[PATCH v2 linux dev-5.3 3/4] ARM: dts: aspeed-g6: Add lpc devices

[Brad Bishop]

Assume everything is the same as G5, except the interrupt is updated.

Signed-off-by: Brad Bishop <bradleyb at fuzziesquirrel.com>
---
 arch/arm/boot/dts/aspeed-g6.dtsi | 91 ++++++++++++++++++++++++++++++++
 1 file changed, 91 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 72038c16f541..b4991cbe1f36 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -249,6 +249,97 @@
 				status = "disabled";
 			};
 
+			lpc: lpc at 1e789000 {
+				compatible = "aspeed,ast2600-lpc", "simple-mfd";
+				reg = <0x1e789000 0x1000>;
+
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1e789000 0x1000>;
+
+				lpc_bmc: lpc-bmc at 0 {
+					compatible = "aspeed,ast2600-lpc-bmc", "simple-mfd", "syscon";
+					reg = <0x0 0x80>;
+					reg-io-width = <4>;
+
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0x0 0x0 0x80>;
+
+					kcs1: kcs1 at 0 {
+						compatible = "aspeed,ast2600-kcs-bmc";
+						interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+						kcs_chan = <1>;
+						status = "disabled";
+					};
+					kcs2: kcs2 at 0 {
+						compatible = "aspeed,ast2600-kcs-bmc";
+						interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+						kcs_chan = <2>;
+						status = "disabled";
+					};
+					kcs3: kcs3 at 0 {
+						compatible = "aspeed,ast2600-kcs-bmc";
+						interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+						kcs_chan = <3>;
+						status = "disabled";
+					};
+				};
+
+				lpc_host: lpc-host at 80 {
+					compatible = "aspeed,ast2600-lpc-host", "simple-mfd", "syscon";
+					reg = <0x80 0x1e0>;
+					reg-io-width = <4>;
+
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0x0 0x80 0x1e0>;
+
+					kcs4: kcs4 at 0 {
+						compatible = "aspeed,ast2600-kcs-bmc";
+						interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+						kcs_chan = <4>;
+						status = "disabled";
+					};
+
+					lpc_ctrl: lpc-ctrl at 0 {
+						compatible = "aspeed,ast2600-lpc-ctrl";
+						reg = <0x0 0x80>;
+						clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+						status = "disabled";
+					};
+
+					lpc_snoop: lpc-snoop at 0 {
+						compatible = "aspeed,ast2600-lpc-snoop";
+						reg = <0x0 0x80>;
+						interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+						status = "disabled";
+					};
+
+					lhc: lhc at 20 {
+						compatible = "aspeed,ast2600-lhc";
+						reg = <0x20 0x24 0x48 0x8>;
+					};
+
+					lpc_reset: reset-controller at 18 {
+						compatible = "aspeed,ast2600-lpc-reset";
+						reg = <0x18 0x4>;
+						#reset-cells = <1>;
+					};
+
+					ibt: ibt at c0 {
+						compatible = "aspeed,ast2600-ibt-bmc";
+						reg = <0xc0 0x18>;
+						interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+						status = "disabled";
+					};
+
+					sio_regs: regs {
+						compatible = "aspeed,bmc-misc";
+					};
+				};
+			};
+
 			sdc: sdc at 1e740000 {
 				compatible = "aspeed,ast2600-sd-controller";
 				reg = <0x1e740000 0x100>;
-- 
2.21.0