XLLTemac with SGDMA working on virtex4FX ?

[Simon Frey]

Hi all,

does anyone have working driver for xps_ll_temac unsing sg dma and checksum offload on rx and tx ??

I use the xlnx kernel with ARCH=powerpc  and a device tree generated with the gen_mhs_devtree under EDK 10.1

I don't know what's wrong but i can't get or send anything  even the speed is only 10 Mb/s !

that's what i get when the kernel starts...

## Starting application at 0x004007d0 ...
Using Xilinx Virtex machine description
Linux version 2.6.25-xlnx (simon at linux) (gcc version 4.2.2) #11 PREEMPT Fri Jun 13 15:51:29 CEST 2008
Zone PFN ranges:
  DMA             0 ->    16384
  Normal      16384 ->    16384
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->    16384
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
Kernel command line: console=ttyS0,115200 ip=dhcp
Xilinx intc at 0x81800000 mapped to 0xfdfff000
PID hash table entries: 256 (order: 8, 1024 bytes)
clocksource: timebase mult[1400000] shift[22] registered
Console: colour dummy device 80x25
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 61704k/65536k available (2892k kernel code, 3768k reserved, 112k data, 141k bss, 144k init)
Mount-cache hash table entries: 512
net_namespace: 536 bytes
NET: Registered protocol family 16
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
83e00000.serial: ttyS0 at MMIO 0x83e00003 (irq = 16) is a 16550A
console [ttyS0] enabled
brd: module loaded
loop: module loaded
Device Tree Probing 'ethernet'
xilinx_lltemac 81c00000.ethernet: MAC address is now  0: a:35: 0:22: 1
xilinx_lltemac 81c00000.ethernet: XLlTemac: using DMA mode.
XLlTemac: Dma base address: phy: 0x84600100, virt: 0xc5010100
XLlTemac: buffer descriptor size: 32768 (0x8000)
XLlTemac: Allocating DMA descriptors with kmalloc<6>XLlTemac: (buffer_descriptor_init) phy: 0x3868000, virt: 0xc3868000, size: 0x8000
XTemac: PHY detected at address 4.
xilinx_lltemac 81c00000.ethernet: eth0: Xilinx TEMAC at 0x81C00000 mapped to 0xC500E000, irq=17
mice: PS/2 mouse device common for all mice
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
eth0: XLlTemac: Options: 0x3fa
eth0: XLlTemac: allocating interrupt 19 for dma mode tx.
eth0: XLlTemac: allocating interrupt 18 for dma mode rx.
eth0: XLlTemac: speed set to 10Mb/s
eth0: XLlTemac: Send Threshold = 240, Receive Threshold = 40
eth0: XLlTemac: Send Wait bound = 254, Receive Wait bound = 254
Sending DHCP requests ...... timed out!
IP-Config: Reopening network devices...
eth0: XLlTemac: Options: 0x3fa                                                                                                             



I can see the led blinking on my switch but don't see nothing using wireshak !!!


Finaly, i know the the temac works because i can use it with uboot !!! even 
at speed 1000.

In:    serial
Out:   serial
Err:   serial
U-Boot relocated to 03fcf000
### main_loop entered: bootdelay=3

### main_loop: bootcmd="loooaadd %addr"
Press Enter within 3 seconds to stop autoboot
Unknown command 'loooaadd' - try 'help'
=> setenv bootfile zImage.virtex
=> tftp 40000
eth0: Xilinx XPS LocalLink Tri-Mode Ether MAC #0 at 0x81C00000.
1000BASE-T/FD
TFTP from server 192.168.1.100; our IP address is 192.168.1.200
Filename 'zImage.virtex'.
Load address: 0x40000
Loading: #################################################################
         ########################################################
done
Bytes transferred = 1772215 (1b0ab7 hex)
=>


so if someone already had that problem... 

Thanks in advance 

Simon



      _____________________________________________________________________________ 
Envoyez avec Yahoo! Mail. Une boite mail plus intelligente http://mail.yahoo.fr