No ttyS device at I/O port 0xfe004500 for console

[Joakim Tjernlund]

> > 
> > I suspect he got from the same place I did, freescales LTIB 
> dev. env.
> > which has been patched to support 832x. I am having the 
> same problem 
> > as he has, any info on what the problem might be would be great.
> > 
> > Also, if anyone has any info on when these patches will be sent 
> > upstream, I sure would like to hear about it.
> > 
> >  Jocke
> 
> Hi Joakim,
> 
> Same here -- go into arch/ppc/platforms/83xx and edit file 
> mpc83xx_sys.c.
> If you are using the 8323e cpu, then you need to make sure

Yes, got one of those.
 
> that file has code to support the 8323E.  Mine didn't, so I 
> got no platform devices initialized (no serial port, no Eth 
> devs).  I added a block of code to support the 8323E (set 
> mask to 0xffff0000 and "value" to 0x80620000, then the device 
> list for the 8323E).  Use existing code there as a guide, it 
> was not difficult once I figured out that this was the problem.

hmm, you don't have a patch handy?

> 
> If you are using a newer LTIB release than me, perhaps yours is fixed.
> The one I have is from 3/15/06.

Me too, I have requested that freescale release a new LTIB with proper support,
but who knows when the will be.

> 
> Anyway, this works fine for me and addresses the problem of 
> the platform devs not getting initialized.
> 
> Chuck
> 
> 
>