No ttyS device at I/O port 0xfe004500 for console

[Alex Zeffertt]

Kumar Gala wrote:
> 
> On Jun 13, 2006, at 11:48 AM, Alex Zeffertt wrote:
> 
>> Hi list,
>>
>> I'm trying to boot a linux-2.6.11 kernel on a MPC83xx based board.  
>> Through
>> some experimentation I have found I need "console=uart,io,0xfe004500"
>> in the kernel command line in order to get any output over the serial
>> port.
>>
>> Half way through initialisation the kernel appears to swap from its 
>> "early"
>> 8250 serial driver to a "full" 8250 serial driver.  At this point it 
>> prints
>> "No ttyS device at I/O port 0xfe004500 for console" and there is no
>> further output.
>>
>> Does anyone have any idea what I may be doing wrong?
>>
>> BTW, here's the output that I do get.
> 
> Alex, where did you get this 2.6.11 kernel?  The public tree didn't have 
> support for 83xx in 2.6.11.  I'd suggest looking at using something 
> newer like 2.6.16 and see if you have the same issue.
> 
> - k

Hi Kumar, I got it from Freescale's MPC8323EMDS linux BSP.

As far as I am aware this is the only source which has support for this
board.  (Hopefully they will eventually upstream their changes!)

I'll have a look at 2.6.11 and see whether it is feasable to port
the board support to it.

Thanks,

Alex