[PATCH v2 linux dev-5.3 0/5] ARM: dts: aspeed-g6 lpc, rainier

[Brad Bishop]

> This is a quick attempt at wiring up some of the LPC bits on the
> AST2600, and then using it on a new board, Rainier, a new POWER system
> with an AST2600.  The only verification performed was ensuring the
> kernel still booted and the ibt device probed using the Rainier device
> tree atop the ast2600-evb qemu model.  Please review.

Changes since v1:
  - split DT binding docs and driver changes into separate patches.
  - reordered rainier DT elements (alphabetized).
  - added rainier rtc, lpc-ctl, reserved memory, mac devices

Brad Bishop (4):
  dt-bindings: lpc: add aspeed-g6 compatible strings
  ARM: aspeed-g6: lpc: add compatible strings
  ARM: dts: aspeed-g6: Add lpc devices
  ARM: dts: aspeed: add Rainier system

 .../bindings/ipmi/aspeed,ast2400-ibt-bmc.txt  |   3 +-
 .../devicetree/bindings/mfd/aspeed-lpc.txt    |   8 +-
 arch/arm/boot/dts/Makefile                    |   3 +-
 arch/arm/boot/dts/aspeed-bmc-opp-rainier.dts  | 485 ++++++++++++++++++
 arch/arm/boot/dts/aspeed-g6.dtsi              |  91 ++++
 drivers/char/ipmi/bt-bmc.c                    |   1 +
 drivers/char/ipmi/kcs_bmc_aspeed.c            |   1 +
 drivers/reset/reset-simple.c                  |   1 +
 drivers/soc/aspeed/aspeed-lpc-ctrl.c          |   1 +
 drivers/soc/aspeed/aspeed-lpc-snoop.c         |   2 +
 10 files changed, 593 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm/boot/dts/aspeed-bmc-opp-rainier.dts

-- 
2.21.0