June 2006 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Thu Jun 1 01:40:50 EST 2006
Ending: Fri Jun 30 22:51:05 EST 2006
Messages: 312

• howto allocate memory using scatter/gather   Muneeswaran P - TLS, Chennai
• Linux 2.4 Kernel on Xilinx Virtex4 FX100's PPC   Anantharaman Chetan-W16155
• Linux 2.4 Kernel on Xilinx Virtex4 FX100's PPC   Grant Likely
• Help with MPC5200 + Bestcomm + Local Plus Bus   roger blofeld
• Linux 2.4 Kernel on Xilinx Virtex4 FX100's PPC   Anantharaman Chetan-W16155
• Linux 2.4 Kernel on Xilinx Virtex4 FX100's PPC   Aidan Williams
• Linux 2.4 Kernel on Xilinx Virtex4 FX100's PPC   Grant Likely
• Setting I&D cache enable in the same mtspr instruction   Becky Bruce
• Linux 2.4 Kernel on Xilinx Virtex4 FX100's PPC   Anantharaman Chetan-W16155
• AW: MPC8270 on Microsys PM827 Kernel 2.6 Oops: kernel access of bad area, sig: 11 [#1]   Wolfgang Denk
• Can't get CoralP drivers to work (fixed)   jourdan at enib.fr
• Linux 2.4 Kernel on Xilinx Virtex4 FX100's PPC   Peter Ryser
• memset hangs part way through; called from early_init   Chris Dumoulin
• Linux 2.4 Kernel on Xilinx Virtex4 FX100's PPC   Peter Ryser
• Linux 2.4 Kernel on Xilinx Virtex4 FX100's PPC   Grant Likely
• Linux 2.4 Kernel on Xilinx Virtex4 FX100's PPC   Peter Ryser
• Pinned TLB entries with 2.6 linux kernel on PPC4xx   Chris Dumoulin
• Pinned TLB entries with 2.6 linux kernel on PPC4xx   Eugene Surovegin
• memset hangs part way through; called from early_init   Wolfgang Denk
• Pinned TLB entries with 2.6 linux kernel on PPC4xx   Matt Porter
• MPC85xx PCI transfer disconnect   Martin, Tim
• MPC85xx PCI transfer disconnect   Liu Dave-r63238
• USB on MPC8349 with MPH controller   almoeli at gmx.de
• MPC880 cannot use SCC4 together with FECs   Antonio Di Bacco
• 8xx spi completion sometime doesn't generate an interrupt   Antonio Di Bacco
• MPC85xx PCI transfer disconnect   Martin, Tim
• MPC85xx PCI transfer disconnect   Martin, Tim
• 8xx spi completion sometime doesn't generate an interrupt   Wolfgang Denk
• 8xx spi completion sometime doesn't generate an interrupt   Antonio Di Bacco
• USB on MPC8349 with MPH controller   Randy Vinson
• 8xx spi completion sometime doesn't generate an interrupt   Wolfgang Denk
• m25pe80 dataflash: put 50 usec between WREN and PW instructions   Antonio Di Bacco
• Making Two ethernet interfaces up in Linux   Shantanu Nalage
• Making Two ethernet interfaces up in Linux   Antonio Di Bacco
• MPC85xx PCI transfer disconnect   Liu Dave-r63238
• Making Two ethernet interfaces up in Linux   Andy Fleming
• ppc85xx DMA   Naru Sundar
• ppc85xx DMA   Liu Dave-r63238
• Using RS232 Terminal as input device   hbruegge at rockwellcollins.com
• eth0: tx queue full   salvatore cusenza
• eth0: tx queue full   Li Yang-r58472
• Linux kernel thread with Linux 2.6.x   Laurent Lagrange
• eth0: tx queue full   Steve Iribarne (GMail)
• ppc85xx DMA   Naru Sundar
• eth0: tx queue full   Wolfgang Denk
• ppc85xx DMA   Naru Sundar
• ppc85xx DMA   Naru Sundar
• 82xx CPM commands   Rune Torgersen
• Problem in PCI with MPC5200B   Ram Prasad H L
• Problem in PCI with MPC5200B   Sylvain Munaut
• CPM_UART should allocate DPRAM for SMCx parameter RAM on MPC82xx   Laurent Pinchart
• CPM_UART should allocate DPRAM for SMCx parameter RAM on MPC82xx   Vitaly Bordug
• CPM_UART should allocate DPRAM for SMCx parameter RAM on MPC82xx   Laurent Pinchart
• CPM_UART should allocate DPRAM for SMCx parameter RAM on MPC82xx   Vitaly Bordug
• *** PROBABLY SPAM *** Re: CPM_UART should allocate DPRAM for SMCx parameter RAM on MPC82xx   Laurent Pinchart
• CPM_UART should allocate DPRAM for SMCx parameter RAM on MPC82xx   Dan Malek
• MPC5200B SPI PSC3 Problem   Trueskew
• Making Two ethernet interfaces up in Linux   Shantanu Nalage
• does Gianfar Ethernet Controller Version 1.1 support MARVELL 88E1111?   郭 剑非
• does Gianfar Ethernet Controller Version 1.1 support MARVELL 88E1111?   Liu Dave-r63238
• No subject   huseyin_yeter1977
• a problem of kernel-module version mismatch.   Ming Liu
• a problem of kernel-module version mismatch.   Arnd Bergmann
• a problem of kernel-module version mismatch.   Ming Liu
• A Couple of 2.6/Xilinx Questions   rakirtley at bellsouth.net
• a problem of kernel-module version mismatch.   Arnd Bergmann
• Making Two ethernet interfaces up in Linux   Rick Moleres
• a problem of kernel-module version mismatch.   Ming Liu
• MPC5200B SPI PSC3 Problem   John Rigby
• MPC5200B SPI PSC3 Problem   John Rigby
• does Gianfar Ethernet Controller Version 1.1 support MARVELL 88E1111?   Andy Fleming
• A Couple of 2.6/Xilinx Questions   Grant Likely
• VFS: Cannot open root device ...   Chris Dumoulin
• does Gianfar Ethernet Controller Version 1.1 support MARVELL 88E1111?   Guo Jaffe
• VFS: Cannot open root device ...   Steve Iribarne (GMail)
• does Gianfar Ethernet Controller Version 1.1 support MARVELL 88E1111?   Andy Fleming
• MPC5200B SPI PSC3 Problem   Trueskew
• help with inittab   Chris Dumoulin
• help with inittab   Steve Iribarne (GMail)
• help with inittab   Wolfgang Denk
• Debugging tools   David H. Lynch Jr.
• Debugging tools   Martin, Tim
• Help -- failed to boot up kernel on PPC40 5   Denny
• does Gianfar Ethernet Controller Version 1.1 support MARVELL 88E1111?   Liu Dave-r63238
• Help -- failed to boot up kernel on PPC40 5   Wolfgang Denk
• a problem of kernel-module version mismatch.   Ming Liu
• a problem of kernel-module version mismatch.   Ming Liu
• a problem of kernel-module version mismatch.   Ming Liu
• a problem of kernel-module version mismatch.   Arnd Bergmann
• does Gianfar Ethernet Controller Version 1.1 support MARVELL 88E1111?   Guo Jaffe
• does Gianfar Ethernet Controller Version 1.1 support MARVELL 88E1111?   Guo Jaffe
• help with inittab   Chris Dumoulin
• help with inittab   Steve Iribarne (GMail)
• help with inittab   Chris Dumoulin
• help with inittab   Scott Coulter
• booting Linux 2.6.15 using a ramdisk and greater than 512MB of DRAM   Scott Coulter
• booting Linux 2.6.15 using a ramdisk and greater than 512MB of DRAM   Xianghua Xiao
• help with inittab   Chris Dumoulin
• help with inittab   Scott Coulter
• help with inittab   Steve Iribarne (GMail)
• help with inittab   Chris Dumoulin
• booting Linux 2.6.15 using a ramdisk and greater than 512MB of DRAM   Wolfgang Denk
• Jumbo ethernet frames on MVME6100   Martin, Tim
• sleep / wake-up   Guennadi Liakhovetski
• sleep / wake-up   Jon Scully
• sleep / wake-up   Guennadi Liakhovetski
• sleep / wake-up   Lee Revell
• sleep / wake-up   Guennadi Liakhovetski
• sleep / wake-up   Lee Revell
• sleep / wake-up   Guennadi Liakhovetski
• Using RS232 Terminal as input device   Guennadi Liakhovetski
• help with inittab   David H. Lynch Jr.
• does Gianfar Ethernet Controller Version 1.1 support MARVELL 88E1111?   Liu Dave-r63238
• does Gianfar Ethernet Controller Version 1.1 support MARVELL 88E1111?   Guo Jaffe
• Using RS232 Terminal as input device   Peter Korsgaard
• CPM_UART should allocate DPRAM for SMCx parameter RAM on MPC82xx   Laurent Pinchart
• Jumbo ethernet frames on MVME6100   Brent Cook
• Linux 2.4 Kernel on Xilinx Virtex4 FX100's PPC   Stephen Telfer
• How to determine IRQ w/ PPC045 (Virtex II Pro)?   Chris Dumoulin
• How to determine IRQ w/ PPC045 (Virtex II Pro)?   Grant Likely
• mv64x60 DMA controller   Phil Nitschke
• help with inittab   Anantharaman Chetan-W16155
• No ttyS device at I/O port 0xfe004500 for console   Alex Zeffertt
• smc2 without hw handshake   Antonio Di Bacco
• No ttyS device at I/O port 0xfe004500 for console   Kumar Gala
• No ttyS device at I/O port 0xfe004500 for console   Joakim Tjernlund
• help with inittab   David H. Lynch Jr.
• MPC5200B SPI PSC3 Problem   Trueskew
• Init dies with unhandled signal 4   David H. Lynch Jr.
• No ttyS device at I/O port 0xfe004500 for console   Joakim Tjernlund
• No ttyS device at I/O port 0xfe004500 for console   Chuck Meade
• No ttyS device at I/O port 0xfe004500 for console   Joakim Tjernlund
• No ttyS device at I/O port 0xfe004500 for console   Chuck Meade
• Suspend-to-RAM?   Guennadi Liakhovetski
• USB flashdrive on Motorola MPC5200 (IceCube) board, linux kernel 2.4.20   Furxhi, Orges
• No ttyS device at I/O port 0xfe004500 for console   Kumar Gala
• No ttyS device at I/O port 0xfe004500 for console   Joakim Tjernlund
• No ttyS device at I/O port 0xfe004500 for console   Joakim Tjernlund
• No ttyS device at I/O port 0xfe004500 for console   Chuck Meade
• regarding xilinx system ace in linux-2.6   rahul
• regarding xilinx system ace in linux-2.6   rahul
• USB flashdrive on Motorola MPC5200 (IceCube) board, linux kernel 2.4.20   Igor Luri
• SMC2 uart problem when using SCC3 as hdlc   antonio.dibacco
• No ttyS device at I/O port 0xfe004500 for console   Alex Zeffertt
• No ttyS device at I/O port 0xfe004500 for console   Alex Zeffertt
• No ttyS device at I/O port 0xfe004500 for console   Alex Zeffertt
• MMC/SD driver using SPI interface on MPC8248   Laurent Pinchart
• No ttyS device at I/O port 0xfe004500 for console   Joakim Tjernlund
• USB flashdrive on Motorola MPC5200 (IceCube) board, linux ker nel 2.4.20   Furxhi, Orges
• USB flashdrive on Motorola MPC5200 (IceCube) board, linux kernel 2.4.20   Igor Luri
• No ttyS device at I/O port 0xfe004500 for console   Chuck Meade
• regarding xilinx system ace in linux-2.6   Jeff Angielski
• USB flashdrive on Motorola MPC5200 (IceCube) board, linux ke rnel 2.4.20   Furxhi, Orges
• USB flashdrive on Motorola MPC5200 (IceCube) board, linux kernel 2.4.20   Igor Luri
• board initialization problem   Om Vadlapatla
• Xilinx SystemACE driver for 2.6   G.Muruganandam
• USB flashdrive on Motorola MPC5200 (IceCube) board, linux ke rnel 2.4.20   Wolfgang Denk
• USB flashdrive on Motorola MPC5200 (IceCube) board, linux ke rnel 2.4.20   Furxhi, Orges
• USB flashdrive on Motorola MPC5200 (IceCube) board, linux ke rnel 2.4.20   Wolfgang Denk
• regarding xilinx system ace in linux-2.6   rahul
• Problem in PCI initialization   Prabhat_Singh
• xilinx ml403 with 2.6 Kernel   "Karl Prüfer"
• Binding FCC interfaces to device names in reverse order   Laurent Pinchart
• xilinx ml403 with 2.6 Kernel   "Karl Prüfer"
• Binding FCC interfaces to device names in reverse order   John Otken
• Binding FCC interfaces to device names in reverse order   Vitaly Bordug
• Linux 2.6 on ml403 board   Filippo Capurso - DAVE srl
• cramfs and crontab timestamp   hubert.loewenguth
• Linuxppc-embedded Digest, Vol 22, Issue 32   MZ Majid Khan-amm117
• cramfs and crontab timestamp   hubert.loewenguth
• Problem in PCI initialization   G.Muruganandam
• MSI support on Linux PCI implementation for Ocotea   Shawn Jin
• Interrupt occurs but UIC0 MSR is still 0   Chris Dumoulin
• Deerfield Internet connection   David H. Lynch Jr.
• MSI support on Linux PCI implementation for Ocotea   Benjamin Herrenschmidt
• MSI support on Linux PCI implementation for Ocotea   Roland Dreier
• MSI support on Linux PCI implementation for Ocotea   Shawn Jin
• Interrupt occurs but UIC0 MSR is still 0   Eugene Surovegin
• Interrupt occurs but UIC0 MSR is still 0   Chris Dumoulin
• Binding FCC interfaces to device names in reverse order   Laurent Pinchart
• MPC5200B SPI PSC3 Problem   Trueskew
• Using bestcomm in an external module (MPC5200B to be exact)   Trueskew
• Using bestcomm in an external module (MPC5200B to be exact)   Frank Bennett
• Using bestcomm in an external module (MPC5200B to be exact)   SalQ
• Linux Audio Xilinx board   Prakash N
• Using bestcomm in an external module (MPC5200B to be exact)   Trueskew
• could linux support to configure the PLB-PCI bridge of PPC440 into adapter mode   陈 云
• Using bestcomm in an external module (MPC5200B to be exact)   Andrey Volkov
• could linux support to configure the PLB-PCI bridge of PPC440 into adapter mode   Matthias Fuchs
• Using bestcomm in an external module (MPC5200B to be exact)   Trueskew
• Using bestcomm in an external module (MPC5200B to be exact)   John Rigby
• Linux on Virtex4   Martin, Tim
• Linux on Virtex4   Grant Likely
• Using bestcomm in an external module (MPC5200B to be exact)   Trueskew
• Linux on Virtex4   Aidan Williams
• Exceptions during PCI initialization at u-boot   Prabhat_Singh
• Gb Ethernet on xilinx gemac IP   Xavier Grave
• Linux on Virtex4   Peter Korsgaard
• Gb Ethernet on xilinx gemac IP   Xavier Grave
• Exceptions during PCI initialization at u-boot   Liu Dave-r63238
• Lite5200 NFS mount issue   Björn Östby
• Gb Ethernet on xilinx gemac IP   Filippo Capurso - DAVE srl
• could linux support to configure the PLB-PCI bridge of PPC440 into adapter mode   陈 云
• Exceptions during PCI initialization at u-boot   Prabhat_Singh
• Exceptions during PCI initialization at u-boot   Liu Dave-r63238
• Lite5200 NFS mount issue   Kimmo Surakka
• Exceptions during PCI initialization at u-boot   Prabhat_Singh
• Lite5200 NFS mount issue   Hans Thielemans
• could linux support to configure the PLB-PCI bridge of PPC440 into adapter mode   Matthias Fuchs
• [PATCH 1/3] PAL: Support of the fixed PHY   Vitaly Bordug
• [PATCH 2/3] FS_ENET: use PAL for mii management   Vitaly Bordug
• [PATCH 3/3] FS_ENET: phydev pointer may be dereferenced without NULL check   Vitaly Bordug
• Linux on Virtex4   Rick Moleres
• regarding xilinx system ace in linux-2.6   John Bonesio
• Linux on Virtex4   Martin, Tim
• xilinx ml403 with 2.6 Kernel   John Bonesio
• Using bestcomm in an external module (MPC5200B to be exact)   Sylvain Munaut
• Using bestcomm in an external module (MPC5200B to be exact)   Sylvain Munaut
• Lite5200 NFS mount issue   Wolfgang Denk
• Lite5200 NFS mount issue   Wolfgang Denk
• Gb Ethernet on xilinx gemac IP   GORAN GVOZDENOVIC
• Exceptions during PCI initialization at u-boot   Liu Dave-r63238
• uboot and ppc405   Zhang Ke
• Linux on Virtex4   Filippo Capurso
• [PATCH 2/3] FS_ENET: use PAL for mii management   Gerhard Jaeger
• porting Linux 2.4 on ML403   Rajanibabu
• [PATCH 2/3] FS_ENET: use PAL for mii management   Vitaly Bordug
• Linux on Virtex4   Grant Likely
• Linux on Virtex4   Aidan Williams
• Adding an external interrupt controller   Laurent Pinchart
• Adding an external interrupt controller   Liu Dave-r63238
• Lite5200 NFS mount issue   Kimmo Surakka
• Adding an external interrupt controller   Laurent Pinchart
• [PATCH 1/3] PAL: Support of the fixed PHY   Vitaly Bordug
• [PATCH 2/3] FS_ENET: use PAL for mii management   Vitaly Bordug
• [PATCH 3/3] FS_ENET: phydev pointer may be dereferenced without NULL check   Vitaly Bordug
• help with processor simulators   kiran Pakala
• Linux on Virtex4   Rick Moleres
• MPC8560 CPM drivers   Scott Coulter
• Linux on Virtex4   Rick Moleres
• [PATCH 1/3] PAL: Support of the fixed PHY   Michael Buesch
• MPC8560 CPM drivers   Vitaly Bordug
• Linux on Virtex4   Filippo Capurso
• [PATCH 1/3] PAL: Support of the fixed PHY   Vitaly Bordug
• entry point of kernel in RAM at 0x0c--linux tree file name   Arun Kumar
• entry point of kernel in RAM at 0x0c--linux tree file name   Laurent Pinchart
• entry point of kernel in RAM at 0x0c--linux tree file name   Laurent Pinchart
• Reg RISC timers in MPC 8260   Jagan
• MPC8548 PCIe / PCI support with BSP MPC8548CDS 02/24/2006   Florian Boelstler
• MPC8548 PCIe / PCI support with BSP MPC8548CDS 02/24/2006   Vitaly Bordug
• MPC8548 PCIe / PCI support with BSP MPC8548CDS 02/24/2006   Florian Boelstler
• Need help ragarding MPC8360 Kernel bootup failure   sudheer
• Need help ragarding MPC8360 Kernel bootup failure   David Hawkins
• zero-copy support on TSEC?   Bizhan Gholikhamseh (bgholikh)
• zero-copy support on TSEC?   Andy Fleming
• Need help on ftp and telnet in my Ramdisk   Denny
• Need help on adding a command to my ramdi sk   Denny
• Need help on adding a command to my ramdi sk   Denny
• Need help on ftp and telnet in my Ramdisk   Denny
• Need help on ftp and telnet in my Ramdisk   Lee Revell
• MPC8548 PCIe / PCI support with BSP MPC8548CDS 02/24/2006   Zhang Wei-r63237
• Need help on ftp and telnet in my Ramdisk   Denny
• Need help ragarding MPC8360 Kernel bootup failure - got solved   sudheer
• MPC8548 PCIe / PCI support with BSP MPC8548CDS 02/24/2006   Florian Boelstler
• MPC8548 PCIe / PCI support with BSP MPC8548CDS 02/24/2006   Zhang Wei-r63237
• Reg RISC timers in MPC 8260   Jagan
• Reg RISC timers in MPC 8260   Vitaly Bordug
• How to search in this mailing-list?   Stephen Cheng
• How to search in this mailing-list?   Steven Blakeslee
• How to search in this mailing-list?   Derycke, Johan
• How to search in this mailing-list?   Florian Boelstler
• MPC8548 PCIe / PCI support with BSP MPC8548CDS 02/24/2006   Florian Boelstler
• Lite5200 MTD partitions in 2.6 build   Rowan, Chad
• Lite5200 MTD partitions in 2.6 build   White
• Can anyone tell me if it is a bug of the ELDK4.0?   Denny
• Using bestcomm in an external module (MPC5200B to be exact)   John Rigby
• MPC8548 PCIe / PCI support with BSP MPC8548CDS 02/24/2006   Zhang Wei-r63237
• how to get individual patches   David H. Lynch Jr.
• Can anyone tell me if it is a bug of the ELDK4.0?   Wolfgang Denk
• how to get individual patches   Alex Zeffertt
• how to get individual patches   Grant Likely
• MPC852T help me for: Oops: kernel access of bad area, sig: 11   SETTE AGOSTINO - technolabs
• no login prompt with ml403 + uartlite-->major numbers?   Robert Zach
• No subject   morelli.gab
• block after "io scheduler noop registered"   morelli.gab
• no login prompt with ml403 + uartlite-->major numbers?   Grant Likely
• how to get individual patches   David H. Lynch Jr.
• how to get individual patches   David H. Lynch Jr.
• CROSS_COMPILE - namespace collision   Lee Revell
• block after "io scheduler noop registered"   Vitaly Bordug
• 2.6 kernel on XUPV2pro / ML300 board!   Ameet Patil
• Xilinx SystemACE driver for 2.6   Ameet Patil
• 2.6 kernel on XUPV2pro / ML300 board!   Rick Moleres
• linux reboots when a process asks for all memory !?!   Antonio Di Bacco
• CROSS_COMPILE - namespace collision   Wolfgang Denk
• no login prompt with ml403 + uartlite-->major numbers?   T Ziomek
• Yosemite board w/ppc440ep NETDEV WATCHDOG: eth0: transmit timed out   Rocky Mussadi
• Xilinx SystemACE driver for 2.6   sudheer
• unresolved symbol on target ... while insmod   srideep.devireddy at wipro.com
• FW: unresolved symbol on target ... while insmod   srideep.devireddy at wipro.com
• 8541 FCC transmit timed out   Stephen Cheng
• Xilinx SystemACE driver for 2.6   Ameet Patil
• Xilinx SystemACE driver for 2.6   Ameet Patil
• entry point of kernel in RAM at 0x0c--linux tree file name   Arun Kumar
• Have problem with Xilinx Uart Lite   Qichen Huang
• Problem with Xilinx Uart Lite   Qichen Huang
• Problem with Xilinx Uart Lite   Andrei Konovalov
• SMC1 serial port blocks   tauanna at tiscali.it
• SMC1 Serial port blocks   tauanna at tiscali.it
• [PATCH] PCI-less kernel for PPC405-based boards   Wojtek Kaniewski
• SMC1 serial port blocks   Martin Krause
• Problem in PCI with MPC5200B   Ram Prasad H L

Last message date: Fri Jun 30 22:51:05 EST 2006
Archived on: Mon Jul 23 18:01:35 EST 2007

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...