June 2008 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Sun Jun 1 04:22:20 EST 2008
Ending: Mon Jun 30 23:08:01 EST 2008
Messages: 1646

• [PATCH] Fix DMA nodes in the MPC8610 HPCD device tree   Josh Boyer
• [PATCH 1/4] [POWERPC] 85xx: add board support for the TQM8548 modules   David Gibson
  • [PATCH 1/4] [POWERPC] 85xx: add board support for the TQM8548 modules   Wolfgang Grandegger
    • [PATCH 1/4] [POWERPC] 85xx: add board support for the TQM8548 modules   Kumar Gala
    • [PATCH 1/4] [POWERPC] 85xx: add board support for the TQM8548 modules   Wolfgang Grandegger
    • [PATCH 1/4] [POWERPC] 85xx: add board support for the TQM8548 modules   Kumar Gala
    • [PATCH 1/4] [POWERPC] 85xx: add board support for the TQM8548 modules   David Gibson
    • [PATCH 1/4] [POWERPC] 85xx: add board support for the TQM8548 modules   Wolfgang Grandegger
    • [PATCH 1/4] [POWERPC] 85xx: add board support for the TQM8548 modules   Kumar Gala
    • [PATCH 1/4] [POWERPC] 85xx: add board support for the TQM8548 modules   Wolfgang Grandegger
    • [PATCH 1/4] [POWERPC] 85xx: add board support for the TQM8548 modules   Kumar Gala
    • [PATCH 1/4] [POWERPC] 85xx: add board support for the TQM8548 modules   Wolfgang Grandegger
    • [PATCH 1/4] [POWERPC] 85xx: add board support for the TQM8548 modules   David Gibson
• [PATCH] ftrace: powerpc clean ups   Michael Ellerman
• [PATCH] [POWERPC] Fix incorrect enabling of VMX when building signal or user context   Benjamin Herrenschmidt
• MMIO and gcc re-ordering issue   Russell King
  • MMIO and gcc re-ordering issue   Nick Piggin
    • MMIO and gcc re-ordering issue   Benjamin Herrenschmidt
      • MMIO and gcc re-ordering issue   Nick Piggin
      • MMIO and gcc re-ordering issue   Benjamin Herrenschmidt
      • MMIO and gcc re-ordering issue   Paul Mackerras
      • MMIO and gcc re-ordering issue   Nick Piggin
      • MMIO and gcc re-ordering issue   Linus Torvalds
      • MMIO and gcc re-ordering issue   Trent Piepho
      • MMIO and gcc re-ordering issue   Matthew Wilcox
      • MMIO and gcc re-ordering issue   Trent Piepho
      • MMIO and gcc re-ordering issue   Matthew Wilcox
      • MMIO and gcc re-ordering issue   Trent Piepho
      • MMIO and gcc re-ordering issue   Nick Piggin
      • MMIO and gcc re-ordering issue   Linus Torvalds
      • MMIO and gcc re-ordering issue   Nick Piggin
      • MMIO and gcc re-ordering issue   Linus Torvalds
      • MMIO and gcc re-ordering issue   Alan Cox
      • MMIO and gcc re-ordering issue   Nick Piggin
      • MMIO and gcc re-ordering issue   Jesse Barnes
      • MMIO and gcc re-ordering issue   James Bottomley
      • MMIO and gcc re-ordering issue   Roland Dreier
      • MMIO and gcc re-ordering issue   Jesse Barnes
      • MMIO and gcc re-ordering issue   Nick Piggin
      • MMIO and gcc re-ordering issue   Benjamin Herrenschmidt
      • MMIO and gcc re-ordering issue   Nick Piggin
      • MMIO and gcc re-ordering issue   Jesse Barnes
      • MMIO and gcc re-ordering issue   Nick Piggin
      • MMIO and gcc re-ordering issue   Paul Mackerras
      • MMIO and gcc re-ordering issue   Nick Piggin
      • MMIO and gcc re-ordering issue   Paul Mackerras
      • MMIO and gcc re-ordering issue   Nick Piggin
      • MMIO and gcc re-ordering issue   Nick Piggin
      • MMIO and gcc re-ordering issue   Paul Mackerras
      • MMIO and gcc re-ordering issue   Nick Piggin
      • MMIO and gcc re-ordering issue   Linus Torvalds
      • MMIO and gcc re-ordering issue   Paul Mackerras
      • MMIO and gcc re-ordering issue   Nick Piggin
    • MMIO and gcc re-ordering issue   Trent Piepho
      • MMIO and gcc re-ordering issue   Matthew Wilcox
      • MMIO and gcc re-ordering issue   Trent Piepho
      • MMIO and gcc re-ordering issue   Nick Piggin
      • MMIO and gcc re-ordering issue   Trent Piepho
      • MMIO and gcc re-ordering issue   Benjamin Herrenschmidt
  • MMIO and gcc re-ordering issue   Haavard Skinnemoen
    • MMIO and gcc re-ordering issue   Scott Wood
      • MMIO and gcc re-ordering issue   Haavard Skinnemoen
      • MMIO and gcc re-ordering issue   Linus Torvalds
  • slow MMC over SPI   Andre Schwarz
    • slow MMC over SPI   Fabio Tosetto
      • slow MMC over SPI   André Schwarz
• MMIO and gcc re-ordering issue   Jes Sorensen
• MMIO and gcc re-ordering issue   Jes Sorensen
  • MMIO and gcc re-ordering issue   Jeremy Higdon
  • MMIO and gcc re-ordering issue   Nick Piggin
    • MMIO and gcc re-ordering issue   Jeremy Higdon
      • MMIO and gcc re-ordering issue   Nick Piggin
      • MMIO and gcc re-ordering issue   Jeremy Higdon
    • MMIO and gcc re-ordering issue   Jesse Barnes
      • MMIO and gcc re-ordering issue   Jes Sorensen
      • MMIO and gcc re-ordering issue   Benjamin Herrenschmidt
      • MMIO and gcc re-ordering issue   Matthew Wilcox
      • MMIO and gcc re-ordering issue   Benjamin Herrenschmidt
    • [PATCH] mpc52xx_gpio iomem annotations   Al Viro
    • [PATCH] celleb_scc_pciex endianness misannotations   Al Viro
• MMIO and gcc re-ordering issue   Ingo Molnar
  • MMIO and gcc re-ordering issue   Benjamin Herrenschmidt
• [RFC PATCH 1/2] mmc_spi: export probe and remove functions   Anton Vorontsov
• [PATCH 2/2] talitos: Freescale integrated security engine (SEC) driver   Kim Phillips
  • [PATCH 2/2] talitos: Freescale integrated security engine (SEC) driver   Evgeniy Polyakov
    • [PATCH 2/2] talitos: Freescale integrated security engine (SEC) driver   Kim Phillips
      • [PATCH 2/2] talitos: Freescale integrated security engine (SEC) driver   Evgeniy Polyakov
      • [PATCH 2/2] talitos: Freescale integrated security engine (SEC) driver   Kim Phillips
      • [PATCH 2/2] talitos: Freescale integrated security engine (SEC) driver   Evgeniy Polyakov
• [PATCH] phylib: Don't allow core of phylib to build as a module   Kumar Gala
  • [PATCH] phylib: Don't allow core of phylib to build as a module   Jeff Garzik
    • [PATCH] phylib: Don't allow core of phylib to build as a module   Kumar Gala
    • [PATCH] phylib: Don't allow core of phylib to build as a module   Scott Wood
    • [PATCH] phylib: Don't allow core of phylib to build as a module   Jeff Garzik
    • [PATCH] phylib: Don't allow core of phylib to build as a module   Kumar Gala
    • [PATCH] phylib: Don't allow core of phylib to build as a module   Jeff Garzik
    • [PATCH] phylib: Don't allow core of phylib to build as a module   Kumar Gala
    • [PATCH] phylib: Don't allow core of phylib to build as a module   Kumar Gala
    • [PATCH] phylib: Don't allow core of phylib to build as a module   Andy Fleming
    • [PATCH] phylib: Don't allow core of phylib to build as a module   Jeff Garzik
    • [PATCH] phylib: Don't allow core of phylib to build as a module   Kumar Gala
    • [PATCH] phylib: Don't allow core of phylib to build as a module   Scott Wood
    • [RFC] Make board force selection of PHYLIB   Kumar Gala
    • [RFC] Make board force selection of PHYLIB   Scott Wood
    • [RFC] Make board force selection of PHYLIB   Kumar Gala
    • [RFC] Make board force selection of PHYLIB   Scott Wood
    • [RFC] Make board force selection of PHYLIB   Kumar Gala
    • [RFC] Make board force selection of PHYLIB   Scott Wood
    • [RFC] Make board force selection of PHYLIB   Kumar Gala
    • [RFC] Make board force selection of PHYLIB   Scott Wood
    • [RFC] Make board force selection of PHYLIB   Andy Fleming
    • [RFC] Make board force selection of PHYLIB   Adrian Bunk
    • [RFC] Make board force selection of PHYLIB   Andy Fleming
    • [RFC] Make board force selection of PHYLIB   Kumar Gala
    • [PATCH] phylib: Don't allow core of phylib to build as a module   Grant Likely
    • [PATCH] phylib: Don't allow core of phylib to build as a module   Adrian Bunk
    • [PATCH] phylib: Don't allow core of phylib to build as a module   Kumar Gala
    • [PATCH] [POWERPC] 85xx: MPC85xx MDS - Unconditionally select PHYLIB for board fixups   Kumar Gala
    • [PATCH] [POWERPC] 85xx: MPC85xx MDS - Unconditionally select PHYLIB for board fixups   Jeff Garzik
• Generating a FDT from an MHS file   Jacob Holladay Poteet
  • Generating a FDT from an MHS file   Stephen Neuendorffer
    • [PATCH] [POWERPC] 85xx: Add next-level-cache property   Kumar Gala
    • [PATCH] [POWERPC] Cleanup mpic nodes in .dts   Kumar Gala
    • [PATCH] [POWERPC] Cleanup mpic nodes in .dts   Segher Boessenkool
    • [PATCH] [POWERPC] Cleanup mpic nodes in .dts   Kumar Gala
• [PATCH 0/8 v4] mpc83xx_wdt rework, support for mpc8610 and mpc8xx   Anton Vorontsov
  • [PATCH 1/8] [WATCHDOG] mpc83xx_wdt: fix checkpatch issues   Anton Vorontsov
    • [PATCH 1/8] [WATCHDOG] mpc83xx_wdt: fix checkpatch issues   Alan Cox
      • [PATCH 1/8] [WATCHDOG] mpc83xx_wdt: fix checkpatch issues   Anton Vorontsov
  • [PATCH 2/8] [WATCHDOG] mpc83xx_wdt: convert to the OF platform driver   Anton Vorontsov
  • [PATCH 3/8] [WATCHDOG] mpc83xx_wdt: add support for MPC86xx CPUs   Anton Vorontsov
  • [PATCH 4/8] [WATCHDOG] mpc83xx_wdt: rename to mpc8xxx_wdt   Anton Vorontsov
  • [PATCH 5/8] [WATCHDOG] mpc8xxx_wdt: various renames, mostly s/mpc83xx/mpc8xxx/g   Anton Vorontsov
  • [PATCH 6/8] [WATCHDOG] mpc8xxx_wdt: add support for MPC8xx watchdogs   Anton Vorontsov
  • [PATCH 7/8] [POWERPC] fsl_soc: remove mpc83xx_wdt code   Anton Vorontsov
  • [PATCH 8/8] [POWERPC] 86xx: mpc8610_hpcd: add watchdog node   Anton Vorontsov
    • [PATCH 0/8 v4] mpc83xx_wdt rework, support for mpc8610 and mpc8xx   Andrew Morton
      • [PATCH 0/8 v4] mpc83xx_wdt rework, support for mpc8610 and mpc8xx   Anton Vorontsov
      • [PATCH 0/8 v4] mpc83xx_wdt rework, support for mpc8610 and mpc8xx   Andrew Morton
      • [PATCH 0/8 v4] mpc83xx_wdt rework, support for mpc8610 and mpc8xx   Paul Mackerras
      • [PATCH 0/8 v4] mpc83xx_wdt rework, support for mpc8610 and mpc8xx   Andrew Morton
      • [PATCH 0/8 v4] mpc83xx_wdt rework, support for mpc8610 and mpc8xx   Randy Dunlap
      • [PATCH 0/8 v4] mpc83xx_wdt rework, support for mpc8610 and mpc8xx   Anton Vorontsov
      • [PATCH -mm] watchdog: mpc8xxx_wdt: fix build   Anton Vorontsov
• [RFC PATCH] booting-without-of: add FHCI USB, FSL MCU, FSL UPM and GPIO LEDs bindings   Anton Vorontsov
  • [RFC PATCH] booting-without-of: add FHCI USB, FSL MCU, FSL UPM and GPIO LEDs bindings   Wolfgang Grandegger
    • [RFC PATCH] booting-without-of: add FHCI USB, FSL MCU, FSL UPM and GPIO LEDs bindings   Anton Vorontsov
      • [PATCH v2] [POWERPC] Cleanup mpic nodes in .dts   Kumar Gala
      • [PATCH v2] [POWERPC] 85xx: Add next-level-cache property   Kumar Gala
      • [PATCH] [POWERPC] 85xx: Add next-level-cache property   Kumar Gala
      • [PATCH] [POWERPC] 85xx: Add next-level-cache property   Segher Boessenkool
      • [PATCH] [POWERPC] 85xx: Add next-level-cache property   Nathan Lynch
      • [PATCH] [POWERPC] 85xx: Add next-level-cache property   Kumar Gala
      • [PATCH][POWERPC] Update fsl_soc to use cell-index property of I2C nodes   Timur Tabi
      • [PATCH][POWERPC] Update fsl_soc to use cell-index property of I2C nodes   Kumar Gala
    • [PATCH] Add support for binary includes.   Jon Loeliger
    • dtc: Add a testcase for 'reg' or 'ranges' in /   Jon Loeliger
• [rtc-linux] state of GEN_RTC vs rtc subsystem   Geoff Levand
  • [rtc-linux] Re: state of GEN_RTC vs rtc subsystem   David Woodhouse
• [PATCH] [POWERPC] use dev_set_name in pci_64.c   Stephen Rothwell
  • How to link a .o with all modules   Kumar Gala
• [RFC] Kprobes for book-e   Kumar Gala
  • [RFC] Kprobes for book-e   Ananth N Mavinakayanahalli
    • [RFC] Kprobes for book-e   Kumar Gala
• problems with porting linux 2.6 kernel to xupv2p   pedrol
  • problems with porting linux 2.6 kernel to xupv2p   Guillaume Dargaud
• [PATCH 2/3] [2.6.26] ehea: Add dependency to Kconfig   Hannes Hering
  • [PATCH 2/3] [2.6.26] ehea: Add dependency to Kconfig   Nathan Lynch
• [RFC] Kprobes for book-e   Sulibhavi, Madhvesh
  • [RFC] Kprobes for book-e   Josh Boyer
    • [RFC] Kprobes for book-e   Kumar Gala
• [PATCH 3/3] mmc: change .get_ro() callback semantics   Marc Pignat
  • [PATCH 3/3] mmc: change .get_ro() callback semantics   Anton Vorontsov
    • [PATCH 3/3] mmc: change .get_ro() callback semantics   Marc Pignat
      • [PATCH] mmc: toughen get_ro() and get_cd() return values   Anton Vorontsov
• [PATCH 1/2] [POWERPC] rtc_cmos_setup: assign interrupts only if there is i8259 PIC   Anton Vorontsov
• [PATCH 1/2] [POWERPC] rtc_cmos_setup: assign interrupts only if there is i8259 PIC   Anton Vorontsov
• [RFC 0/3]: hvc_console rework for platform without hard irqs   Christian Borntraeger
  • [RFC 1/3] hvc_console: rework setup to replace irq functions with callbacks   Christian Borntraeger
    • [RFC 1/3] hvc_console: rework setup to replace irq functions with callbacks   Rusty Russell
      • [RFC 1/3] hvc_console: rework setup to replace irq functions with callbacks   Christian Borntraeger
  • [RFC 2/3] virtio_console: use virtqueue notification for hvc_console   Christian Borntraeger
    • [RFC 2/3] virtio_console: use virtqueue notification for hvc_console   Arnd Bergmann
  • [RFC 3/3] s390: use virtio_console for KVM on s390   Christian Borntraeger
  • [RFC 1/3] hvc_console: rework setup to replace irq functions with callbacks (not word wrapped)   Christian Borntraeger
    • [RFC 1/3] hvc_console: rework setup to replace irq functions with callbacks (not word wrapped)   Arnd Bergmann
      • [RFC 1/3] hvc_console: rework setup to replace irq functions with callbacks (not word wrapped)   Christian Borntraeger
    • [RFC 1/3] hvc_console: rework setup to replace irq functions with callbacks (not word wrapped)   Benjamin Herrenschmidt
  • [RFC 1/3 v2] hvc_console: rework setup to replace irq functions with callbacks   Christian Borntraeger
    • [RFC 1/3 v2] hvc_console: rework setup to replace irq functions with callbacks   Rusty Russell
  • [RFC 2/3 v2] virtio_console: use virtqueue notification for hvc_console   Christian Borntraeger
  • [RFC 3/3 v2] s390: use virtio_console for KVM on s390   Christian Borntraeger
    • [RFC 3/3 v2] s390: use virtio_console for KVM on s390   Rusty Russell
• [RFC] Kprobes for book-e   Sulibhavi, Madhvesh
  • [RFC] Kprobes for book-e   Josh Boyer
    • [RFC] Kprobes for book-e   Kumar Gala
• [RFC] Kprobes for book-e   Sulibhavi, Madhvesh
• uboot version for 8572CDS   Morrison, Tom
  • uboot version for 8572CDS   Kumar Gala
• [RFC] Kprobes for book-e   Sulibhavi, Madhvesh
  • [RFC] Kprobes for book-e   Josh Boyer
• [RFC] Kprobes for book-e   Sulibhavi, Madhvesh
  • Invalidate_dcache_range causes crash in non-cacheable area   Franca, Jose (NSN - PT/Portugal - MiniMD)
• cntlzw   Kevin Diggs
  • cntlzw   Scott Wood
    • cntlzw   Matt Sealey
• [PATCH] i2c: Add MAINTAINER entry for i2c-cpm.   Jochen Friedrich
  • [PATCH] i2c: Add MAINTAINER entry for i2c-cpm.   Jean Delvare
  • [PATCH 2/3] [2.6.26] ehea: Add dependency to Kconfig   Badari Pulavarty
    • [PATCH 2/3] [2.6.26] ehea: Add dependency to Kconfig   Jeff Garzik
      • [PATCH 1/2] make walk_memory_resource available with MEMORY_HOTPLUG=n   Nathan Lynch
      • [PATCH 1/2] make walk_memory_resource available with MEMORY_HOTPLUG=n   Badari Pulavarty
      • [PATCH 1/2] make walk_memory_resource available with MEMORY_HOTPLUG=n   Nathan Lynch
      • [PATCH 1/2] make walk_memory_resource available with MEMORY_HOTPLUG=n   Paul Mackerras
      • [PATCH 2/2] ehea: remove dependency on MEMORY_HOTPLUG   Nathan Lynch
      • [PATCH 2/2] ehea: remove dependency on MEMORY_HOTPLUG   Jeff Garzik
      • [PATCH 2/2] ehea: remove dependency on MEMORY_HOTPLUG   Yasunori Goto
  • [PATCH] [POWERPC] Xilinx: add compatibility for 'simple-bus'.   Stephen Neuendorffer
    • [PATCH] [POWERPC] Xilinx: add compatibility for 'simple-bus'.   Grant Likely
      • [PATCH] [POWERPC] Xilinx: add compatibility for 'simple-bus'.   Stephen Neuendorffer
      • [PATCH] [POWERPC] Xilinx: add compatibility for 'simple-bus'.   Grant Likely
      • [PATCH] [POWERPC] Xilinx: add compatibility for 'simple-bus'.   Stephen Neuendorffer
• 750GX cpu freq support   Kevin Diggs
  • [RFC] POWERPC: Merge 32 and 64-bit dma code   Becky Bruce
  • [RFC] POWERPC: Merge 32 and 64-bit dma code   Becky Bruce
• [PATCH] Add support for binary includes.   David Gibson
  • [PATCH] Add support for binary includes.   Bartlomiej Sieka
  • [PATCH] Add support for binary includes.   Jon Loeliger
    • [PATCH] Add support for binary includes.   Josh Boyer
    • dtc: Add support for binary includes.   David Gibson
      • dtc: Add support for binary includes.   Scott Wood
      • dtc: Add support for binary includes.   David Gibson
      • dtc: Add support for binary includes.   Jon Loeliger
      • dtc: Add support for binary includes.   David Gibson
• [PATCH] [NAND] driver extension to support NAND on TQM85xx modules   Wolfgang Grandegger
  • [PATCH] [NAND] driver extension to support NAND on TQM85xx modules   Anton Vorontsov
• [PATCH] rtc-ds1374: Rename device to just "ds1374"   Alessandro Zummo
  • [PATCH] rtc-ds1374: Rename device to just "ds1374"   Kumar Gala
  • [PATCH] rtc-ds1374: Rename device to just "ds1374"   Alessandro Zummo
• "cell-index" vs. "index" vs. no index in I2C device nodes   Stefan Roese
  • "cell-index" vs. "index" vs. no index in I2C device nodes   Timur Tabi
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Scott Wood
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Josh Boyer
    • "cell-index" vs. "index" vs. no index in I2C device nodes   David Gibson
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Segher Boessenkool
    • "cell-index" vs. "index" vs. no index in I2C device nodes   David Gibson
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Segher Boessenkool
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Grant Likely
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Sean MacLennan
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Sean MacLennan
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Josh Boyer
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Sean MacLennan
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Stefan Roese
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Jean Delvare
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Stefan Roese
    • "cell-index" vs. "index" vs. no index in I2C device nodes   David Gibson
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Josh Boyer
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Timur Tabi
    • "cell-index" vs. "index" vs. no index in I2C device nodes   David Gibson
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Benjamin Herrenschmidt
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Benjamin Herrenschmidt
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Jean Delvare
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Grant Likely
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Benjamin Herrenschmidt
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Timur Tabi
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Jochen Friedrich
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Timur Tabi
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Grant Likely
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Timur Tabi
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Jochen Friedrich
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Grant Likely
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Timur Tabi
    • "cell-index" vs. "index" vs. no index in I2C device nodes   David Gibson
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Grant Likely
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Josh Boyer
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Segher Boessenkool
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Sean MacLennan
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Josh Boyer
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Timur Tabi
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Grant Likely
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Timur Tabi
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Segher Boessenkool
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Timur Tabi
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Scott Wood
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Timur Tabi
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Scott Wood
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Grant Likely
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Timur Tabi
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Josh Boyer
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Timur Tabi
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Grant Likely
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Josh Boyer
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Timur Tabi
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Josh Boyer
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Grant Likely
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Josh Boyer
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Grant Likely
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Josh Boyer
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Timur Tabi
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Segher Boessenkool
    • "cell-index" vs. "index" vs. no index in I2C device nodes   David Gibson
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Timur Tabi
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Stefan Roese
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Sean MacLennan
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Benjamin Herrenschmidt
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Timur Tabi
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Jochen Friedrich
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Segher Boessenkool
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Jochen Friedrich
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Grant Likely
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Benjamin Herrenschmidt
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Benjamin Herrenschmidt
    • "cell-index" vs. "index" vs. no index in I2C device nodes   Benjamin Herrenschmidt
    • [PATCH] i2c-ibm_iic: Remove deprecated OCP style part of the driver   Stefan Roese
    • [PATCH] i2c-ibm_iic: Remove deprecated OCP style part of the driver   Jean Delvare
    • [PATCH] i2c-ibm_iic: Remove deprecated OCP style part of the driver   Stefan Roese
• [PATCH] irda: driver for Freescale FIRI controller   Anton Vorontsov
  • [PATCH] irda: driver for Freescale FIRI controller   Samuel Ortiz
• [PATCH 1/2] [POWERPC] sysdev: implement support for MPC8349-compatible SOC GPIOs   Anton Vorontsov
• [PATCH 2/2] [POWERPC] 86xx: mpc8610_hpcd: add support for IrDA   Anton Vorontsov
• [PATCH v2] [POWERPC] rtc_cmos_setup: assign interrupts only if there is i8259 PIC   Anton Vorontsov
• inline assembly   Kevin Diggs
  • inline assembly   Scott Wood
    • inline assembly   David Howells
      • inline assembly   Scott Wood
• [PATCH] Fix definitions for dbcr0, dbcr1, & dbcr2 register for bookE processors   Jerone Young
  • [PATCH] Fix definitions for dbcr0, dbcr1, & dbcr2 register for bookE processors   Josh Boyer
    • [PATCH] Fix definitions for dbcr0, dbcr1, & dbcr2 register for bookE processors   Jerone Young
• Please pull from 'powerpc-next' branch   Kumar Gala
  • Please pull from 'powerpc-next' branch   Anton Vorontsov
    • Please pull from 'powerpc-next' branch   Kumar Gala
• [PATCH 2/6] Allow create_branch() to return errors   Michael Ellerman
• [PATCH 2/2 v2] talitos: Freescale integrated security engine (SEC) driver   Herbert Xu
  • [PATCH 2/2 v2] talitos: Freescale integrated security engine (SEC) driver   Kim Phillips
    • [PATCH 2/2 v2] talitos: Freescale integrated security engine (SEC) driver   Herbert Xu
• 10th Real-Time Linux Workshop - Call for Papers   Wang, Baojun
  • [PATCH] i2c-ibm_iic: Enable driver for all PPC4xx variants in arch/powerpc   Stefan Roese
  • [PATCH] i2c-ibm_iic: Enable driver for all PPC4xx variants in arch/powerpc   Josh Boyer
  • [PATCH] i2c-ibm_iic: Enable driver for all PPC4xx variants in arch/powerpc   Jean Delvare
  • [PATCH] i2c-ibm_iic: Enable driver for all PPC4xx variants in arch/powerpc   Stefan Roese
• [PATCH v2] [NAND] driver extension to support NAND on TQM85xx modules   Wolfgang Grandegger
  • [PATCH v2] [NAND] driver extension to support NAND on TQM85xx modules   David Woodhouse
    • [PATCH v2] [NAND] driver extension to support NAND on TQM85xx modules   Anton Vorontsov
      • [PATCH v2] [NAND] driver extension to support NAND on TQM85xx modules   Wolfgang Grandegger
      • [PATCH v2] [NAND] driver extension to support NAND on TQM85xx modules   Segher Boessenkool
      • [PATCH v2] [NAND] driver extension to support NAND on TQM85xx modules   Wolfgang Grandegger
    • [PATCH v2] [NAND] driver extension to support NAND on TQM85xx modules   Wolfgang Grandegger
    • [PATCH v2] [NAND] driver extension to support NAND on TQM85xx modules   Wolfgang Grandegger
• [PATCH v2 0/4] [POWERPC] 85xx: Add suport for TQM8548 and some TQM85xx fixes   Wolfgang Grandegger
• [PATCH v2 1/4] [POWERPC] 85xx: add board support for the TQM8548 modules   Wolfgang Grandegger
  • [PATCH v2 1/4] [POWERPC] 85xx: add board support for the TQM8548 modules   Kumar Gala
  • [PATCH v2 1/4] [POWERPC] 85xx: add board support for the TQM8548 modules   Wolfgang Grandegger
  • [PATCH v2 1/4] [POWERPC] 85xx: add board support for the TQM8548 modules   David Gibson
  • [PATCH v2 1/4] [POWERPC] 85xx: add board support for the TQM8548 modules   Wolfgang Grandegger
  • [PATCH v2 1/4] [POWERPC] 85xx: add board support for the TQM8548 modules   Kumar Gala
  • [PATCH v2 1/4] [POWERPC] 85xx: add board support for the TQM8548 modules   Wolfgang Denk
  • Default flats for running dtc from kernel build   Kumar Gala
  • Default flats for running dtc from kernel build   Jon Loeliger
  • Default flats for running dtc from kernel build   Kumar Gala
  • Default flats for running dtc from kernel build   Grant Likely
  • Default flats for running dtc from kernel build   Jon Loeliger
  • Default flats for running dtc from kernel build   Segher Boessenkool
  • Default flats for running dtc from kernel build   Peter Czanik
  • Default flats for running dtc from kernel build   Jerry Van Baren
• [PATCH v2 2/4] [POWERPC] 85xx: support for the TQM8548 module using the big Flash   Wolfgang Grandegger
  • [PATCH v2 2/4] [POWERPC] 85xx: support for the TQM8548 module using the big Flash   Kumar Gala
• [PATCH v2 3/4] [POWERPC] 85xx: add local bus nodes for Flash and CAN to tqm8560.dts   Wolfgang Grandegger
• [PATCH v2 4/4] [POWERPC] 85xx: correct vendor prefix in DTS files for TQM85xx modules   Wolfgang Grandegger
  • [PATCH v2 4/4] [POWERPC] 85xx: correct vendor prefix in DTS files for TQM85xx modules   Kumar Gala
• Linux 2.6.26-rc5   Olaf Hering
  • Linux 2.6.26-rc5 (G5 SATA broken)   Hugh Dickins
    • Linux 2.6.26-rc5 (G5 SATA broken)   Alan Cox
      • [PATCH] libata: fix G5 SATA broken on -rc5   Hugh Dickins
      • [PATCH] libata: fix G5 SATA broken on -rc5   Olaf Hering
    • Linux 2.6.26-rc5 (G5 SATA broken)   Benjamin Herrenschmidt
  • Linux 2.6.26-rc5   Alan Cox
  • [PATCH v2] MTD support for the AMCC Taishan   Imre Kaloz
    • [PATCH v2] MTD support for the AMCC Taishan   Josh Boyer
• [PATCH] PowerPC 44x: small warp-nand fix   Valentine Barshak
  • [PATCH] PowerPC 44x: small warp-nand fix   Stefan Roese
    • [PATCH] PowerPC 44x: small warp-nand fix   Sean MacLennan
      • [PATCH] [POWERPC] 4xx: PCIe driver now detects if a port is disabled via the dev-tree   Stefan Roese
      • [PATCH] [POWERPC] 4xx: PCIe driver now detects if a port is disabled via the dev-tree   Benjamin Herrenschmidt
• 4xx support in arch/ppc is going away Real Soon Now   Josh Boyer
  • 4xx support in arch/ppc is going away Real Soon Now   Grant Likely
    • 4xx support in arch/ppc is going away Real Soon Now   Josh Boyer
      • 4xx support in arch/ppc is going away Real Soon Now   Stephen Neuendorffer
      • arch/ppc is going away Real Soon Now   Arnd Bergmann
      • arch/ppc is going away Real Soon Now   Grant Likely
      • arch/ppc is going away Real Soon Now   Olof Johansson
      • arch/ppc is going away Real Soon Now   Scott Wood
      • arch/ppc is going away Real Soon Now   Becky Bruce
      • arch/ppc is going away Real Soon Now   Wolfgang Denk
      • arch/ppc is going away Real Soon Now   Jon Loeliger
      • arch/ppc is going away Real Soon Now   Sean MacLennan
      • arch/ppc is going away Real Soon Now   Peter Korsgaard
      • arch/ppc is going away Real Soon Now   Stefan Roese
      • arch/ppc is going away Real Soon Now   Jochen Friedrich
      • arch/ppc is going away Real Soon Now   Adrian Bunk
      • arch/ppc is going away Real Soon Now   Segher Boessenkool
      • arch/ppc is going away Real Soon Now   Benjamin Herrenschmidt
      • arch/ppc is going away Real Soon Now   Kumar Gala
      • arch/ppc is going away Real Soon Now   Stefan Roese
      • 4xx support in arch/ppc is going away Real Soon Now   Kumar Gala
      • 4xx support in arch/ppc is going away Real Soon Now   Josh Boyer
    • 4xx support in arch/ppc is going away Real Soon Now   Adrian Bunk
      • 4xx support in arch/ppc is going away Real Soon Now   Paul Mackerras
      • 4xx support in arch/ppc is going away Real Soon Now   Adrian Bunk
      • 4xx support in arch/ppc is going away Real Soon Now   Josh Boyer
      • 4xx support in arch/ppc is going away Real Soon Now   Grant Likely
      • 4xx support in arch/ppc is going away Real Soon Now   Paul Mackerras
      • 4xx support in arch/ppc is going away Real Soon Now   Jon Loeliger
      • 4xx support in arch/ppc is going away Real Soon Now   Geert Uytterhoeven
      • 4xx support in arch/ppc is going away Real Soon Now   John Linn
      • 4xx support in arch/ppc is going away Real Soon Now   Vitaly Bordug
      • 4xx support in arch/ppc is going away Real Soon Now   Matthias Fuchs
      • 4xx support in arch/ppc is going away Real Soon Now   Josh Boyer
• [RFC][PATCH] powerpc/85xx: add DOZE/NAP support for e500 core   Kumar Gala
• [PATCH] [v2] Fix definitions for dbcr0, dbcr1, & dbcr2 register for bookE processors   Jerone Young
  • [PATCH] [v2] Fix definitions for dbcr0, dbcr1, & dbcr2 register for bookE processors   Kumar Gala
  • [PATCH] [v2] Fix definitions for dbcr0, dbcr1, & dbcr2 register for bookE processors   Jerone Young
• [PATCH] [RFC v3] OF: OpenFirmware bindings for the mmc_spi driver   Anton Vorontsov
  • [PATCH] [RFC v3] OF: OpenFirmware bindings for the mmc_spi driver   Grant Likely
    • [PATCH] [RFC v3] OF: OpenFirmware bindings for the mmc_spi driver   Anton Vorontsov
      • [PATCH] [RFC v3] OF: OpenFirmware bindings for the mmc_spi driver   Grant Likely
      • [PATCH] [RFC v3] OF: OpenFirmware bindings for the mmc_spi driver   Anton Vorontsov
      • [PATCH] [RFC v3] OF: OpenFirmware bindings for the mmc_spi driver   Grant Likely
      • [PATCH] [RFC v3] OF: OpenFirmware bindings for the mmc_spi driver   Anton Vorontsov
      • [PATCH] [RFC v3] OF: OpenFirmware bindings for the mmc_spi driver   Grant Likely
• [PATCH v3 1/4] [POWERPC] 85xx: correct vendor prefix in DTS files for TQM85xx modules   Wolfgang Grandegger
  • [PATCH v3 1/4] [POWERPC] 85xx: correct vendor prefix in DTS files for TQM85xx modules   David Gibson
    • [PATCH v3 1/4] [POWERPC] 85xx: correct vendor prefix in DTS files for TQM85xx modules   Wolfgang Grandegger
• [PATCH v3 2/4] [POWERPC] 85xx: add board support for the TQM8548 modules   Wolfgang Grandegger
  • [PATCH v3 2/4] [POWERPC] 85xx: add board support for the TQM8548 modules   Kumar Gala
  • [PATCH v3 2/4] [POWERPC] 85xx: add board support for the TQM8548 modules   Wolfgang Grandegger
  • [PATCH v3 2/4] [POWERPC] 85xx: add board support for the TQM8548 modules   Kumar Gala
  • [PATCH v3 2/4] [POWERPC] 85xx: add board support for the TQM8548 modules   Wolfgang Grandegger
• [PATCH v3 3/4] [POWERPC] 85xx: support for the TQM8548 module using the big Flash   Wolfgang Grandegger
• [PATCH v3 4/4] [POWERPC] 85xx: add local bus nodes for Flash and CAN to tqm8560.dts   Wolfgang Grandegger
• jffs2 and unaligned access   Jon Smirl
• git Linux 2.6.26-rc5 - 53c8ba9: seems OK after short use   Wolfgang Pfeiffer
  • 2.6.26-rc5 DOA on mac g5   Andrew Morton
    • 2.6.26-rc5 DOA on mac g5   Andrew Morton
• Using GPIO   Ludovic Desroches
  • Using GPIO   Guillaume Dargaud
    • [PATCH v4 0/4] [POWERPC] 85xx: Add suport for TQM8548 and some TQM85xx fixes   Wolfgang Grandegger
    • [PATCH v4 1/4] [POWERPC] 85xx: correct vendor prefix in DTS files for TQM85xx modules   Wolfgang Grandegger
    • [PATCH v4 2/4] [POWERPC] 85xx: add board support for the TQM8548 modules   Wolfgang Grandegger
    • [PATCH v4 3/4] [POWERPC] 85xx: support for the TQM8548 module using the big Flash   Wolfgang Grandegger
    • [PATCH v4 4/4] [POWERPC] 85xx: add local bus nodes for Flash and CAN to tqm8560.dts   Wolfgang Grandegger
    • [PATCH v4 4/4] [POWERPC] 85xx: add local bus nodes for Flash and CAN to tqm8560.dts   Kumar Gala
    • [PATCH v4 3/4] [POWERPC] 85xx: support for the TQM8548 module using the big Flash   Kumar Gala
    • [PATCH v4 2/4] [POWERPC] 85xx: add board support for the TQM8548 modules   Kumar Gala
    • [PATCH v4 1/4] [POWERPC] 85xx: correct vendor prefix in DTS files for TQM85xx modules   Kumar Gala
• [PATCH v2] MTD support for the AMCC Taishan   Stefan Roese
• Ethernet performance problems MPC5200   Rob Broersen
• [PATCH] [POWERPC] 85xx: MPC8548CDS - Fix size of PCIe IO space   Kumar Gala
• IB/ehca: Reject send WRs only for RESET, INIT and RTR state   Joachim Fenkes
  • IB/ehca: Reject send WRs only for RESET, INIT and RTR state   Roland Dreier
  • [ofa-general] IB/ehca: Reject send WRs only for RESET, INIT and RTR state   Dotan Barak
    • [PATCH] IB/ehca: Reject recv WRs if QP is in RESET state   Joachim Fenkes
      • [PATCH] IB/ehca: Reject recv WRs if QP is in RESET state   Roland Dreier
• [v3] Fix definitions for dbcr0, dbcr1, & dbcr2 register for bookE processors   Jerone Young
• 750GX   Kevin Diggs
• [v4] Fix definitions for dbcr0, dbcr1, & dbcr2 register for bookE processors   Jerone Young
  • [v4] Fix definitions for dbcr0, dbcr1, & dbcr2 register for bookE processors   Kumar Gala
  • [v4] Fix definitions for dbcr0, dbcr1, & dbcr2 register for bookE processors   Kumar Gala
• [PATCH 1/2] [POWERPC] 86xx: suspend support   Anton Vorontsov
  • [PATCH 1/2] [POWERPC] 86xx: suspend support   Anton Vorontsov
• [PATCH 2/2] [POWERPC] 86xx: mpc8610_hpcd: add wakeup-on-sw9 support   Anton Vorontsov
• patch usb-isp1760-assign-resource-fields-before-adding-hcd.patch added to gregkh-2.6 tree   gregkh at suse.de
• patch usb-ohci-ppc-of-use-linux-of_platform.h-instead-of-asm.patch added to gregkh-2.6 tree   gregkh at suse.de
• [PATCH] powerpc: Get rid of CROSS32{AS,LD,OBJCOPY}   Segher Boessenkool
• Comments on device tree for pcm030   Jon Smirl
  • Comments on device tree for pcm030   Grant Likely
    • Comments on device tree for pcm030   Juergen Beisert
      • Comments on device tree for pcm030   Jon Smirl
      • Comments on device tree for pcm030   Juergen Beisert
      • Comments on device tree for pcm030   Jon Smirl
      • Comments on device tree for pcm030   Grant Likely
  • Comments on device tree for pcm030   Sascha Hauer
    • Comments on device tree for pcm030   Robert Schwebel
  • Comments on device tree for pcm030   Juergen Beisert
    • Comments on device tree for pcm030   Jon Smirl
      • Comments on device tree for pcm030   Juergen Beisert
      • Comments on device tree for pcm030   Juergen Beisert
      • Comments on device tree for pcm030   Grant Likely
      • Comments on device tree for pcm030   Jon Smirl
  • Comments on device tree for pcm030   Robert Schwebel
• SIR on MPC5200   Jon Smirl
• zImage.chrp is getting gziped on Efika   Jon Smirl
  • zImage.chrp is getting gziped on Efika   Jon Smirl
    • zImage.chrp is getting gziped on Efika   Jon Smirl
• [PATCH v3] [NAND] driver extension to support NAND on TQM85xx modules   Wolfgang Grandegger
• [PATCH] booting-without-of: add more bindings for FSL UPM driver   Wolfgang Grandegger
  • [PATCH] booting-without-of: add more bindings for FSL UPM driver   Segher Boessenkool
    • [PATCH] booting-without-of: add more bindings for FSL UPM driver   Wolfgang Grandegger
      • [PATCH] booting-without-of: add more bindings for FSL UPM driver   Segher Boessenkool
      • [PATCH] booting-without-of: add more bindings for FSL UPM driver   Wolfgang Grandegger
      • [PATCH] booting-without-of: add more bindings for FSL UPM driver   Wolfgang Grandegger
  • 2.6.26-rc5-mm1: procfs whine   Andrew Morton
    • 2.6.26-rc5-mm1: procfs whine   Jesse Barnes
• Changing from "[POWERPC]" to "powerpc:" in git headlines   Paul Mackerras
• More commits added to powerpc.git powerpc-next and master branches   Paul Mackerras
• [git pull] Please pull powerpc.git merge branch   Paul Mackerras
• [PATCH 1/4] arch/powerpc: add missing of_node_put   Julia Lawall
  • [PATCH 1/4] arch/powerpc: add missing of_node_put   Stephen Rothwell
• [PATCH 2/4] drivers/macintosh/smu.c: add missing of_node_put   Julia Lawall
  • [PATCH 2/4] drivers/macintosh/smu.c: add missing of_node_put   Stephen Rothwell
    • [PATCH 2/4] drivers/macintosh/smu.c: add missing of_node_put   Julia Lawall
      • [PATCH 2/4] drivers/macintosh/smu.c: add missing of_node_put   Stephen Rothwell
• [PATCH 4/4] drivers/macintosh/therm_adt746x.c: add missing of_node_put   Julia Lawall
  • [PATCH 4/4] drivers/macintosh/therm_adt746x.c: add missing of_node_put   Stephen Rothwell
• [RFC] Kprobes for book-e   Sulibhavi, Madhvesh
• Please pull from 'for-2.6.26' branch   Kumar Gala
  • Please pull from 'for-2.6.26' branch   Kumar Gala
• [PATCH][2.6.26] ehea: set mac address fix   Jan-Bernd Themann
  • [PATCH][2.6.26] ehea: set mac address fix   Jeff Garzik
• Is there any significant difference of memory management between PPC 405 and 440?   Evangelion
• [PATCH 0/2] Prevent loss of interrupts in IB/ehca   Stefan Roscher
  • [PATCH 0/2] Prevent loss of interrupts in IB/ehca   Paul Mackerras
    • [PATCH 0/2] Prevent loss of interrupts in IB/ehca   Stefan Roscher
      • [PATCH 0/2] Prevent loss of interrupts in IB/ehca   Paul Mackerras
• [PATCH 1/2] ibmebus: Change ibmebus_request_irq() to optionally return irq number   Stefan Roscher
  • [PATCH 1/2] ibmebus: Change ibmebus_request_irq() to optionally return irq number   Jan-Bernd Themann
  • [PATCH 1/2] ibmebus: Change ibmebus_request_irq() to optionally return irq number   Stephen Rothwell
• [PATCH 2/2] IB/ehca: In case of lost interrupts, trigger EOI to reenable interrupts   Stefan Roscher
  • [PATCH 2/2] IB/ehca: In case of lost interrupts, trigger EOI to reenable interrupts   Roland Dreier
• Making the Kernel   Jacob Holladay Poteet
  • Making the Kernel   Stephen Neuendorffer
• [2.6 patch] drivers/macintosh/: possible cleanups   Adrian Bunk
  • [2.6 patch] drivers/macintosh/: possible cleanups   Stephen Rothwell
    • [2.6 patch] drivers/macintosh/: possible cleanups   Adrian Bunk
      • [2.6 patch] drivers/macintosh/: possible cleanups   Geert Uytterhoeven
      • [2.6 patch] drivers/macintosh/: possible cleanups   Stephen Rothwell
  • [patch 1/5] powerpc: fix for OProfile callgraph for Power 64 bit user apps   akpm at linux-foundation.org
    • [patch 1/5] powerpc: fix for OProfile callgraph for Power 64 bit user apps   Benjamin Herrenschmidt
      • [patch 1/5] powerpc: fix for OProfile callgraph for Power 64 bit user apps   Michael Ellerman
      • [patch 1/5] powerpc: fix for OProfile callgraph for Power 64 bit user apps   Carl Love
    • [patch 1/5] powerpc: fix for OProfile callgraph for Power 64 bit user apps   Paul Mackerras
  • [patch 2/5] spufs: convert nopfn to fault   akpm at linux-foundation.org
    • [patch 2/5] spufs: convert nopfn to fault   Benjamin Herrenschmidt
  • [patch 3/5] macintosh: therm_windtunnel: semaphore to mutex   akpm at linux-foundation.org
    • [patch 3/5] macintosh: therm_windtunnel: semaphore to mutex   Benjamin Herrenschmidt
  • [patch 4/5] macintosh: media bay: semaphore to mutex   akpm at linux-foundation.org
    • [patch 4/5] macintosh: media bay: semaphore to mutex   Benjamin Herrenschmidt
  • [patch 5/5] arch/powerpc/platforms/pseries/eeh_driver.c: fix warning   akpm at linux-foundation.org
    • [patch 5/5] arch/powerpc/platforms/pseries/eeh_driver.c: fix warning   Benjamin Herrenschmidt
      • [patch 5/5] arch/powerpc/platforms/pseries/eeh_driver.c: fix warning   Andrew Morton
  • [patch 1/1] fsldma: the MPC8377MDS board device tree node for fsldma driver   akpm at linux-foundation.org
    • [patch 1/1] fsldma: the MPC8377MDS board device tree node for fsldma driver   Kumar Gala
• [PATCH] [POWERPC] Free a PTE bit on ppc64 with 64K pages   Michael Ellerman
  • [PATCH] [POWERPC] Free a PTE bit on ppc64 with 64K pages   Benjamin Herrenschmidt
• linux-next: powerpc/drivers-core merge conflict   Stephen Rothwell
• linux-next: powerpc build failure   Stephen Rothwell
  • linux-next: powerpc build failure   Benjamin Herrenschmidt
• Master and powerpc-next branches reset   Paul Mackerras
  • [PATCH] [POWERPC] 83xx: MPC837xRDB's VSC7385 ethernet switch isn't on the MDIO bus   Kumar Gala
• [PATCH 0/5] powerpc: cleanup of unused Kconfig symbols   arnd at arndb.de
  • [PATCH 1/5] powerpc: remove mpc8xx-ide driver   arnd at arndb.de
  • [PATCH 2/5] powerpc: remove hdpu drivers   arnd at arndb.de
  • [PATCH 3/5] powerpc/ibm_iic: remove support for OCP   arnd at arndb.de
    • [PATCH 3/5] powerpc/ibm_iic: remove support for OCP   Josh Boyer
    • [PATCH 3/5] powerpc/ibm_iic: remove support for OCP   Stephen Rothwell
      • [PATCH 3/5] powerpc/ibm_iic: remove support for OCP   Arnd Bergmann
  • [PATCH 4/5] powerpc: remove references to dead platforms   arnd at arndb.de
  • [PATCH 5/5] powerpc/mtd: remove dead platform specific maps   arnd at arndb.de
• Image generation for Efika is broken in 2.6.26   Jon Smirl
  • Image generation for Efika is broken in 2.6.26   Scott Wood
    • Image generation for Efika is broken in 2.6.26   Jon Smirl
      • Image generation for Efika is broken in 2.6.26   Jon Smirl
      • Image generation for Efika is broken in 2.6.26   Robert Schwebel
      • Image generation for Efika is broken in 2.6.26   Marc Kleine-Budde
    • Image generation for Efika is broken in 2.6.26   Marc Kleine-Budde
      • Image generation for Efika is broken in 2.6.26   Scott Wood
• [PATCH REPOST] IB/ehca: In case of lost interrupts, trigger EOI to reenable interrupts   Stefan Roscher
  • [PATCH REPOST] IB/ehca: In case of lost interrupts, trigger EOI to reenable interrupts   Roland Dreier
    • [PATCH REPOST] IB/ehca: In case of lost interrupts, trigger EOI to reenable interrupts   Stefan Roscher
      • [PATCH REPOST] IB/ehca: In case of lost interrupts, trigger EOI to reenable interrupts   Roland Dreier
      • [PATCH REPOST] IB/ehca: In case of lost interrupts, trigger EOI to reenable interrupts   Paul Mackerras
      • [PATCH REPOST] IB/ehca: In case of lost interrupts, trigger EOI to reenable interrupts   Stefan Roscher
  • [PATCH REPOST] IB/ehca: In case of lost interrupts, trigger EOI to reenable interrupts   Benjamin Herrenschmidt
  • [PATCH REPOST] IB/ehca: In case of lost interrupts, trigger EOI to reenable interrupts   Paul Mackerras
    • [PATCH 5/6] [POWERPC] 83xx: new board support: MPC8360E-RDK   Kumar Gala
    • [PATCH] powerpc: 83xx: update mpc83xx_defconfig to support MPC8360E-RDK   Anton Vorontsov
    • [PATCH] powerpc: 83xx: update mpc83xx_defconfig to support MPC8360E-RDK   Kumar Gala
    • [PATCH v2] powerpc/83xx: update mpc83xx_defconfig to support MPC8360E-RDK   Anton Vorontsov
    • [PATCH v3] powerpc/83xx: update mpc83xx_defconfig to support MPC8360E-RDK   Anton Vorontsov
    • [PATCH 1/7] [POWERPC] sysdev: implement FSL GTM support   Kumar Gala
    • [PATCH 2/7] [POWERPC] QE: add support for QE USB clocks routing   Kumar Gala
    • [PATCH 3/7] [POWERPC] QE: prepare QE PIO code for GPIO LIB support   Kumar Gala
    • [PATCH 7/7] [POWERPC] qe_lib: switch to the cpm_muram implementation   Kumar Gala
    • [PATCH 4/7] [POWERPC] QE: implement support for the GPIO LIB API   Kumar Gala
    • [PATCH 4/7] [POWERPC] QE: implement support for the GPIO LIB API   Anton Vorontsov
    • [PATCH 4/7] [POWERPC] QE: implement support for the GPIO LIB API   Kumar Gala
    • [PATCH] powerpc/QE: use arch_initcall to probe QUICC Engine GPIOs   Anton Vorontsov
    • [PATCH] powerpc/QE: use arch_initcall to probe QUICC Engine GPIOs   Kumar Gala
• [2.6 patch] drivers/macintosh/mediabay.c build fix   Adrian Bunk
• [PATCH] prtlvt board support (MPC5121e) added   Grant Likely
• [RFC:PATCH 00/06] Strong Access Ordering page attributes for POWER7   Dave Kleikamp
  • [RFC:PATCH 02/06] mm: Allow architectures to define additional protection bits   Dave Kleikamp
    • [RFC:PATCH 02/06] mm: Allow architectures to define additional protection bits   Andrew Morton
    • [RFC:PATCH 02/06] mm: Allow architectures to define additional protection bits   Dave Kleikamp
  • [RFC:PATCH 03/06] powerpc: Define flags for Strong Access Ordering   Dave Kleikamp
  • [RFC:PATCH 04/06] powerpc: Define CPU_FTR_SAO   Dave Kleikamp
  • [RFC:PATCH 05/06] powerpc: Add Strong Access Ordering   Dave Kleikamp
  • [RFC:PATCH 06/06] powerpc: Don't clear _PAGE_COHERENT when _PAGE_SAO is set   Dave Kleikamp
    • [RFC:PATCH 06/06] powerpc: Don't clear _PAGE_COHERENT when _PAGE_SAO is set   Sergei Shtylyov
      • [RFC:PATCH 06/06] powerpc: Don't clear _PAGE_COHERENT when _PAGE_SAO is set   Dave Kleikamp
• [RFC:PATCH 01/06] powerpc: hash_huge_page() should get the WIMG bits from the lpte   Dave Kleikamp
• [PATCH] powerpc: implement OF PCI address accessors stubs for CONFIG_PCI=n   Anton Vorontsov
• [RFC/PATCH] powerpc: rework 4xx PTE access and TLB miss   Benjamin Herrenschmidt
  • [RFC/PATCH] powerpc: rework 4xx PTE access and TLB miss   Kumar Gala
  • [RFC/PATCH] powerpc: rework 4xx PTE access and TLB miss   Benjamin Herrenschmidt
  • [RFC/PATCH] powerpc: rework 4xx PTE access and TLB miss   Kumar Gala
  • [RFC/PATCH] powerpc: rework 4xx PTE access and TLB miss   Benjamin Herrenschmidt
  • [RFC/PATCH] powerpc: rework 4xx PTE access and TLB miss   Josh Boyer
• [PATCH] Convert i2c-mpc from a platform driver to an of_platform one   Jon Smirl
  • [i2c] [PATCH] Convert i2c-mpc from a platform driver to an of_platform one   Wolfram Sang
    • [i2c] [PATCH] Convert i2c-mpc from a platform driver to an of_platform one   Jon Smirl
      • [i2c] [PATCH] Convert i2c-mpc from a platform driver to an of_platform one   Jean Delvare
  • [i2c] [PATCH] Convert i2c-mpc from a platform driver to an of_platform one   Jean Delvare
    • [i2c] [PATCH] Convert i2c-mpc from a platform driver to an of_platform one   Jon Smirl
      • [i2c] [PATCH] Convert i2c-mpc from a platform driver to an of_platform one   Grant Likely
      • [i2c] [PATCH] Convert i2c-mpc from a platform driver to an of_platform one   Jean Delvare
      • [i2c] [PATCH] Convert i2c-mpc from a platform driver to an of_platform one   Grant Likely
      • [i2c] [PATCH] Convert i2c-mpc from a platform driver to an of_platform one   Jean Delvare
      • [i2c] [PATCH] Convert i2c-mpc from a platform driver to an of_platform one   Sean MacLennan
      • [i2c] [PATCH] Convert i2c-mpc from a platform driver to an of_platform one   Jean Delvare
      • [i2c] [PATCH] Convert i2c-mpc from a platform driver to an of_platform one   David Brownell
  • [PATCH] Convert i2c-mpc from a platform driver to an of_platform one   Grant Likely
• [PATCH] powerpc: Free a PTE bit on ppc64 with 64K pages   Benjamin Herrenschmidt
• linux-next: powerpc build failure   Stephen Rothwell
  • linux-next: powerpc build failure   Ingo Molnar
    • linux-next: powerpc build failure   Paul Mackerras
      • linux-next: powerpc build failure   Alan Modra
      • linux-next: powerpc build failure   Stephen Rothwell
      • linux-next: powerpc build failure   Ingo Molnar
      • linux-next: powerpc build failure   Stephen Rothwell
      • linux-next: powerpc build failure   Ingo Molnar
      • linux-next: powerpc build failure   Benjamin Herrenschmidt
      • linux-next: powerpc build failure   Stephen Rothwell
      • linux-next: powerpc build failure   Sam Ravnborg
      • linux-next: powerpc build failure   Alan Modra
• Please pull 'for-2.6.26' branch of 4xx tree   Josh Boyer
• [PATCH] powerpc/QE: qe_reset should be __init   Anton Vorontsov
  • [PATCH] powerpc/QE: qe_reset should be __init   Kumar Gala
• Patches added to 4xx 'next' branch   Josh Boyer
• [PATCH] prtlvt board support (MPC5121e) added   Grant Likely
• [RFC] Kprobes for book-e   Sulibhavi, Madhvesh
  • [RFC] Kprobes for book-e   Kumar Gala
  • [RFC] Kprobes for book-e   Kumar Gala
• [PATCH] powerpc/4xx: Workaround for PPC440EPx/GRx PCI_28 Errata   Josh Boyer
  • [PATCH] powerpc/4xx: Workaround for PPC440EPx/GRx PCI_28 Errata   Stefan Roese
    • [PATCH] powerpc/4xx: Workaround for PPC440EPx/GRx PCI_28 Errata   Josh Boyer
      • how to check for "optional" ppc chip features (MSR_BE)   Kumar Gala
• [PATCH] powerpc/cell: disable ptcal in case of kdump reboot   Arnd Bergmann
  • please pull merge branch of cell-2.6.git   Arnd Bergmann
  • [Cbe-oss-dev] [PATCH] powerpc/cell: disable ptcal in case of kdump reboot   Michael Ellerman
    • [Cbe-oss-dev] [PATCH] powerpc/cell: disable ptcal in case of kdump reboot   Arnd Bergmann
      • [Cbe-oss-dev] [PATCH] powerpc/cell: disable ptcal in case of kdump reboot   Michael Neuling
      • [Cbe-oss-dev] [PATCH] powerpc/cell: disable ptcal in case of kdump reboot   Michael Ellerman
      • [Cbe-oss-dev] [PATCH] powerpc/cell: disable ptcal in case of kdump reboot   Michael Neuling
• [PATCH] powerpc/booke: Fix definitions for dbcr[1-2] and dbsr registers   Kumar Gala
  • [PATCH v2] powerpc/booke: Fix definitions for dbcr[1-2] and dbsr registers   Kumar Gala
  • [PATCH] powerpc/booke: Fix definitions for dbcr[1-2] and dbsr registers   Jerone Young
• [PATCH] powerpc/booke: Fix some comments related to debug level exceptions   Kumar Gala
• mpc52xx_psc.h   Jon Smirl
  • mpc52xx_psc.h   Grant Likely
• [PATCH 0/4] Fix RTC for MPC8572DS and support RTC on MPC8610HPCD   Anton Vorontsov
  • [PATCH 1/4] powerpc: fsl_uli1575: fix RTC quirk to work on MPC8572DS and MPC8610HPCD   Anton Vorontsov
  • [PATCH 2/4] powerpc/85xx/86xx: some refactoring for fsl_uli1575 code   Anton Vorontsov
  • [PATCH 3/4] powerpc: rtc_cmos_setup: assign interrupts only if there is i8259 PIC   Anton Vorontsov
  • [PATCH 4/4] powerpc/86xx: mpc8610_hpcd: add support for ULI RTC   Anton Vorontsov
  • [PATCH] [85xx] powerpc: Update pin setup for 8560ads   Vitaly Bordug
    • [PATCH] [85xx] powerpc: Update pin setup for 8560ads   Kumar Gala
  • [PATCH] [82xx] powerpc: Add support for mpc8247 based board MGCOGE from keymile.   Vitaly Bordug
    • [PATCH] [82xx] powerpc: Add support for mpc8247 based board MGCOGE from keymile.   Scott Wood
      • [PATCH] [82xx] powerpc: Add support for mpc8247 based board MGCOGE from keymile.   Heiko Schocher
      • [PATCH] [82xx] powerpc: Add support for mpc8247 based board MGCOGE from keymile.   Scott Wood
      • [PATCH] [82xx] powerpc: Add support for mpc8247 based board MGCOGE from keymile.   Vitaly Bordug
      • [PATCH] [82xx] powerpc: Add support for mpc8247 based board MGCOGE from keymile.   David Gibson
      • [PATCH] [82xx] powerpc: Add support for mpc8247 based board MGCOGE from keymile.   Heiko Schocher
      • [PATCH] [82xx] powerpc: Add support for mpc8247 based board MGCOGE from keymile.   Scott Wood
      • [PATCH] [82xx] powerpc: Add support for mpc8247 based board MGCOGE from keymile.   Heiko Schocher
      • [PATCH] [82xx] powerpc: Add support for mpc8247 based board MGCOGE from keymile.   Heiko Schocher
  • [PATCH] [fs_enet] powerpc: Fix SCC Ethernet on CPM2, and crash in fs_enet_rx_napi()   Vitaly Bordug
  • [PATCH] [8xx] powerpc: Add support for the MPC852 based mgsuvd board from keymile.   Vitaly Bordug
    • [PATCH] [8xx] powerpc: Add support for the MPC852 based mgsuvd board from keymile.   Scott Wood
      • [PATCH] [8xx] powerpc: Add support for the MPC852 based mgsuvd board from keymile.   Heiko Schocher
      • [PATCH] [8xx] powerpc: Add support for the MPC852 based mgsuvd board from keymile.   Scott Wood
      • [PATCH] [8xx] powerpc: Add support for the MPC852 based mgsuvd board from keymile.   Heiko Schocher
      • [PATCH] [8xx] powerpc: Add support for the MPC852 based mgsuvd board from keymile.   Stephen Rothwell
      • [PATCH] [8xx] powerpc: Add support for the MPC852 based mgsuvd board from keymile.   Heiko Schocher
      • [PATCH] [8xx] powerpc: Add support for the MPC852 based mgsuvd board from keymile.   Stephen Rothwell
• Merging seperate FDT-blobs?   Wolfram Sang
  • Merging seperate FDT-blobs?   David Gibson
    • Merging seperate FDT-blobs?   Wolfram Sang
      • Merging seperate FDT-blobs?   David Gibson
      • Merging seperate FDT-blobs?   Wolfram Sang
• [patch 0/3] disable ptcal in case of kdump reboot, v2   Arnd Bergmann
  • [patch 1/3] powerpc: provide dummy crash_shutdown_register   Arnd Bergmann
  • [patch 3/3] powerpc/cell: disable ptcal in case of crash kdump   Arnd Bergmann
    • [patch 3/3] powerpc/cell: disable ptcal in case of crash kdump   Jeremy Kerr
  • [PATCH 4/3] powerpc: increase CRASH_HANDLER_MAX   Arnd Bergmann
• [patch 2/3] powerpc/pseries: call pseries_kexec_setup only on pseries   Arnd Bergmann
• [PATCH 1/2] Added support for PRTLVT based boards (MPC5121)   David Jander
  • [PATCH 2/2] Re-added support for FEC on MPC5121 from Freescale LTIB to current head   David Jander
    • [PATCH 2/2] Re-added support for FEC on MPC5121 from Freescale LTIB to current head   Grant Likely
  • [PATCH 1/2] Added support for PRTLVT based boards (MPC5121)   Grant Likely
    • [PATCH 1/2] Added support for PRTLVT based boards (MPC5121)   David Gibson
      • [PATCH 1/2] Added support for PRTLVT based boards (MPC5121)   Grant Likely
      • [PATCH 2/2] Re-added support for FEC on MPC5121 from Freescale LTIB to current head   Kumar Gala
      • [PATCH 2/2] Re-added support for FEC on MPC5121 from Freescale LTIB to current head   Grant Likely
      • [PATCH 2/2] Re-added support for FEC on MPC5121 from Freescale LTIB to current head   David Jander
      • [PATCH 1/5] powerpc: remove mpc8xx-ide driver   Kumar Gala
      • [PATCH 1/5] powerpc: remove mpc8xx-ide driver   Arnd Bergmann
• [GIT PULL] one kbuild fix for powerpc   Sam Ravnborg
  • [GIT PULL] one kbuild fix for powerpc   roel kluin
    • [GIT PULL] one kbuild fix for powerpc   Sam Ravnborg
      • [PATCH 0/5] Kill CONFIG_PPC_CPM_NEW_BINDING   Kumar Gala
      • [PATCH 1/5] cpm_uart: fix whitespace issues   Kumar Gala
      • [PATCH 2/5] cpm_uart: Remove !CONFIG_PPC_CPM_NEW_BINDING code   Kumar Gala
      • [PATCH 3/5] powerpc/cpm: Remove !CONFIG_PPC_CPM_NEW_BINDING code   Kumar Gala
      • [PATCH 4/5] fs_enet: Remove !CONFIG_PPC_CPM_NEW_BINDING code   Kumar Gala
      • [PATCH 5/5] powerpc: Remove Kconfig PPC_CPM_NEW_BINDING   Kumar Gala
• [RFC] Kprobes for book-e   Sulibhavi, Madhvesh
• [RFC PATCH 0/2] Merge HUGETLB_PAGE and HUGETLBFS Kconfig options   Adam Litke
  • [RFC PATCH 1/2] Merge options into CONFIG_HUGETLB   Adam Litke
  • [RFC PATCH 2/2] Update defconfigs for CONFIG_HUGETLB   Adam Litke
    • [RFC PATCH 2/2] Update defconfigs for CONFIG_HUGETLB   Adrian Bunk
      • [RFC PATCH 2/2] Update defconfigs for CONFIG_HUGETLB   Adam Litke
    • [RFC PATCH 0/2] Merge HUGETLB_PAGE and HUGETLBFS Kconfig options   Ralf Baechle
• Using DMA interrupt on MPC8313   Ron Madrid
  • Using DMA interrupt on MPC8313   Kumar Gala
  • Using DMA interrupt on MPC8313   Ron Madrid
  • Using DMA interrupt on MPC8313   Kumar Gala
  • Using DMA interrupt on MPC8313   Ron Madrid
  • Using DMA interrupt on MPC8313   Kumar Gala
  • Using DMA interrupt on MPC8313   Ron Madrid
  • Using DMA interrupt on MPC8313   Timur Tabi
  • Using DMA interrupt on MPC8313   Ron Madrid
  • Using DMA interrupt on MPC8313   Timur Tabi
  • Using DMA interrupt on MPC8313   Kumar Gala
  • Using DMA interrupt on MPC8313   Ron Madrid
  • Using DMA interrupt on MPC8313   Scott Wood
  • Using DMA interrupt on MPC8313   Ron Madrid
  • Using DMA interrupt on MPC8313   Timur Tabi
  • Using DMA interrupt on MPC8313   Scott Wood
  • Using DMA interrupt on MPC8313   Ron Madrid
  • Using DMA interrupt on MPC8313   jumpingProgrammer
  • Using DMA interrupt on MPC8313   Scott Wood
• [PATCH 1/2][FOR 2.6.26][POWERPC] Fix bootwrapper builds with newer gcc versions   Kumar Gala
  • [PATCH 2/2][FOR 2.6.26][POWERPC] Fix -Os kernel builds with newer gcc versions   Kumar Gala
• [PATCH 00/19] powerpc: pSeries Cooperative Memory Overcommitment support   Robert Jennings
  • [PATCH 01/19] powerpc: Remove extraneous error reporting for hcall failures in lparcfg   Robert Jennings
  • [PATCH 02/19] powerpc: Split processor entitlement retrieval and gathering to helper routines   Robert Jennings
    • [PATCH 02/19] powerpc: Split processor entitlement retrieval and gathering to helper routines   Stephen Rothwell
      • [PATCH 02/19] powerpc: Split processor entitlement retrieval and gathering to helper routines   Nathan Fontenot
    • [PATCH 02/19] powerpc: Split processor entitlement retrieval and gathering to helper routines   Nathan Fontenot
  • [PATCH 03/19] powerpc: Add memory entitlement capabilities to /proc/ppc64/lparcfg   Robert Jennings
    • [PATCH 03/19][v2] powerpc: Add memory entitlement capabilities to /proc/ppc64/lparcfg   Nathan Fontenot
    • [PATCH 03/19][v3] powerpc: Add memory entitlement capabilities to /proc/ppc64/lparcfg   Nathan Fontenot
      • [PATCH 03/19][v3] powerpc: Add memory entitlement capabilities to /proc/ppc64/lparcfg   Brian King
    • [PATCH 03/19] powerpc: Add memory entitlement capabilities to /proc/ppc64/lparcfg   Nathan Fontenot
  • [PATCH 04/19] powerpc: Split retrieval of processor entitlement data into a helper routine   Robert Jennings
  • [PATCH 05/19] powerpc: Enable CMO feature during platform setup   Robert Jennings
  • [PATCH 06/19] powerpc: Utilities to set firmware page state   Robert Jennings
  • [PATCH 07/19] powerpc: Add collaborative memory manager   Robert Jennings
  • [PATCH 08/19] powerpc: Do not probe PCI buses or eBus devices if CMO is enabled   Robert Jennings
  • [PATCH 09/19] powerpc: Add CMO paging statistics   Robert Jennings
  • [PATCH 10/19] powerpc: move get_longbusy_msecs out of ehca/ehea   Robert Jennings
    • [PATCH 10/19] [repost] powerpc: move get_longbusy_msecs out of ehca/ehea   Robert Jennings
      • [PATCH 10/19] [repost] powerpc: move get_longbusy_msecs out of ehca/ehea   Brian King
      • [PATCH 10/19] [repost] powerpc: move get_longbusy_msecs out of ehca/ehea   Jeff Garzik
  • [PATCH 11/19] powerpc: iommu enablement for CMO   Robert Jennings
    • [PATCH 11/19] powerpc: iommu enablement for CMO   Olof Johansson
      • [PATCH 11/19] powerpc: iommu enablement for CMO   Robert Jennings
    • [PATCH 11/19][v2] powerpc: iommu enablement for CMO   Robert Jennings
  • [PATCH 12/19] powerpc: vio bus support for CMO   Robert Jennings
    • [PATCH 12/19] powerpc: vio bus support for CMO   Stephen Rothwell
      • [PATCH 12/19] powerpc: vio bus support for CMO   Robert Jennings
    • [PATCH 12/19][v2] powerpc: vio bus support for CMO   Robert Jennings
  • [PATCH 13/19] powerpc: Verify CMO memory entitlement updates with virtual I/O   Robert Jennings
  • [PATCH 14/19] powerpc: hvc enablement for CMO   Robert Jennings
  • [PATCH 15/19] powerpc: hvcs enablement for CMO   Robert Jennings
  • [PATCH 16/19] ibmveth: Automatically enable larger rx buffer pools for larger mtu   Robert Jennings
    • [PATCH 16/19] ibmveth: Automatically enable larger rx buffer pools for larger mtu   Stephen Rothwell
    • [PATCH 16/19][v2] ibmveth: Automatically enable larger rx buffer pools for larger mtu   Robert Jennings
  • [PATCH 17/19] ibmveth: enable driver for CMO   Robert Jennings
    • [PATCH 17/19] ibmveth: enable driver for CMO   Stephen Rothwell
    • [PATCH 17/19][v2] ibmveth: enable driver for CMO   Robert Jennings
  • [PATCH 18/19] ibmvscsi: driver enablement for CMO   Robert Jennings
    • [PATCH 18/19] ibmvscsi: driver enablement for CMO   Brian King
  • [PATCH 19/19] powerpc: Update arch vector to indicate support for CMO   Robert Jennings
• [PATCH 1/7] ide-pmac: bugfix for media-bay support rework   Bartlomiej Zolnierkiewicz
  • [PATCH 2/7] ide-pmac: add ->cable_detect method   Bartlomiej Zolnierkiewicz
  • [PATCH 3/7] ide-pmac: remove bogus comment about pmac_ide_setup_device()   Bartlomiej Zolnierkiewicz
  • [PATCH 4/7] ide-pmac: media-bay support fixes   Bartlomiej Zolnierkiewicz
  • [PATCH 5/7] ide-pmac: store pmif instead of hwif in ->driver_data   Bartlomiej Zolnierkiewicz
  • [PATCH 6/7] ide-pmac: add ->init_dev method   Bartlomiej Zolnierkiewicz
  • [PATCH 7/7] ide-pmac: move ide_find_port() call to pmac_ide_setup_device()   Bartlomiej Zolnierkiewicz
• [PATCH] Added support for PRTLVT based boards (MPC5121)   David Jander
  • [PATCH] Added support for PRTLVT based boards (MPC5121)   John Rigby
    • [PATCH] Added support for PRTLVT based boards (MPC5121)   David Jander
      • [PATCH] Added support for PRTLVT based boards (MPC5121)   John Rigby
      • [PATCH] Added support for PRTLVT based boards (MPC5121)   David Jander
• [RFC][PATCH] powerpc: add usable-memory property to drconf memory   Chandru
  • [RFC][PATCH] powerpc: add usable-memory property to drconf memory   Chandru
• [PATCH 5/6] ibm_newemac: PowerPC 440GX EMAC PHY clock workaround   Luis Machado
  • [PATCHv2 1/2] [POWERPC] CPM2: Implement GPIO LIB API on CPM2 Freescale SoC.   Laurent Pinchart
    • [PATCHv2 1/2] [POWERPC] CPM2: Implement GPIO LIB API on CPM2 Freescale SoC.   Anton Vorontsov
      • [PATCHv2 1/2] [POWERPC] CPM2: Implement GPIO LIB API on CPM2 Freescale SoC.   Laurent Pinchart
      • [PATCHv2 1/2] [POWERPC] CPM2: Implement GPIO LIB API on CPM2 Freescale SoC.   Jochen Friedrich
      • [PATCHv3 1/2] [POWERPC] CPM2: Implement GPIO LIB API on CPM2 Freescale SoC.   Laurent Pinchart
      • [PATCHv3 1/2] [POWERPC] CPM2: Implement GPIO LIB API on CPM2 Freescale SoC.   Laurent Pinchart
      • [PATCHv3 1/2] [POWERPC] CPM2: Implement GPIO LIB API on CPM2 Freescale SoC.   Jochen Friedrich
• [RFC PATCH 0/2] Merge HUGETLB_PAGE and HUGETLBFS Kconfig options   Adam Litke
• XLLTemac with SGDMA working on virtex4FX ?   Simon Frey
  • XLLTemac with SGDMA working on virtex4FX ?   John Linn
    • XLLTemac with SGDMA working on virtex4FX ?   Simon Frey
    • XLLTemac with SGDMA working on virtex4FX ?   Johann Baudy
    • XLLTemac with SGDMA working on virtex4FX ?   John Linn
  • XLLTemac with SGDMA working on virtex4FX ?   Stephen Neuendorffer
• [PATCH REPOST #2] IB/ehca: In case of lost interrupts, trigger EOI to reenable interrupts   Stefan Roscher
  • [PATCH REPOST #2] IB/ehca: In case of lost interrupts, trigger EOI to reenable interrupts   Roland Dreier
  • [PATCH REPOST #2] IB/ehca: In case of lost interrupts, trigger EOI to reenable interrupts   Benjamin Herrenschmidt
  • [PATCH REPOST #2] IB/ehca: In case of lost interrupts, trigger EOI to reenable interrupts   Roland Dreier
• [RFC] poweroff via pm_power_off if set   Christian Krafft
  • [RFC] poweroff via pm_power_off if set   Kumar Gala
  • [RFC] poweroff via pm_power_off if set   Christian Krafft
• Xilinx EDK 10.1 and XUPV2P: A little report   Ricardo Ribalda Delgado
  • [PATCH] powerpc: Silly spelling fix in pgtable-ppc32   Becky Bruce
  • [PATCH 1/2] powerpc: Change BAT code to use phys_addr_t   Becky Bruce
  • [PATCH 2/2] powerpc: Get rid of bitfields in ppc_bat struct   Becky Bruce
  • Question regarding mpic_assign_isu() in storcenter.c   Eric Witcher
• [Bug 10714] Badness seen on 2.6.26-rc2 with lockdep enabled   Adrian Bunk
  • [Bug 10714] Badness seen on 2.6.26-rc2 with lockdep enabled   Benjamin Herrenschmidt
• macmini g4 can't boot with new kernel   Dave Young
  • macmini g4 can't boot with new kernel   Benjamin Herrenschmidt
    • macmini g4 can't boot with new kernel   Dave Young
• [PATCH] [POWERPC] Fix return value check logic   Medve Emilian
• [PATCH] powerpc: ppc32 does not need console_drivers exported   Stephen Rothwell
• BUG() in current git, __dma_alloc_coherent, Beige G3   Joseph Fannin
  • BUG() in current git, __dma_alloc_coherent, Beige G3   Benjamin Herrenschmidt
    • BUG() in current git, __dma_alloc_coherent, Beige G3   Gerhard Pircher
      • BUG() in current git, __dma_alloc_coherent, Beige G3   Benjamin Herrenschmidt
    • BUG() in current git, __dma_alloc_coherent, Beige G3   Joseph Fannin
      • BUG() in current git, __dma_alloc_coherent, Beige G3   Benjamin Herrenschmidt
• [git pull] Please pull powerpc.git merge branch   Paul Mackerras
  • [git pull] Please pull powerpc.git merge branch   Benjamin Herrenschmidt
  • [git pull] Please pull powerpc.git merge branch   Paul Mackerras
    • [git pull] Please pull powerpc.git merge branch   Adrian Bunk
• CPM2 mii-bitbang: Allowing mdio on port pins other than port C   Mark Ware
  • CPM2 mii-bitbang: Allowing mdio on port pins other than port C   Laurent Pinchart
    • CPM2 mii-bitbang: Allowing mdio on port pins other than port C   Mark Ware
    • CPM2 mii-bitbang: Allowing mdio on port pins other than port C   Laurent Pinchart
  • Carol Dann is out of the office.   Sheau-Jiuan Dann
  • [PATCH 2/2] fs_enet: MDIO on GPIO support   Laurent Pinchart
    • [PATCH 2/2] fs_enet: MDIO on GPIO support   Scott Wood
      • [PATCH 2/2] fs_enet: MDIO on GPIO support   Laurent Pinchart
      • [PATCH 2/2] fs_enet: MDIO on GPIO support   Jeff Garzik
      • [PATCH 2/2] fs_enet: MDIO on GPIO support   Laurent Pinchart
      • [PATCH 2/2] fs_enet: MDIO on GPIO support   Laurent Pinchart
      • [PATCH 2/2] fs_enet: MDIO on GPIO support   Vitaly Bordug
• Xilinx EDK 10.1 and XUPV2P: A little report   Ricardo
• [PATCH] [RFC v3] OF: OpenFirmware bindings for the mmc_spi driver   Anton Vorontsov
• [PATCH] [RFC v3] OF: OpenFirmware bindings for the mmc_spi driver   Grant Likely
• [PATCH] powerpc/booke: Add support for new e500mc core   Kumar Gala
  • [PATCH] powerpc/booke: Add support for new e500mc core   Becky Bruce
  • [PATCH] powerpc/booke: Add support for new e500mc core   Kumar Gala
  • [PATCH] powerpc/booke: Add support for new e500mc core   Olof Johansson
  • [PATCH] powerpc/booke: Add support for new e500mc core   Kumar Gala
  • [PATCH] powerpc/booke: Add support for new e500mc core   Olof Johansson
  • [PATCH] powerpc/booke: Add support for new e500mc core   Kumar Gala
  • [PATCH] powerpc/booke: Add support for new e500mc core   Olof Johansson
  • [PATCH] powerpc/booke: Add support for new e500mc core   Kumar Gala
  • [PATCH] powerpc/booke: Add support for new e500mc core   Benjamin Herrenschmidt
    • [PATCH] powerpc/booke: Add support for new e500mc core   Kumar Gala
• [PATCH 1/4] crypto/talitos: rm duplicate timeout definition   Kim Phillips
  • [PATCH 1/4] crypto/talitos: rm duplicate timeout definition   Herbert Xu
• [PATCH 2/4] crypto/talitos: unmap h/w generated IV   Kim Phillips
• [PATCH 3/4] crypto/talitos: fix premature done handling   Kim Phillips
• [PATCH 4/4] crypto/talitos: add hwrng support   Kim Phillips
• [PATCH] Power5,Power6 BSR driver   jschopp at austin.ibm.com
  • [PATCH] Power5,Power6 BSR driver   Nathan Lynch
    • [PATCH] Power5,Power6 BSR driver   Sonny Rao
  • [PATCH] Power5,Power6 BSR driver   Sonny Rao
• [PATCH] 85xx: publish of device for cds platforms   Dave Jiang
  • [PATCH] 85xx: publish of device for cds platforms   Scott Wood
    • [PATCH v2] 85xx: publish of device for cds platforms   Dave Jiang
  • Problems with NFS root on arch/ppc after pulling 2.6.26-rc6, on PPC405   John Linn
• [PATCH 2/4] spi: split up spi_new_device() to allow two stage registration.   Grant Likely
  • [PATCH 2/4] spi: split up spi_new_device() to allow two stage registration.   David Brownell
• [PATCH]: [MPC5200] Add ATA DMA support   Tim Yamin
• [PATCH]: [MPC5200] Fix lite5200b suspend/resume   Tim Yamin
  • user memory access problem   Andre Schwarz
• [RFC] Kprobes for book-e   Sulibhavi, Madhvesh
  • [RFC] Kprobes for book-e   Kumar Gala
• XLLTemac with SGDMA working on virtex4FX ?   Simon Frey
  • XLLTemac with SGDMA working on virtex4FX ?   John Linn
    • XLLTemac with SGDMA working on virtex4FX ?   John Linn
• [PATCH v2] powerpc/booke: Add support for new e500mc core   Kumar Gala
  • [PATCH v2] powerpc/booke: Add support for new e500mc core   Scott Wood
    • [PATCH v2] powerpc/booke: Add support for new e500mc core   Kumar Gala
    • [PATCH v2] powerpc/booke: Add support for new e500mc core   Scott Wood
    • [PATCH v2] powerpc/booke: Add support for new e500mc core   Kumar Gala
    • [PATCH v2] powerpc/booke: Add support for new e500mc core   Scott Wood
    • [PATCH v2] powerpc/booke: Add support for new e500mc core   Kumar Gala
    • [PATCH v2] powerpc/booke: Add support for new e500mc core   Scott Wood
    • [PATCH v2] powerpc/booke: Add support for new e500mc core   Scott Wood
    • [PATCH v2] powerpc/booke: Add support for new e500mc core   Kumar Gala
  • [PATCH v2] powerpc/booke: Add support for new e500mc core   Paul Mackerras
    • [PATCH v2] USB: isp1760: Support board-specific hardware configurations   Nate Case
    • [PATCH v2] USB: isp1760: Support board-specific hardware configurations   Olof Johansson
    • [PATCH v2] USB: isp1760: Support board-specific hardware configurations   Sebastian Siewior
    • [PATCH v2] USB: isp1760: Support board-specific hardware configurations   Olof Johansson
    • [PATCH v2] USB: isp1760: Support board-specific hardware configurations   Sebastian Siewior
• [PATCH] powerpc: clrsetbits_le16: fix copy-and-paste error   Scott Wood
  • [PATCH] MPC5121 FEC support   John Rigby
  • [PATCH] MPC5121 FEC support   Scott Wood
  • [PATCH] MPC5121 FEC support   Stephen Rothwell
  • [PATCH] MPC5121 FEC support   John Rigby
  • [PATCH] [Rev2] MPC5121 FEC support   John Rigby
  • [PATCH] [Rev2] MPC5121 FEC support   Sam Ravnborg
  • [PATCH] [Rev2] MPC5121 FEC support   Scott Wood
  • [PATCH] [Rev2] MPC5121 FEC support   Sam Ravnborg
  • [PATCH] [Rev2] MPC5121 FEC support   John Rigby
  • [PATCH] [Rev2] MPC5121 FEC support   Sam Ravnborg
  • [PATCH] [Rev2] MPC5121 FEC support   Scott Wood
  • [PATCH] [Rev2] MPC5121 FEC support   Sam Ravnborg
  • [PATCH] [Rev2] MPC5121 FEC support   Scott Wood
  • [PATCH] [Rev2] MPC5121 FEC support   Sam Ravnborg
  • [PATCH] [Rev2] MPC5121 FEC support   Scott Wood
  • [PATCH] [Rev2] MPC5121 FEC support   Trent Piepho
  • [PATCH] [Rev2] MPC5121 FEC support   Sam Ravnborg
  • [PATCH] [Rev2] MPC5121 FEC support   Scott Wood
• Loading drivers based on board identification   Mark Brown
  • Loading drivers based on board identification   Stephen Neuendorffer
    • Loading drivers based on board identification   Mark Brown
• [PATCH] [POWERPC] 4xx: Clear new TLB cache attribute bits in Data Storage vector   Josh Boyer
  • [PATCH] [POWERPC] 4xx: Clear new TLB cache attribute bits in Data Storage vector   Josh Boyer
    • [PATCH 0/2] Add MPC5121 FEC suppport   John Rigby
    • [PATCH 1/2] fs_enet: fix checkpatch.pl problems   John Rigby
    • [PATCH 1/2] fs_enet: fix checkpatch.pl problems   Jeff Garzik
    • [PATCH 1/2] fs_enet: fix checkpatch.pl problems   John Rigby
    • [PATCH 1/2] fs_enet: fix checkpatch.pl problems   Kumar Gala
    • [PATCH 1/2] fs_enet: fix checkpatch.pl problems   Grant Likely
    • [PATCH 1/2] fs_enet: fix checkpatch.pl problems   John Rigby
    • [PATCH 1/2] fs_enet: fix checkpatch.pl problems   Scott Wood
    • [PATCH 2/2] fs_enet: add MPC5121 FEC support   John Rigby
• [PATCH] ibm_newemac: select CRC32 in Kconfig   Josh Boyer
  • [PATCH] ibm_newemac: select CRC32 in Kconfig   Jeff Garzik
• [PATCH] ibm_emac: Remove the ibm_emac driver   Josh Boyer
  • [PATCH] ibm_emac: Remove the ibm_emac driver   Sean MacLennan
    • [PATCH] ibm_emac: Remove the ibm_emac driver   Benjamin Herrenschmidt
      • [PATCH] ibm_emac: Remove the ibm_emac driver   Josh Boyer
  • [PATCH] ibm_emac: Remove the ibm_emac driver   Eugene Surovegin
  • [PATCH] ibm_emac: Remove the ibm_emac driver   Jeff Garzik
  • Question regarding mpic_assign_isu() in storcenter.c   Eric Witcher
    • Question regarding mpic_assign_isu() in storcenter.c   Jon Loeliger
      • Question regarding mpic_assign_isu() in storcenter.c   Kumar Gala
• powerpc: Add cputable entry for POWER7   Michael Neuling
  • powerpc: Add cputable entry for POWER7   Joel Schopp
• [PATCH 0/9] powerpc: Add kernel support for POWER7 VSX.   Michael Neuling
  • [PATCH 1/9] powerpc: Fix msr setting in 32 bit signal code   Michael Neuling
    • [PATCH 1/9] powerpc: Fix msr setting in 32 bit signal code   Kumar Gala
    • [PATCH 1/9] powerpc: Fix msr setting in 32 bit signal code   Michael Neuling
  • [PATCH 2/9] powerpc: Add macros to access floating point registers in thread_struct.   Michael Neuling
  • [PATCH 3/9] powerpc: Move altivec_unavailable   Michael Neuling
  • [PATCH 4/9] powerpc: Make load_up_fpu and load_up_altivec callable   Michael Neuling
  • [PATCH 5/9] powerpc: Introduce VSX thread_struct and CONFIG_VSX   Michael Neuling
    • [PATCH 5/9] powerpc: Introduce VSX thread_struct and CONFIG_VSX   Kumar Gala
    • [PATCH 5/9] powerpc: Introduce VSX thread_struct and CONFIG_VSX   Paul Mackerras
    • [PATCH 5/9] powerpc: Introduce VSX thread_struct and CONFIG_VSX   Kumar Gala
    • [PATCH 5/9] powerpc: Introduce VSX thread_struct and CONFIG_VSX   Michael Neuling
    • [PATCH 5/9] powerpc: Introduce VSX thread_struct and CONFIG_VSX   Kumar Gala
    • [PATCH 5/9] powerpc: Introduce VSX thread_struct and CONFIG_VSX   Michael Neuling
    • [PATCH 5/9] powerpc: Introduce VSX thread_struct and CONFIG_VSX   Kumar Gala
    • [PATCH 5/9] powerpc: Introduce VSX thread_struct and CONFIG_VSX   Michael Neuling
    • [PATCH 5/9] powerpc: Introduce VSX thread_struct and CONFIG_VSX   Kumar Gala
    • [PATCH 5/9] powerpc: Introduce VSX thread_struct and CONFIG_VSX   Michael Neuling
    • [PATCH 5/9] powerpc: Introduce VSX thread_struct and CONFIG_VSX   Kumar Gala
    • [PATCH 5/9] powerpc: Introduce VSX thread_struct and CONFIG_VSX   Benjamin Herrenschmidt
    • [PATCH 5/9] powerpc: Introduce VSX thread_struct and CONFIG_VSX   Kumar Gala
  • [PATCH 6/9] powerpc: Add VSX CPU feature   Michael Neuling
    • [PATCH 6/9] powerpc: Add VSX CPU feature   Joel Schopp
    • [PATCH 6/9] powerpc: Add VSX CPU feature   David Woodhouse
      • [PATCH 6/9] powerpc: Add VSX CPU feature   Michael Neuling
  • [PATCH 7/9] powerpc: Add VSX assembler code macros   Michael Neuling
  • [PATCH 8/9] powerpc: Add VSX context save/restore, ptrace and signal support   Michael Neuling
  • [PATCH 9/9] powerpc: Add CONFIG_VSX config option   Michael Neuling
    • [PATCH 0/9] powerpc: Add kernel support for POWER7 VSX.   Kumar Gala
    • [PATCH 0/9] powerpc: Add kernel support for POWER7 VSX.   Michael Neuling
  • [PATCH 0/9] powerpc: Add kernel support for POWER7 VSX.   Michael Neuling
    • [PATCH 1/9] powerpc: Fix msr setting in 32 bit signal code   Michael Neuling
      • [PATCH 1/9] powerpc: Fix msr setting in 32 bit signal code   Kumar Gala
    • [PATCH 2/9] powerpc: Add macros to access floating point registers in thread_struct.   Michael Neuling
      • [PATCH 2/9] powerpc: Add macros to access floating point registers in thread_struct.   Kumar Gala
      • [PATCH 2/9] powerpc: Add macros to access floating point registers in thread_struct.   Michael Neuling
    • [PATCH 3/9] powerpc: Move altivec_unavailable   Michael Neuling
    • [PATCH 4/9] powerpc: Make load_up_fpu and load_up_altivec callable   Michael Neuling
    • [PATCH 5/9] powerpc: Introduce VSX thread_struct and CONFIG_VSX   Michael Neuling
      • [PATCH 5/9] powerpc: Introduce VSX thread_struct and CONFIG_VSX   Kumar Gala
    • [PATCH 6/9] powerpc: Add VSX CPU feature   Michael Neuling
    • [PATCH 7/9] powerpc: Add VSX assembler code macros   Michael Neuling
    • [PATCH 8/9] powerpc: Add VSX context save/restore, ptrace and signal support   Michael Neuling
    • [PATCH 9/9] powerpc: Add CONFIG_VSX config option   Michael Neuling
      • [PATCH 0/9] powerpc: Add kernel support for POWER7 VSX.   Kumar Gala
      • [PATCH 0/9] powerpc: Add kernel support for POWER7 VSX.   Michael Neuling
    • [PATCH 0/9] powerpc: Add kernel support for POWER7 VSX.   Michael Neuling
      • [PATCH 2/9] powerpc: Add macros to access floating point registers in thread_struct.   Michael Neuling
      • [PATCH 6/9] powerpc: Add VSX CPU feature   Michael Neuling
      • [PATCH 7/9] powerpc: Add VSX assembler code macros   Michael Neuling
      • [PATCH 8/9] powerpc: Add VSX context save/restore, ptrace and signal support   Michael Neuling
      • [PATCH 9/9] powerpc: Add CONFIG_VSX config option   Michael Neuling
      • [PATCH 0/9] powerpc: Add kernel support for POWER7 VSX.   Michael Neuling
      • [PATCH 2/9] powerpc: Add macros to access floating point registers in thread_struct.   Michael Neuling
      • [PATCH 3/9] powerpc: Move altivec_unavailable   Michael Neuling
      • [PATCH 4/9] powerpc: Make load_up_fpu and load_up_altivec callable   Michael Neuling
      • [PATCH 5/9] powerpc: Introduce VSX thread_struct and CONFIG_VSX   Michael Neuling
      • [PATCH 6/9] powerpc: Add VSX CPU feature   Michael Neuling
      • [PATCH 7/9] powerpc: Add VSX assembler code macros   Michael Neuling
      • [PATCH 8/9] powerpc: Add VSX context save/restore, ptrace and signal support   Michael Neuling
      • [PATCH 9/9] powerpc: Add CONFIG_VSX config option   Michael Neuling
      • [PATCH 0/9] powerpc: Add kernel support for POWER7 VSX.   Michael Neuling
      • [PATCH 1/9] powerpc: Fix msr setting in 32 bit signal code   Michael Neuling
      • [PATCH 1/9] powerpc: Fix msr setting in 32 bit signal code   Kumar Gala
      • [PATCH 2/9] powerpc: Add macros to access floating point registers in thread_struct.   Michael Neuling
      • [PATCH 2/9] powerpc: Add macros to access floating point registers in thread_struct.   Kumar Gala
      • [PATCH 2/9] powerpc: Add macros to access floating point registers in thread_struct.   Segher Boessenkool
      • [PATCH 2/9] powerpc: Add macros to access floating point registers in thread_struct.   Michael Neuling
      • [PATCH 3/9] powerpc: Move altivec_unavailable   Michael Neuling
      • [PATCH 4/9] powerpc: Make load_up_fpu and load_up_altivec callable   Michael Neuling
      • [PATCH 4/9] powerpc: Make load_up_fpu and load_up_altivec callable   Kumar Gala
      • [PATCH 5/9] powerpc: Introduce VSX thread_struct and CONFIG_VSX   Michael Neuling
      • [PATCH 6/9] powerpc: Add VSX CPU feature   Michael Neuling
      • [PATCH 6/9] powerpc: Add VSX CPU feature   Kumar Gala
      • [PATCH 7/9] powerpc: Add VSX assembler code macros   Michael Neuling
      • [PATCH 7/9] powerpc: Add VSX assembler code macros   Kumar Gala
      • [PATCH 7/9] powerpc: Add VSX assembler code macros   Michael Neuling
      • [PATCH 7/9] powerpc: Add VSX assembler code macros   Kumar Gala
      • [PATCH 8/9] powerpc: Add VSX context save/restore, ptrace and signal support   Michael Neuling
      • [PATCH 9/9] powerpc: Add CONFIG_VSX config option   Michael Neuling
      • [PATCH 9/9] powerpc: Add CONFIG_VSX config option   Kumar Gala
      • [PATCH 0/9] powerpc: Add kernel support for POWER7 VSX.   Michael Neuling
      • [PATCH 1/9] powerpc: Fix msr setting in 32 bit signal code   Michael Neuling
      • [PATCH 2/9] powerpc: Add macros to access floating point registers in thread_struct.   Michael Neuling
      • [PATCH 2/9] powerpc: Add macros to access floating point registers in thread_struct.   Kumar Gala
      • [PATCH 2/9] powerpc: Add macros to access floating point registers in thread_struct.   Scott Wood
      • [PATCH 2/9] powerpc: Add macros to access floating point registers in thread_struct.   Gabriel Paubert
      • [PATCH 2/9] powerpc: Add macros to access floating point registers in thread_struct.   Andreas Schwab
      • [PATCH 3/9] powerpc: Move altivec_unavailable   Michael Neuling
      • [PATCH 4/9] powerpc: Make load_up_fpu and load_up_altivec callable   Michael Neuling
      • [PATCH 5/9] powerpc: Introduce VSX thread_struct and CONFIG_VSX   Michael Neuling
      • [PATCH 6/9] powerpc: Add VSX CPU feature   Michael Neuling
      • [PATCH 7/9] powerpc: Add VSX assembler code macros   Michael Neuling
      • [PATCH 8/9] powerpc: Add VSX context save/restore, ptrace and signal support   Michael Neuling
      • [PATCH 9/9] powerpc: Add CONFIG_VSX config option   Michael Neuling
• [PATCH] powerpc: Only demote individual slices rather than whole process   Paul Mackerras
  • [PATCH] powerpc: Only demote individual slices rather than whole process   Benjamin Herrenschmidt
• [BUILD-FAILURE] linux-next: Tree for June 17 - powerpc build fails with !CONFIG_BUG   Kamalesh Babulal
• [RFC PATCH] Keep 3 high personality bytes across exec   Eric B Munson
  • [RFC PATCH V2] Keep 3 high personality bytes across exec   Eric B Munson
• [RFC PATCH] Keep 3 high personality bytes across exec   Paul Mackerras
• [POWERPC] Clear sub-page HPTE present bits when demoting page size   Paul Mackerras
  • [POWERPC] Clear sub-page HPTE present bits when demoting page size   Benjamin Herrenschmidt
• [PATCH] Power5,Power6 BSR driver   Sonny Rao
• [PATCH 0/3] ALSA fixes for non-coherent ppc32   Takashi Iwai
  • [PATCH 1/3] ppc: Add dma_mmap_coherent() for PPC32   Takashi Iwai
  • [PATCH 2/3] ALSA: Fix mapping of DMA buffers   Takashi Iwai
  • [PATCH 3/3] ALSA: Fix SG-buffer DMA with non-coherent architectures   Takashi Iwai
• [git pull] Please pull powerpc.git merge branch   Paul Mackerras
• gen-mhs-devtree - C_ALL_PIMS_SHARE_ADDRESSES=0   Johann Baudy
  • gen-mhs-devtree - C_ALL_PIMS_SHARE_ADDRESSES=0   Stephen Neuendorffer
  • [PATCH] fs_enet: restore promiscuous and multicast settings in restart()   Laurent Pinchart
    • [PATCH] fs_enet: restore promiscuous and multicast settings in restart()   Matvejchikov Ilya
      • [PATCH] fs_enet: restore promiscuous and multicast settings in restart()   Vitaly Bordug
      • [PATCH] fs_enet: restore promiscuous and multicast settings in restart()   Jon Loeliger
      • [PATCH] fs_enet: restore promiscuous and multicast settings in restart()   Olof Johansson
      • [PATCH] fs_enet: restore promiscuous and multicast settings in restart()   Matvejchikov Ilya
    • [PATCH] fs_enet: restore promiscuous and multicast settings in restart()   Bill Fink
      • [PATCH] fs_enet: restore promiscuous and multicast settings in restart()   Laurent Pinchart
      • [PATCH] fs_enet: restore promiscuous and multicast settings in restart()   Matvejchikov Ilya
      • [PATCH] fs_enet: restore promiscuous and multicast settings in restart()   Laurent Pinchart
      • [PATCH] fs_enet: restore promiscuous and multicast settings in restart()   Bill Fink
      • [PATCH 0/2][Rev4] Add MPC5121 FEC suppport   John Rigby
      • [PATCH 1/2][Rev4] fs_enet: change fec_t to struct fec   John Rigby
      • [PATCH 2/2][Rev4] fs_enet: add MPC5121 FEC support   John Rigby
      • [PATCH 2/2][Rev4] fs_enet: add MPC5121 FEC support   Scott Wood
      • [PATCH 1/2][Rev4] fs_enet: change fec_t to struct fec   Stephen Rothwell
  • [RFC] cpm2: Rework baud rate generators configuration to support external clocks.   Laurent Pinchart
• mpc5121 cache coherency   Kenneth Johansson
• [U-Boot-Users] mpc5121 cache coherency   John Rigby
  • [U-Boot-Users] mpc5121 cache coherency   kenneth johansson
• [PATCH 0/2] more power7 bits   jschopp at austin.ibm.com
  • [PATCH 1/2] Power7 architected entry   jschopp at austin.ibm.com
    • [PATCH 1/2] Power7 architected entry   Olof Johansson
    • [PATCH 1/2] Power7 architected entry   Joel Schopp
  • [PATCH 2/2] 2.06 architecture-vec   jschopp at austin.ibm.com
    • [PATCH 2/2][Rev4][Resend] fs_enet: add MPC5121 FEC support   John Rigby
• [Resend][PATCH 1/8][Version 2] MPC5121 Update MPC5121ADS device tree   John Rigby
  • [Resend][PATCH 1/8][Version 2] MPC5121 Update MPC5121ADS device tree   Arnd Bergmann
  • [Resend][PATCH 1/8][Version 2] MPC5121 Update MPC5121ADS device tree   David Gibson
    • [Resend][PATCH 1/8][Version 2] MPC5121 Update MPC5121ADS device tree   John Rigby
      • [Resend][PATCH 1/8][Version 2] MPC5121 Update MPC5121ADS device tree   Arnd Bergmann
      • [Resend][PATCH 1/8][Version 2] MPC5121 Update MPC5121ADS device tree   Grant Likely
      • [Resend][PATCH 1/8][Version 2] MPC5121 Update MPC5121ADS device tree   Grant Likely
  • [Resend][PATCH 1/8][Version 2] MPC5121 Update MPC5121ADS device tree   Grant Likely
  • 44x defconfig directory   John Linn
    • 44x defconfig directory   Sean MacLennan
      • 44x defconfig directory   Kumar Gala
• kgdb issues for ppc target   SEEMA pm
• [patch 0/6] Strong Access Ordering page attributes for POWER7   shaggy at linux.vnet.ibm.com
  • [patch 2/6] powerpc: hash_huge_page() should get the WIMG bits from the lpte   shaggy at linux.vnet.ibm.com
  • [patch 3/6] powerpc: Define flags for Strong Access Ordering   shaggy at linux.vnet.ibm.com
  • [patch 4/6] powerpc: Add SAO Feature bit to the cputable   shaggy at linux.vnet.ibm.com
  • [patch 5/6] powerpc: Add Strong Access Ordering   shaggy at linux.vnet.ibm.com
  • [patch 6/6] powerpc: Dont clear _PAGE_COHERENT when _PAGE_SAO is set   shaggy at linux.vnet.ibm.com
• [patch 1/6] mm: Allow architectures to define additional protection bits   shaggy at linux.vnet.ibm.com
  • [RFC/PATCH 0/3] sched: allow arch override of cpu power   Nathan Lynch
  • [RFC/PATCH 1/3] sched: support arch override of sched_group cpu power   Nathan Lynch
  • [RFC/PATCH 2/3] add cpu_power to machdep_calls, override SD_SIBLING_INIT   Nathan Lynch
  • [RFC/PATCH 3/3] adjust cpu power for secondary threads on POWER6   Nathan Lynch
  • [RFC/PATCH 3/3] adjust cpu power for secondary threads on POWER6   Olof Johansson
  • [RFC/PATCH 3/3] adjust cpu power for secondary threads on POWER6   Olof Johansson
  • [RFC/PATCH 0/3] sched: allow arch override of cpu power   Ingo Molnar
  • [RFC/PATCH 0/3] sched: allow arch override of cpu power   Nathan Lynch
  • [RFC/PATCH 0/3] sched: allow arch override of cpu power   Breno Leitao
  • [RFC/PATCH 0/3] sched: allow arch override of cpu power   Nathan Lynch
  • [PATCH 1/6] Move code patching code into arch/powerpc/lib/code-patching.c   Kumar Gala
  • [PATCH 1/6] Move code patching code into arch/powerpc/lib/code-patching.c   Michael Ellerman
  • [PATCH 1/6] Move code patching code into arch/powerpc/lib/code-patching.c   Kumar Gala
• [RFC 0/3] powerpc: memory copy routines tweaked for Cell   Mark Nelson
  • [RFC 0/3] powerpc: memory copy routines tweaked for Cell   Arnd Bergmann
    • [RFC 0/3] powerpc: memory copy routines tweaked for Cell   Paul Mackerras
      • [RFC 0/3] powerpc: memory copy routines tweaked for Cell   Arnd Bergmann
      • [RFC 0/3] powerpc: memory copy routines tweaked for Cell   Olof Johansson
      • [RFC 0/3] powerpc: memory copy routines tweaked for Cell   Mark Nelson
      • [RFC 0/3] powerpc: memory copy routines tweaked for Cell   Gunnar von Boehn
      • [RFC 0/3] powerpc: memory copy routines tweaked for Cell   Paul Mackerras
      • [RFC 0/3] powerpc: memory copy routines tweaked for Cell   Gunnar von Boehn
    • [RFC 0/3] powerpc: memory copy routines tweaked for Cell   Mark Nelson
      • [RFC 0/3] powerpc: memory copy routines tweaked for Cell   Mark Nelson
• [RFC 1/3] powerpc: __copy_tofrom_user tweaked for Cell   Mark Nelson
  • [RFC 1/3] powerpc: __copy_tofrom_user tweaked for Cell   Arnd Bergmann
    • [RFC 1/3] powerpc: __copy_tofrom_user tweaked for Cell   Gunnar von Boehn
    • [RFC 1/3] powerpc: __copy_tofrom_user tweaked for Cell   Sanjay Patel
    • [RFC 1/3] powerpc: __copy_tofrom_user tweaked for Cell   Gunnar von Boehn
    • [RFC 1/3] powerpc: __copy_tofrom_user tweaked for Cell   Sanjay Patel
    • [RFC 1/3] powerpc: __copy_tofrom_user tweaked for Cell   Benjamin Herrenschmidt
    • [RFC 1/3] powerpc: __copy_tofrom_user tweaked for Cell   Sanjay Patel
    • [RFC 1/3] powerpc: __copy_tofrom_user tweaked for Cell   Gunnar von Boehn
    • [RFC 1/3] powerpc: __copy_tofrom_user tweaked for Cell   Geert Uytterhoeven
    • [RFC 1/3] powerpc: __copy_tofrom_user tweaked for Cell   Paul Mackerras
    • [RFC 1/3] powerpc: __copy_tofrom_user tweaked for Cell   Gunnar von Boehn
    • [Cbe-oss-dev] [RFC 1/3] powerpc: __copy_tofrom_user tweaked for Cell   Paul Mackerras
    • [Cbe-oss-dev] [RFC 1/3] powerpc: __copy_tofrom_user tweaked for Cell   Gunnar von Boehn
    • [Cbe-oss-dev] [RFC 1/3] powerpc: __copy_tofrom_user tweaked for Cell   Arnd Bergmann
    • [Cbe-oss-dev] [RFC 1/3] powerpc: __copy_tofrom_user tweaked for Cell   Paul Mackerras
    • [Cbe-oss-dev] [RFC 1/3] powerpc: __copy_tofrom_user tweaked for Cell   David Miller
    • [Cbe-oss-dev] [RFC 1/3] powerpc: __copy_tofrom_user tweaked for Cell   Arnd Bergmann
    • [RFC 1/3] powerpc: __copy_tofrom_user tweaked for Cell   Mark Nelson
• [RFC 2/3] powerpc: memcpy tweaked for Cell   Mark Nelson
• [RFC 3/3] powerpc: copy_4K_page tweaked for Cell   Mark Nelson
  • [Cbe-oss-dev] [RFC 3/3] powerpc: copy_4K_page tweaked for Cell   Arnd Bergmann
    • [Cbe-oss-dev] [RFC 3/3] powerpc: copy_4K_page tweaked for Cell   Mark Nelson
• [OOPS] RT kernel on PowerPC   Chirag Jog
  • [OOPS] RT kernel on PowerPC   Sebastien Dugue
• [PATCH] powerpc/85xx: add DOZE/NAP support for e500 core   Kumar Gala
• [PATCH] powerpc/e500mc: flush L2 on NAP for e500mc   Kumar Gala
  • DTC 1.2.0-rc1 Tagged   Jon Loeliger
• cell: add support for power button of future IBM cell blades   Christian Krafft
• Please pull 'next' branch of 4xx tree   Josh Boyer
• [PATCH] CPM2 i2c driver   Esben Haabendal
  • [PATCH] CPM2 i2c driver   Wolfram Sang
    • [PATCH] fix mpc83xx spi prescale modulus calculate   Chen Gong
    • [PATCH] fix mpc83xx spi prescale modulus calculate   Li Yang
    • [PATCH] fix mpc83xx spi prescale modulus calculate   Anton Vorontsov
    • [PATCH] fix mpc83xx spi prescale modulus calculate   Kumar Gala
• [RFC] Kprobes for book-e   Sulibhavi, Madhvesh
• [PATCH] powerpc: Move common module code into its own file   Kumar Gala
• [PATCH][WIP][RFC] powerpc: fixup lwsync at runtime   Kumar Gala
  • [PATCH][WIP][RFC] powerpc: fixup lwsync at runtime   Benjamin Herrenschmidt
    • [PATCH][WIP][RFC] powerpc: fixup lwsync at runtime   Kumar Gala
    • [PATCH][WIP][RFC] powerpc: fixup lwsync at runtime   Benjamin Herrenschmidt
    • [PATCH][WIP][RFC] powerpc: fixup lwsync at runtime   Kumar Gala
  • [PATCH][WIP][RFC] powerpc: fixup lwsync at runtime   Michael Ellerman
    • [PATCH 0/6] MPC5121 Updates   John Rigby
    • [PATCH 2/6] MPC5121 clock driver   John Rigby
    • [PATCH 2/6] MPC5121 clock driver   Stephen Rothwell
    • [PATCH 2/6] MPC5121 clock driver   Grant Likely
    • [PATCH 3/6] MPC5121 Add generic board support   John Rigby
    • [PATCH 4/6] MPC5121 Add MPC5121ADS cpld support   John Rigby
    • [PATCH 5/6] MPC5121 Add PCI support   John Rigby
    • [PATCH 5/6] MPC5121 Add PCI support   Kumar Gala
    • [PATCH 5/6] MPC5121 Add PCI support   Scott Wood
    • [PATCH 5/6] MPC5121 Add PCI support   Grant Likely
    • [PATCH 5/6] MPC5121 Add PCI support   John Rigby
    • [PATCH 4/6] MPC5121 Add MPC5121ADS cpld support   Grant Likely
    • [PATCH 4/6] MPC5121 Add MPC5121ADS cpld support   John Rigby
    • [PATCH 3/6] MPC5121 Add generic board support   Grant Likely
    • [PATCH 6/6] MPC5121 Hide pci bridge   John Rigby
    • [PATCH 6/6] MPC5121 Hide pci bridge   Grant Likely
• [RFC] 4xx hardware watchpoint support   Luis Machado
• [PATCH 0/5] Updates for memory dlpar and dynamic reconfiguration memory   Nathan Fontenot
  • [PATCH 1/5] Allow drc indexes to be specified in formats other than decimal   Nathan Fontenot
    • [PATCH 1/5] Allow drc indexes to be specified in formats other than decimal   Sergei Shtylyov
      • [PATCH 1/5] Allow drc indexes to be specified in formats other than decimal   Nathan Fontenot
  • [PATCH 2/5] Use the base address of lmbs instead of drc index for dlpar   Nathan Fontenot
  • [PATCH 3/5] Update device tree correctly for drconf memory add/remove   Nathan Fontenot
  • [PATCH 4/5] Helper routines for parsing drconf memory   Nathan Fontenot
    • [PATCH 4/5] Helper routines for parsing drconf memory   Paul Mackerras
  • [PATCH 5/5] Add ability to associate drconf memory sections in hotplug memory add   Nathan Fontenot
• [PATCH 1/9] powerpc: Fix msr setting in 32 bit signal code   Michael Neuling
• [PATCH 3/9] powerpc: Move altivec_unavailable   Michael Neuling
• [PATCH 4/9] powerpc: Make load_up_fpu and load_up_altivec callable   Michael Neuling
• [PATCH 5/9] powerpc: Introduce VSX thread_struct and CONFIG_VSX   Michael Neuling
• [PATCH 1/9] powerpc: Fix msr setting in 32 bit signal code   Michael Neuling
  • [PATCH 1/9] powerpc: Fix msr setting in 32 bit signal code   Kumar Gala
• [PATCH 1/1] Change the default link address for pSeries zImage kernels.   Tony Breeds
  • [PATCH 1/1] Change the default link address for pSeries zImage kernels.   Tony Breeds
  • [PATCH 1/1] Change the default link address for pSeries zImage kernels.   Adrian Reber
    • [PATCH 1/1] Change the default link address for pSeries zImage kernels.   Benjamin Herrenschmidt
  • [PATCH 1/1] Change the default link address for pSeries zImage kernels.   Michael Ellerman
  • [PATCH v2] Change the default link address for pSeries zImage kernels.   Tony Breeds
• starting with 2.6.26-rc1 cell_defconfig fails on QS22   Adrian Reber
  • starting with 2.6.26-rc1 cell_defconfig fails on QS22   Benjamin Herrenschmidt
    • starting with 2.6.26-rc1 cell_defconfig fails on QS22   Segher Boessenkool
  • starting with 2.6.26-rc1 cell_defconfig fails on QS22   Jeremy Kerr
    • starting with 2.6.26-rc1 cell_defconfig fails on QS22   Adrian Reber
      • starting with 2.6.26-rc1 cell_defconfig fails on QS22   Segher Boessenkool
      • starting with 2.6.26-rc1 cell_defconfig fails on QS22   Adrian Reber
  • rh_init exported twice (rheap vs. dm-region_hash)   Matt Sealey
    • rh_init exported twice (rheap vs. dm-region_hash)   Timur Tabi
• a question of mpc8313, maybe simple   jumpingProgrammer
  • a question of mpc8313, maybe simple   Scott Wood
    • a question of mpc8313, maybe simple   jumpingProgrammer
      • a question of mpc8313, maybe simple   Scott Wood
      • [PATCH] ibm_newemac: Fixes kernel crashes when speed of cable connected changes   Stefan Roese
      • [PATCH] ibm_newemac: Fixes kernel crashes when speed of cable connected changes   Benjamin Herrenschmidt
      • [PATCH] ibm_newemac: Fixes kernel crashes when speed of cable connected changes   SathyaNarayanan
      • [PATCH] ibm_newemac: Fixes kernel crashes when speed of cable connected changes   Benjamin Herrenschmidt
      • [PATCH] ibm_newemac: Fixes entry of short packets   Stefan Roese
      • [PATCH] ibm_newemac: Fixes entry of short packets   Benjamin Herrenschmidt
      • [PATCH] ibm_newemac: Fixes entry of short packets   SathyaNarayanan
      • [PATCH] ibm_newemac: Fixes entry of short packets   Benjamin Herrenschmidt
      • [PATCH] ibm_newemac: Fixes memory leak in ibm_newemac ethernet driver   Stefan Roese
      • [PATCH] ibm_newemac: Fixes memory leak in ibm_newemac ethernet driver   Benjamin Herrenschmidt
• Virqs of cascaded interrupt controller.   Welch, Martyn (GE EntSol, Intelligent Platforms)
  • Virqs of cascaded interrupt controller.   Scott Wood
  • [PATCH] [RFC] powerpc: Xilinx: adding virtex5 powerpc 440 support   John Linn
    • [PATCH] [RFC] powerpc: Xilinx: adding virtex5 powerpc 440 support   Josh Boyer
      • [PATCH] [RFC] powerpc: Xilinx: adding virtex5 powerpc 440 support   John Linn
      • [PATCH] [RFC] powerpc: Xilinx: adding virtex5 powerpc 440 support   Josh Boyer
      • [PATCH] [RFC] powerpc: Xilinx: adding virtex5 powerpc 440 support   John Linn
      • [PATCH] [RFC] powerpc: Xilinx: adding virtex5 powerpc 440 support   Grant Likely
      • [PATCH] [RFC] powerpc: Xilinx: adding virtex5 powerpc 440 support   Grant Likely
      • [PATCH] [RFC] powerpc: Xilinx: adding virtex5 powerpc 440 support   Peter Korsgaard
      • [PATCH] [RFC] powerpc: Xilinx: adding virtex5 powerpc 440 support   John Linn
      • [PATCH] [RFC] powerpc: Xilinx: adding virtex5 powerpc 440 support   Peter Korsgaard
      • [PATCH] [RFC] powerpc: Xilinx: adding virtex5 powerpc 440 support   John Linn
• [2.6 patch] asm/ptrace.h userspace headers cleanup   Adrian Bunk
  • [2.6 patch] asm/ptrace.h userspace headers cleanup   Roland McGrath
  • [2.6 patch] asm/ptrace.h userspace headers cleanup   Greg Ungerer
    • [2.6 patch] asm/ptrace.h userspace headers cleanup   Paul Mundt
  • [2.6 patch] asm/ptrace.h userspace headers cleanup   Grant Grundler
  • [2.6 patch] asm/ptrace.h userspace headers cleanup   Jesper Nilsson
  • [2.6 patch] asm/ptrace.h userspace headers cleanup   Chris Zankel
  • [2.6 patch] asm/ptrace.h userspace headers cleanup   David Howells
  • [2.6 patch] asm/ptrace.h userspace headers cleanup   Paul Mackerras
  • [2.6 patch] asm/ptrace.h userspace headers cleanup   Russell King
• [RFC: 2.6 patch] powerpc: don't export asm/asm-compat.h to userspace   Adrian Bunk
• [RFC: 2.6 patch] powerpc: asm/elf.h: reduce userspace header   Adrian Bunk
• [PATCH] drivers/macintosh/smu.c: improve error handling   Julia Lawall
  • [PATCH V2] ibm_newemac: Fixes kernel crashes when speed of cable connected changes   Stefan Roese
  • [PATCH V2] ibm_newemac: Fixes kernel crashes when speed of cable connected changes   Jeff Garzik
  • [PATCH] [RFC] powerpc: Xilinx: adding virtex5 powerpc 440 support   Stephen Neuendorffer
• dtc: Testcase for /include/ directive   David Gibson
• [PATCH 01/14] powerpc: Move code patching code into arch/powerpc/lib/code-patching.c   Michael Ellerman
  • [PATCH 02/14] powerpc: Allow create_branch() to return errors   Michael Ellerman
    • [PATCH 02/14] powerpc: Allow create_branch() to return errors   Kumar Gala
    • [PATCH 02/14] powerpc: Allow create_branch() to return errors   Jon Loeliger
  • [PATCH 03/14] powerpc: Make create_branch() return errors if the branch target is too large   Michael Ellerman
    • [PATCH 03/14] powerpc: Make create_branch() return errors if the branch target is too large   Kumar Gala
  • [PATCH 04/14] powerpc: Add ppc_function_entry() which gets the entry point for a function   Michael Ellerman
    • [PATCH 04/14] powerpc: Add ppc_function_entry() which gets the entry point for a function   Kumar Gala
  • [PATCH 05/14] powerpc: Add new code patching routines   Michael Ellerman
    • [PATCH 05/14] powerpc: Add new code patching routines   Kumar Gala
    • [PATCH 05/14] powerpc: Add new code patching routines   Michael Ellerman
  • [PATCH 06/14] powerpc: Add tests of the code patching routines   Michael Ellerman
    • [PATCH 06/14] powerpc: Add tests of the code patching routines   Kumar Gala
  • [PATCH 07/14] powerpc: Add PPC_NOP_INSTR, a hash define for the preferred nop instruction   Michael Ellerman
    • [PATCH 07/14] powerpc: Add PPC_NOP_INSTR, a hash define for the preferred nop instruction   Kumar Gala
  • [PATCH 08/14] powerpc: Split out do_feature_fixups() from cputable.c   Michael Ellerman
    • [PATCH 08/14] powerpc: Split out do_feature_fixups() from cputable.c   Kumar Gala
  • [PATCH 09/14] powerpc: Consolidate CPU and firmware feature fixup macros   Michael Ellerman
    • [PATCH 09/14] powerpc: Consolidate CPU and firmware feature fixup macros   Kumar Gala
  • [PATCH 10/14] powerpc: Consolidate feature fixup macros for 64/32 bit   Michael Ellerman
    • [PATCH 10/14] powerpc: Consolidate feature fixup macros for 64/32 bit   Kumar Gala
    • [PATCH 10/14] powerpc: Consolidate feature fixup macros for 64/32 bit   Michael Ellerman
  • [PATCH 11/14] powerpc: Introduce infrastructure for feature sections with alternatives   Michael Ellerman
  • [PATCH 12/14] powerpc: Add logic to patch alternative feature sections   Michael Ellerman
    • [PATCH 12/14] powerpc: Add logic to patch alternative feature sections   Kumar Gala
    • [PATCH 12/14] powerpc: Add logic to patch alternative feature sections   Michael Ellerman
  • [PATCH 13/14] powerpc: Add self-tests of the feature fixup code   Michael Ellerman
  • [PATCH 14/14] powerpc: Use an alternative feature section in entry_64.S   Michael Ellerman
    • [PATCH 01/14] powerpc: Move code patching code into arch/powerpc/lib/code-patching.c   Kumar Gala
• [PATCH 6/6] powerpc: support multiple huge page sizes   Nick Piggin
  • [PATCH 6/6] powerpc: support multiple huge page sizes   Jon Tollefson
• [PATCH 7/14] arch/powerpc: Eliminate NULL test and memset after alloc_bootmem   Julia Lawall
  • [PATCH] fsl-diu-fb: Update Freescale DIU driver to use page_alloc_exact()   Timur Tabi
  • Graphic Card on Freescale MPC837x-rdb   Bizhan Gholikhamseh (bgholikh)
    • Graphic Card on Freescale MPC837x-rdb   Kumar Gala
    • Graphic Card on Freescale MPC837x-rdb   Benjamin Herrenschmidt
    • Graphic Card on Freescale MPC837x-rdb   Anatolij Gustschin
• [PATCH/RFC] Document Freescale power management nodes, and the sleep property.   Scott Wood
• [PATCH v2] Document Freescale power management nodes, and the sleep property.   Scott Wood
  • Exit points for returning from kernel mode to user mode   Mitesh
    • Exit points for returning from kernel mode to user mode   Benjamin Herrenschmidt
      • [PATCH] powerpc: fix ALSA options in Freescale 85xx and 86xx defconfigs   Timur Tabi
      • [PATCH 0/8][Version 2] MPC5121 Updates   John Rigby
      • [PATCH 2/8][Version 2] MPC5121 clock driver   John Rigby
      • [PATCH 2/8][Version 2] MPC5121 clock driver   David Jander
      • [PATCH 3/8][Version 2] MPC5121 Add generic board support   John Rigby
      • [PATCH 4/8][Version 2] MPC5121 Add MPC5121ADS cpld support   John Rigby
      • [PATCH 5/8][Version 2] powerpc: pci config cleanup   John Rigby
      • [PATCH 6/8][Version 2] powerpc: Move mpc83xx_add_bridge to fsl_pci.c   John Rigby
      • [PATCH 6/8][Version 2] powerpc: Move mpc83xx_add_bridge to fsl_pci.c   Kumar Gala
      • [PATCH 3/8][Version 2] MPC5121 Add generic board support   Grant Likely
      • [PATCH 7/8][Version 2] MPC5121 Add PCI support   John Rigby
      • [PATCH 8/8][Version 2] MPC5121 Hide pci bridge   John Rigby
      • [PATCH 8/8][Version 2] MPC5121 Hide pci bridge   Sergei Shtylyov
      • [PATCH v2] powerpc: fix ALSA options in Freescale 85xx and 86xx defconfigs   Timur Tabi
      • [PATCH] powerpc: remove CS4270 i2c data from fsl_soc.c   Timur Tabi
• Do we still need devtree_lock?   Timur Tabi
  • Do we still need devtree_lock?   Michael Ellerman
    • Do we still need devtree_lock?   Stephen Rothwell
      • [PATCH] Parameterize EMAC Multicast Match Handling   Grant Erickson
      • [PATCH v2] Parameterize EMAC Multicast Match Handling   Grant Erickson
• dtc: Use stdint.h types throughout dtc   David Gibson
• dtc: Use the same endian-conversion functions as libfdt   David Gibson
  • 2.6.26-rc6 kernel bug on PS3?   Stefan Wald
    • [Cbe-oss-dev] 2.6.26-rc6 kernel bug on PS3?   Geoff Levand
    • [Cbe-oss-dev] 2.6.26-rc6 kernel bug on PS3?   Stefan Wald
    • [Cbe-oss-dev] 2.6.26-rc6 kernel bug on PS3?   Benjamin Herrenschmidt
    • [Cbe-oss-dev] 2.6.26-rc6 kernel bug on PS3?   Stefan Wald
    • [Cbe-oss-dev] 2.6.26-rc6 kernel bug on PS3?   Jeremy Kerr
    • [Cbe-oss-dev] 2.6.26-rc6 kernel bug on PS3?   Arnd Bergmann
• [PATCH 2/9] powerpc: Add macros to access floating point registers in thread_struct.   Scott Wood
  • [PATCH 2/9] powerpc: Add macros to access floating point registers in thread_struct.   Kumar Gala
  • [PATCH 2/9] powerpc: Add macros to access floating point registers in thread_struct.   Michael Neuling
  • [PATCH] powerpc: Add macros to access floating point registers in thread_struct.   Michael Neuling
  • [PATCH 2/9] powerpc: Add macros to access floating point registers in thread_struct.   Gabriel Paubert
• [PATCH 1/2 v3] Document Freescale power management nodes, and the sleep property.   Scott Wood
  • [PATCH] powerpc: add of_find_next_property and of_get_aliased_index   Timur Tabi
  • [PATCH] powerpc: add of_find_next_property and of_get_aliased_index   Segher Boessenkool
  • [PATCH] powerpc: add of_find_next_property and of_get_aliased_index   Timur Tabi
  • [PATCH] powerpc: add of_find_next_property and of_get_aliased_index   Segher Boessenkool
  • [PATCH] powerpc: add of_find_next_property and of_get_aliased_index   Timur Tabi
  • [PATCH] powerpc: add of_find_next_property and of_get_aliased_index   Stefan Roese
  • [PATCH] powerpc: add of_find_next_property and of_get_aliased_index   Timur Tabi
  • [PATCH] powerpc: add of_find_next_property andof_get_aliased_index   Sean MacLennan
  • [PATCH] powerpc: add of_find_next_property andof_get_aliased_index   Timur Tabi
  • [PATCH] powerpc: add of_find_next_property andof_get_aliased_index   Stefan Roese
  • [PATCH] powerpc: add of_find_next_property andof_get_aliased_index   David Gibson
  • [PATCH] powerpc: add of_find_next_property and of_get_aliased_index   Josh Boyer
  • [PATCH] powerpc: add of_find_next_property and of_get_aliased_index   Benjamin Herrenschmidt
• [PATCH 00/18 v2] powerpc: pSeries Cooperative Memory Overcommitment support   Robert Jennings
  • [PATCH 01/18 v2] powerpc: Remove extraneous error reporting for hcall failures in lparcfg   Robert Jennings
  • [PATCH 02/18 v2] powerpc: Split processor entitlement retrieval and gathering to helper routines   Robert Jennings
  • [PATCH 03/18 v2] powerpc: Add memory entitlement capabilities to /proc/ppc64/lparcfg   Robert Jennings
  • [PATCH 04/18 v2] powerpc: Split retrieval of processor entitlement data into a helper routine   Robert Jennings
  • [PATCH 05/18 v2] powerpc: Enable CMO feature during platform setup   Robert Jennings
  • [PATCH 06/18 v2] powerpc: Utilities to set firmware page state   Robert Jennings
  • [PATCH 07/18 v2] powerpc: Add collaborative memory manager   Robert Jennings
  • [PATCH 08/18 v2] powerpc: Do not probe PCI buses or eBus devices if CMO is enabled   Robert Jennings
    • [PATCH 08/18 v2] powerpc: Do not probe PCI buses or eBus devices if CMO is enabled   Paul Mackerras
  • [PATCH 09/18 v2] powerpc: Add CMO paging statistics   Robert Jennings
  • [PATCH 10/18 v2] powerpc: iommu enablement for CMO   Robert Jennings
  • [PATCH 11/18 v2] powerpc: vio bus support for CMO   Robert Jennings
  • [PATCH 12/18 v2] powerpc: Verify CMO memory entitlement updates with virtual I/O   Robert Jennings
  • [PATCH 13/18 v2] powerpc: hvc enablement for CMO   Robert Jennings
  • [PATCH 14/18 v2] powerpc: hvcs enablement for CMO   Robert Jennings
  • [PATCH 15/18 v2] ibmveth: Automatically enable larger rx buffer pools for larger mtu   Robert Jennings
  • [PATCH 16/18 v2] ibmveth: enable driver for CMO   Robert Jennings
  • [PATCH 17/18 v2] ibmvscsi: driver enablement for CMO   Robert Jennings
  • [PATCH 18/18 v2] powerpc: Update arch vector to indicate support for CMO   Robert Jennings
    • [PATCH 0/2] powerpc: pci cleanup   John Rigby
    • [PATCH 1/2] powerpc: pci config cleanup   John Rigby
    • [PATCH 2/2] powerpc: Move mpc83xx_add_bridge to fsl_pci.c   John Rigby
    • [PATCH 1/2] powerpc: pci config cleanup   Benjamin Herrenschmidt
    • [PATCH 1/2] powerpc: pci config cleanup   Michael Ellerman
    • [PATCH 1/2] powerpc: pci config cleanup   John Rigby
• [PATCH] powerpc/bootwrapper: Add documentation of boot wrapper targets   Grant Likely
  • [PATCH] powerpc/bootwrapper: Add documentation of boot wrapper targets   Scott Wood
• [PATCH 1/3] mpc83xx: Power Management support   Scott Wood
  • [PATCH 1/3] mpc83xx: Power Management support   Kumar Gala
  • [PATCH 1/3] mpc83xx: Power Management support   Scott Wood
  • [PATCH 1/3] mpc83xx: Power Management support   Liu Dave
  • [PATCH 1/3] mpc83xx: Power Management support   Kumar Gala
• [PATCH 2/3] gianfar: Magic Packet and suspend/resume support.   Scott Wood
• [PATCH 3/3] mpc8313erdb: Add power management to the device tree.   Scott Wood
  • [PATCH 3/3] mpc8313erdb: Add power management to the device tree.   Kim Phillips
    • [PATCH 3/3] mpc8313erdb: Add power management to the device tree.   Kumar Gala
• dtc: Use libfdt endian conversion functions in libfdt   David Gibson
• dtc: Address an assortment of portability problems   David Gibson
  • dtc: Address an assortment of portability problems   Scott Wood
    • dtc: Address an assortment of portability problems   David Gibson
      • dtc: Address an assortment of portability problems   Scott Wood
      • dtc: Address an assortment of portability problems   David Gibson
• [PATCH] powerpc/bootwrapper: Add documentation of boot wrapper targets   Grant Likely
• [PATCH 1/2] powerpc/kprobes: Some minor fixes   Kumar Gala
• [PATCH 2/2] powerpc/booke: Add kprobes support for booke style processors   Kumar Gala
• dtc: Clean up lexing of include files   David Gibson
• Please pull from 'powerpc-next' branch   Kumar Gala
  • Please pull from 'powerpc-next' branch   Kumar Gala
  • Please pull from 'powerpc-next' branch   Paul Mackerras
  • Please pull from 'powerpc-next' branch   Kumar Gala
  • Please pull from 'powerpc-next' branch   Michael Ellerman
  • Please pull from 'powerpc-next' branch   Kumar Gala
• [PATCH 2/2] powerpc/booke: Add kprobes support for booke style processors   Sulibhavi, Madhvesh
• [PATCH] powerpc/bootwrapper: Pad .dtb by default   Kumar Gala
• [PATCH/RFC] powerpc: prevent memory corruption due to cache invalidation of unaligned DMA buffer   Andrew Lewis
  • [PATCH/RFC] powerpc: prevent memory corruption due to cache invalidation of unaligned DMA buffer   Gerhard Pircher
  • [PATCH/RFC] powerpc: prevent memory corruption due to cache invalidation of unaligned DMA buffer   Benjamin Herrenschmidt
  • [PATCHv2] fs_enet: restore promiscuous and multicast settings in restart()   Laurent Pinchart
    • [PATCHv2] fs_enet: restore promiscuous and multicast settings in restart()   Vitaly Bordug
      • [PATCH 1/1] powerpc: add 64 bit version of huge_ptep_set_wrprotect   Andy Whitcroft
      • [PATCH 1/1] powerpc: add 64 bit version of huge_ptep_set_wrprotect   Benjamin Herrenschmidt
• [PATCH] powerpc: Fix /dev/oldmem for kdump   Sachin P. Sant
  • [PATCH] powerpc: Modem control lines support for the cpm_uart driver   Laurent Pinchart
  • [RFC] cpm_uart: Fix break generation   Laurent Pinchart
  • [PATCH] cpm_uart: Support uart_wait_until_sent()   Laurent Pinchart
    • Microblaze init port v4   monstr at seznam.cz
    • Microblaze init port v4   Adrian Bunk
    • Microblaze init port v4   Michal Simek
    • Microblaze init port v4   Adrian Bunk
    • Microblaze init port v4   Stephen Neuendorffer
    • Microblaze init port v4   John Williams
    • Microblaze init port v4   Arnd Bergmann
    • Microblaze init port v4   Arnd Bergmann
    • Microblaze init port v4   H. Peter Anvin
    • Microblaze init port v4   Michal Simek
    • [PATCH 01/60] microblaze_v4: Kconfig patches   monstr at seznam.cz
    • [PATCH 01/60] microblaze_v4: Kconfig patches   Paul Mundt
    • [PATCH 02/60] microblaze_v4: Makefiles for Microblaze cpu   monstr at seznam.cz
    • [PATCH 03/60] microblaze_v4: Cpuinfo handling   monstr at seznam.cz
    • [PATCH 04/60] microblaze_v4: Open firmware files1   monstr at seznam.cz
    • [PATCH 02/60] microblaze_v4: Makefiles for Microblaze cpu   Adrian Bunk
    • [PATCH 02/60] microblaze_v4: Makefiles for Microblaze cpu   Michal Simek
    • [PATCH 02/60] microblaze_v4: Makefiles for Microblaze cpu   Adrian Bunk
    • [PATCH 02/60] microblaze_v4: Makefiles for Microblaze cpu   John Williams
    • [PATCH 05/60] microblaze_v4: Open firmware files2   monstr at seznam.cz
    • [PATCH 06/60] microblaze_v4: Open firmware common files   monstr at seznam.cz
    • [PATCH 07/60] microblaze_v4: Support for semaphores   monstr at seznam.cz
    • [PATCH 08/60] microblaze_v4: exception handling   monstr at seznam.cz
    • [PATCH 09/60] microblaze_v4: Signal support   monstr at seznam.cz
    • [PATCH 08/60] microblaze_v4: exception handling   Ray Lee
    • [PATCH 08/60] microblaze_v4: exception handling   Michal Simek
    • [PATCH 08/60] microblaze_v4: exception handling   Ray Lee
    • [PATCH 08/60] microblaze_v4: exception handling   Michal Simek
    • [PATCH 07/60] microblaze_v4: Support for semaphores   Adrian Bunk
    • [PATCH 07/60] microblaze_v4: Support for semaphores   Michal Simek
    • [PATCH 10/60] microblaze_v4: Interrupt handling, timer support, supported function   monstr at seznam.cz
    • [PATCH 11/60] microblaze_v4: cache support   monstr at seznam.cz
    • [PATCH 12/60] microblaze_v4: Generic dts file for platforms   monstr at seznam.cz
    • [PATCH 12/60] microblaze_v4: Generic dts file for platforms   Jon Loeliger
    • [PATCH 12/60] microblaze_v4: Generic dts file for platforms   Michal Simek
    • [PATCH 12/60] microblaze_v4: Generic dts file for platforms   Stephen Neuendorffer
    • [PATCH 12/60] microblaze_v4: Generic dts file for platforms   Michal Simek
    • [PATCH 12/60] microblaze_v4: Generic dts file for platforms   Jon Loeliger
    • [PATCH 12/60] microblaze_v4: Generic dts file for platforms   Grant Likely
    • [PATCH 12/60] microblaze_v4: Generic dts file for platforms   John Williams
    • [PATCH 12/60] microblaze_v4: Generic dts file for platforms   Stephen Neuendorffer
    • RE: [PATCH 12/60] microblaze_v4: Generic dts file for platforms   Michal Simek
    • Re: [PATCH 12/60] microblaze_v4: Generic dts file for platforms   Michal Simek
    • [PATCH 13/60] microblaze_v4: kernel modules support   monstr at seznam.cz
    • [PATCH 14/60] microblaze_v4: lmb support   monstr at seznam.cz
    • [PATCH 15/60] microblaze_v4: PVR support, cpuinfo support   monstr at seznam.cz
    • [PATCH 16/60] microblaze_v4: defconfig file   monstr at seznam.cz
    • [PATCH 17/60] microblaze_v4: head.S + linker script   monstr at seznam.cz
    • [PATCH 18/60] microblaze_v4: supported function for memory - kernel/lib   monstr at seznam.cz
    • [PATCH 19/60] microblaze_v4: checksum support   monstr at seznam.cz
    • [PATCH 20/60] microblaze_v4: early_printk support   monstr at seznam.cz
    • [PATCH 19/60] microblaze_v4: checksum support   Segher Boessenkool
    • Re: [PATCH 19/60] microblaze_v4: checksum support   Michal Simek
    • [PATCH 21/60] microblaze_v4: uaccess files   monstr at seznam.cz
    • [PATCH 22/60] microblaze_v4: heartbeat file   monstr at seznam.cz
    • [PATCH 23/60] microblaze_v4: setup.c - system setting   monstr at seznam.cz
    • [PATCH 24/60] microblaze_v4: asm-offsets   monstr at seznam.cz
    • [PATCH 24/60] microblaze_v4: asm-offsets   Paul Mundt
    • [PATCH 25/60] microblaze_v4: process and init task function   monstr at seznam.cz
    • [PATCH 25/60] microblaze_v4: process and init task function   Paul Mundt
    • [PATCH 26/60] microblaze_v4: time support   monstr at seznam.cz
    • [PATCH 27/60] microblaze_v4: virtualization   monstr at seznam.cz
    • [PATCH 26/60] microblaze_v4: time support   Thomas Gleixner
    • Re: [PATCH 26/60] microblaze_v4: time support   Michal Simek
    • [PATCH 28/60] microblaze_v4: ptrace support   monstr at seznam.cz
    • [PATCH 28/60] microblaze_v4: ptrace support   Paul Mundt
    • [PATCH 29/60] microblaze_v4: traps support   monstr at seznam.cz
    • [PATCH 30/60] microblaze_v4: support for a.out   monstr at seznam.cz
    • [PATCH 30/60] microblaze_v4: support for a.out   Adrian Bunk
    • [PATCH 30/60] microblaze_v4: support for a.out   Michal Simek
    • [PATCH 30/60] microblaze_v4: support for a.out   H. Peter Anvin
    • [PATCH 30/60] microblaze_v4: support for a.out   Michal Simek
    • [PATCH 30/60] microblaze_v4: support for a.out   H. Peter Anvin
    • [PATCH 30/60] microblaze_v4: support for a.out   Paul Mundt
    • [PATCH 29/60] microblaze_v4: traps support   Paul Mundt
    • [PATCH 31/60] microblaze_v4: memory inicialization, MMU, TLB   monstr at seznam.cz
    • [PATCH 31/60] microblaze_v4: memory inicialization, MMU, TLB   Arnd Bergmann
    • [PATCH 32/60] microblaze_v4: page.h, segment.h, unaligned.h   monstr at seznam.cz
    • [PATCH 33/60] microblaze_v4: includes SHM*, msgbuf   monstr at seznam.cz
    • [PATCH 33/60] microblaze_v4: includes SHM*, msgbuf   Arnd Bergmann
    • [PATCH 34/60] microblaze_v4: bug headers files   monstr at seznam.cz
    • [PATCH 35/60] microblaze_v4: definitions of types   monstr at seznam.cz
    • [PATCH 36/60] microblaze_v4: ioctl support   monstr at seznam.cz
    • [PATCH 37/60] microblaze_v4: io.h IO operations   monstr at seznam.cz
    • [PATCH 38/60] microblaze_v4: headers for executables format FLAT, ELF   monstr at seznam.cz
    • [PATCH 39/60] microblaze_v4: dma support   monstr at seznam.cz
    • [PATCH 40/60] microblaze_v4: headers for irq   monstr at seznam.cz
    • [PATCH 41/60] microblaze_v4: atomic.h bitops.h byteorder.h   monstr at seznam.cz
    • [PATCH 42/60] microblaze_v4: headers pgalloc.h pgtable.h   monstr at seznam.cz
    • [PATCH 43/60] microblaze_v4: system.h pvr.h processor.h   monstr at seznam.cz
    • [PATCH 44/60] microblaze_v4: clinkage.h linkage.h sections.h kmap_types.h   monstr at seznam.cz
    • [PATCH 45/60] microblaze_v4: stats headers   monstr at seznam.cz
    • [PATCH 46/60] microblaze_v4: termbits.h termios.h   monstr at seznam.cz
    • [PATCH 46/60] microblaze_v4: termbits.h termios.h   Alan Cox
    • [PATCH 46/60] microblaze_v4: termbits.h termios.h   Michal Simek
    • [PATCH 46/60] microblaze_v4: termbits.h termios.h   Arnd Bergmann
    • [PATCH 47/60] microblaze_v4: sigcontext.h siginfo.h   monstr at seznam.cz
    • [PATCH 48/60] microblaze_v4: headers simple files - empty or redirect to asm-generic   monstr at seznam.cz
    • [PATCH 49/60] microblaze_v4: headers files entry.h current.h mman.h registers.h sembuf.h   monstr at seznam.cz
    • [PATCH 50/60] microblaze_v4: device.h param.h topology.h   monstr at seznam.cz
    • [PATCH 48/60] microblaze_v4: headers simple files - empty or redirect to asm-generic   Arnd Bergmann
    • [PATCH 48/60] microblaze_v4: headers simple files - empty or redirect to asm-generic   Adrian Bunk
    • [PATCH 48/60] microblaze_v4: headers simple files - empty or redirect to asm-generic   Arnd Bergmann
    • [PATCH 48/60] microblaze_v4: headers simple files - empty or redirect to asm-generic   H. Peter Anvin
    • [PATCH 48/60] microblaze_v4: headers simple files - empty or redirect to asm-generic   Arnd Bergmann
    • [PATCH 48/60] microblaze_v4: headers simple files - empty or redirect to asm-generic   Adrian Bunk
    • [PATCH 48/60] microblaze_v4: headers simple files - empty or redirect to asm-generic   Arnd Bergmann
    • [PATCH 48/60] microblaze_v4: headers simple files - empty or redirect to asm-generic   Adrian Bunk
    • Re: [PATCH 48/60] microblaze_v4: headers simple files - empty or redirect to asm-generic   Michal Simek
    • [PATCH 48/60] microblaze_v4: headers simple files - empty or redirect to asm-generic   Sam Ravnborg
    • [PATCH 51/60] microblaze_v4: pool.h socket.h   monstr at seznam.cz
    • [PATCH 52/60] microblaze_v4: fcntl.h sockios.h ucontext.h   monstr at seznam.cz
    • [PATCH 53/60] microblaze_v4: setup.h string.h thread_info.h   monstr at seznam.cz
    • [PATCH 52/60] microblaze_v4: fcntl.h sockios.h ucontext.h   Arnd Bergmann
    • [PATCH 52/60] microblaze_v4: fcntl.h sockios.h ucontext.h   Arnd Bergmann
    • [PATCH 54/60] microblaze_v4: Kbuild file   monstr at seznam.cz
    • [PATCH 55/60] microblaze_v4: pci headers   monstr at seznam.cz
    • [PATCH 56/60] microblaze_v4: IPC headers   monstr at seznam.cz
    • [PATCH 57/60] microblaze_v4: entry.S   monstr at seznam.cz
    • [PATCH 58/60] microblaze_v4: sys_microblaze.c   monstr at seznam.cz
    • [PATCH 58/60] microblaze_v4: sys_microblaze.c   Arnd Bergmann
    • [PATCH 58/60] microblaze_v4: sys_microblaze.c   Michal Simek
    • [PATCH 58/60] microblaze_v4: sys_microblaze.c   Arnd Bergmann
    • [PATCH 58/60] microblaze_v4: sys_microblaze.c   Arnd Bergmann
    • [PATCH 59/60] microblaze_v4: syscall_table.S and unistd.h   monstr at seznam.cz
    • [PATCH 59/60] microblaze_v4: syscall_table.S and unistd.h   Arnd Bergmann
    • [PATCH 59/60] microblaze_v4: syscall_table.S and unistd.h   H. Peter Anvin
    • [PATCH 59/60] microblaze_v4: syscall_table.S and unistd.h   Paul Mundt
    • [PATCH 60/60] microblaze_v4: Enable drivers for Microblaze   monstr at seznam.cz
    • [PATCH 60/60] microblaze_v4: Enable drivers for Microblaze   Peter Korsgaard
    • [PATCH] Remove experimental status of kdump on PPC64   Bernhard Walle
    • [PATCH] Remove experimental status of kdump on PPC64   Josh Boyer
    • [PATCH] Remove experimental status of kdump on PPC64   Bernhard Walle
    • [PATCH] Remove experimental status of kdump on PPC64   Bernhard Walle
• [PATCH] [POWERPC] 85xx: TQM8548: add missing support for RTC and LM75   Wolfgang Grandegger
  • [PATCH] [POWERPC] 85xx: TQM8548: add missing support for RTC and LM75   Kumar Gala
  • [PATCH] [POWERPC] 85xx: TQM8548: add missing support for RTC and LM75   Wolfgang Grandegger
  • [PATCH] [POWERPC] 85xx: TQM8548: add missing support for RTC and LM75   Kumar Gala
  • [PATCH] [POWERPC] 85xx: TQM8548: add missing support for RTC and LM75   Wolfgang Grandegger
  • [PATCH] powerpc/bootwrapper: Add documentation of boot wrapper targets   John Linn
• [PATCH] powerpc: fixup lwsync at runtime   Kumar Gala
  • [PATCH] powerpc/bootwrapper: Add documentation of boot wrapper targets   Stephen Neuendorffer
    • [PATCH] powerpc/bootwrapper: Add documentation of boot wrapper targets   Peter Mendham
    • [PATCH] powerpc/bootwrapper: Add documentation of boot wrapper targets   Josh Boyer
      • [PATCH] powerpc/bootwrapper: Add documentation of boot wrappertargets   Stephen Neuendorffer
      • [PATCH] powerpc/bootwrapper: Add documentation of boot wrappertargets   Scott Wood
      • [PATCH] powerpc/bootwrapper: Add documentation of boot wrappertargets   Grant Likely
      • [PATCH] powerpc/bootwrapper: Add documentation of boot wrappertargets   Stephen Neuendorffer
• Why doesn't "mtmsr" instruction work well?   EVANGELION
  • [PATCH 0/2] powerpc: pci cleanup [rev2]   John Rigby
  • [PATCH 1/2] powerpc: pci config cleanup [rev2]   John Rigby
  • [PATCH 2/2] powerpc: Move mpc83xx_add_bridge to fsl_pci.c [rev2]   John Rigby
  • [PATCH 2/2] powerpc: Move mpc83xx_add_bridge to fsl_pci.c [rev2]   Grant Likely
  • [PATCH 1/2] powerpc: pci config cleanup [rev2]   Grant Likely
• [v2] Add support for Analogue & Micro ASP837E board   Scott Wood
• issue with kgdb on ppc   SEEMA pm
  • issue with kgdb on ppc   SEEMA pm
• [PATCH] Support NAND partitions >4GiB with Open Firmware   Mitch Bradley
  • [PATCH] Support NAND partitions >4GiB with Open Firmware   Mitch Bradley
  • [PATCH] Support NAND partitions >4GiB with Open Firmware   David Gibson
    • [PATCH] Support NAND partitions >4GiB with Open Firmware   Mitch Bradley
      • [PATCH] Support NAND partitions >4GiB with Open Firmware   David Gibson
      • [PATCH] Support NAND partitions >4GiB with Open Firmware   Mitch Bradley
      • [PATCH] Support NAND partitions >4GiB with Open Firmware   David Gibson
• [PATCH 06/12] net: use linux/of_{device,platform}.h instead of asm   Jeff Garzik
• [PATCH] powerpc: excplictly copy elements of pt_regs   Stephen Rothwell
• [PATCH 01/12] pata_mpc52xx: use linux/of_platform.h instead of asm   Jeff Garzik
  • [PATCH 01/12] pata_mpc52xx: use linux/of_platform.h instead of asm   Grant Likely
    • [PATCH 01/12] pata_mpc52xx: use linux/of_platform.h instead of asm   Stephen Rothwell
• [PATCH]: [MPC5200] (v2) Add ATA DMA support   Tim Yamin
• [PATCH] powerpc/booke: don't reinitialize time base   Kumar Gala
• [PATCH] powerpc: Add 83xx and 86xx to 6xx Multiplatform   Kumar Gala
  • [PATCH] powerpc: Add 83xx and 86xx to 6xx Multiplatform   Scott Wood
    • [PATCH v2] powerpc: Add 82xx/83xx/86xx to 6xx Multiplatform   Kumar Gala
    • [PATCH] powerpc: Add 83xx and 86xx to 6xx Multiplatform   Arnd Bergmann
    • [PATCH] powerpc: Add 83xx and 86xx to 6xx Multiplatform   Kumar Gala
• [PATCH v2] update crypto node definition and device tree instances   Kim Phillips
  • [PATCH v2] update crypto node definition and device tree instances   Grant Likely
    • [PATCH v2] update crypto node definition and device tree instances   Segher Boessenkool
• [PATCH] FS_ENET: Don't attempt to set mii_speed when fec_inf is null   Nye Liu
  • [PATCH] FS_ENET: Don't attempt to set mii_speed when fec_inf is null   Sergei Shtylyov
    • [PATCH] FS_ENET: Don't attempt to set mii_speed when fec_inf is null   Nye Liu
  • [PATCH] FS_ENET: Don't attempt to set mii_speed when fec_inf is null   Nye Liu
• [PATCH] powerpc: Add dma nodes to 83xx, 85xx and 86xx boards   Kumar Gala
  • [PATCH] powerpc: Add dma nodes to 83xx, 85xx and 86xx boards   Scott Wood
    • [PATCH] powerpc: Add dma nodes to 83xx, 85xx and 86xx boards   Kumar Gala
    • [PATCH v2] powerpc: Add dma nodes to 83xx, 85xx and 86xx boards   Kumar Gala
    • [PATCH v2] powerpc: Add dma nodes to 83xx, 85xx and 86xx boards   David Gibson
• [PATCH] POWERPC CPM: Minor cosmetic changes to udbg_putc   Nye Liu
• [PATCH] POWERPC CPM: Minor cosmetic changes to udbg_putc   Scott Wood
• [PATCH V2] Keep 3 high personality bytes across exec   Eric B Munson
  • [PATCH V2] Keep 3 high personality bytes across exec   Paul Mackerras
• [PATCH v2] powerpc/bootwrapper: Add documentation of boot wrapper targets   Grant Likely
  • [PATCH v2] powerpc/bootwrapper: Add documentation of boot wrapper targets   Paul Mackerras
• [PATCH 2.6.25.9] Make sure that include/asm-powerpc/spinlock.h does not trigger compilation warnings   Bart Van Assche
  • [PATCH 2.6.25.9] Make sure that include/asm-powerpc/spinlock.h does not trigger compilation warnings   Kumar Gala
  • [PATCH 2.6.25.9] Make sure that include/asm-powerpc/spinlock.h does not trigger compilation warnings   Bart Van Assche
• [PATCH] Fix wrong 'no interrupt' handling in of_i2c   Wolfram Sang
  • [PATCH] Fix wrong 'no interrupt' handling in of_i2c   Grant Likely
• FW: [PATCH] powerpc: Xilinx: adding virtex5 powerpc 440 support   Grant Likely
• [RFC] Non-numbered ibm iic driver   Sean MacLennan
  • [RFC] Non-numbered ibm iic driver   Jon Smirl
    • [RFC] Non-numbered ibm iic driver   Sean MacLennan
      • [RFC] Non-numbered ibm iic driver   Grant Likely
  • [RFC] Non-numbered ibm iic driver   Jon Loeliger
• [PATCH] Convert i2c-mpc from a platform driver into a of_platform driver, V2   Jon Smirl
  • [PATCH] Convert i2c-mpc from a platform driver into a of_platform driver, V2   Jochen Friedrich
  • [POWERPC] mpc7448hpc2.dts: remove chosen node from dts   Chunbo Luo
• [PATCH 12/60] microblaze_v4: Generic dts file for platforms   John Williams
  • [PATCH 2/4] spi: split up spi_new_device() to allow two stage registration.   David Brownell
  • [POWERPC] mpc7448hpc2.dts: remove chosen node from dts   Chunbo Luo
• High Memory problem on 2.4.22 Linux, 2GB ppc card   Ruksen INANIR

Last message date: Mon Jun 30 23:08:01 EST 2008
Archived on: Fri Jun 5 17:14:01 EST 2009

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...