Enable KCS interface in zaius

[Zheng Bao]

I check out the https://github.com/Intel-BMC/openbmc
and build the board: meta-openbmc-mods/meta-wolfpass/conf

But got the error,
dd: failed to open '/home/baozheng/bmc/openbmc-github/build/tmp/deploy/images/intel-ast2500/fitImage-rootfs-intel-ast2500.bin': No such file or directory

Did I miss something?

Zheng


________________________________
From: openbmc <openbmc-bounces+fishbaoz=hotmail.com at lists.ozlabs.org> on behalf of Yong Li <yong.b.li at linux.intel.com>
Sent: Friday, August 30, 2019 6:29 AM
To: 'Andrew Jeffery' <andrew at aj.id.au>; 'AKASH G J' <akashgj91 at gmail.com>; openbmc at lists.ozlabs.org <openbmc at lists.ozlabs.org>
Subject: RE: Enable KCS interface in zaius

It seems that the kernel needs to enable KCS, and disable BT.
CONFIG_ASPEED_KCS_IPMI_BMC=y

Suggest to check on this: https://github.com/Intel-BMC/openbmc

Thanks,
Yong
-----Original Message-----
From: openbmc <openbmc-bounces+yong.b.li=linux.intel.com at lists.ozlabs.org>
On Behalf Of Andrew Jeffery
Sent: Friday, August 30, 2019 12:42 PM
To: AKASH G J <akashgj91 at gmail.com>; openbmc at lists.ozlabs.org
Subject: Re: Enable KCS interface in zaius



On Thu, 29 Aug 2019, at 09:05, AKASH G J wrote:
> Hi all,
>
> I am using server platform with Intel processor and Aspeed AST-2500
> BMC. OpenBMC firmware with zaius configuration is used for BMC.
>

Zaius is an OpenPOWER platform (and our OpenPOWER platforms use the BT
interface rather than KCS). You're using an Intel-based processor for the
host, so perhaps it's better to start with an x86-based platform such as the
s2600wf. This should already have KCS IPMI enabled for you.

Andrew

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20190907/59723de7/attachment.htm>