Enable KCS interface in zaius
Yong Li
yong.b.li at linux.intel.com
Mon Sep 16 13:07:43 AEST 2019
Just want to know did you test the image using a real hardware?
You can check your kernel .config file in
build/tmp/work/intel_ast2500-openbmc-linux-gnueabi/linux-aspeed/5.2+gitAUTOI
NC+c01e98d151-r0/linux-intel_ast2500-standard-build
CONFIG_IPMI_KCS_BMC=y
CONFIG_ASPEED_KCS_IPMI_BMC=y
Thanks,
Yong
From: openbmc <openbmc-bounces+yong.b.li=linux.intel.com at lists.ozlabs.org>
On Behalf Of Zheng Bao
Sent: Thursday, September 12, 2019 5:09 PM
To: Yong Li <yong.b.li at linux.intel.com>; 'Andrew Jeffery' <andrew at aj.id.au>;
'AKASH G J' <akashgj91 at gmail.com>; openbmc at lists.ozlabs.org
Subject: Re: Enable KCS interface in zaius
I use qemu to test the image. Got the result.
$ qemu-system-arm -m 512 -M ast2500-evb -nographic -drive
file=phosphor-intel-platform-1.bin,format=raw,if=mtd
U-Boot 2016.07 (Sep 11 2019 - 21:38:56 +0000)
SOC : AST2500-A1
RST : 0x01
PLL : 24 MHz
CPU : 792 MHz
MEM : 2.240 MHz, EEC: Disable, Cache: Disable
VGA : 16 MiB
DRAM : init by SOC
Watchdog enabled
DRAM: 496 MiB
Flash: 32 MiB
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Error: start and/or end address not on sector boundary
Error: start and/or end address not on sector boundary
Error: start and/or end address not on sector boundary
Zheng
_____
From: Yong Li <yong.b.li at linux.intel.com <mailto:yong.b.li at linux.intel.com>
>
Sent: Tuesday, September 10, 2019 1:26 AM
To: 'Zheng Bao' <fishbaoz at hotmail.com <mailto:fishbaoz at hotmail.com> >;
'Andrew Jeffery' <andrew at aj.id.au <mailto:andrew at aj.id.au> >; 'AKASH G J'
<akashgj91 at gmail.com <mailto:akashgj91 at gmail.com> >;
openbmc at lists.ozlabs.org <mailto:openbmc at lists.ozlabs.org>
<openbmc at lists.ozlabs.org <mailto:openbmc at lists.ozlabs.org> >
Subject: RE: Enable KCS interface in zaius
I would like to know how did you perform the build? Please perform the below
commands:
export TEMPLATECONF=meta-openbmc-mods/meta-wht/conf
source oe-init-build-env
bitbake intel-platforms
Thanks,
Yong
From: Zheng Bao <fishbaoz at hotmail.com <mailto:fishbaoz at hotmail.com> >
Sent: Saturday, September 7, 2019 7:34 PM
To: Yong Li <yong.b.li at linux.intel.com <mailto:yong.b.li at linux.intel.com> >;
'Andrew Jeffery' <andrew at aj.id.au <mailto:andrew at aj.id.au> >; 'AKASH G J'
<akashgj91 at gmail.com <mailto:akashgj91 at gmail.com> >;
openbmc at lists.ozlabs.org <mailto:openbmc at lists.ozlabs.org>
Subject: Re: Enable KCS interface in zaius
I check out the https://github.com/Intel-BMC/openbmc
and build the board: meta-openbmc-mods/meta-wolfpass/conf
But got the error,
dd: failed to open
'/home/baozheng/bmc/openbmc-github/build/tmp/deploy/images/intel-ast2500/fit
Image-rootfs-intel-ast2500.bin': No such file or directory
Did I miss something?
Zheng
_____
From: openbmc <openbmc-bounces+fishbaoz=hotmail.com at lists.ozlabs.org
<mailto:openbmc-bounces+fishbaoz=hotmail.com at lists.ozlabs.org> > on behalf
of Yong Li <yong.b.li at linux.intel.com <mailto:yong.b.li at linux.intel.com> >
Sent: Friday, August 30, 2019 6:29 AM
To: 'Andrew Jeffery' <andrew at aj.id.au <mailto:andrew at aj.id.au> >; 'AKASH G
J' <akashgj91 at gmail.com <mailto:akashgj91 at gmail.com> >;
openbmc at lists.ozlabs.org <mailto:openbmc at lists.ozlabs.org>
<openbmc at lists.ozlabs.org <mailto:openbmc at lists.ozlabs.org> >
Subject: RE: Enable KCS interface in zaius
It seems that the kernel needs to enable KCS, and disable BT.
CONFIG_ASPEED_KCS_IPMI_BMC=y
Suggest to check on this: https://github.com/Intel-BMC/openbmc
Thanks,
Yong
-----Original Message-----
From: openbmc <openbmc-bounces+yong.b.li=linux.intel.com at lists.ozlabs.org
<mailto:openbmc-bounces+yong.b.li=linux.intel.com at lists.ozlabs.org> >
On Behalf Of Andrew Jeffery
Sent: Friday, August 30, 2019 12:42 PM
To: AKASH G J <akashgj91 at gmail.com <mailto:akashgj91 at gmail.com> >;
openbmc at lists.ozlabs.org <mailto:openbmc at lists.ozlabs.org>
Subject: Re: Enable KCS interface in zaius
On Thu, 29 Aug 2019, at 09:05, AKASH G J wrote:
> Hi all,
>
> I am using server platform with Intel processor and Aspeed AST-2500
> BMC. OpenBMC firmware with zaius configuration is used for BMC.
>
Zaius is an OpenPOWER platform (and our OpenPOWER platforms use the BT
interface rather than KCS). You're using an Intel-based processor for the
host, so perhaps it's better to start with an x86-based platform such as the
s2600wf. This should already have KCS IPMI enabled for you.
Andrew
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ozlabs.org/pipermail/openbmc/attachments/20190916/827b1c28/attachment-0001.htm>
More information about the openbmc
mailing list