[PATCH] powerpc/bootwrapper: Add documentation of boot wrapper targets

Scott Wood scottwood at freescale.com
Sat Jun 28 03:49:53 EST 2008


On Wed, Jun 25, 2008 at 01:21:04PM -0700, Grant Likely wrote:
> +   zImage.%:		Image usable by OpenFirmware.  Image expects firmware
> +			to provide the device tree using OpenFirmware
> +			interfaces.  Typically general purpose hardware uses
> +			this image format.

Is it really specific to Open Firmware?  I'd say something like: "Image
format usable by the firmware natively shipped on the board, if not
covered by another image type.  A device tree is not embedded into the
image."

-Scott



More information about the Linuxppc-dev mailing list