Enable KCS interface in zaius

Yong Li yong.b.li at linux.intel.com
Mon Sep 9 18:53:20 AEST 2019


Can you find the image-mtd file? You can flash this file with this
command(scp it to /tmp folder on the board):

 

flashcp /tmp/image-mtd /dev/mtd0

 

Thanks,

Yong

From: openbmc <openbmc-bounces+yong.b.li=linux.intel.com at lists.ozlabs.org>
On Behalf Of Zheng Bao
Sent: Saturday, September 7, 2019 7:34 PM
To: Yong Li <yong.b.li at linux.intel.com>; 'Andrew Jeffery' <andrew at aj.id.au>;
'AKASH G J' <akashgj91 at gmail.com>; openbmc at lists.ozlabs.org
Subject: Re: Enable KCS interface in zaius

 

I check out the https://github.com/Intel-BMC/openbmc

and build the board: meta-openbmc-mods/meta-wolfpass/conf

 

But got the error,

dd: failed to open
'/home/baozheng/bmc/openbmc-github/build/tmp/deploy/images/intel-ast2500/fit
Image-rootfs-intel-ast2500.bin': No such file or directory

 

Did I miss something?

 

Zheng

 

 

  _____  

From: openbmc <openbmc-bounces+fishbaoz=hotmail.com at lists.ozlabs.org
<mailto:openbmc-bounces+fishbaoz=hotmail.com at lists.ozlabs.org> > on behalf
of Yong Li <yong.b.li at linux.intel.com <mailto:yong.b.li at linux.intel.com> >
Sent: Friday, August 30, 2019 6:29 AM
To: 'Andrew Jeffery' <andrew at aj.id.au <mailto:andrew at aj.id.au> >; 'AKASH G
J' <akashgj91 at gmail.com <mailto:akashgj91 at gmail.com> >;
openbmc at lists.ozlabs.org <mailto:openbmc at lists.ozlabs.org>
<openbmc at lists.ozlabs.org <mailto:openbmc at lists.ozlabs.org> >
Subject: RE: Enable KCS interface in zaius 

 

It seems that the kernel needs to enable KCS, and disable BT. 
CONFIG_ASPEED_KCS_IPMI_BMC=y

Suggest to check on this: https://github.com/Intel-BMC/openbmc

Thanks,
Yong
-----Original Message-----
From: openbmc <openbmc-bounces+yong.b.li=linux.intel.com at lists.ozlabs.org
<mailto:openbmc-bounces+yong.b.li=linux.intel.com at lists.ozlabs.org> >
On Behalf Of Andrew Jeffery
Sent: Friday, August 30, 2019 12:42 PM
To: AKASH G J <akashgj91 at gmail.com <mailto:akashgj91 at gmail.com> >;
openbmc at lists.ozlabs.org <mailto:openbmc at lists.ozlabs.org> 
Subject: Re: Enable KCS interface in zaius



On Thu, 29 Aug 2019, at 09:05, AKASH G J wrote:
> Hi all,
> 
> I am using server platform with Intel processor and Aspeed AST-2500 
> BMC. OpenBMC firmware with zaius configuration is used for BMC.
> 

Zaius is an OpenPOWER platform (and our OpenPOWER platforms use the BT
interface rather than KCS). You're using an Intel-based processor for the
host, so perhaps it's better to start with an x86-based platform such as the
s2600wf. This should already have KCS IPMI enabled for you.

Andrew

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20190909/5c7e30b5/attachment.htm>


More information about the openbmc mailing list