emac driver broken in 2.6.12.2 ?

[Peter Fercher]

hi,

when you read the output I have pasted there you can see the following (also
in my origninal mail)
eth0: IBM emac, MAC 00:00:00:00:00:00

eth0: Found Generic MII PHY (0x00)

eth1: IBM emac, MAC 00:00:00:00:00:00

eth1: Found Generic MII PHY (0x01)


I think that this MAC addresses are crap (sorry if not formulated clearly
enough for you ;)
am I wrong ?

cheers, peter

> -----Original Message-----
> From: Josh Boyer [mailto:jwboyer at jdub.homelinux.org] 
> Sent: Montag, 19. September 2005 15:42
> To: Peter Fercher
> Cc: benh at kernel.crashing.org; linux-ppc-embedded
> Subject: Re: emac driver broken in 2.6.12.2 ?
> 
> 
> On Mon, 2005-09-19 at 15:37 +0200, Peter Fercher wrote:
> > hi,
> >  
> > i have problems with the IBM EMAC with 2.6.12.2 (the driver worked 
> > with 2.4.25) running on ppc405EP octobus board. Cross 
> compiled on x86 
> > using the eldk-3.1 toolchain
> >  
> > any hints ?
> 
> I think you'd need to be more explicit about what "problems" 
> means. Hard to give hints with what you have here.
> 
> josh
> 
> 
> 

hi,
 
i have problems with the IBM EMAC with 2.6.12.2 (the driver worked with
2.4.25)
running on ppc405EP octobus board. Cross compiled on x86 using the eldk-3.1
toolchain
 
any hints ?
 
emac: IBM EMAC Ethernet driver, version 2.0

Maintained by Benjamin Herrenschmidt <benh at kernel.crashing.org>

eth0: IBM emac, MAC 00:00:00:00:00:00

eth0: Found Generic MII PHY (0x00)

eth1: IBM emac, MAC 00:00:00:00:00:00

eth1: Found Generic MII PHY (0x01)

 
cheers, peter
---------------------------------------------------------
Supercomputing Systems AG    phone:  +41 (0)43 456 16 31
Peter Fercher                fax:    +41 (0)43 456 16 10
Technoparkstrasse 1          email:  peter.fercher at scs.ch
CH-8005 Zuerich              url:    http://www.scs.ch 
---------------------------------------------------------