September 2005 Archives by author

Messages sorted by: [ thread ] [ subject ] [ date ]
More info on this list...

Starting: Thu Sep 1 00:03:12 EST 2005
Ending: Fri Sep 30 23:58:48 EST 2005
Messages: 372

Interrupt mapping for MPC8541 Bizhan Gholikhamseh (bgholikh)
How can I compile the module into kernel gqbenjamin at 21cn.com
eBay: Notification! Administrator
ads8272 SEC problem on 2.4.18 Vikas Aggarwal
How to implementing CLI using bison and FLEX Pedro Aguilar
Xilinx SystemACE driver for 2.6 Jeff Angielski
MPC5200 Linux Init Problem Jeff Angielski
wait_event and interrupts Jeff Angielski
[PATCH] Add Flat OF tree support. Pantelis Antoniou
[PATCH] Support OF Flat Tree for embedded PPC Pantelis Antoniou
cpu features testing 32 vs 64 bit Pantelis Antoniou
[PATCH] cpm_uart: Made non-console uart work Pantelis Antoniou
Bamboo Products Tianyu Bamboo
Can the mpc8270 provide the direct IDE interface? FCG WANG Baohua
A question about the /dev/ide FCG WANG Baohua
A question about the linux root file system (ext2) FCG WANG Baohua
MPC5200 Linux Init Problem Frank Beesley
MPC5200 Linux Init Problem Frank Beesley
cpu features testing 32 vs 64 bit Arnd Bergmann
[PATCH] powerpc: merge include/asm/cputable.h Arnd Bergmann
[PATCH] powerpc: merge include/asm/cputable.h Arnd Bergmann
[PATCH] powerpc: merge include/asm/cputable.h Arnd Bergmann
[PATCH] powerpc: merge include/asm/cputable.h Arnd Bergmann
[PATCH] powerpc: merge include/asm/cputable.h Arnd Bergmann
Slow read performance of NAND flash on PPC 405EP Artem B. Bityutskiy
Slow read performance of NAND flash on PPC 405EP Artem B. Bityutskiy
__switch_to test-and-branch ALTIVEC specific? Segher Boessenkool
PCI on MPC827x Jaap-Jan Boor
PCI on MPC827x Vitaly Bordug
PCI on MPC827x Vitaly Bordug
Platform devices on MPC8245 Vitaly Bordug
[PATCH] ppc32: Add ppc_sys descriptions for PowerQUICC I devices Vitaly Bordug
8250 serial driver on MPC8272ADS board Vitaly Bordug
using SCC4 on MPC8272ADS Vitaly Bordug
using SCC4 on MPC8272ADS Vitaly Bordug
emac driver broken in 2.6.12.2 ? Josh Boyer
emac driver broken in 2.6.12.2 ? Josh Boyer
OpenSSL 0.9.8 compile error! Eli Brin
Which way to store log in flash on mpc8xx? Eli Brin
[PATCH] MPC8xx PCMCIA driver Dominik Brodowski
[PATCH] MPC8xx PCMCIA driver Dominik Brodowski
Platform devices on MPC8245 Mark Brown
Platform devices on MPC8245 Mark Brown
cpu features testing 32 vs 64 bit Becky Bruce
I2S MPC5200 Arnaud Carer
Java on PowerPC Rita Carvalho
mpc8xx and LCD Mark Chambers
mpc8xx and LCD Mark Chambers
mpc8xx and LCD Mark Chambers
reboot related questions Jason Chen
reboot Jason Chen
gdb hangs on Linux 2.6.11 on 8xx Chris
gdb hangs on Linux 2.6.11 on 8xx Chris
gdb hangs on Linux 2.6.11 on 8xx Chris
Slow read performance of NAND flash on PPC 405EP Conn Clark
Slow read performance of NAND flash on PPC 405EP Conn Clark
[PATCH] MPC8xx PCMCIA driver Magnus Damm
BDI2000 with PPC405EP Albert David
BDI2000 with PPC405EP Albert David
linux hangs after uncompress kernel image John F Davis
Regarding the PPC board bringup with Linux 2.6 kernel Robert P. J. Day
??: Question about SMC serial port on MPC8270 in u-boot Wolfgang Denk
[RFC] MPC5200 BestComm microcode [en]/[de]coding draft Wolfgang Denk
Question about ELDK and i18n... Wolfgang Denk
Regarding the PPC board bringup with Linux 2.6 kernel Wolfgang Denk
How to use kerberos in ELDK Wolfgang Denk
Getting Perl on Embedded Linux PowerPC Wolfgang Denk
How to use kerberos in ELDK Wolfgang Denk
How to use kerberos in ELDK Wolfgang Denk
kernel 2.6.12.2, octobus ppc405EP: GUNZIP ERROR - must RESET board to recover Wolfgang Denk
Which way to store log in flash on mpc8xx? Wolfgang Denk
Which way to store log in flash on mpc8xx? Wolfgang Denk
Which way to store log in flash on mpc8xx? Wolfgang Denk
Which way to store log in flash on mpc8xx? Wolfgang Denk
ELDK included in which AMCC440EP Kit? Wolfgang Denk
How to add user at linux 2.4.25 with eldk 3.1.1 Wolfgang Denk
How to add user at linux 2.4.25 with eldk 3.1.1 Wolfgang Denk
Kernel debugging problem on MPC5200. Wolfgang Denk
(no subject) Wolfgang Denk
how to make a PCI net card work on ICECUBE ? Wolfgang Denk
where to find mkfs utility Wolfgang Denk
mpc5200 and pcmcia Andrew Dennison
mpc5200 and pcmcia Derycke, Johan
[PATCH 0/4] 440SPe support Roland Dreier
[PATCH 1/4] [PPC32] Allow ERPN for early serial to depend on CPU type Roland Dreier
[PATCH 2/4] [PPC32] Add 440SPe support Roland Dreier
[PATCH 3/4] [PPC32] ibm_emac: Add 440SPe support Roland Dreier
[PATCH 4/4] [PPC32] Add Yucca (440SPe eval board) platform Roland Dreier
[PATCH 3/4] [PPC32] ibm_emac: Add 440SPe support Roland Dreier
[PATCH 2/4] [PPC32] Add 440SPe support Roland Dreier
[PATCH 4/4] [PPC32] Add Yucca (440SPe eval board) platform Roland Dreier
[PATCH 3/4] [PPC32] ibm_emac: Add 440SPe support Roland Dreier
[PATCH 3/4] [PPC32] ibm_emac: Add 440SPe support Roland Dreier
[PATCH 2/4] [PPC32] Add 440SPe support Roland Dreier
[PATCH 2/4] [PPC32] Add 440SPe support Roland Dreier
[PATCH 2/4] [PPC32] Add 440SPe support Roland Dreier
Which way to store log in flash on mpc8xx? Jörn Engel
R: MPC8250 MCC operating on 2-bit channels Figini Enzo
Marvell MV64360 interrupt question Dale Farnsworth
Marvell MV64360 interrupt question Dale Farnsworth
[PATCH] Add support for USB to 440EP platform files Wade Farnsworth
mpc8xx and LCD Fend, Matthias
AW: mpc8xx and LCD Fend, Matthias
AW: mpc8xx and LCD Fend, Matthias
kernel 2.6.12.2, octobus ppc405EP: GUNZIP ERROR - must RESET board to recover Peter Fercher
emac driver broken in 2.6.12.2 ? Peter Fercher
emac driver broken in 2.6.12.2 ? Peter Fercher
gdb hangs on Linux 2.6.11 on 8xx Aristeu Sergio Rozanski Filho
gdb hangs on Linux 2.6.11 on 8xx Aristeu Sergio Rozanski Filho
gdb hangs on Linux 2.6.11 on 8xx Aristeu Sergio Rozanski Filho
gdb hangs on Linux 2.6.11 on 8xx Aristeu Sergio Rozanski Filho
gdb hangs on Linux 2.6.11 on 8xx Aristeu Sergio Rozanski Filho
How to use SPE on MPC8541 Andy Fleming
How to use SPE on MPC8541 Andy Fleming
How to use SPE on MPC8541 Andy Fleming
How to use SPE on MPC8541 Andy Fleming
fix-up GIANFAR driver timer bug Andy Fleming
Which way to store log in flash on mpc8xx? Frank
[PATCH] ppc32: Fix head_4xx.S compile error Kumar Gala
cpu features testing 32 vs 64 bit Kumar Gala
cpu features testing 32 vs 64 bit Kumar Gala
__switch_to test-and-branch ALTIVEC specific? Kumar Gala
__switch_to test-and-branch ALTIVEC specific? Kumar Gala
[PATCH] powerpc: merge include/asm/cputable.h Kumar Gala
[PATCH] powerpc: merge include/asm/cputable.h Kumar Gala
[PATCH] powerpc: merge include/asm/cputable.h Kumar Gala
bseip config doesn't build Kumar Gala
bseip config doesn't build Kumar Gala
[PATCH] powerpc: merge include/asm/cputable.h Kumar Gala
[PATCH] ppc32: Fix configuration of PCI IO space on MPC85xx platform Kumar Gala
CPM2 early console Kumar Gala
How to access linux symbols from dynamically loaded .so (dlopen) Nishant Galange
[PATCH 1/2] New PowerPC 4xx on-chip ethernet controller driver Jeff Garzik
[PATCH] MPC8xx PCMCIA driver Jeff Garzik
cpu features testing 32 vs 64 bit David Gibson
AW: emac driver broken in 2.6.12.2 ? David Grab
[PATCH 2.6.13-mm1] ppc32: mv64x60 updates & enhancements Mark A. Greer
[PATCH 2.6.13-mm1] ppc32: katana updates Mark A. Greer
[PATCH 2.6.13-mm1] ppc32: cpci690 updates Mark A. Greer
Marvell MV64360 interrupt question Mark A. Greer
GT64260_eth (Ethernet) Driver Mark A. Greer
porting Linux on ppc7a Mark A. Greer
Java on PowerPC Marius Groeger
How to use SPE on MPC8541 Gérard Guével
How to use SPE on MPC8541 Gérard Guével
How to use SPE on MPC8541 Gérard Guével
How to use SPE on MPC8541 Gérard Guével
Help on 8260 board Tore Martin Hagen
Slow read performance of NAND flash on PPC 405EP Andy Hawkins
[PATCH] add big endian version of ld_/st_ IO access macros and convert main 8xx code to use it Benjamin Herrenschmidt
[PATCH] add big endian version of ld_/st_ IO access macros and convert main 8xx code to use it Benjamin Herrenschmidt
[PATCH] add big endian version of ld_/st_ IO access macros and convert main 8xx code to use it Benjamin Herrenschmidt
cpu features testing 32 vs 64 bit Benjamin Herrenschmidt
__switch_to test-and-branch ALTIVEC specific? Benjamin Herrenschmidt
__switch_to test-and-branch ALTIVEC specific? Benjamin Herrenschmidt
Marvell MV64360 interrupt question Walter L. Wimer III
Marvell MV64360 interrupt question Walter L. Wimer III
Marvell MV64360 interrupt question Walter L. Wimer III
Marvell MV64360 interrupt question Walter L. Wimer III
MPC8250 MCC operating on 2-bit channels Stevan Ignjatovic
Question about ELDK and i18n... David Jander
Which way to store log in flash on mpc8xx? David Jander
Which way to store log in flash on mpc8xx? David Jander
Which way to store log in flash on mpc8xx? David Jander
Hello-new comer ask a start question. David Jander
MPC5200 : BAPI versions & processor revision Frederic Janot
Machine check - D-Cache search parity error occurs on a ppc440 core Shawn Jin
A question regarding ramdisks Shawn Jin
How to dump D-cache Shawn Jin
Which way to store log in flash on mpc8xx? Shawn Jin
How to support LFS on ppc JohnsonCheng
How to support LFS on ppc JohnsonCheng
How to use kerberos in ELDK JohnsonCheng
How to use kerberos in ELDK JohnsonCheng
A mtd timeout issue on ppc JohnsonCheng
How to use kerberos in ELDK JohnsonCheng
How to use kerberos in ELDK JohnsonCheng
where to find mkfs utility JohnsonCheng
Does the console have to be asigned to a serial or video driver ? David H. Lynch Jr
OpenSSL 0.9.8 compile error! Ricardo Fialho Tafas Junior
OpenSSL 0.9.8 compile error! Ricardo Fialho Tafas Junior
Mapping huge user buffers for DMA Clemens Koller
Did anybody use netatalk on ppc?? Clemens Koller
Regarding the PPC board bringup with Linux 2.6 kernel Clemens Koller
"Lost interrupt" with promise20268 PCI-IDE chard on mpc8540_ads platform! Clemens Koller
New message about: "Lost interrupt" with promise20268 PCI-IDE chard onmpc8540_ads Clemens Koller
A question about the /dev/ide Clemens Koller
Getting Perl on Embedded Linux PowerPC Clemens Koller
USB root filesytem using a 2.6 kernel? Peter Korsgaard
[PATCH 1/2] Move Virtex-II Pro / ML300 port over to the platform bus. Peter Korsgaard
[PATCH 2/2] Add support for MEMEC 2VP30-FF1152 eval board with simple FPGA design Peter Korsgaard
[PATCH 2/2] Add support for MEMEC 2VP30-FF1152 eval board with simple FPGA design Peter Korsgaard
Kernel debugging problem on MPC5200. Matej Kupljen
Promise Ultra 100 TX2 20268 chip receive "lost interrupt" error under 2.6.13 (ppc8540ads platform) KylongMu
"Lost interrupt" with promise20268 PCI-IDE chard on mpc8540_ads platform! KylongMu
Re Re: "Lost interrupt" with promise20268 PCI-IDE chard on mpc8540_ads KylongMu
New message about: "Lost interrupt" with promise20268 PCI-IDE chard onmpc8540_ads KylongMu
ELDK included in which AMCC440EP Kit? KylongMu
Kernel debugging problem on MPC5200. TXEMA LOPEZ
Building Linux kernel with GCC 3.4.3 fails IGOR LURI
MPC8555 and USB2 Laurent Lagrange
8250 serial driver on MPC8272ADS board Landau, Bracha
using SCC4 on MPC8272ADS Landau, Bracha
using SCC4 on MPC8272ADS Landau, Bracha
using SCC4 on MPC8272ADS Landau, Bracha
linuxppc-2.4.30-pre1 crashes with root fs on Xilinx SystemACE Tony Lee
Xilinx SystemACE driver for 2.6 Grant Likely
[PATCH 0/2] RFC: Port Virtex-II Pro code to use the platform bus Grant Likely
[PATCH 1/2] Move Virtex-II Pro / ML300 port over to the platform bus. Grant Likely
[PATCH 2/2] Add support for MEMEC 2VP30-FF1152 eval board with simple FPGA design Grant Likely
[PATCH 0/2] RFC: Port Virtex-II Pro code to use the platform bus Grant Likely
[PATCH 2/2] Add support for MEMEC 2VP30-FF1152 eval board with simple FPGA design Grant Likely
SPI bus master driver for the Freescale MPC52xx Grant Likely
SPI bus master driver for the Freescale MPC52xx Grant Likely
How to modify MTD driver for MX29LV320ABTC-90? Debora Liu
How to add user at linux 2.4.25 with eldk 3.1.1 Debora Liu
AW: Kernel debugging problem on MPC5200. Achim Machura
[PATCH] add big endian version of ld_/st_ IO access macros and convert main 8xx code to use it Paul Mackerras
__switch_to test-and-branch ALTIVEC specific? Paul Mackerras
[PATCH] add big endian version of ld_/st_ IO access macros and convert main 8xx code to use it Dan Malek
[PATCH] add big endian version of ld_/st_ IO access macros and convert main 8xx code to use it Dan Malek
cpu features testing 32 vs 64 bit Dan Malek
cpu features testing 32 vs 64 bit Dan Malek
PPC4xx cleanup Dan Malek
bseip config doesn't build Dan Malek
CPM2 early console Dan Malek
CPM2 early console Dan Malek
BRG setting error Dan Malek
CPM2 early console Dan Malek
mpc8xx and LCD Dan Malek
AW: mpc8xx and LCD Dan Malek
CPM2 early console Dan Malek
ads8272 SEC problem on 2.4.18 Markus
Getting Perl on Embedded Linux PowerPC Russell McGuire
mpc8xx and LCD Chuck Meade
[RFC] MPC5200 BestComm microcode [en]/[de]coding draft Sylvain Munaut
linux hangs after uncompress kernel image Sylvain Munaut
[PATCH] cpm_uart: Made non-console uart work Murch, Christopher
[PATCH] cpm_uart: Made non-console uart work Murch, Christopher
Driver radeonfb for ATI M6 video controller Stefan Nickl
GT64260_eth (Ethernet) Driver Earl Olsen
GT64260_eth (Ethernet) Driver Earl Olsen
squashfs on ppc Tolunay Orkun
squashfs on ppc Tolunay Orkun
Available user-level tool for I2C device? Tolunay Orkun
newbie question : how to register for a new interrupt Arthur Othieno
[PATCH 1/3] Support AMCC Yosemite 440EP and Yellowstone 440GR (v2) John Otken
[Patch 2/3] Add Yosemite Platform defconfig John Otken
[Patch 3/3] Add Yellowstone Platform defconfig John Otken
linuxppc-2.4.30-pre1 crashes with root fs on Xilinx SystemACE Keith J Outwater
Account Review Team PayPal
MPC5200 Linux Init Problem Bob Peterson
I2S MPC5200 Bob Peterson
BRG setting error Borsodi Petr
wait_event and interrupts Kalle Pokki
CPM2 early console Kalle Pokki
CPM2 early console Kalle Pokki
CPM2 early console Kalle Pokki
CPM2 early console Kalle Pokki
CPM2 early console Kalle Pokki
CPM2 early console Kalle Pokki
PPC4xx cleanup Matt Porter
[PATCH] ppc32: cleanup AMCC PPC4xx eval boards to better support U-Boot Matt Porter
PPC4xx cleanup Matt Porter
emac driver broken in 2.6.12.2 ? Matt Porter
[PATCH] ppc32: cleanup AMCC PPC4xx eval boards to better support U-Boot Matt Porter
[PATCH 3/4] [PPC32] ibm_emac: Add 440SPe support Matt Porter
[PATCH 2/4] [PPC32] Add 440SPe support Matt Porter
[PATCH 2/4] [PPC32] Add 440SPe support Matt Porter
[PATCH 3/4] [PPC32] ibm_emac: Add 440SPe support Matt Porter
[PATCH 2.6.13] ppc32: Correct an instruction in the boot code Tom Rini
[PATCH 2.6.13] ppc32: In the boot code, don't rely on BASE_BAUD directly Tom Rini
[PATCH 2.6.13] ppc32: Kill PVR_440* defines Tom Rini
[PATCH] Add support for XMON on AMCC 440GX Tom Rini
PPC4xx cleanup Stefan Roese
[PATCH] ppc32: cleanup AMCC PPC4xx eval boards to better support U-Boot Stefan Roese
[PATCH] ppc32: cleanup AMCC PPC4xx eval boards to better support U-Boot Stefan Roese
[PATCH] ppc32: cleanup AMCC PPC44x eval boards to better support U-Boot Stefan Roese
emac driver broken in 2.6.12.2 ? Stefan Roese
[PATCH] ppc32: cleanup AMCC PPC4xx eval boards to better support U-Boot Stefan Roese
[PATCH] ppc32: cleanup AMCC PPC40x eval boards to support U-Boot Stefan Roese
linuxppc-2.4.30-pre1 crashes with root fs on Xilinx SystemACE Peter Ryser
Source of xparameter_ml300.h Peter Ryser
How to limit the log file size? Ricardo Scop
ATI Radeon M6-C16h for PPC 440GX Roberto Pavon Sierra
Init ATI M6-C16h with BIOS for PPC 440GX Roberto Pavon Sierra
Driver radeonfb for ATI M6 video controller Roberto Pavon Sierra
Installation XF86 in powerpc Roberto Pavon Sierra
Available user-level tool for I2C device? Sam Song
How to support LFS on ppc Fillod Stephane
How to use SPE on MPC8541 Fillod Stephane
USB root filesytem using a 2.6 kernel? Jeff Stevens
[PATCH] ppc32: fix ocp_device_suspend to use pm_message_t instead of u32 Eugene Surovegin
[PATCH] ppc32: add missing sysfs node for ocp_func_emac_data.phy_feat_exc Eugene Surovegin
BDI2000 with PPC405EP Eugene Surovegin
-dev and -embedded cross-posting Eugene Surovegin
[PATCH 1/2] New PowerPC 4xx on-chip ethernet controller driver Eugene Surovegin
[PATCH] New PowerPC 4xx on-chip ethernet controller driver Eugene Surovegin
[PATCH] ppc32: cleanup AMCC PPC4xx eval boards to better support U-Boot Eugene Surovegin
squashfs on ppc Eugene Surovegin
[PATCH] ppc32: cleanup AMCC PPC4xx eval boards to better support U-Boot Eugene Surovegin
[PATCH 3/4] [PPC32] ibm_emac: Add 440SPe support Eugene Surovegin
[PATCH 2/4] [PPC32] Add 440SPe support Eugene Surovegin
[PATCH 4/4] [PPC32] Add Yucca (440SPe eval board) platform Eugene Surovegin
[PATCH 3/4] [PPC32] ibm_emac: Add 440SPe support Eugene Surovegin
[PATCH 2/4] [PPC32] Add 440SPe support Eugene Surovegin
Available user-level tool for I2C device? Eugene Surovegin
newbie question : how to register for a new interrupt Nuguru Susheel
How can I compile the module into kernel Nuguru Susheel
Java on PowerPC Robert Swindells
booting and mounting PCIIDE: kernel access of bad area KokHow Teh
Re Re: "Lost interrupt" with promise20268 PCI-IDE chard onmpc8540_ads Rune Torgersen
MPC8250 MCC operating on 2-bit channels Rune Torgersen
wait_event and interrupts Rune Torgersen
wait_event and interrupts Rune Torgersen
CPM2 early console Rune Torgersen
[PATCH] MPC8xx PCMCIA driver Marcelo Tosatti
[PATCH] add big endian version of ld_/st_ IO access macros and convert main 8xx code to use it Marcelo Tosatti
[PATCH] add big endian version of ld_/st_ IO access macros and convert main 8xx code to use it Marcelo Tosatti
[PATCH] add big endian version of ld_/st_ IO access macros and convert main 8xx code to use it Marcelo Tosatti
[PATCH] add big endian version of ld_/st_ IO access macros and convert main 8xx code to use it Marcelo Tosatti
gdb hangs on Linux 2.6.11 on 8xx Marcelo Tosatti
gdb hangs on Linux 2.6.11 on 8xx Marcelo Tosatti
[PATCH] ppc32 8xx: use io accessor macros instead of direct memory reference Marcelo Tosatti
__switch_to test-and-branch ALTIVEC specific? Marcelo Tosatti
gdb hangs on Linux 2.6.11 on 8xx Marcelo Tosatti
__switch_to test-and-branch ALTIVEC specific? Marcelo Tosatti
[PATCH] MPC8xx PCMCIA driver Marcelo Tosatti
[PATCH] MPC8xx PCMCIA driver Marcelo Tosatti
gdb hangs on Linux 2.6.11 on 8xx Marcelo Tosatti
[RFC] MPC5200 BestComm microcode [en]/[de]coding draft Andrey Volkov
[RFC] MPC5200 BestComm microcode [en]/[de]coding draft Andrey Volkov
Marvell MV64360 interrupt question Brian Waite
Marvell MV64360 interrupt question Brian Waite
GT64260_eth (Ethernet) Driver Brian Waite
A question regarding ramdisks Adrian B. Weissman
A question regarding the Marvel 64360 and a MPC7447A Adrian B. Weissman
PCI on MPC827x Alex Zeffertt
PCI on MPC827x Alex Zeffertt
Can't run 8M ramdisk at 2.4.20 linux Alex Zeffertt
Help on 8260 board Alex Zeffertt
Help on 8260 board Alex Zeffertt
CPM2 early console Alex Zeffertt
CPM2 early console Alex Zeffertt
Hello-new comer ask a start question. Jerry Zhou
HELLO colaristide2
A question regarding ramdisks Murray.Jensen at csiro.au
Linuxppc-embedded Digest, Vol 13, Issue 51 vanamali gouripeddi
Regarding the PPC board bringup with Linux 2.6 kernel vinay hegde
Regarding booting the PPC board - issue with Ramdisk vinay hegde
HELLO jonaris0
HELLO jonaris0
linux hangs after uncompress kernel image lily
how to make a PCI net card work on ICECUBE ? debora liu
PayPal Account Security Measures service at paypal.com
porting Linux on ppc7a smiling_23
$B$*$PMM$G2T$0!*!*(B info at ssjhg.com
fix-up GIANFAR driver timer bug sun
Help on 8260 board prabha.j at tcs.com
Esse Cartao foi feito para voce cartoes at terra.com.br
Cartoes UOL cartoes at uol.com.br
$B;(;o$G$*Fk at w$_!#CO0hJL$K??7u$J=P2q$$(B info at vhdue.com
Why IRQ8 infects the timer on mpc8541? chao yu
How can I compile the module into kernel zhonglei
(no subject) ÏÄÓê
how to make a PCI net card work on ICECUBE ? ÏÄÓê
lost "Using multi-level CPM interrupts" option 徐小威的EMAIL
Can't run 8M ramdisk at 2.4.20 linux 徐小威的EMAIL
How to modify MTD driver for MX29LV320ABTC-90? 徐小威的EMAIL
How to add user at linux 2.4.25 with eldk 3.1.1 徐小威的EMAIL
How to limit the log file size? 徐小威的EMAIL
1161 host 汪秀平

Last message date: Fri Sep 30 23:58:48 EST 2005
Archived on: Mon Jul 23 18:01:15 EST 2007

Messages sorted by: [ thread ] [ subject ] [ date ]
More info on this list...

This archive was generated by Pipermail 0.09 (Mailman edition).