September 2005 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Thu Sep 1 00:03:12 EST 2005
Ending: Fri Sep 30 23:58:48 EST 2005
Messages: 372

• Mapping huge user buffers for DMA   Clemens Koller
• Did anybody use netatalk on ppc??   Clemens Koller
  • [RFC] MPC5200 BestComm microcode [en]/[de]coding draft   Andrey Volkov
    • [RFC] MPC5200 BestComm microcode [en]/[de]coding draft   Wolfgang Denk
      • [RFC] MPC5200 BestComm microcode [en]/[de]coding draft   Andrey Volkov
      • [RFC] MPC5200 BestComm microcode [en]/[de]coding draft   Sylvain Munaut
• ??: Question about SMC serial port on MPC8270 in u-boot   Wolfgang Denk
• linuxppc-2.4.30-pre1 crashes with root fs on Xilinx SystemACE   Tony Lee
  • linuxppc-2.4.30-pre1 crashes with root fs on Xilinx SystemACE   Peter Ryser
    • linuxppc-2.4.30-pre1 crashes with root fs on Xilinx SystemACE   Keith J Outwater
• PayPal Account Security Measures   service at paypal.com
• Machine check - D-Cache search parity error occurs on a ppc440 core   Shawn Jin
• linux hangs after uncompress kernel image   lily
• A question regarding ramdisks   Adrian B. Weissman
  • A question regarding ramdisks   Murray.Jensen at csiro.au
  • A question regarding ramdisks   Shawn Jin
    • linux hangs after uncompress kernel image   John F Davis
      • linux hangs after uncompress kernel image   Sylvain Munaut
• Question about ELDK and i18n...   David Jander
  • Question about ELDK and i18n...   Wolfgang Denk
• [PATCH] MPC8xx PCMCIA driver   Dominik Brodowski
  • [PATCH] MPC8xx PCMCIA driver   Magnus Damm
  • [PATCH] MPC8xx PCMCIA driver   Marcelo Tosatti
  • [PATCH] MPC8xx PCMCIA driver   Marcelo Tosatti
    • [PATCH] MPC8xx PCMCIA driver   Dominik Brodowski
      • [PATCH] MPC8xx PCMCIA driver   Marcelo Tosatti
      • [PATCH] MPC8xx PCMCIA driver   Jeff Garzik
• Does the console have to be asigned to a serial or video driver ?   David H. Lynch Jr
• [PATCH 2.6.13-mm1] ppc32: mv64x60 updates & enhancements   Mark A. Greer
• [PATCH 2.6.13-mm1] ppc32: katana updates   Mark A. Greer
• [PATCH 2.6.13-mm1] ppc32: cpci690 updates   Mark A. Greer
• [PATCH] Add Flat OF tree support.   Pantelis Antoniou
• [PATCH] Support OF Flat Tree for embedded PPC   Pantelis Antoniou
• [PATCH 1/3] Support AMCC Yosemite 440EP and Yellowstone 440GR (v2)   John Otken
• [Patch 2/3] Add Yosemite Platform defconfig   John Otken
• [Patch 3/3] Add Yellowstone Platform defconfig   John Otken
• Promise Ultra 100 TX2 20268 chip receive "lost interrupt" error under 2.6.13 (ppc8540ads platform)   KylongMu
• reboot related questions   Jason Chen
• [PATCH] ppc32: fix ocp_device_suspend to use pm_message_t instead of u32   Eugene Surovegin
• [PATCH] ppc32: add missing sysfs node for ocp_func_emac_data.phy_feat_exc   Eugene Surovegin
• reboot   Jason Chen
• PCI on MPC827x   Alex Zeffertt
  • PCI on MPC827x   Vitaly Bordug
    • PCI on MPC827x   Alex Zeffertt
      • PCI on MPC827x   Jaap-Jan Boor
      • PCI on MPC827x   Vitaly Bordug
• Regarding the PPC board bringup with Linux 2.6 kernel   vinay hegde
  • Regarding the PPC board bringup with Linux 2.6 kernel   Wolfgang Denk
    • Regarding the PPC board bringup with Linux 2.6 kernel   Clemens Koller
      • Regarding the PPC board bringup with Linux 2.6 kernel   Robert P. J. Day
• Xilinx SystemACE driver for 2.6   Grant Likely
  • Xilinx SystemACE driver for 2.6   Jeff Angielski
  • How can I compile the module into kernel   zhonglei
• lost "Using multi-level CPM interrupts" option   徐小威的EMAIL
• ads8272 SEC problem on 2.4.18   Markus
  • ads8272 SEC problem on 2.4.18   Vikas Aggarwal
• newbie question : how to register for a new interrupt   Nuguru Susheel
  • newbie question : how to register for a new interrupt   Arthur Othieno
• How can I compile the module into kernel   Nuguru Susheel
• Platform devices on MPC8245   Mark Brown
  • Platform devices on MPC8245   Vitaly Bordug
    • Platform devices on MPC8245   Mark Brown
• MPC5200 Linux Init Problem   Frank Beesley
  • MPC5200 Linux Init Problem   Jeff Angielski
  • MPC5200 Linux Init Problem   Bob Peterson
    • MPC5200 Linux Init Problem   Frank Beesley
• How to implementing CLI using bison and FLEX   Pedro Aguilar
• [PATCH] add big endian version of ld_/st_ IO access macros and convert main 8xx code to use it   Marcelo Tosatti
  • [PATCH] add big endian version of ld_/st_ IO access macros and convert main 8xx code to use it   Benjamin Herrenschmidt
    • [PATCH] add big endian version of ld_/st_ IO access macros and convert main 8xx code to use it   Dan Malek
      • [PATCH] add big endian version of ld_/st_ IO access macros and convert main 8xx code to use it   Benjamin Herrenschmidt
      • [PATCH] add big endian version of ld_/st_ IO access macros and convert main 8xx code to use it   Marcelo Tosatti
      • [PATCH] add big endian version of ld_/st_ IO access macros and convert main 8xx code to use it   Paul Mackerras
      • [PATCH] add big endian version of ld_/st_ IO access macros and convert main 8xx code to use it   Dan Malek
      • [PATCH] add big endian version of ld_/st_ IO access macros and convert main 8xx code to use it   Marcelo Tosatti
    • [PATCH] add big endian version of ld_/st_ IO access macros and convert main 8xx code to use it   Marcelo Tosatti
      • [PATCH] add big endian version of ld_/st_ IO access macros and convert main 8xx code to use it   Benjamin Herrenschmidt
• BDI2000 with PPC405EP   Albert David
  • BDI2000 with PPC405EP   Eugene Surovegin
    • BDI2000 with PPC405EP   Albert David
• Can't run 8M ramdisk at 2.4.20 linux   徐小威的EMAIL
  • Can't run 8M ramdisk at 2.4.20 linux   Alex Zeffertt
• [PATCH] ppc32: Fix head_4xx.S compile error   Kumar Gala
  • How can I compile the module into kernel   gqbenjamin at 21cn.com
• [PATCH 2.6.13] ppc32: Correct an instruction in the boot code   Tom Rini
• [PATCH 2.6.13] ppc32: In the boot code, don't rely on BASE_BAUD directly   Tom Rini
• [PATCH 2.6.13] ppc32: Kill PVR_440* defines   Tom Rini
• cpu features testing 32 vs 64 bit   Becky Bruce
  • cpu features testing 32 vs 64 bit   Pantelis Antoniou
    • cpu features testing 32 vs 64 bit   Kumar Gala
    • cpu features testing 32 vs 64 bit   Dan Malek
    • cpu features testing 32 vs 64 bit   Kumar Gala
    • cpu features testing 32 vs 64 bit   Dan Malek
    • cpu features testing 32 vs 64 bit   Arnd Bergmann
    • cpu features testing 32 vs 64 bit   David Gibson
    • [PATCH] powerpc: merge include/asm/cputable.h   Arnd Bergmann
    • [PATCH] powerpc: merge include/asm/cputable.h   Kumar Gala
    • [PATCH] powerpc: merge include/asm/cputable.h   Arnd Bergmann
    • [PATCH] powerpc: merge include/asm/cputable.h   Kumar Gala
    • [PATCH] powerpc: merge include/asm/cputable.h   Arnd Bergmann
    • [PATCH] powerpc: merge include/asm/cputable.h   Kumar Gala
    • [PATCH] powerpc: merge include/asm/cputable.h   Arnd Bergmann
    • [PATCH] powerpc: merge include/asm/cputable.h   Kumar Gala
    • [PATCH] powerpc: merge include/asm/cputable.h   Arnd Bergmann
    • cpu features testing 32 vs 64 bit   Benjamin Herrenschmidt
• Can the mpc8270 provide the direct IDE interface?   FCG WANG Baohua
• Marvell MV64360 interrupt question   Walter L. Wimer III
  • Marvell MV64360 interrupt question   Walter L. Wimer III
    • Marvell MV64360 interrupt question   Brian Waite
  • Marvell MV64360 interrupt question   Dale Farnsworth
    • Marvell MV64360 interrupt question   Walter L. Wimer III
    • Marvell MV64360 interrupt question   Walter L. Wimer III
      • Marvell MV64360 interrupt question   Dale Farnsworth
      • Marvell MV64360 interrupt question   Mark A. Greer
      • Marvell MV64360 interrupt question   Brian Waite
• [PATCH] cpm_uart: Made non-console uart work   Murch, Christopher
  • [PATCH] cpm_uart: Made non-console uart work   Pantelis Antoniou
• [PATCH 0/2] RFC: Port Virtex-II Pro code to use the platform bus   Grant Likely
  • [PATCH 0/2] RFC: Port Virtex-II Pro code to use the platform bus   Grant Likely
• [PATCH 1/2] Move Virtex-II Pro / ML300 port over to the platform bus.   Grant Likely
  • [PATCH 1/2] Move Virtex-II Pro / ML300 port over to the platform bus.   Peter Korsgaard
• [PATCH 2/2] Add support for MEMEC 2VP30-FF1152 eval board with simple FPGA design   Grant Likely
  • [PATCH 2/2] Add support for MEMEC 2VP30-FF1152 eval board with simple FPGA design   Peter Korsgaard
    • [PATCH 2/2] Add support for MEMEC 2VP30-FF1152 eval board with simple FPGA design   Grant Likely
      • [PATCH 2/2] Add support for MEMEC 2VP30-FF1152 eval board with simple FPGA design   Peter Korsgaard
• Building Linux kernel with GCC 3.4.3 fails   IGOR LURI
• "Lost interrupt" with promise20268 PCI-IDE chard on mpc8540_ads platform!   KylongMu
  • "Lost interrupt" with promise20268 PCI-IDE chard on mpc8540_ads platform!   Clemens Koller
• [PATCH] cpm_uart: Made non-console uart work   Murch, Christopher
• Why IRQ8 infects the timer on mpc8541?   chao yu
• Re Re: "Lost interrupt" with promise20268 PCI-IDE chard on mpc8540_ads   KylongMu
• Re Re: "Lost interrupt" with promise20268 PCI-IDE chard onmpc8540_ads   Rune Torgersen
  • New message about: "Lost interrupt" with promise20268 PCI-IDE chard onmpc8540_ads   KylongMu
    • New message about: "Lost interrupt" with promise20268 PCI-IDE chard onmpc8540_ads   Clemens Koller
    • Help on 8260 board   prabha.j at tcs.com
      • Help on 8260 board   Alex Zeffertt
      • Help on 8260 board   Alex Zeffertt
      • Help on 8260 board   Tore Martin Hagen
• gdb hangs on Linux 2.6.11 on 8xx   Chris
  • gdb hangs on Linux 2.6.11 on 8xx   Aristeu Sergio Rozanski Filho
    • gdb hangs on Linux 2.6.11 on 8xx   Chris
    • gdb hangs on Linux 2.6.11 on 8xx   Marcelo Tosatti
      • gdb hangs on Linux 2.6.11 on 8xx   Aristeu Sergio Rozanski Filho
      • gdb hangs on Linux 2.6.11 on 8xx   Chris
    • gdb hangs on Linux 2.6.11 on 8xx   Marcelo Tosatti
      • gdb hangs on Linux 2.6.11 on 8xx   Aristeu Sergio Rozanski Filho
      • gdb hangs on Linux 2.6.11 on 8xx   Marcelo Tosatti
      • gdb hangs on Linux 2.6.11 on 8xx   Aristeu Sergio Rozanski Filho
      • gdb hangs on Linux 2.6.11 on 8xx   Marcelo Tosatti
      • gdb hangs on Linux 2.6.11 on 8xx   Aristeu Sergio Rozanski Filho
• USB root filesytem using a 2.6 kernel?   Jeff Stevens
  • USB root filesytem using a 2.6 kernel?   Peter Korsgaard
• Regarding booting the PPC board - issue with Ramdisk   vinay hegde
• [PATCH] ppc32 8xx: use io accessor macros instead of direct memory reference   Marcelo Tosatti
• __switch_to test-and-branch ALTIVEC specific?   Marcelo Tosatti
  • __switch_to test-and-branch ALTIVEC specific?   Kumar Gala
  • __switch_to test-and-branch ALTIVEC specific?   Marcelo Tosatti
  • __switch_to test-and-branch ALTIVEC specific?   Kumar Gala
  • __switch_to test-and-branch ALTIVEC specific?   Benjamin Herrenschmidt
  • __switch_to test-and-branch ALTIVEC specific?   Segher Boessenkool
  • __switch_to test-and-branch ALTIVEC specific?   Benjamin Herrenschmidt
  • -dev and -embedded cross-posting   Eugene Surovegin
  • __switch_to test-and-branch ALTIVEC specific?   Paul Mackerras
    • Interrupt mapping for MPC8541   Bizhan Gholikhamseh (bgholikh)
    • Account Review Team   PayPal
• How to modify MTD driver for MX29LV320ABTC-90?   徐小威的EMAIL
  • 1161 host   汪 秀平
• How to access linux symbols from dynamically loaded .so (dlopen)   Nishant Galange
• How to support LFS on ppc   JohnsonCheng
• How to modify MTD driver for MX29LV320ABTC-90?   Debora Liu
• How to support LFS on ppc   Fillod Stephane
  • How to support LFS on ppc   JohnsonCheng
• [PATCH 1/2] New PowerPC 4xx on-chip ethernet controller driver   Jeff Garzik
  • [PATCH 1/2] New PowerPC 4xx on-chip ethernet controller driver   Eugene Surovegin
  • [PATCH] New PowerPC 4xx on-chip ethernet controller driver   Eugene Surovegin
• MPC5200 : BAPI versions & processor revision   Frederic Janot
• A question regarding the Marvel 64360 and a MPC7447A   Adrian B. Weissman
• A question about the /dev/ide   FCG WANG Baohua
  • A question about the /dev/ide   Clemens Koller
• How to use kerberos in ELDK   JohnsonCheng
  • How to use kerberos in ELDK   Wolfgang Denk
    • How to use kerberos in ELDK   JohnsonCheng
• PPC4xx cleanup   Stefan Roese
  • PPC4xx cleanup   Matt Porter
    • PPC4xx cleanup   Dan Malek
      • PPC4xx cleanup   Matt Porter
    • [PATCH] ppc32: cleanup AMCC PPC4xx eval boards to better support U-Boot   Stefan Roese
      • [PATCH] ppc32: cleanup AMCC PPC4xx eval boards to better support U-Boot   Eugene Surovegin
      • [PATCH] ppc32: cleanup AMCC PPC4xx eval boards to better support U-Boot   Stefan Roese
      • [PATCH] ppc32: cleanup AMCC PPC4xx eval boards to better support U-Boot   Matt Porter
      • [PATCH] ppc32: cleanup AMCC PPC4xx eval boards to better support U-Boot   Stefan Roese
      • [PATCH] ppc32: cleanup AMCC PPC4xx eval boards to better support U-Boot   Matt Porter
      • [PATCH] ppc32: cleanup AMCC PPC4xx eval boards to better support U-Boot   Eugene Surovegin
    • [PATCH] ppc32: cleanup AMCC PPC44x eval boards to better support U-Boot   Stefan Roese
      • [PATCH] ppc32: cleanup AMCC PPC40x eval boards to support U-Boot   Stefan Roese
• HELLO   colaristide2
• Getting Perl on Embedded Linux PowerPC   Russell McGuire
  • Getting Perl on Embedded Linux PowerPC   Wolfgang Denk
  • Getting Perl on Embedded Linux PowerPC   Clemens Koller
• How to dump D-cache   Shawn Jin
• A mtd timeout issue on ppc   JohnsonCheng
• How to use kerberos in ELDK   Wolfgang Denk
  • How to use kerberos in ELDK   JohnsonCheng
  • Java on PowerPC   Rita Carvalho
    • Java on PowerPC   Marius Groeger
    • Java on PowerPC   Robert Swindells
• OpenSSL 0.9.8 compile error!   Ricardo Fialho Tafas Junior
• How to use kerberos in ELDK   Wolfgang Denk
  • How to use kerberos in ELDK   JohnsonCheng
• [PATCH] ppc32: Add ppc_sys descriptions for PowerQUICC I devices   Vitaly Bordug
• I2S MPC5200   Arnaud Carer
  • I2S MPC5200   Bob Peterson
  • OpenSSL 0.9.8 compile error!   Eli Brin
    • OpenSSL 0.9.8 compile error!   Ricardo Fialho Tafas Junior
• bseip config doesn't build   Kumar Gala
  • bseip config doesn't build   Dan Malek
    • bseip config doesn't build   Kumar Gala
• squashfs on ppc   Tolunay Orkun
  • squashfs on ppc   Eugene Surovegin
    • squashfs on ppc   Tolunay Orkun
• HELLO   jonaris0
• HELLO   jonaris0
• Cartoes UOL   cartoes at uol.com.br
• ATI Radeon M6-C16h for PPC 440GX   Roberto Pavon Sierra
• kernel 2.6.12.2, octobus ppc405EP: GUNZIP ERROR - must RESET board to recover   Peter Fercher
  • kernel 2.6.12.2, octobus ppc405EP: GUNZIP ERROR - must RESET board to recover   Wolfgang Denk
• Which way to store log in flash on mpc8xx?   David Jander
  • Which way to store log in flash on mpc8xx?   Frank
  • Which way to store log in flash on mpc8xx?   Wolfgang Denk
    • Which way to store log in flash on mpc8xx?   David Jander
      • Which way to store log in flash on mpc8xx?   Wolfgang Denk
      • Which way to store log in flash on mpc8xx?   David Jander
      • Which way to store log in flash on mpc8xx?   Wolfgang Denk
    • Which way to store log in flash on mpc8xx?   Shawn Jin
      • Which way to store log in flash on mpc8xx?   Jörn Engel
      • Which way to store log in flash on mpc8xx?   Wolfgang Denk
• emac driver broken in 2.6.12.2 ?   Peter Fercher
  • emac driver broken in 2.6.12.2 ?   Josh Boyer
  • emac driver broken in 2.6.12.2 ?   Stefan Roese
  • AW: emac driver broken in 2.6.12.2 ?   David Grab
• emac driver broken in 2.6.12.2 ?   Peter Fercher
  • emac driver broken in 2.6.12.2 ?   Josh Boyer
    • emac driver broken in 2.6.12.2 ?   Matt Porter
• 8250 serial driver on MPC8272ADS board   Landau, Bracha
  • 8250 serial driver on MPC8272ADS board   Vitaly Bordug
  • GT64260_eth (Ethernet) Driver   Earl Olsen
• [PATCH] Add support for USB to 440EP platform files   Wade Farnsworth
• Esse Cartao foi feito para voce   cartoes at terra.com.br
• porting Linux on ppc7a   smiling_23
  • porting Linux on ppc7a   Mark A. Greer
• MPC8250 MCC operating on 2-bit channels   Stevan Ignjatovic
• ELDK included in which AMCC440EP Kit?   KylongMu
  • ELDK included in which AMCC440EP Kit?   Wolfgang Denk
  • GT64260_eth (Ethernet) Driver   Earl Olsen
    • GT64260_eth (Ethernet) Driver   Brian Waite
      • GT64260_eth (Ethernet) Driver   Mark A. Greer
• MPC8250 MCC operating on 2-bit channels   Rune Torgersen
• wait_event and interrupts   Rune Torgersen
  • wait_event and interrupts   Jeff Angielski
  • wait_event and interrupts   Kalle Pokki
• wait_event and interrupts   Rune Torgersen
  • Which way to store log in flash on mpc8xx?   Eli Brin
• How to add user at linux 2.4.25 with eldk 3.1.1   徐小威的EMAIL
  • How to add user at linux 2.4.25 with eldk 3.1.1   Wolfgang Denk
• How to add user at linux 2.4.25 with eldk 3.1.1   Debora Liu
  • How to add user at linux 2.4.25 with eldk 3.1.1   Wolfgang Denk
• R: MPC8250 MCC operating on 2-bit channels   Figini Enzo
• using SCC4 on MPC8272ADS   Landau, Bracha
  • using SCC4 on MPC8272ADS   Vitaly Bordug
• using SCC4 on MPC8272ADS   Landau, Bracha
  • using SCC4 on MPC8272ADS   Vitaly Bordug
• Slow read performance of NAND flash on PPC 405EP   Andy Hawkins
• Slow read performance of NAND flash on PPC 405EP   Artem B. Bityutskiy
• Slow read performance of NAND flash on PPC 405EP   Artem B. Bityutskiy
• How to limit the log file size?   徐小威的EMAIL
  • How to limit the log file size?   Ricardo Scop
• [PATCH] ppc32: Fix configuration of PCI IO space on MPC85xx platform   Kumar Gala
• CPM2 early console   Kalle Pokki
• Bamboo Products   Tianyu Bamboo
• using SCC4 on MPC8272ADS   Landau, Bracha
• CPM2 early console   Rune Torgersen
  • CPM2 early console   Kumar Gala
  • CPM2 early console   Kalle Pokki
    • CPM2 early console   Kalle Pokki
      • CPM2 early console   Dan Malek
      • CPM2 early console   Kalle Pokki
      • CPM2 early console   Dan Malek
      • CPM2 early console   Kalle Pokki
      • CPM2 early console   Kalle Pokki
      • CPM2 early console   Dan Malek
      • CPM2 early console   Alex Zeffertt
      • CPM2 early console   Alex Zeffertt
      • CPM2 early console   Dan Malek
• Slow read performance of NAND flash on PPC 405EP   Conn Clark
• [PATCH 0/4] 440SPe support   Roland Dreier
• [PATCH 1/4] [PPC32] Allow ERPN for early serial to depend on CPU type   Roland Dreier
• [PATCH 2/4] [PPC32] Add 440SPe support   Roland Dreier
  • [PATCH 3/4] [PPC32] ibm_emac: Add 440SPe support   Roland Dreier
    • [PATCH 3/4] [PPC32] ibm_emac: Add 440SPe support   Eugene Surovegin
      • [PATCH 3/4] [PPC32] ibm_emac: Add 440SPe support   Roland Dreier
      • [PATCH 3/4] [PPC32] ibm_emac: Add 440SPe support   Eugene Surovegin
      • [PATCH 3/4] [PPC32] ibm_emac: Add 440SPe support   Roland Dreier
      • [PATCH 3/4] [PPC32] ibm_emac: Add 440SPe support   Matt Porter
      • [PATCH 3/4] [PPC32] ibm_emac: Add 440SPe support   Roland Dreier
      • [PATCH 3/4] [PPC32] ibm_emac: Add 440SPe support   Matt Porter
  • [PATCH 2/4] [PPC32] Add 440SPe support   Eugene Surovegin
    • [PATCH 2/4] [PPC32] Add 440SPe support   Roland Dreier
      • [PATCH 2/4] [PPC32] Add 440SPe support   Matt Porter
      • [PATCH 2/4] [PPC32] Add 440SPe support   Roland Dreier
  • [PATCH 2/4] [PPC32] Add 440SPe support   Matt Porter
    • [PATCH 2/4] [PPC32] Add 440SPe support   Roland Dreier
    • [PATCH 2/4] [PPC32] Add 440SPe support   Roland Dreier
      • [PATCH 2/4] [PPC32] Add 440SPe support   Eugene Surovegin
• [PATCH 4/4] [PPC32] Add Yucca (440SPe eval board) platform   Roland Dreier
  • [PATCH 4/4] [PPC32] Add Yucca (440SPe eval board) platform   Eugene Surovegin
    • [PATCH 4/4] [PPC32] Add Yucca (440SPe eval board) platform   Roland Dreier
• Linuxppc-embedded Digest, Vol 13, Issue 51   vanamali gouripeddi
• SPI bus master driver for the Freescale MPC52xx   Grant Likely
  • SPI bus master driver for the Freescale MPC52xx   Grant Likely
    • eBay: Notification!   Administrator
• Init ATI M6-C16h with BIOS for PPC 440GX   Roberto Pavon Sierra
• Slow read performance of NAND flash on PPC 405EP   Conn Clark
• [PATCH] Add support for XMON on AMCC 440GX   Tom Rini
• Hello-new comer ask a start question.   Jerry Zhou
  • Hello-new comer ask a start question.   David Jander
• A question about the linux root file system (ext2)   FCG WANG Baohua
• Kernel debugging problem on MPC5200.   TXEMA LOPEZ
  • AW: Kernel debugging problem on MPC5200.   Achim Machura
  • Kernel debugging problem on MPC5200.   Wolfgang Denk
  • Kernel debugging problem on MPC5200.   Matej Kupljen
  • (no subject)   ÏÄÓê
    • (no subject)   Wolfgang Denk
• How to use SPE on MPC8541   Gérard Guével
  • How to use SPE on MPC8541   Andy Fleming
  • How to use SPE on MPC8541   Gérard Guével
  • How to use SPE on MPC8541   Andy Fleming
  • How to use SPE on MPC8541   Gérard Guével
  • How to use SPE on MPC8541   Andy Fleming
  • How to use SPE on MPC8541   Gérard Guével
• Driver radeonfb for ATI M6 video controller   Roberto Pavon Sierra
  • Driver radeonfb for ATI M6 video controller   Stefan Nickl
• How to use SPE on MPC8541   Fillod Stephane
  • How to use SPE on MPC8541   Andy Fleming
• Installation XF86 in powerpc   Roberto Pavon Sierra
• Source of xparameter_ml300.h   Peter Ryser
  • booting and mounting PCIIDE: kernel access of bad area   KokHow Teh
• mpc5200 and pcmcia   Derycke, Johan
  • mpc5200 and pcmcia   Andrew Dennison
• $B$*$PMM$G2T$0!*!*(B   info at ssjhg.com
• $B;(;o$G$*Fk at w$_!#CO0hJL$K??7u$J=P2q$$(B   info at vhdue.com
• fix-up GIANFAR driver timer bug   sun
  • fix-up GIANFAR driver timer bug   Andy Fleming
  • how to make a PCI net card work on ICECUBE ?   ÏÄÓê
    • how to make a PCI net card work on ICECUBE ?   Wolfgang Denk
• mpc8xx and LCD   Fend, Matthias
  • mpc8xx and LCD   Mark Chambers
  • mpc8xx and LCD   Dan Malek
• BRG setting error   Borsodi Petr
  • BRG setting error   Dan Malek
• how to make a PCI net card work on ICECUBE ?   debora liu
• Available user-level tool for I2C device?   Sam Song
  • Available user-level tool for I2C device?   Eugene Surovegin
  • Available user-level tool for I2C device?   Tolunay Orkun
• where to find mkfs utility   JohnsonCheng
  • where to find mkfs utility   Wolfgang Denk
• MPC8555 and USB2   Laurent Lagrange
• AW: mpc8xx and LCD   Fend, Matthias
  • mpc8xx and LCD   Mark Chambers
    • mpc8xx and LCD   Chuck Meade
• AW: mpc8xx and LCD   Fend, Matthias
  • mpc8xx and LCD   Mark Chambers
  • AW: mpc8xx and LCD   Dan Malek

Last message date: Fri Sep 30 23:58:48 EST 2005
Archived on: Mon Jul 23 18:01:15 EST 2007

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...