[PATCH v2 1/4] [POWERPC] 85xx: add board support for the TQM8548 modules

[Wolfgang Grandegger]

David Gibson wrote:
> On Thu, Jun 05, 2008 at 08:43:51AM -0500, Kumar Gala wrote:
>> On Jun 5, 2008, at 4:05 AM, Wolfgang Grandegger wrote:
> [snip]
>>> +			timebase-frequency = <0>;	// from U-Boot
>>> +			bus-frequency = <0>;	// from U-Boot
>>> +			clock-frequency = <0>;	// from U-Boot
>> u-boot will add this for us so no need for them.
> 
> I think it's worth including them (with the comments) for
> documentation purposes though.  Plus allowing the bootloader and
> bootwrapper to just replace property values without resizing or
> inserting is somewhat worthwhile of itself.

I understand your point and while testing the new blob, I realized that
 the DTB image created with

 $ make ARCH=powerpc tqm8548.dtb

does not work because work space is missing:

  ## Flattened Device Tree blob at 00900000
     Booting using the fdt blob at 0x900000
     Loading Device Tree to 007fe000, end 007ff8e0 ... OK
  WARNING: could not create /chosen FDT_ERR_NOSPACE.
  ERROR: /chosen node create failed - must RESET the board to recover.

As I see it, I have to define DTS_FLAGS manually

  $ export DTS_FLAGS="-R4 -S0x3000"
  $ make ARCH=powerpc tqm8548.dtb

to get a working blob. Is that the intended behavior?

Wolfgang.