   		"aspeed,ast2500-lpc", "simple-mfd"
> +		"aspeed,ast2600-lpc", "simple-mfd"
>   
>   - reg:		contains the physical address and length values of the Aspeed
>                   LPC memory region.
> @@ -64,6 +65,7 @@ BMC Node
>   - compatible:	One of:
>   		"aspeed,ast2400-lpc-bmc"
>   		"aspeed,ast2500-lpc-bmc"
> +		"aspeed,ast2600-lpc-bmc"
>   
>   - reg:		contains the physical address and length values of the
>                   H8S/2168-compatible LPC controller memory region
> @@ -74,6 +76,7 @@ Host Node
>   - compatible:   One of:
>   		"aspeed,ast2400-lpc-host", "simple-mfd", "syscon"
>   		"aspeed,ast2500-lpc-host", "simple-mfd", "syscon"
> +		"aspeed,ast2600-lpc-host", "simple-mfd", "syscon"
>   
>   - reg:		contains the address and length values of the host-related
>                   register space for the Aspeed LPC controller
> @@ -128,6 +131,7 @@ Required properties:
>   - compatible:	One of:
>   		"aspeed,ast2400-lpc-ctrl";
>   		"aspeed,ast2500-lpc-ctrl";
> +		"aspeed,ast2600-lpc-ctrl";
>   
>   - reg:		contains offset/length values of the host interface controller
>   		memory regions
> @@ -168,6 +172,7 @@ Required properties:
>   - compatible:	One of:
>   		"aspeed,ast2400-lhc";
>   		"aspeed,ast2500-lhc";
> +		"aspeed,ast2600-lhc";
>   
>   - reg:		contains offset/length values of the LHC memory regions. In the
>   		AST2400 and AST2500 there are two regions.
> @@ -187,7 +192,8 @@ state of the LPC bus. Some systems may chose to modify this configuration.
>   
>   Required properties:
>   
> - - compatible:		"aspeed,ast2500-lpc-reset" or
> + - compatible:		"aspeed,ast2600-lpc-reset" or
> +			"aspeed,ast2500-lpc-reset"
>   			"aspeed,ast2400-lpc-reset"
>    - reg:			offset and length of the IP in the LHC memory region
>    - #reset-controller	indicates the number of reset cells expected