[PATCH 2/4] powerpc/85xx/86xx: some refactoring for fsl_uli1575 code
Anton Vorontsov
avorontsov at ru.mvista.com
Thu Jun 12 09:04:17 EST 2008
- Get rid of uses_fsl_uli_m1575, it does not scale for all cases.
Instead, let's explicitly use machine_is() for each fixup.
- Factor out MPC8610HPCD quirks to fsl_uli1575, and protect them with
machine_is(). One step closer to multiplatform kernels.
- Actually use fsl_uli1575 on MPC8610HPCD, so RTC quirk will be applied.
- RTC quirk applies to all boards though, so no machine_is() checks.
Signed-off-by: Anton Vorontsov <avorontsov at ru.mvista.com>
---
arch/powerpc/platforms/85xx/mpc85xx_ds.c | 2 -
arch/powerpc/platforms/86xx/Kconfig | 1 +
arch/powerpc/platforms/86xx/mpc8610_hpcd.c | 87 ---------------------
arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 2 -
arch/powerpc/platforms/fsl_uli1575.c | 115 ++++++++++++++++++++++++++--
5 files changed, 108 insertions(+), 99 deletions(-)
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index b010dc9..f21e7a6 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -115,7 +115,6 @@ void __init mpc85xx_ds_pic_init(void)
#ifdef CONFIG_PCI
static int primary_phb_addr;
-extern int uses_fsl_uli_m1575;
extern int uli_exclude_device(struct pci_controller *hose,
u_char bus, u_char devfn);
@@ -161,7 +160,6 @@ static void __init mpc85xx_ds_setup_arch(void)
}
}
- uses_fsl_uli_m1575 = 1;
ppc_md.pci_exclude_device = mpc85xx_exclude_device;
#endif
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 053f49a..39c02af 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -21,6 +21,7 @@ config SBC8641D
config MPC8610_HPCD
bool "Freescale MPC8610 HPCD"
select DEFAULT_UIMAGE
+ select FSL_ULI1575
help
This option enables support for the MPC8610 HPCD board.
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index eb16208..539a6ad 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -78,93 +78,6 @@ static void __init mpc86xx_hpcd_init_irq(void)
mpic_init(mpic1);
}
-#ifdef CONFIG_PCI
-static void __devinit quirk_uli1575(struct pci_dev *dev)
-{
- u32 temp32;
-
- /* Disable INTx */
- pci_read_config_dword(dev, 0x48, &temp32);
- pci_write_config_dword(dev, 0x48, (temp32 | 1<<26));
-
- /* Enable sideband interrupt */
- pci_read_config_dword(dev, 0x90, &temp32);
- pci_write_config_dword(dev, 0x90, (temp32 | 1<<22));
-}
-
-static void __devinit quirk_uli5288(struct pci_dev *dev)
-{
- unsigned char c;
- unsigned short temp;
-
- /* Interrupt Disable, Needed when SATA disabled */
- pci_read_config_word(dev, PCI_COMMAND, &temp);
- temp |= 1<<10;
- pci_write_config_word(dev, PCI_COMMAND, temp);
-
- pci_read_config_byte(dev, 0x83, &c);
- c |= 0x80;
- pci_write_config_byte(dev, 0x83, c);
-
- pci_write_config_byte(dev, PCI_CLASS_PROG, 0x01);
- pci_write_config_byte(dev, PCI_CLASS_DEVICE, 0x06);
-
- pci_read_config_byte(dev, 0x83, &c);
- c &= 0x7f;
- pci_write_config_byte(dev, 0x83, c);
-}
-
-/*
- * Since 8259PIC was disabled on the board, the IDE device can not
- * use the legacy IRQ, we need to let the IDE device work under
- * native mode and use the interrupt line like other PCI devices.
- * IRQ14 is a sideband interrupt from IDE device to CPU and we use this
- * as the interrupt for IDE device.
- */
-static void __devinit quirk_uli5229(struct pci_dev *dev)
-{
- unsigned char c;
-
- pci_read_config_byte(dev, 0x4b, &c);
- c |= 0x10;
- pci_write_config_byte(dev, 0x4b, c);
-}
-
-/*
- * SATA interrupt pin bug fix
- * There's a chip bug for 5288, The interrupt pin should be 2,
- * not the read only value 1, So it use INTB#, not INTA# which
- * actually used by the IDE device 5229.
- * As of this bug, during the PCI initialization, 5288 read the
- * irq of IDE device from the device tree, this function fix this
- * bug by re-assigning a correct irq to 5288.
- *
- */
-static void __devinit final_uli5288(struct pci_dev *dev)
-{
- struct pci_controller *hose = pci_bus_to_host(dev->bus);
- struct device_node *hosenode = hose ? hose->dn : NULL;
- struct of_irq oirq;
- int virq, pin = 2;
- u32 laddr[3];
-
- if (!hosenode)
- return;
-
- laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(31, 0) << 8);
- laddr[1] = laddr[2] = 0;
- of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq);
- virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
- oirq.size);
- dev->irq = virq;
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5288, final_uli5288);
-#endif /* CONFIG_PCI */
-
#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
static u32 get_busfreq(void)
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index f13704a..22ce0f3 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -107,7 +107,6 @@ mpc86xx_hpcn_init_irq(void)
}
#ifdef CONFIG_PCI
-extern int uses_fsl_uli_m1575;
extern int uli_exclude_device(struct pci_controller *hose,
u_char bus, u_char devfn);
@@ -149,7 +148,6 @@ mpc86xx_hpcn_setup_arch(void)
fsl_add_bridge(np, 0);
}
- uses_fsl_uli_m1575 = 1;
ppc_md.pci_exclude_device = mpc86xx_exclude_device;
#endif
diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c
index 756561c..ef74a07 100644
--- a/arch/powerpc/platforms/fsl_uli1575.c
+++ b/arch/powerpc/platforms/fsl_uli1575.c
@@ -51,15 +51,13 @@ u8 uli_pirq_to_irq[8] = {
ULI_8259_NONE, /* PIRQH */
};
-/* set in board code if you want this quirks to do something */
-int uses_fsl_uli_m1575;
-
/* Bridge */
static void __devinit early_uli5249(struct pci_dev *dev)
{
unsigned char temp;
- if (!uses_fsl_uli_m1575)
+ if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
+ !machine_is(mpc8572_ds))
return;
pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_IO |
@@ -82,7 +80,8 @@ static void __devinit quirk_uli1575(struct pci_dev *dev)
{
int i;
- if (!uses_fsl_uli_m1575)
+ if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
+ !machine_is(mpc8572_ds))
return;
/*
@@ -150,7 +149,8 @@ static void __devinit quirk_final_uli1575(struct pci_dev *dev)
* IRQ 14: Edge
* IRQ 15: Edge
*/
- if (!uses_fsl_uli_m1575)
+ if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
+ !machine_is(mpc8572_ds))
return;
outb(0xfa, 0x4d0);
@@ -176,7 +176,8 @@ static void __devinit quirk_uli5288(struct pci_dev *dev)
unsigned char c;
unsigned int d;
- if (!uses_fsl_uli_m1575)
+ if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
+ !machine_is(mpc8572_ds))
return;
/* read/write lock */
@@ -200,7 +201,8 @@ static void __devinit quirk_uli5229(struct pci_dev *dev)
{
unsigned short temp;
- if (!uses_fsl_uli_m1575)
+ if (!machine_is(mpc86xx_hpcn) && !machine_is(mpc8544_ds) &&
+ !machine_is(mpc8572_ds))
return;
pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE |
@@ -238,6 +240,103 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5249, quirk_final_uli5249);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x1575, quirk_final_uli1575);
+static void __devinit hpcd_quirk_uli1575(struct pci_dev *dev)
+{
+ u32 temp32;
+
+ if (!machine_is(mpc86xx_hpcd))
+ return;
+
+ /* Disable INTx */
+ pci_read_config_dword(dev, 0x48, &temp32);
+ pci_write_config_dword(dev, 0x48, (temp32 | 1<<26));
+
+ /* Enable sideband interrupt */
+ pci_read_config_dword(dev, 0x90, &temp32);
+ pci_write_config_dword(dev, 0x90, (temp32 | 1<<22));
+}
+
+static void __devinit hpcd_quirk_uli5288(struct pci_dev *dev)
+{
+ unsigned char c;
+ unsigned short temp;
+
+ if (!machine_is(mpc86xx_hpcd))
+ return;
+
+ /* Interrupt Disable, Needed when SATA disabled */
+ pci_read_config_word(dev, PCI_COMMAND, &temp);
+ temp |= 1<<10;
+ pci_write_config_word(dev, PCI_COMMAND, temp);
+
+ pci_read_config_byte(dev, 0x83, &c);
+ c |= 0x80;
+ pci_write_config_byte(dev, 0x83, c);
+
+ pci_write_config_byte(dev, PCI_CLASS_PROG, 0x01);
+ pci_write_config_byte(dev, PCI_CLASS_DEVICE, 0x06);
+
+ pci_read_config_byte(dev, 0x83, &c);
+ c &= 0x7f;
+ pci_write_config_byte(dev, 0x83, c);
+}
+
+/*
+ * Since 8259PIC was disabled on the board, the IDE device can not
+ * use the legacy IRQ, we need to let the IDE device work under
+ * native mode and use the interrupt line like other PCI devices.
+ * IRQ14 is a sideband interrupt from IDE device to CPU and we use this
+ * as the interrupt for IDE device.
+ */
+static void __devinit hpcd_quirk_uli5229(struct pci_dev *dev)
+{
+ unsigned char c;
+
+ if (!machine_is(mpc86xx_hpcd))
+ return;
+
+ pci_read_config_byte(dev, 0x4b, &c);
+ c |= 0x10;
+ pci_write_config_byte(dev, 0x4b, c);
+}
+
+/*
+ * SATA interrupt pin bug fix
+ * There's a chip bug for 5288, The interrupt pin should be 2,
+ * not the read only value 1, So it use INTB#, not INTA# which
+ * actually used by the IDE device 5229.
+ * As of this bug, during the PCI initialization, 5288 read the
+ * irq of IDE device from the device tree, this function fix this
+ * bug by re-assigning a correct irq to 5288.
+ *
+ */
+static void __devinit hpcd_final_uli5288(struct pci_dev *dev)
+{
+ struct pci_controller *hose = pci_bus_to_host(dev->bus);
+ struct device_node *hosenode = hose ? hose->dn : NULL;
+ struct of_irq oirq;
+ int virq, pin = 2;
+ u32 laddr[3];
+
+ if (!machine_is(mpc86xx_hpcd))
+ return;
+
+ if (!hosenode)
+ return;
+
+ laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(31, 0) << 8);
+ laddr[1] = laddr[2] = 0;
+ of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq);
+ virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
+ oirq.size);
+ dev->irq = virq;
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, hpcd_quirk_uli1575);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, hpcd_quirk_uli5288);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, hpcd_quirk_uli5229);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5288, hpcd_final_uli5288);
+
int uli_exclude_device(struct pci_controller *hose,
u_char bus, u_char devfn)
{
--
1.5.5.4
More information about the Linuxppc-dev
mailing list