[linux dev-5.3 v2] arm: dts: add NPCM7xx RunBMC Olympus Quanta device tree

[Joel Stanley]

On Wed, 25 Sep 2019 at 12:26, Tomer Maimon <tmaimon77 at gmail.com> wrote:
>
> Add Nuvoton NPCM7xx RunBMC Olympus Quanta board
> device tree.
>
> Signed-off-by: Tomer Maimon <tmaimon77 at gmail.com>

Thanks Tomer, I've applied this to dev-5.3. Please test it when you
get a chance as I do not have access to RunBMC hardware.

There's some warnings that are produced if you're using a recent
device tree compiler version:

$ dtc --version
Version: DTC 1.5.0

  DTC     arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dtb
../arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts:428.6-25:
Warning (i2c_bus_reg):
/ahb/apb/i2c at 85000/i2c-slave-mqueue at 40000010:reg: I2C address must be
less than 10-bits, got "0x40000010"
../arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi:222.22-231.5: Warning
(spi_bus_bridge): /ahb/fiu at fb000000: node name for SPI buses should be
'spi'
  also defined at
../arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts:134.22-195.5
../arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi:233.22-244.5: Warning
(spi_bus_bridge): /ahb/fiu at c0000000: node name for SPI buses should be
'spi'
  also defined at
../arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dts:197.22-220.5
arch/arm/boot/dts/nuvoton-npcm750-runbmc-olympus.dtb: Warning
(spi_bus_reg): Failed prerequisite 'spi_bus_bridge'

If you could send a follow up patch that fixes this that would be great.

Cheers,

Joel