Making Two ethernet interfaces up in Linux
Shantanu Nalage
shantanu.nalage at gmail.com
Thu Jun 8 15:16:09 EST 2006
Thanks for the reply.
The driver which we are using for the ethernet is provided by Xilinx.
In the Linux kernel source, it is located in net/xilinx_enet
directory. We are attaching the adapter file for the driver provided
by Xilinx for the ethernet.
When we gave a first try, it showed two ethernet interfaces eth0 and
eth1 as an output of ifconfig command but only eth0 works, when eth1
is disabled. When both interfaces are up, neither interface works.
While even when eth0 is disabled, eth1 interface doesn't work.
With regards,
Shantanu.
On 6/4/06, Antonio Di Bacco <antonio.dibacco at aruba.it> wrote:
> > We are trying to port Linux on Xilinx Board XUPV2Pro which is
> > similar in most aspects to the Xilinx ML300 board. Linux is up and
> > running for the original board i.e. having only one ethrnet interface.
> > Now since we wanted to have the board working as router, we designed a
> > daughter board with two ethernet phy interfaces. The MACs required for
> > that are instantiated in Xilinx ....
>
> You have already the driver for the first MAC, then you should start from that
> modifying the init procedure for example and all the others. Your driver
> should initialize both the MACs and also create two devices calling
> init_etherdev tow times. If you post your driver I can suggest what to
> change. It is not so difficult.
>
> Bye,
> Antonio.
>
>
-------------- next part --------------
/*
* adapter.c
*
* Xilinx Ethernet Adapter component to interface XEmac component to Linux
*
* Author: MontaVista Software, Inc.
* source at mvista.com
*
* 2002 (c) MontaVista, Software, Inc. This file is licensed under the terms
* of the GNU General Public License version 2.1. This program is licensed
* "as is" without any warranty of any kind, whether express or implied.
*/
/*
* This driver is a bit unusual in that it is composed of two logical
* parts where one part is the OS independent code and the other part is
* the OS dependent code. Xilinx provides their drivers split in this
* fashion. This file represents the Linux OS dependent part known as
* the Linux adapter. The other files in this directory are the OS
* independent files as provided by Xilinx with no changes made to them.
* The names exported by those files begin with XEmac_. All functions
* in this file that are called by Linux have names that begin with
* xenet_. The functions in this file that have Handler in their name
* are registered as callbacks with the underlying Xilinx OS independent
* layer. Any other functions are static helper functions.
*/
#include <linux/module.h>
#include <asm/uaccess.h>
#include <linux/init.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/mii.h>
#include <linux/pci.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/atomic.h>
#include <linux/ethtool.h>
#include <xbasic_types.h>
#include "xemac.h"
#include "xemac_i.h"
#include "xipif_v1_23_b.h"
#undef XEM_DFT_SEND_DESC
#define XEM_DFT_SEND_DESC 64
#undef XEM_DFT_RECV_DESC
#define XEM_DFT_RECV_DESC 256
#define DRIVER_NAME "Xilinx Eth MAC driver"
#define DRIVER_VERSION "1.0"
MODULE_AUTHOR("MontaVista Software, Inc. <source at mvista.com>");
MODULE_DESCRIPTION(DRIVER_NAME);
MODULE_LICENSE("GPL");
#define TX_TIMEOUT (60*HZ) /* Transmission timeout is 60 seconds. */
/* On the OPB, the 10/100 EMAC requires data to be aligned to 4 bytes.
* On the PLB, the 10/100 EMAC requires data to be aligned to 8 bytes.
* For simplicity, we always align to 8 bytes.
*/
#define ALIGNMENT 32
/* BUFFER_ALIGN(adr) calculates the number of bytes to the next alignment. */
#define BUFFER_ALIGN(adr) ((ALIGNMENT - ((u32) adr)) % ALIGNMENT)
/* physical to virtual pointer conversion */
#define P_TO_V(InstancePtr, p) \
((p) ? \
((InstancePtr)->VirtPtr + ((u32)(p) - (u32)(InstancePtr)->PhyPtr)) : \
0)
int bh_entry = 0;
/*
* Our private per device data. When a net_device is allocated we will
* ask for enough extra space for this.
*/
struct net_local {
struct list_head rcv;
XBufDescriptor * rcvBdPtr;
int rcvBds;
struct list_head xmit;
XBufDescriptor * xmitBdPtr;
int xmitBds;
struct net_device_stats stats; /* Statistics for this device */
struct net_device *next_dev; /* The next device in dev_list */
struct net_device *dev; /* this device */
struct timer_list phy_timer; /* PHY monitoring timer */
u32 index; /* Which interface is this */
XInterruptHandler Isr; /* Pointer to the XEmac ISR routine */
u8 mii_addr; /* The MII address of the PHY */
/*
* The underlying OS independent code needs space as well. A
* pointer to the following XEmac structure will be passed to
* any XEmac_ function that requires it. However, we treat the
* data as an opaque object in this file (meaning that we never
* reference any of the fields inside of the structure).
*/
XEmac Emac;
void *desc_space;
dma_addr_t desc_space_handle;
int desc_space_size;
u8 *ddrVirtPtr;
u32 ddrOffset;
u32 ddrSize;
struct sk_buff* deferred_skb;
atomic_t availSendBds;
};
/* List of devices we're handling and a lock to give us atomic access. */
static struct net_device *dev_list = NULL;
static spinlock_t dev_lock = SPIN_LOCK_UNLOCKED;
/* for exclusion of all program flows (processes, ISRs and BHs) possible to share data with current one */
static spinlock_t reset_lock = SPIN_LOCK_UNLOCKED;
/* Helper function to determine if a given XEmac error warrants a reset. */
extern inline int
status_requires_reset(XStatus s)
{
return (s == XST_DMA_ERROR || s == XST_FIFO_ERROR ||
s == XST_RESET_ERROR || s == XST_DMA_SG_NO_LIST ||
s == XST_DMA_SG_LIST_EMPTY);
}
/* BH statics */
LIST_HEAD(receivedQueue);
static spinlock_t rcvSpin = SPIN_LOCK_UNLOCKED;
LIST_HEAD(sentQueue);
static spinlock_t xmitSpin = SPIN_LOCK_UNLOCKED;
/* SAATODO: This function will be moved into the Xilinx code. */
/*****************************************************************************/
/**
*
* Lookup the device configuration based on the emac instance. The table
* EmacConfigTable contains the configuration info for each device in the system.
*
* @param Instance is the index of the emac being looked up.
*
* @return
*
* A pointer to the configuration table entry corresponding to the given
* device ID, or NULL if no match is found.
*
* @note
*
* None.
*
******************************************************************************/
XEmac_Config *
XEmac_GetConfig(int Instance)
{
if (Instance < 0 || Instance >= XPAR_XEMAC_NUM_INSTANCES) {
return NULL;
}
return &XEmac_ConfigTable[Instance];
}
/*
* The following are notes regarding the critical sections in this
* driver and how they are protected.
*
* dev_list
* There is a spinlock protecting the device list. It isn't really
* necessary yet because the list is only manipulated at init and
* cleanup, but it's there because it is basically free and if we start
* doing hot add and removal of ethernet devices when the FPGA is
* reprogrammed while the system is up, we'll need to protect the list.
*
* XEmac_Start, XEmac_Stop and XEmac_SetOptions are not thread safe.
* These functions are called from xenet_open(), xenet_close(), reset(),
* and xenet_set_multicast_list(). xenet_open() and xenet_close()
* should be safe because when they do start and stop, they don't have
* interrupts or timers enabled. The other side is that they won't be
* called while a timer or interrupt is being handled.
*
* XEmac_PhyRead and XEmac_PhyWrite are not thread safe.
* These functions are called from get_phy_status(), xenet_ioctl() and
* probe(). probe() is only called from xenet_init() so it is not an
* issue (nothing is really up and running yet). get_phy_status() is
* called from both poll_mii() (a timer bottom half) and xenet_open().
* These shouldn't interfere with each other because xenet_open() is
* what starts the poll_mii() timer. xenet_open() and xenet_ioctl()
* should be safe as well because they will be sequential. That leaves
* the interaction between poll_mii() and xenet_ioctl(). While the
* timer bottom half is executing, a new ioctl won't come in so that is
* taken care of. That leaves the one case of the poll_mii timer
* popping while handling an ioctl. To take care of that case, the
* timer is deleted when the ioctl comes in and then added back in after
* the ioctl is finished.
*/
typedef enum DUPLEX { UNKNOWN_DUPLEX, HALF_DUPLEX, FULL_DUPLEX } DUPLEX;
static void
reset(struct net_device *dev, DUPLEX duplex)
{
struct net_local *lp = (struct net_local *) dev->priv;
u32 Options;
u8 IfgPart1;
u8 IfgPart2;
u8 SendThreshold;
u32 SendWaitBound;
u8 RecvThreshold;
u32 RecvWaitBound;
int dma_works;
/* Shouldn't really be necessary, but shouldn't hurt. */
netif_stop_queue(dev);
/*
* XEmac_Reset puts the device back to the default state. We need
* to save all the settings we don't already know, reset, restore
* the settings, and then restart the emac.
*/
XEmac_GetInterframeGap(&lp->Emac, &IfgPart1, &IfgPart2);
Options = XEmac_GetOptions(&lp->Emac);
switch (duplex) {
case HALF_DUPLEX:
Options &= ~XEM_FDUPLEX_OPTION;
break;
case FULL_DUPLEX:
Options |= XEM_FDUPLEX_OPTION;
break;
case UNKNOWN_DUPLEX:
break;
}
if (XEmac_mIsSgDma(&lp->Emac)) {
/*
* The following four functions will return an error if we are
* not doing scatter-gather DMA. We just checked that so we
* can safely ignore the return values. We cast them to void
* to make that explicit.
*/
dma_works = 1;
(void) XEmac_GetPktThreshold(&lp->Emac, XEM_SEND,
&SendThreshold);
(void) XEmac_GetPktWaitBound(&lp->Emac, XEM_SEND,
&SendWaitBound);
(void) XEmac_GetPktThreshold(&lp->Emac, XEM_RECV,
&RecvThreshold);
(void) XEmac_GetPktWaitBound(&lp->Emac, XEM_RECV,
&RecvWaitBound);
} else
dma_works = 0;
XEmac_Reset(&lp->Emac);
/*
* The following three functions will return an error if the
* EMAC is already started. We just stopped it by calling
* XEmac_Reset() so we can safely ignore the return values.
* We cast them to void to make that explicit.
*/
(void) XEmac_SetMacAddress(&lp->Emac, dev->dev_addr);
(void) XEmac_SetInterframeGap(&lp->Emac, IfgPart1, IfgPart2);
(void) XEmac_SetOptions(&lp->Emac, Options);
if (XEmac_mIsSgDma(&lp->Emac)) {
/*
* The following four functions will return an error if
* we are not doing scatter-gather DMA or if the EMAC is
* already started. We just checked that we are indeed
* doing scatter-gather and we just stopped the EMAC so
* we can safely ignore the return values. We cast them
* to void to make that explicit.
*/
(void) XEmac_SetPktThreshold(&lp->Emac, XEM_SEND,
SendThreshold);
(void) XEmac_SetPktWaitBound(&lp->Emac, XEM_SEND,
SendWaitBound);
(void) XEmac_SetPktThreshold(&lp->Emac, XEM_RECV,
RecvThreshold);
(void) XEmac_SetPktWaitBound(&lp->Emac, XEM_RECV,
RecvWaitBound);
}
/*
* XEmac_Start returns an error when: it is already started, the send
* and receive handlers are not set, or a scatter-gather DMA list is
* missing. None of these can happen at this point, so we cast the
* return to void to make that explicit.
*/
if (dma_works) {
int avail_plus = 0;
while (!(XDmaChannel_IsSgListEmpty(&(lp->Emac.SendChannel)))) { /* list isn't empty, has to be cleared */
XStatus ret;
XBufDescriptor* BdPtr;
if ((ret = XDmaChannel_GetDescriptor (&(lp->Emac.SendChannel), &BdPtr)) != XST_SUCCESS) {
printk (KERN_ERR "SgDma ring structure ERROR %d\n", ret);
break;
}
avail_plus++;
XBufDescriptor_Unlock(BdPtr);
pci_unmap_single(NULL,
(u32) XBufDescriptor_GetSrcAddress(BdPtr),
XBufDescriptor_GetLength(BdPtr), PCI_DMA_TODEVICE);
lp->stats.tx_errors++;
}
atomic_add(avail_plus,&lp->availSendBds);
} else {
if (lp->deferred_skb) {
dev_kfree_skb(lp->deferred_skb);
lp->deferred_skb = NULL;
lp->stats.tx_errors++;
}
}
dev->trans_start = 0xffffffff - TX_TIMEOUT - TX_TIMEOUT; /* to exclude tx timeout */
(void) XEmac_Start(&lp->Emac);
/* We're all ready to go. Start the queue in case it was stopped. */
if (!bh_entry)
netif_wake_queue(dev);
}
static int
get_phy_status(struct net_device *dev, DUPLEX * duplex, int *linkup)
{
struct net_local *lp = (struct net_local *) dev->priv;
u16 reg;
XStatus xs;
xs = XEmac_PhyRead(&lp->Emac, lp->mii_addr, MII_BMCR, ®);
if (xs != XST_SUCCESS) {
printk(KERN_ERR
"%s: Could not read PHY control register; error %d\n",
dev->name, xs);
return -1;
}
if (!(reg & BMCR_ANENABLE)) {
/*
* Auto-negotiation is disabled so the full duplex bit in
* the control register tells us if the PHY is running
* half or full duplex.
*/
*duplex = (reg & BMCR_FULLDPLX) ? FULL_DUPLEX : HALF_DUPLEX;
} else {
/*
* Auto-negotiation is enabled. Figure out what was
* negotiated by looking for the best mode in the union
* of what we and our partner advertise.
*/
u16 advertise, partner, negotiated;
xs = XEmac_PhyRead(&lp->Emac, lp->mii_addr,
MII_ADVERTISE, &advertise);
if (xs != XST_SUCCESS) {
printk(KERN_ERR
"%s: Could not read PHY advertisement; error %d\n",
dev->name, xs);
return -1;
}
xs = XEmac_PhyRead(&lp->Emac, lp->mii_addr, MII_LPA, &partner);
if (xs != XST_SUCCESS) {
printk(KERN_ERR
"%s: Could not read PHY LPA; error %d\n",
dev->name, xs);
return -1;
}
negotiated = advertise & partner & ADVERTISE_ALL;
if (negotiated & ADVERTISE_100FULL)
*duplex = FULL_DUPLEX;
else if (negotiated & ADVERTISE_100HALF)
*duplex = HALF_DUPLEX;
else if (negotiated & ADVERTISE_10FULL)
*duplex = FULL_DUPLEX;
else
*duplex = HALF_DUPLEX;
}
xs = XEmac_PhyRead(&lp->Emac, lp->mii_addr, MII_BMSR, ®);
if (xs != XST_SUCCESS) {
printk(KERN_ERR
"%s: Could not read PHY status register; error %d\n",
dev->name, xs);
return -1;
}
*linkup = (reg & BMSR_LSTATUS) != 0;
return 0;
}
/*
* This routine is used for two purposes. The first is to keep the
* EMAC's duplex setting in sync with the PHY's. The second is to keep
* the system apprised of the state of the link. Note that this driver
* does not configure the PHY. Either the PHY should be configured for
* auto-negotiation or it should be handled by something like mii-tool.
*/
static void
poll_mii(unsigned long data)
{
struct net_device *dev = (struct net_device *) data;
struct net_local *lp = (struct net_local *) dev->priv;
u32 Options;
DUPLEX phy_duplex, mac_duplex;
int phy_carrier, netif_carrier;
unsigned long flags;
/* First, find out what's going on with the PHY. */
if (get_phy_status(dev, &phy_duplex, &phy_carrier)) {
printk(KERN_ERR "%s: Terminating link monitoring.\n",
dev->name);
return;
}
/* Second, figure out if we have the EMAC in half or full duplex. */
Options = XEmac_GetOptions(&lp->Emac);
mac_duplex = (Options & XEM_FDUPLEX_OPTION) ? FULL_DUPLEX : HALF_DUPLEX;
/* Now see if there is a mismatch. */
if (mac_duplex != phy_duplex) {
/*
* Make sure that no interrupts come in that could cause
* reentrancy problems in reset.
*/
spin_lock_irqsave(reset_lock, flags);
reset(dev, phy_duplex); /* the function sets Emac options to match the PHY */
spin_unlock_irqrestore(reset_lock, flags);
if (mac_duplex == FULL_DUPLEX)
printk(KERN_INFO "%s: Duplex has been changed: now %s\n",
dev->name, "HALF_DUPLEX");
else
printk(KERN_INFO "%s: Duplex has been changed: now %s\n",
dev->name, "FULL_DUPLEX");
}
netif_carrier = netif_carrier_ok(dev) != 0;
if (phy_carrier != netif_carrier) {
if (phy_carrier) {
printk(KERN_INFO "%s: Link carrier restored.\n",
dev->name);
netif_carrier_on(dev);
} else {
printk(KERN_INFO "%s: Link carrier lost.\n", dev->name);
netif_carrier_off(dev);
}
}
/* Set up the timer so we'll get called again in 2 seconds. */
lp->phy_timer.expires = jiffies + 2 * HZ;
add_timer(&lp->phy_timer);
}
/*
* This routine is registered with the OS as the function to call when
* the EMAC interrupts. It in turn, calls the Xilinx OS independent
* interrupt function. There are different interrupt functions for FIFO
* and scatter-gather so we just set a pointer (Isr) into our private
* data so we don't have to figure it out here. The Xilinx OS
* independent interrupt function will in turn call any callbacks that
* we have registered for various conditions.
*/
static void
xenet_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
struct net_device *dev = dev_id;
struct net_local *lp = (struct net_local *) dev->priv;
/* Call it. */
(*(lp->Isr)) (&lp->Emac);
}
static int
xenet_open(struct net_device *dev)
{
struct net_local *lp = (struct net_local *) dev->priv;
u32 Options;
DUPLEX phy_duplex, mac_duplex;
int phy_carrier;
/*
* Just to be safe, stop the device first. If the device is already
* stopped, an error will be returned. In this case, we don't really
* care, so cast it to void to make it explicit.
*/
(void) XEmac_Stop(&lp->Emac);
/* Set the MAC address each time opened. */
if (XEmac_SetMacAddress(&lp->Emac, dev->dev_addr) != XST_SUCCESS) {
printk(KERN_ERR "%s: Could not set MAC address.\n", dev->name);
return -EIO;
}
/*
* If the device is not configured for polled mode, connect to the
* interrupt controller and enable interrupts. Currently, there
* isn't any code to set polled mode, so this check is probably
* superfluous.
*/
Options = XEmac_GetOptions(&lp->Emac);
if ((Options & XEM_POLLED_OPTION) == 0) {
int retval;
/* Grab the IRQ */
retval =
request_irq(dev->irq, &xenet_interrupt, 0, dev->name, dev);
if (retval) {
printk(KERN_ERR
"%s: Could not allocate interrupt %d.\n",
dev->name, dev->irq);
return retval;
}
}
/* Set the EMAC's duplex setting based upon what the PHY says. */
if (!get_phy_status(dev, &phy_duplex, &phy_carrier)) {
/* We successfully got the PHY status. */
mac_duplex = ((Options & XEM_FDUPLEX_OPTION)
? FULL_DUPLEX : HALF_DUPLEX);
if (mac_duplex != phy_duplex) {
switch (phy_duplex) {
case HALF_DUPLEX:
Options &= ~XEM_FDUPLEX_OPTION;
break;
case FULL_DUPLEX:
Options |= XEM_FDUPLEX_OPTION;
break;
case UNKNOWN_DUPLEX:
break;
}
/*
* The following function will return an error
* if the EMAC is already started. We know it
* isn't started so we can safely ignore the
* return value. We cast it to void to make
* that explicit.
*/
}
}
Options |= XEM_FLOW_CONTROL_OPTION;
(void) XEmac_SetOptions(&lp->Emac, Options);
INIT_LIST_HEAD(&(lp->rcv));
lp->rcvBds = 0;
INIT_LIST_HEAD(&(lp->xmit));
lp->xmitBds = 0;
if (XEmac_Start(&lp->Emac) != XST_SUCCESS) {
printk(KERN_ERR "%s: Could not start device.\n", dev->name);
free_irq(dev->irq, dev);
return -EBUSY;
}
/* We're ready to go. */
MOD_INC_USE_COUNT;
netif_start_queue(dev);
/* Set up the PHY monitoring timer. */
lp->phy_timer.expires = jiffies + 2 * HZ;
lp->phy_timer.data = (unsigned long) dev;
lp->phy_timer.function = &poll_mii;
add_timer(&lp->phy_timer);
return 0;
}
static int
xenet_close(struct net_device *dev)
{
struct net_local *lp = (struct net_local *) dev->priv;
unsigned long flags;
/* Shut down the PHY monitoring timer. */
del_timer_sync(&lp->phy_timer);
netif_stop_queue(dev);
/*
* If not in polled mode, free the interrupt. Currently, there
* isn't any code to set polled mode, so this check is probably
* superfluous.
*/
if ((XEmac_GetOptions(&lp->Emac) & XEM_POLLED_OPTION) == 0)
free_irq(dev->irq, dev);
spin_lock_irqsave(rcvSpin, flags);
list_del(&(lp->rcv));
spin_unlock_irqrestore(rcvSpin, flags);
spin_lock_irqsave(xmitSpin, flags);
list_del(&(lp->xmit));
spin_unlock_irqrestore(xmitSpin, flags);
if (XEmac_Stop(&lp->Emac) != XST_SUCCESS) {
printk(KERN_ERR "%s: Could not stop device.\n", dev->name);
return -EBUSY;
}
MOD_DEC_USE_COUNT;
return 0;
}
static struct net_device_stats *
xenet_get_stats(struct net_device *dev)
{
struct net_local *lp = (struct net_local *) dev->priv;
return &lp->stats;
}
static int
xenet_FifoSend(struct sk_buff *orig_skb, struct net_device *dev)
{
struct net_local *lp = (struct net_local *) dev->priv;
struct sk_buff *new_skb;
unsigned int len, align;
unsigned long flags;
len = orig_skb->len;
/* PR FIXME: what follows can be removed if the asserts in the Xilinx
* independent drivers change. There is really no need to align the
* buffers in FIFO mode. The story is different for simple DMA.
*/
/*
* The packet FIFO requires the buffers to be 32/64 bit aligned.
* The sk_buff data is not 32/64 bit aligned, so we have to do this
* copy. As you probably well know, this is not optimal.
*/
if (!(new_skb = alloc_skb(len + ALIGNMENT, GFP_ATOMIC))) {
/* We couldn't get another skb. */
dev_kfree_skb(orig_skb);
lp->stats.tx_dropped++;
printk(KERN_ERR "%s: Could not allocate transmit buffer.\n",
dev->name);
netif_wake_queue(dev);
return -EBUSY;
}
/*
* A new skb should have the data word aligned, but this code is
* here just in case that isn't true... Calculate how many
* bytes we should reserve to get the data to start on a word
* boundary. */
align = BUFFER_ALIGN(new_skb->data);
if (align)
skb_reserve(new_skb, align);
/* Copy the data from the original skb to the new one. */
skb_put(new_skb, len);
memcpy(new_skb->data, orig_skb->data, len);
/* Get rid of the original skb. */
dev_kfree_skb(orig_skb);
spin_lock_irqsave(reset_lock, flags);
if (XEmac_FifoSend(&lp->Emac, (u8 *) new_skb->data, len) != XST_SUCCESS) {
netif_stop_queue(dev);
lp->deferred_skb = new_skb;
spin_unlock_irqrestore(reset_lock, flags);
return 0;
}
spin_unlock_irqrestore(reset_lock, flags);
lp->stats.tx_bytes += len;
dev_kfree_skb(new_skb);
dev->trans_start = jiffies;
return 0;
}
/* The callback function for completed frames sent in FIFO mode. */
static void
FifoSendHandler(void *CallbackRef)
{
struct net_device *dev = (struct net_device *) CallbackRef;
struct net_local *lp = (struct net_local *) dev->priv;
if (lp->deferred_skb) {
if (XEmac_FifoSend(&lp->Emac, (u8 *) lp->deferred_skb->data, lp->deferred_skb->len) != XST_SUCCESS) {
return;
} else {
dev_kfree_skb(lp->deferred_skb);
lp->deferred_skb = NULL;
netif_wake_queue(dev);
}
}
lp->stats.tx_packets++;
}
/* The send function for frames sent in DMA mode. */
static int
xenet_SgSend(struct sk_buff *skb, struct net_device *dev)
{
struct net_local *lp = (struct net_local *) dev->priv;
unsigned int len;
XBufDescriptor bd;
int result;
u32 physAddr;
u8 *virtAddr;
unsigned long flags;
len = skb->len;
virtAddr = lp->ddrVirtPtr + lp->ddrOffset;
if (skb->ip_summed == CHECKSUM_NONE)
/*cacheable_*/memcpy(virtAddr, skb->data, len);
else
skb_copy_and_csum_dev(skb, virtAddr);
dev_kfree_skb(skb);
physAddr = (u32) pci_map_single(NULL, virtAddr, len, PCI_DMA_TODEVICE);
/*
* lock the buffer descriptor to prevent lower layers from reusing
* it before the adapter has a chance to deallocate the buffer
* attached to it. The adapter will unlock it in the callback function
* that handles confirmation of transmits
*/
XBufDescriptor_Initialize(&bd);
XBufDescriptor_Lock(&bd);
XBufDescriptor_SetSrcAddress(&bd, physAddr);
XBufDescriptor_SetLength(&bd, len);
XBufDescriptor_SetLast(&bd);
lp->ddrOffset += len + BUFFER_ALIGN(len);
if (lp->ddrOffset + XEM_MAX_FRAME_SIZE > lp->ddrSize)
lp->ddrOffset = 0;
spin_lock_irqsave(reset_lock, flags);
result = XEmac_SgSend(&lp->Emac, &bd, XEM_SGDMA_NODELAY);
if (result != XST_SUCCESS) {
lp->stats.tx_dropped++;
printk(KERN_ERR "%s: ERROR, could not send transmit buffer (%d).\n",
dev->name, result);
/* we should never get here in the first place, but
* for some reason the kernel doesn't like -EBUSY here,
* so just return 0 and let the stack handle dropped packets.
*/
/* return -EBUSY; */
spin_unlock_irqrestore(reset_lock, flags);
return 0;
}
if (atomic_dec_and_test(&lp->availSendBds)) {
netif_stop_queue(dev);
}
dev->trans_start = jiffies;
spin_unlock_irqrestore(reset_lock, flags);
return 0;
}
/* The callback function for completed frames sent in DMA mode. */
static void SgSendHandlerBH (unsigned long p);
static void SgRecvHandlerBH (unsigned long p);
DECLARE_TASKLET (SgSendBH, SgSendHandlerBH, 0);
DECLARE_TASKLET (SgRecvBH, SgRecvHandlerBH, 0);
static void
SgSendHandlerBH (unsigned long p)
{
struct net_device *dev;
struct net_local *lp;
XBufDescriptor * BdPtr;
u32 NumBds;
u32 len;
XBufDescriptor *curbd;
unsigned long flags;
while (1) {
spin_lock_irqsave(xmitSpin,flags);
if (list_empty(&sentQueue)) {
spin_unlock_irqrestore(xmitSpin,flags);
break;
}
lp = list_entry(sentQueue.next, struct net_local, xmit);
list_del_init(&(lp->xmit));
NumBds = lp->xmitBds;
BdPtr = lp->xmitBdPtr;
dev = lp->dev;
atomic_add(NumBds, &lp->availSendBds);
while(NumBds != 0) {
NumBds--;
len = XBufDescriptor_GetLength(BdPtr);
pci_unmap_single(NULL,
(u32) XBufDescriptor_GetSrcAddress(BdPtr),
len, PCI_DMA_TODEVICE);
lp->stats.tx_bytes += len;
lp->stats.tx_packets++;
curbd = BdPtr;
BdPtr = P_TO_V(&lp->Emac.SendChannel,
XBufDescriptor_GetNextPtr(BdPtr));
XBufDescriptor_Unlock(curbd);
}
spin_unlock_irqrestore(xmitSpin,flags);
netif_wake_queue(dev);
}
}
static void
SgSendHandler(void *CallBackRef, XBufDescriptor * BdPtr, u32 NumBds)
{
struct net_device *dev = (struct net_device *) CallBackRef;
struct net_local *lp = (struct net_local *) dev->priv;
struct list_head* cur_lp = NULL;
spin_lock(xmitSpin);
list_for_each (cur_lp, &sentQueue) {
if (cur_lp == &(lp->xmit)) {
lp->xmitBds += NumBds;
break;
}
}
if (cur_lp != &(lp->xmit)) {
lp->xmitBds = NumBds;
lp->xmitBdPtr = BdPtr;
list_add_tail(&lp->xmit,&sentQueue);
bh_entry++;
tasklet_schedule (&SgSendBH);
}
spin_unlock(xmitSpin);
}
static void
SgRecvHandlerBH (unsigned long p)
{
struct net_device *dev;
struct net_local *lp;
XBufDescriptor* BdPtr;
int NumBds;
struct sk_buff *skb, *new_skb;
u32 len, new_skb_vaddr;
dma_addr_t skb_vaddr;
u32 align;
XStatus result;
XBufDescriptor *curbd;
unsigned long flags;
while (1) {
spin_lock_irqsave(rcvSpin,flags);
if (list_empty(&receivedQueue)) {
spin_unlock_irqrestore(rcvSpin,flags);
break;
}
lp = list_entry(receivedQueue.next, struct net_local, rcv);
list_del_init(&(lp->rcv));
NumBds = lp->rcvBds;
BdPtr = lp->rcvBdPtr;
dev = lp->dev;
spin_unlock_irqrestore(rcvSpin,flags);
while (NumBds != 0) {
NumBds--;
/* get ptr to skb */
skb = (struct sk_buff *) XBufDescriptor_GetId(BdPtr);
len = XBufDescriptor_GetLength(BdPtr);
/* we have all the information we need - move on */
curbd = BdPtr;
BdPtr = P_TO_V(&lp->Emac.RecvChannel,
XBufDescriptor_GetNextPtr(curbd));
skb_vaddr = (dma_addr_t)XBufDescriptor_GetDestAddress(curbd);
pci_unmap_single(NULL, skb_vaddr, len, PCI_DMA_FROMDEVICE);
/* replace skb with a new one */
new_skb = alloc_skb(XEM_MAX_FRAME_SIZE + ALIGNMENT, GFP_ATOMIC);
if (new_skb == 0) {
printk("SgRecvHandler: no mem for new_skb\n");
return;
}
/* make sure we're long-word aligned */
align = BUFFER_ALIGN(new_skb->data);
if (align) {
skb_reserve(new_skb, align);
}
new_skb_vaddr = (u32) pci_map_single(NULL, new_skb->data,
XEM_MAX_FRAME_SIZE,
PCI_DMA_FROMDEVICE);
XBufDescriptor_SetDestAddress(curbd, new_skb_vaddr);
XBufDescriptor_SetLength(curbd, XEM_MAX_FRAME_SIZE);
XBufDescriptor_SetId(curbd, new_skb);
XBufDescriptor_Unlock(curbd);
/* give the descriptor back to the driver */
result = XEmac_SgRecv(&lp->Emac, curbd);
if (result != XST_SUCCESS) {
printk("SgRecvHandler: SgRecv unsuccessful\n");
return;
}
/* back to the original skb */
skb->len = len;
skb->dev = dev;
skb->protocol = eth_type_trans(skb, dev);
skb->ip_summed = CHECKSUM_NONE;
lp->stats.rx_packets++;
lp->stats.rx_bytes += len;
netif_rx(skb); /* Send the packet upstream. */
}
}
}
static void
SgRecvHandler(void *CallBackRef, XBufDescriptor * BdPtr, u32 NumBds)
{
struct net_device *dev = (struct net_device *) CallBackRef;
struct net_local *lp = (struct net_local *) dev->priv;
struct list_head* cur_lp = NULL;
spin_lock(rcvSpin);
list_for_each (cur_lp, &receivedQueue) {
if (cur_lp == &(lp->rcv)) {
lp->rcvBds += NumBds;
break;
}
}
if (cur_lp != &(lp->rcv)) {
lp->rcvBds = NumBds;
lp->rcvBdPtr = BdPtr;
list_add_tail(&lp->rcv, &receivedQueue);
tasklet_schedule (&SgRecvBH);
}
spin_unlock(rcvSpin);
}
static void
xenet_tx_timeout(struct net_device *dev)
{
struct net_local *lp = (struct net_local *) dev->priv;
unsigned long flags;
printk("%s: Exceeded transmit timeout of %lu ms.\n",
dev->name, TX_TIMEOUT * 1000UL / HZ);
lp->stats.tx_errors++;
spin_lock_irqsave(reset_lock, flags);
reset(dev, UNKNOWN_DUPLEX);
spin_unlock_irqrestore(reset_lock, flags);
}
/* The callback function for frames received when in FIFO mode. */
static void
FifoRecvHandler(void *CallbackRef)
{
struct net_device *dev = (struct net_device *) CallbackRef;
struct net_local *lp = (struct net_local *) dev->priv;
struct sk_buff *skb;
unsigned int align;
u32 len;
XStatus Result;
/*
* The OS independent Xilinx EMAC code does not provide a
* function to get the length of an incoming packet and a
* separate call to actually get the packet data. It does this
* because they didn't add any code to keep the hardware's
* receive length and data FIFOs in sync. Instead, they require
* that you send a maximal length buffer so that they can read
* the length and data FIFOs in a single chunk of code so that
* they can't get out of sync. So, we need to allocate an skb
* that can hold a maximal sized packet. The OS independent
* code needs to see the data 32/64-bit aligned, so we tack on an
* extra four just in case we need to do an skb_reserve to get
* it that way.
*/
len = XEM_MAX_FRAME_SIZE;
if (!(skb = alloc_skb(len + ALIGNMENT, GFP_ATOMIC))) {
/* Couldn't get memory. */
lp->stats.rx_dropped++;
printk(KERN_ERR "%s: Could not allocate receive buffer.\n",
dev->name);
return;
}
/*
* A new skb should have the data word aligned, but this code is
* here just in case that isn't true... Calculate how many
* bytes we should reserve to get the data to start on a word
* boundary. */
align = BUFFER_ALIGN(skb->data);
if (align)
skb_reserve(skb, align);
Result = XEmac_FifoRecv(&lp->Emac, (u8 *) skb->data, &len);
if (Result != XST_SUCCESS) {
int need_reset = status_requires_reset(Result);
lp->stats.rx_errors++;
dev_kfree_skb(skb);
printk(KERN_ERR "%s: Could not receive buffer, error=%d%s.\n",
dev->name, Result,
need_reset ? ", resetting device." : "");
if (need_reset) {
spin_lock(reset_lock);
reset(dev, UNKNOWN_DUPLEX);
spin_unlock(reset_lock);
}
return;
}
skb_put(skb, len); /* Tell the skb how much data we got. */
skb->dev = dev; /* Fill out required meta-data. */
skb->protocol = eth_type_trans(skb, dev);
skb->ip_summed = CHECKSUM_NONE;
lp->stats.rx_packets++;
lp->stats.rx_bytes += len;
netif_rx(skb); /* Send the packet upstream. */
}
/* The callback function for errors. */
static void
ErrorHandler(void *CallbackRef, XStatus Code)
{
struct net_device *dev = (struct net_device *) CallbackRef;
int need_reset = status_requires_reset(Code);
unsigned long flags;
/* ignore some errors */
if (Code == XST_DMA_ERROR)
return;
printk(KERN_ERR "%s: device error %d%s\n",
dev->name, Code,need_reset ? ", resetting device." : "");
if (need_reset) {
spin_lock_irqsave(reset_lock, flags);
reset(dev, UNKNOWN_DUPLEX);
spin_unlock_irqrestore(reset_lock, flags);
}
}
static int
descriptor_init(struct net_device *dev)
{
struct net_local *lp = (struct net_local *) dev->priv;
int i, recvsize, sendsize;
int dftsize;
u32 *recvpoolptr, *sendpoolptr;
void *recvpoolphy, *sendpoolphy;
/* calc size of descriptor space pool; alloc from non-cached memory */
dftsize = (XEM_DFT_RECV_DESC + XEM_DFT_SEND_DESC) *
sizeof (XBufDescriptor);
lp->desc_space = consistent_alloc(GFP_ATOMIC, dftsize,
&lp->desc_space_handle);
if (lp->desc_space == 0) {
return -1;
}
lp->desc_space_size = dftsize;
lp->ddrSize = XEM_DFT_SEND_DESC * (XEM_MAX_FRAME_SIZE + ALIGNMENT);
lp->ddrOffset = 0;
lp->ddrVirtPtr = kmalloc(lp->ddrSize, GFP_ATOMIC);
if (lp->ddrVirtPtr == 0)
return -1;
atomic_set(&lp->availSendBds, XEM_DFT_SEND_DESC);
/* calc size of send and recv descriptor space */
recvsize = XEM_DFT_RECV_DESC * sizeof (XBufDescriptor);
sendsize = XEM_DFT_SEND_DESC * sizeof (XBufDescriptor);
recvpoolptr = lp->desc_space;
sendpoolptr = (void *) ((u32) lp->desc_space + recvsize);
recvpoolphy = (void *) lp->desc_space_handle;
sendpoolphy = (void *) ((u32) lp->desc_space_handle + recvsize);
/* add ptr to descriptor space to the driver */
XEmac_SetSgRecvSpace(&lp->Emac, recvpoolptr, recvsize, recvpoolphy);
XEmac_SetSgSendSpace(&lp->Emac, sendpoolptr, sendsize, sendpoolphy);
/* allocate skb's and give them to the dma engine */
for (i = 0; i < XEM_DFT_RECV_DESC; i++) {
struct sk_buff *skb;
XBufDescriptor bd;
int result;
u32 skb_vaddr, align;
skb = alloc_skb(XEM_MAX_FRAME_SIZE + ALIGNMENT, GFP_ATOMIC);
if (skb == 0) {
return -1;
}
align = BUFFER_ALIGN(skb->data);
if (align)
skb_reserve(skb, align);
skb_vaddr = (u32) pci_map_single(NULL, skb->data,
XEM_MAX_FRAME_SIZE,
PCI_DMA_FROMDEVICE);
/*
* initialize descriptors and set buffer address
* buffer length gets max frame size
*/
XBufDescriptor_Initialize(&bd);
XBufDescriptor_Lock(&bd);
XBufDescriptor_SetDestAddress(&bd, skb_vaddr);
XBufDescriptor_SetLength(&bd, XEM_MAX_FRAME_SIZE);
XBufDescriptor_SetId(&bd, skb);
/*
* descriptor with attached buffer to the driver and
* let it make it ready for frame reception
*/
result = XEmac_SgRecv(&lp->Emac, &bd);
if (result != XST_SUCCESS) {
return -1;
}
}
return 0;
}
void
free_descriptor_skb (struct net_device *dev)
{
struct net_local *lp = (struct net_local *) dev->priv;
int i;
XBufDescriptor* BdPtr;
struct sk_buff* skb;
BdPtr = (XBufDescriptor*)lp->Emac.RecvChannel.VirtPtr;
for (i=0; i<XEM_DFT_RECV_DESC; i++) {
skb = (struct sk_buff*)XBufDescriptor_GetId(BdPtr);
pci_unmap_single(NULL, virt_to_bus(skb->data), XBufDescriptor_GetLength(BdPtr), PCI_DMA_FROMDEVICE);
dev_kfree_skb(skb);
BdPtr = P_TO_V(&lp->Emac.RecvChannel,XBufDescriptor_GetNextPtr(BdPtr));
}
}
static void
xenet_set_multicast_list(struct net_device *dev)
{
struct net_local *lp = (struct net_local *) dev->priv;
u32 Options;
int ret = 0;
unsigned long flags;
/*
* XEmac_Start, XEmac_Stop and XEmac_SetOptions are supposed to
* be protected by a semaphore. We do have one area in which
* this is a problem.
*
* xenet_set_multicast_list() is called while the link is up and
* interrupts are enabled, so at any point in time we could get
* an error that causes our reset() to be called. reset() calls
* the aforementioned functions, and we need to call them from
* here as well.
*
* The solution is to make sure that we don't get interrupts or
* timers popping while we are in this function.
*/
spin_lock_irqsave(reset_lock, flags);
if ((ret = XEmac_Stop(&lp->Emac)) == XST_SUCCESS) {
Options = XEmac_GetOptions(&lp->Emac);
/* Clear out the bits we may set. */
Options &= ~(XEM_PROMISC_OPTION | XEM_MULTICAST_OPTION);
if (dev->flags & IFF_PROMISC)
Options |= XEM_PROMISC_OPTION;
#if 0
else {
/*
* SAATODO: Xilinx is going to add multicast support to their
* VxWorks adapter and OS independent layer. After that is
* done, this skeleton code should be fleshed out. Note that
* IFF_MULTICAST is being masked out from dev->flags in probe,
* so that will need to be removed to actually do multidrop.
*/
if ((dev->flags & IFF_ALLMULTI)
|| dev->mc_count > MAX_MULTICAST ? ? ?) {
xemac_get_all_multicast ? ? ? ();
Options |= XEM_MULTICAST_OPTION;
} else if (dev->mc_count != 0) {
struct dev_mc_list *mc;
XEmac_MulticastClear(&lp->Emac);
for (mc = dev->mc_list; mc; mc = mc->next)
XEmac_MulticastAdd(&lp->Emac, mc->dmi_addr);
Options |= XEM_MULTICAST_OPTION;
}
}
#endif
/*
* The following function will return an error if the EMAC is already
* started. We know it isn't started so we can safely ignore the
* return value. We cast it to void to make that explicit.
*/
(void) XEmac_SetOptions(&lp->Emac, Options);
/*
* XEmac_Start returns an error when: it is already started, the send
* and receive handlers are not set, or a scatter-gather DMA list is
* missing. None of these can happen at this point, so we cast the
* return to void to make that explicit.
*/
(void) XEmac_Start(&lp->Emac);
}
/* All done, get those interrupts and timers going again. */
spin_unlock_irqrestore(reset_lock, flags);
}
static int
xenet_ethtool_get_settings (struct net_device *dev, struct ethtool_cmd* ecmd)
{
int ret;
struct net_local *lp = (struct net_local *) dev->priv;
u32 mac_options;
u8 threshold;
u16 mii_cmd;
u16 mii_status;
u16 mii_advControl;
XStatus xs;
memset (ecmd, 0, sizeof(struct ethtool_cmd));
mac_options = XEmac_GetOptions (&(lp->Emac));
xs = XEmac_PhyRead(&lp->Emac, lp->mii_addr, MII_BMCR, &mii_cmd);
if (xs != XST_SUCCESS) {
printk(KERN_ERR
"%s: Could not read mii command register; error %d\n",
dev->name, xs);
return -1;
}
xs = XEmac_PhyRead(&lp->Emac, lp->mii_addr, MII_BMSR, &mii_status);
if (xs != XST_SUCCESS) {
printk(KERN_ERR
"%s: Could not read mii status register; error %d\n",
dev->name, xs);
return -1;
}
xs = XEmac_PhyRead(&lp->Emac, lp->mii_addr, MII_ADVERTISE, &mii_advControl);
if (xs != XST_SUCCESS) {
printk(KERN_ERR
"%s: Could not read mii advertisement control register; error %d\n",
dev->name, xs);
return -1;
}
if (mac_options & XEM_FDUPLEX_OPTION)
ecmd->duplex = DUPLEX_FULL;
else
ecmd->duplex = DUPLEX_HALF;
if (mii_status & BMSR_100FULL)
ecmd->supported |= SUPPORTED_100baseT_Full;
if (mii_status & BMSR_100HALF)
ecmd->supported |= SUPPORTED_100baseT_Half;
if (mii_status & BMSR_10FULL)
ecmd->supported |= SUPPORTED_10baseT_Full;
if (mii_status & BMSR_10HALF)
ecmd->supported |= SUPPORTED_10baseT_Half;
if (XEmac_mHasMii(&(lp->Emac)))
ecmd->supported |= SUPPORTED_MII;
else
ecmd->supported &= (~SUPPORTED_MII);
if (mii_status & BMSR_ANEGCAPABLE)
ecmd->supported |= SUPPORTED_Autoneg;
if (mii_status & BMSR_ANEGCOMPLETE) {
ecmd->autoneg = AUTONEG_ENABLE;
ecmd->advertising |= ADVERTISED_Autoneg;
if ((mii_advControl & ADVERTISE_100FULL) || (mii_advControl & ADVERTISE_100HALF))
ecmd->speed = SPEED_100;
else
ecmd->speed = SPEED_10;
} else {
ecmd->autoneg = AUTONEG_DISABLE;
if (mii_cmd & BMCR_SPEED100)
ecmd->speed = SPEED_100;
else
ecmd->speed = SPEED_10;
}
if (mii_advControl & ADVERTISE_10FULL)
ecmd->advertising |= ADVERTISED_10baseT_Full;
if (mii_advControl & ADVERTISE_10HALF)
ecmd->advertising |= ADVERTISED_10baseT_Half;
if (mii_advControl & ADVERTISE_100FULL)
ecmd->advertising |= ADVERTISED_100baseT_Full;
if (mii_advControl & ADVERTISE_100HALF)
ecmd->advertising |= ADVERTISED_100baseT_Half;
ecmd->advertising |= ADVERTISED_MII;
ecmd->port = PORT_MII;
ecmd->phy_address = lp->Emac.PhysAddress;
ecmd->transceiver = XCVR_INTERNAL;
if (XEmac_mIsSgDma(&lp->Emac)) {
if ((ret = XEmac_GetPktThreshold(&lp->Emac, XEM_SEND, &threshold)) == XST_SUCCESS) {
ecmd->maxtxpkt = threshold;
} else
return -EIO;
if ((ret = XEmac_GetPktThreshold(&lp->Emac, XEM_RECV, &threshold)) == XST_SUCCESS) {
ecmd->maxrxpkt = threshold;
} else
return -EIO;
}
return 0;
}
static int
xenet_ethtool_get_coalesce (struct net_device *dev, struct ethtool_coalesce* ec)
{
int ret;
struct net_local *lp = (struct net_local *) dev->priv;
u8 threshold;
memset (ec, 0, sizeof(struct ethtool_coalesce));
if ((ret = XEmac_GetPktThreshold(&lp->Emac, XEM_RECV, &threshold)) != XST_SUCCESS) {
printk(KERN_INFO "XEmac_GetPktThreshold error %d\n", ret);
return -EIO;
}
ec->rx_max_coalesced_frames = threshold;
if ((ret = XEmac_GetPktWaitBound (&lp->Emac, XEM_RECV, &(ec->rx_coalesce_usecs))) != XST_SUCCESS) {
printk (KERN_INFO "XEmac_GetPktWaitBound error %d\n", ret);
return -EIO;
}
if ((ret = XEmac_GetPktThreshold(&lp->Emac, XEM_SEND, &threshold)) != XST_SUCCESS) {
printk (KERN_INFO "XEmac_GetPktThreshold send error %d\n", ret);
return -EIO;
}
ec->tx_max_coalesced_frames = threshold;
if ((ret = XEmac_GetPktWaitBound (&lp->Emac, XEM_SEND, &(ec->tx_coalesce_usecs))) != XST_SUCCESS) {
printk (KERN_INFO "XEmac_GetPktWaitBound send error %d\n", ret);
return -EIO;
}
return 0;
}
static int
xenet_ethtool_set_coalesce (struct net_device *dev, struct ethtool_coalesce* ec)
{
int ret;
struct net_local *lp = (struct net_local *) dev->priv;
unsigned long flags;
spin_lock_irqsave(reset_lock, flags);
if ((ret = XEmac_Stop(&lp->Emac)) != XST_SUCCESS)
return -EIO;
if ((ret = XEmac_SetPktThreshold(&lp->Emac, XEM_RECV, ec->rx_max_coalesced_frames)) != XST_SUCCESS) {
printk (KERN_INFO "XEmac_SetPktThreshold error %d\n", ret);
return -EIO;
}
if ((ret = XEmac_SetPktWaitBound (&lp->Emac, XEM_RECV, ec->rx_coalesce_usecs)) != XST_SUCCESS) {
printk (KERN_INFO "XEmac_SetPktWaitBound error %d\n", ret);
return -EIO;
}
if ((ret = XEmac_SetPktThreshold(&lp->Emac, XEM_SEND, ec->tx_max_coalesced_frames)) != XST_SUCCESS) {
printk (KERN_INFO "XEmac_SetPktThreshold send error %d\n", ret);
return -EIO;
}
if ((ret = XEmac_SetPktWaitBound (&lp->Emac, XEM_SEND, ec->tx_coalesce_usecs)) != XST_SUCCESS) {
printk (KERN_INFO "XEmac_SetPktWaitBound send error %d\n", ret);
return -EIO;
}
if ((ret = XEmac_Start(&lp->Emac)) != XST_SUCCESS)
return -EIO;
spin_unlock_irqrestore(reset_lock, flags);
return 0;
}
static int
xenet_ethtool_get_drvinfo (struct net_device *dev, struct ethtool_drvinfo* ed)
{
memset (ed, 0, sizeof(struct ethtool_drvinfo));
strcpy (ed->driver, DRIVER_NAME);
strcpy (ed->version, DRIVER_VERSION);
return 0;
}
static int
xenet_ethtool_get_ringparam (struct net_device *dev, struct ethtool_ringparam* erp)
{
memset (erp, 0, sizeof(struct ethtool_ringparam));
erp->rx_max_pending = XEM_DFT_RECV_DESC;
erp->tx_max_pending = XEM_DFT_SEND_DESC;
erp->rx_pending = XEM_DFT_RECV_DESC;
erp->tx_pending = XEM_DFT_SEND_DESC;
return 0;
}
#define EMAG_REGS_N 32
struct mac_regsDump {
struct ethtool_regs hd;
u16 data[EMAG_REGS_N];
};
static void
xenet_ethtool_get_regs (struct net_device *dev, struct ethtool_regs* regs, void* ret)
{
struct net_local *lp = (struct net_local *) dev->priv;
struct mac_regsDump* dump = (struct mac_regsDump*)regs;
int i;
XStatus r;
dump->hd.version = 0;
dump->hd.len = EMAG_REGS_N * sizeof(dump->data);
for (i=0; i<EMAG_REGS_N; i++) {
if ((r = XEmac_PhyRead (&(lp->Emac), lp->mii_addr, i, &(dump->data[i]))) != XST_SUCCESS) {
printk (KERN_INFO "PhyRead ERROR %d\n", r);
*(int*)ret = -EIO;
return;
}
}
*(int*)ret = 0;
}
static int
xenet_do_ethtool_ioctl (struct net_device *dev, struct ifreq *rq)
{
struct net_local *lp = (struct net_local *) dev->priv;
struct ethtool_cmd ecmd;
struct ethtool_coalesce eco;
struct ethtool_drvinfo edrv;
struct ethtool_ringparam erp;
struct ethtool_pauseparam epp;
struct mac_regsDump regs;
int ret = -EOPNOTSUPP;
XStatus result;
u32 Options;
u16 mii_reg_sset;
u16 mii_reg_spause;
u16 mii_reg_autoneg;
u32 flags;
if (copy_from_user(&ecmd, rq->ifr_data, sizeof (ecmd.cmd)))
return -EFAULT;
switch (ecmd.cmd) {
case ETHTOOL_GSET:
ret = xenet_ethtool_get_settings(dev, &ecmd);
if (ret >= 0) {
if (copy_to_user(rq->ifr_data, &ecmd, sizeof (ecmd)))
ret = -EFAULT;
}
break;
case ETHTOOL_SSET:
if (copy_from_user(&ecmd, rq->ifr_data, sizeof (struct ethtool_cmd)))
return -EFAULT;
mii_reg_sset = 0;
if (ecmd.speed == SPEED_100)
mii_reg_sset |= BMCR_SPEED100;
if (ecmd.duplex == DUPLEX_FULL)
mii_reg_sset |= BMCR_FULLDPLX;
if (ecmd.autoneg == AUTONEG_ENABLE) {
mii_reg_sset |= (BMCR_ANENABLE | BMCR_ANRESTART);
spin_lock_irqsave(reset_lock, flags);
result = XEmac_PhyWrite(&lp->Emac, lp->mii_addr,
MII_BMCR, mii_reg_sset);
if (result != XST_SUCCESS) {
spin_unlock_irqrestore(reset_lock, flags);
ret = -EIO;
break;
}
result = XEmac_PhyRead(&lp->Emac, lp->mii_addr, MII_ADVERTISE, &mii_reg_sset);
if (result != XST_SUCCESS) {
spin_unlock_irqrestore(reset_lock, flags);
ret = -EIO;
break;
}
if (ecmd.speed == SPEED_100) {
if (ecmd.duplex == DUPLEX_FULL) {
mii_reg_sset |= (ADVERTISE_10FULL | ADVERTISE_100FULL |
ADVERTISE_10HALF | ADVERTISE_100HALF);
} else {
mii_reg_sset |= (ADVERTISE_10HALF | ADVERTISE_100HALF);
mii_reg_sset &= ~(ADVERTISE_10FULL | ADVERTISE_100FULL);
}
} else {
if (ecmd.duplex == DUPLEX_FULL) {
mii_reg_sset |= (ADVERTISE_10FULL | ADVERTISE_10HALF);
mii_reg_sset &= ~(ADVERTISE_100FULL| ADVERTISE_100HALF);
} else {
mii_reg_sset |= (ADVERTISE_10HALF);
mii_reg_sset &= ~(ADVERTISE_100FULL| ADVERTISE_100HALF | ADVERTISE_10FULL);
}
}
result = XEmac_PhyWrite(&lp->Emac, lp->mii_addr, MII_ADVERTISE, mii_reg_sset);
spin_unlock_irqrestore(reset_lock, flags);
if (result != XST_SUCCESS) {
ret = -EIO;
break;
}
} else {
mii_reg_sset &= ~(BMCR_ANENABLE | BMCR_ANRESTART);
if (ecmd.duplex == DUPLEX_FULL) {
mii_reg_sset |= BMCR_FULLDPLX;
} else {
mii_reg_sset &= ~BMCR_FULLDPLX;
}
if (ecmd.speed == SPEED_100) {
mii_reg_sset |= BMCR_SPEED100;
} else {
mii_reg_sset &= ~BMCR_SPEED100;
}
spin_lock_irqsave(reset_lock, flags);
result = XEmac_PhyWrite(&lp->Emac, lp->mii_addr,
MII_BMCR, mii_reg_sset);
spin_unlock_irqrestore(reset_lock, flags);
if (result != XST_SUCCESS) {
ret = -EIO;
break;
}
}
ret = 0;
break;
case ETHTOOL_GPAUSEPARAM:
ret = xenet_ethtool_get_settings(dev, &ecmd);
if (ret < 0) {
break;
}
epp.cmd = ecmd.cmd;
epp.autoneg = ecmd.autoneg;
Options = XEmac_GetOptions(&lp->Emac);
if (Options & XEM_INSERT_PAD_OPTION) {
epp.rx_pause = 1;
epp.tx_pause = 1;
} else {
epp.rx_pause = 0;
epp.tx_pause = 0;
}
if (copy_to_user(rq->ifr_data, &epp, sizeof(struct ethtool_pauseparam)))
ret = -EFAULT;
else
ret = 0;
break;
case ETHTOOL_SPAUSEPARAM:
if (copy_from_user(&epp, rq->ifr_data, sizeof (struct ethtool_pauseparam)))
return -EFAULT;
ret = xenet_ethtool_get_settings(dev, &ecmd);
if (ret < 0) {
break;
}
epp.cmd = ecmd.cmd;
mii_reg_spause = 0;
if (epp.autoneg == AUTONEG_ENABLE) {
mii_reg_spause |= (BMCR_ANENABLE | BMCR_ANRESTART);
} else {
if (ecmd.speed == SPEED_100)
mii_reg_spause |= BMCR_SPEED100;
if (ecmd.duplex == DUPLEX_FULL)
mii_reg_spause |= BMCR_FULLDPLX;
}
spin_lock_irqsave(reset_lock, flags);
result = XEmac_PhyWrite(&lp->Emac, lp->mii_addr,
MII_BMCR, mii_reg_spause);
spin_unlock_irqrestore(reset_lock, flags);
if (result != XST_SUCCESS) {
ret = -EIO;
break;
}
if (epp.rx_pause != epp.tx_pause) {
ret = 0;
break;
} else {
spin_lock_irqsave(reset_lock, flags);
(void)XEmac_Stop(&(lp->Emac));
Options = XEmac_GetOptions(&lp->Emac);
if (epp.rx_pause)
Options |= XEM_INSERT_PAD_OPTION;
else
Options &= ~XEM_INSERT_PAD_OPTION;
(void)XEmac_SetOptions(&lp->Emac,Options);
(void)XEmac_Start(&(lp->Emac));
spin_unlock_irqrestore(reset_lock, flags);
}
ret = 0;
break;
case ETHTOOL_GCOALESCE:
eco.cmd = ecmd.cmd;
ret = xenet_ethtool_get_coalesce(dev, &eco);
if (ret >= 0) {
if (copy_to_user(rq->ifr_data, &eco, sizeof (struct ethtool_coalesce)))
ret = -EFAULT;
}
break;
case ETHTOOL_SCOALESCE:
if (copy_from_user(&eco, rq->ifr_data, sizeof (struct ethtool_coalesce)))
return -EFAULT;
ret = xenet_ethtool_set_coalesce(dev, &eco);
break;
case ETHTOOL_GDRVINFO:
edrv.cmd = edrv.cmd;
ret = xenet_ethtool_get_drvinfo(dev, &edrv);
if (ret >= 0) {
if (copy_to_user(rq->ifr_data, &edrv, sizeof (struct ethtool_drvinfo)))
ret = -EFAULT;
}
break;
case ETHTOOL_GREGS:
regs.hd.cmd = edrv.cmd;
xenet_ethtool_get_regs (dev, &(regs.hd), &ret);
if (ret >= 0) {
if (copy_to_user(rq->ifr_data, ®s, sizeof (struct mac_regsDump)))
ret = -EFAULT;
}
break;
case ETHTOOL_GRINGPARAM:
erp.cmd = edrv.cmd;
ret = xenet_ethtool_get_ringparam (dev, &(erp));
if (ret >= 0) {
if (copy_to_user(rq->ifr_data, &erp, sizeof (struct ethtool_ringparam)))
ret = -EFAULT;
}
break;
case ETHTOOL_NWAY_RST:
epp.cmd = ecmd.cmd;
mii_reg_autoneg = 0;
mii_reg_autoneg |= (BMCR_ANENABLE | BMCR_ANRESTART);
spin_lock_irqsave(reset_lock, flags);
result = XEmac_PhyWrite(&lp->Emac, lp->mii_addr,
MII_BMCR, mii_reg_autoneg);
spin_unlock_irqrestore(reset_lock, flags);
if (result != XST_SUCCESS) {
ret = -EIO;
break;
}
ret = 0;
break;
default:
break;
}
return ret;
}
static int
xenet_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
struct net_local *lp = (struct net_local *) dev->priv;
/* mii_ioctl_data has 4 u16 fields: phy_id, reg_num, val_in & val_out */
struct mii_ioctl_data *data = (struct mii_ioctl_data *) &rq->ifr_data;
struct {
__u8 threshold;
__u32 direction;
} thr_arg;
struct {
__u32 waitbound;
__u32 direction;
} wbnd_arg ;
XStatus ret;
unsigned long flags;
XStatus Result;
switch (cmd) {
case SIOCETHTOOL:
return xenet_do_ethtool_ioctl(dev, rq);
case SIOCGMIIPHY: /* Get address of MII PHY in use. */
case SIOCDEVPRIVATE: /* for binary compat, remove in 2.5 */
data->phy_id = lp->mii_addr;
/* Fall Through */
case SIOCGMIIREG: /* Read MII PHY register. */
case SIOCDEVPRIVATE + 1: /* for binary compat, remove in 2.5 */
if (data->phy_id > 31 || data->reg_num > 31)
return -ENXIO;
/* Stop the PHY timer to prevent reentrancy. */
del_timer_sync(&lp->phy_timer);
spin_lock_irqsave(reset_lock, flags);
Result = XEmac_PhyRead(&lp->Emac, data->phy_id,
data->reg_num, &data->val_out);
/* Start the PHY timer up again. */
spin_unlock_irqrestore(reset_lock, flags);
lp->phy_timer.expires = jiffies + 2 * HZ;
add_timer(&lp->phy_timer);
if (Result != XST_SUCCESS) {
printk(KERN_ERR
"%s: Could not read from PHY, error=%d.\n",
dev->name, Result);
return (Result == XST_EMAC_MII_BUSY) ? -EBUSY : -EIO;
}
return 0;
case SIOCSMIIREG: /* Write MII PHY register. */
case SIOCDEVPRIVATE + 2: /* for binary compat, remove in 2.5 */
if (!capable(CAP_NET_ADMIN))
return -EPERM;
if (data->phy_id > 31 || data->reg_num > 31)
return -ENXIO;
/* Stop the PHY timer to prevent reentrancy. */
del_timer_sync(&lp->phy_timer);
spin_lock_irqsave(reset_lock, flags);
Result = XEmac_PhyWrite(&lp->Emac, data->phy_id,
data->reg_num, data->val_in);
spin_unlock_irqrestore(reset_lock, flags);
/* Start the PHY timer up again. */
lp->phy_timer.expires = jiffies + 2 * HZ;
add_timer(&lp->phy_timer);
if (Result != XST_SUCCESS) {
printk(KERN_ERR
"%s: Could not write to PHY, error=%d.\n",
dev->name, Result);
return (Result == XST_EMAC_MII_BUSY) ? -EBUSY : -EIO;
}
return 0;
case SIOCDEVPRIVATE + 3: /* set THRESHOLD */
if (copy_from_user(&thr_arg, rq->ifr_data, sizeof(thr_arg))) {
return -EFAULT;
}
spin_lock_irqsave(reset_lock, flags);
if ((ret = XEmac_Stop(&lp->Emac)) != XST_SUCCESS) {
return -EIO;
}
if ((ret = XEmac_SetPktThreshold(&lp->Emac, thr_arg.direction, thr_arg.threshold)) != XST_SUCCESS) {
return -EIO;
}
if ((ret = XEmac_Start(&lp->Emac)) != XST_SUCCESS) {
return -EIO;
}
spin_unlock_irqrestore(reset_lock, flags);
return 0;
case SIOCDEVPRIVATE + 4: /* set WAITBOUND */
if (copy_from_user(&wbnd_arg, rq->ifr_data, sizeof(wbnd_arg))) {
return -EFAULT;
}
spin_lock_irqsave(reset_lock, flags);
if ((ret = XEmac_Stop(&lp->Emac)) != XST_SUCCESS) {
return -EIO;
}
if ((ret = XEmac_SetPktWaitBound(&lp->Emac, wbnd_arg.direction, wbnd_arg.waitbound)) != XST_SUCCESS) {
return -EIO;
}
if ((ret = XEmac_Start(&lp->Emac)) != XST_SUCCESS) {
return -EIO;
}
spin_unlock_irqrestore(reset_lock, flags);
return 0;
case SIOCDEVPRIVATE + 5: /* get THRESHOLD */
if (copy_from_user(&thr_arg, rq->ifr_data, sizeof(thr_arg))) {
return -EFAULT;
}
if ((ret = XEmac_GetPktThreshold(&lp->Emac, thr_arg.direction, &(thr_arg.threshold))) != XST_SUCCESS) {
return -EIO;
}
if (copy_to_user(rq->ifr_data, &thr_arg, sizeof(thr_arg))) {
return -EFAULT;
}
return 0;
case SIOCDEVPRIVATE + 6: /* get WAITBOUND */
if (copy_from_user(&wbnd_arg, rq->ifr_data, sizeof(wbnd_arg))) {
return -EFAULT;
}
if ((ret = XEmac_GetPktWaitBound(&lp->Emac, wbnd_arg.direction, &(wbnd_arg.waitbound))) != XST_SUCCESS) {
return -EIO;
}
if (copy_to_user(rq->ifr_data, &wbnd_arg, sizeof(wbnd_arg))) {
return -EFAULT;
}
return 0;
default:
return -EOPNOTSUPP;
}
}
static void
remove_head_dev(void)
{
struct net_local *lp;
struct net_device *dev;
XEmac_Config *cfg;
/* Pull the head off of dev_list. */
spin_lock(&dev_lock);
dev = dev_list;
lp = (struct net_local *) dev->priv;
dev_list = lp->next_dev;
spin_unlock(&dev_lock);
/* Put the physical address back */
cfg = XEmac_GetConfig(lp->index);
iounmap((void *) cfg->BaseAddress);
cfg->BaseAddress = cfg->PhysAddress;
/* Free up the memory. */
if (lp->desc_space)
{
free_descriptor_skb(dev);
consistent_free(lp->desc_space);
}
if (lp->ddrVirtPtr) {
kfree (lp->ddrVirtPtr);
}
unregister_netdev(dev);
kfree(dev);
}
static int __init
probe(int index)
{
static const unsigned long remap_size
= XPAR_EMAC_0_HIGHADDR - XPAR_EMAC_0_BASEADDR + 1;
struct net_device *dev;
struct net_local *lp;
XEmac_Config *cfg;
unsigned int irq;
u32 maddr;
switch (index) {
#if defined(XPAR_INTC_0_EMAC_0_VEC_ID)
case 0:
irq = 31 - XPAR_INTC_0_EMAC_0_VEC_ID;
break;
#if defined(XPAR_INTC_0_EMAC_1_VEC_ID)
case 1:
irq = 31 - XPAR_INTC_0_EMAC_1_VEC_ID;
break;
#if defined(XPAR_INTC_0_EMAC_2_VEC_ID)
case 2:
irq = 31 - XPAR_INTC_0_EMAC_2_VEC_ID;
break;
#if defined(XPAR_INTC_0_EMAC_3_VEC_ID)
#error Edit this file to add more devices.
#endif /* 3 */
#endif /* 2 */
#endif /* 1 */
#endif /* 0 */
default:
return -ENODEV;
}
/* Find the config for our device. */
cfg = XEmac_GetConfig(index);
if (!cfg)
return -ENODEV;
dev = init_etherdev(0, sizeof (struct net_local));
if (!dev) {
printk(KERN_ERR "Could not allocate Xilinx enet device %d.\n",
index);
return -ENOMEM;
}
SET_MODULE_OWNER(dev);
ether_setup(dev);
dev->irq = irq;
/* Initialize our private data. */
lp = (struct net_local *) dev->priv;
memset(lp, 0, sizeof (struct net_local));
lp->index = index;
lp->dev = dev;
/* Make it the head of dev_list. */
spin_lock(&dev_lock);
lp->next_dev = dev_list;
dev_list = dev;
spin_unlock(&dev_lock);
/* Change the addresses to be virtual */
cfg->PhysAddress = cfg->BaseAddress;
cfg->BaseAddress = (u32) ioremap(cfg->PhysAddress, remap_size);
if (XEmac_Initialize(&lp->Emac, cfg->DeviceId) != XST_SUCCESS) {
printk(KERN_ERR "%s: Could not initialize device.\n",
dev->name);
remove_head_dev();
return -ENODEV;
}
memcpy(dev->dev_addr, ((bd_t *) __res)->bi_enetaddr, 6);
if (XEmac_SetMacAddress(&lp->Emac, dev->dev_addr) != XST_SUCCESS) {
/* should not fail right after an initialize */
printk(KERN_ERR "%s: Could not set MAC address.\n", dev->name);
remove_head_dev();
return -EIO;
}
if (XEmac_mIsSgDma(&lp->Emac)) {
int result;
printk(KERN_ERR "%s: using sgDMA mode.\n", dev->name);
XEmac_SetSgRecvHandler(&lp->Emac, dev, SgRecvHandler);
XEmac_SetSgSendHandler(&lp->Emac, dev, SgSendHandler);
dev->hard_start_xmit = xenet_SgSend;
lp->Isr = XEmac_IntrHandlerDma;
result = descriptor_init(dev);
if (result) {
remove_head_dev();
return -EIO;
}
/* set the packet threshold and waitbound*/
XEmac_SetPktThreshold(&lp->Emac, XEM_SEND, 31);
XEmac_SetPktThreshold(&lp->Emac, XEM_RECV, 31);
(void) XEmac_SetPktWaitBound(&lp->Emac, XEM_SEND, 5);
(void) XEmac_SetPktWaitBound(&lp->Emac, XEM_RECV, 5);
/* disable SGEND interrupt */
XEmac_SetOptions(&lp->Emac, XEmac_GetOptions(&lp->Emac) |
XEM_NO_SGEND_INT_OPTION);
} else {
printk(KERN_ERR "%s: using fifo mode.\n", dev->name);
XEmac_SetFifoRecvHandler(&lp->Emac, dev, FifoRecvHandler);
XEmac_SetFifoSendHandler(&lp->Emac, dev, FifoSendHandler);
dev->hard_start_xmit = xenet_FifoSend;
lp->Isr = XEmac_IntrHandlerFifo;
}
XEmac_SetErrorHandler(&lp->Emac, dev, ErrorHandler);
/* Scan to find the PHY. */
lp->mii_addr = 0xFF;
for (maddr = 0; maddr < 31; maddr++) {
XStatus Result;
u16 reg;
Result = XEmac_PhyRead(&lp->Emac, maddr, MII_BMCR, ®);
/*
* XEmac_PhyRead is currently returning XST_SUCCESS even
* when reading from non-existent addresses. Work
* around this by doing a primitive validation on the
* control word we get back.
*/
if (Result == XST_SUCCESS && (reg & BMCR_RESV) == 0) {
lp->mii_addr = maddr;
break;
}
}
if (lp->mii_addr == 0xFF) {
lp->mii_addr = 0;
printk(KERN_WARNING
"%s: No PHY detected. Assuming a PHY at address %d.\n",
dev->name, lp->mii_addr);
}
dev->open = xenet_open;
dev->stop = xenet_close;
dev->get_stats = xenet_get_stats;
dev->flags &= ~IFF_MULTICAST;
dev->set_multicast_list = xenet_set_multicast_list;
dev->do_ioctl = xenet_ioctl;
dev->tx_timeout = xenet_tx_timeout;
dev->watchdog_timeo = TX_TIMEOUT;
dev->features = NETIF_F_SG | NETIF_F_FRAGLIST | NETIF_F_HW_CSUM;
printk(KERN_INFO
"%s: Xilinx EMAC #%d at 0x%08X mapped to 0x%08X, irq=%d\n",
dev->name, index, cfg->PhysAddress, cfg->BaseAddress, dev->irq);
/* print h/w id */
{
u32 id = XIo_In32(cfg->BaseAddress + XIIF_V123B_RESETR_OFFSET);
printk("%s: id %d.%d%c; block id %d, type %d\n",
dev->name, (id >> 28) & 0xf, (id >> 21) & 0x7f,
((id >> 16) & 0x1f) + 'a',
(id >> 16) & 0xff, (id >> 0) & 0xff);
}
return 0;
}
static int __init
xenet_init(void)
{
int index = 0;
while (probe(index++) == 0) ;
/* If we found at least one, report success. */
return (index > 1) ? 0 : -ENODEV;
}
static void __exit
xenet_cleanup(void)
{
while (dev_list)
remove_head_dev();
}
EXPORT_NO_SYMBOLS;
module_init(xenet_init);
module_exit(xenet_cleanup);
More information about the Linuxppc-embedded
mailing list