how to make a PCI net card work on ICECUBE ?

[Wolfgang Denk]

In message <200509291156.AA2359564 at NARI-RELAYS.COM> you wrote:
> 
> I found out that the ICECUBE board could tftpboot via the PCI netcard if wire net to the card, but the board could not mount NFS via the card.
> 
> So i set the environment ethact to i82559#0 and saveenv , but the board still could not mount NFS via the card.During the booting-up ,there was nothing about eth1 shown .
...
> bash-2.05b# ifconfig eth1 198.87.102.218 up
> SIOCSIFADDR: No such device
> eth1: unknown interface: No such device
> eth1: unknown interface: No such device 
> 
> where did i make mistakes ?

I guess you forgot to configure the correct driver for  your  network
card into your Linux kernel.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Old programmers never die, they just branch to a new address.