August 2004 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Sun Aug 1 01:49:19 EST 2004
Ending: Mon Aug 30 18:13:19 EST 2004
Messages: 276

• [PATCH] I2C driver for MPC107/824x/85xx/52xx   Adrian Cox
• Regarding parallel port in MPC8245...   m madhuker
• Regarding parallel port in MPC8245...   Pantelis Antoniou
• Regarding parallel port in MPC8245...   Wolfgang Denk
• Regarding parallel port in MPC8245...   Wolfgang Denk
• Looking for fast flash programming code   Richard Williams
• Looking for fast flash programming code   Eugene Surovegin
• Looking for fast flash programming code   David Woodhouse
• Large TLBs on 40x   Josh Boyer
• Large TLBs on 40x   Matt Porter
• Large TLBs on 40x   Josh Boyer
• Large TLBs on 40x   Dan Malek
• Large TLBs on 40x   Matt Porter
• Large TLBs on 40x   Dan Malek
• rpx8260_defconfig problems   Jeff Angielski
• rpx8260_defconfig problems   Dan Malek
• Disabling the serial console upsets CPM UARTS   Richard Williams
• Disabling the serial console upsets CPM UARTS   Wolfgang Denk
• Linux booting problems in the IBM Bubinga Board   Nivedita Pitre
• Linux booting problems in the IBM Bubinga Board   Wolfgang Denk
• Linux booting problems in the IBM Bubinga Board   Nivedita Pitre
• How to remove JFFS2 'Making dirty' display on RPXlite DW?   Song Sam
• Has anybody successfuly run linux-2.6.8-rc2 (or any previous linu x 2.6 version) on MPC 82xx ?   Povolotsky, Alexander
• MPHY supported in mpc8260sar   Zoran Stojsavljevic
• Init hangs   Marco Schramel
• Has anybody successfuly run linux-2.6.8-rc2 (or any previous linu x 2.6 version) on MPC 82xx ?   miguel.valero at axxessit.no
• Can't load linux to est8260   Mouloud Ameni
• Init hangs   Wolfgang Denk
• Can't load linux to est8260   Wolfgang Denk
• Has anybody successfuly run linux-2.6.8-rc2 (or any previous linu x 2.6 version) on MPC 82xx ?   Povolotsky, Alexander
• How to remove JFFS2 'Making dirty' display on RPXlite DW?   David Ho
• How to remove JFFS2 'Making dirty' display on RPXlite DW?   Mark Chambers
• How to remove JFFS2 'Making dirty' display on RPXlite DW?   David Woodhouse
• How to remove JFFS2 'Making dirty' display on RPXlite DW?   David Woodhouse
• How to remove JFFS2 'Making dirty' display on RPXlite DW?   Mark Chambers
• How to remove JFFS2 'Making dirty' display on RPXlite DW?   David Woodhouse
• Init hangs   Marco Schramel
• linux-2.6.8-rc2 cross-compilation errors with CONFIG_ADS8272=y   Povolotsky, Alexander
• Init hangs   Wolfgang Denk
• linux-2.6.8-rc2 cross-compilation errors with CONFIG_ADS8272=y   Kumar Gala
• Init hangs   Marco Schramel
• linux-2.6.8-rc2 cross-compilation errors with CONFIG_ADS8272= y   Povolotsky, Alexander
• Init hangs   Wolfgang Denk
• Init hangs   Ralph Siemsen
• Init hangs   Dan Malek
• Init hangs   Wolfgang Denk
• Init hangs   Ralph Siemsen
• Init hangs   Robert P. J. Day
• Init hangs   Dan Malek
• Init hangs   Dan Malek
• Init hangs   Wolfgang Denk
• rpx8260_defconfig problems   Jeff Angielski
• rpx8260_defconfig problems   Dan Malek
• Embedded SDRAM memory tester   Stephen Williams
• Embedded SDRAM memory tester   Wolfgang Denk
• How to remove JFFS2 'Making dirty' display on RPXlite DW?   Song Sam
• How to remove JFFS2 'Making dirty' display on RPXlite DW?   David Woodhouse
• How to remove JFFS2 'Making dirty' display on RPXlite DW?   Song Sam
• Embedded SDRAM memory tester   Stefan Nickl
• kernel panics   Mouloud Ameni
• How to remove JFFS2 'Making dirty' display on RPXlite DW?   Marcelo Tosatti
• 2.4 versus 2.6 patches   Marcelo Tosatti
• 82xx and cache coherency between CPM and CPU   Peter Krogsgaard
• Boot time with several filesystems on RPXlite DW   Song Sam
• 2.4 versus 2.6 patches   Marcelo Tosatti
• Large TLBs on 40x   Josh Boyer
• 2.4 versus 2.6 patches   Song Sam
• Large TLBs on 40x   Dan Malek
• Boot time with several filesystems on RPXlite DW   Wolfgang Denk
• 2.4 versus 2.6 patches   Marcelo Tosatti
• Boot time with several filesystems on RPXlite DW   Song Sam
• Large TLBs on 40x   Matt Porter
• Large TLBs on 40x   Dan Malek
• Boot time with several filesystems on RPXlite DW   Tom Rini
• Boot time with several filesystems on RPXlite DW   Wolfgang Denk
• an error about "relocation truncated"   lew kenny
• Boot time with several filesystems on RPXlite DW   Song Sam
• PCI driver development kit   m madhuker
• Watchdog timer reset   Eli Brin
• [PATCH] Set _IO_BASE on 8260 PCI.   David Woodhouse
• UART Problems booting linux on est8260   Latsky Sterren-LTSS001
• UART Problems booting linux on est8260   Wolfgang Denk
• Large TLBs on 40x   Josh Boyer
• an error about "relocation truncated"   Wolfgang Denk
• Large TLBs on 40x   Dan Malek
• Large TLBs on 40x   Matt Porter
• Large TLBs on 40x   Josh Boyer
• Large TLBs on 40x   Josh Boyer
• Large TLBs on 40x   Dan Malek
• Large TLBs on 40x   Dan Malek
• Large TLBs on 40x   Matt Porter
• Watchdog timer reset   Eli Brin
• Linux 2.4.27-pre6-bk hangs on MPC8540 board   Cordes, Aaron M
• Watchdog timer reset   Wolfgang Denk
• Linux 2.4.27-pre6-bk hangs on MPC8540 board   Marc Leeman
• Watchdog timer reset   VanBaren, Gerald (AGRE)
• Linux 2.4.27-pre6-bk hangs on MPC8540 board   Wolfgang Denk
• Watchdog timer reset   Eli Brin
• MPC82xx enet on SCC3   Oliver Fuchs
• MPC82xx enet on SCC3   Dan Malek
• Linux 2.4.27-pre6-bk hangs on MPC8540 board   Cordes, Aaron M
• Linux 2.4.27-pre6-bk hangs on MPC8540 board   Cordes, Aaron M
• UBoot to boot from RAM   Junita Ajith
• Linux 2.4.27-pre6-bk hangs on MPC8540 board   Cordes, Aaron M
• Linux 2.4.27-pre6-bk hangs on MPC8540 board   Kumar Gala
• Linux 2.4.27-pre6-bk hangs on MPC8540 board   Swarthout Edward L-SWARTHOU
• Linux 2.4.27-pre6-bk hangs on MPC8540 board   Conor McLoughlin
• How to boot u-boot from RAM   Junita Ajith
• How to boot U-Boot from RAM   Junita Ajith
• JTAG debug mechanism   Li Yang-r58472
• JTAG debug mechanism   Dan Malek
• How to boot u-boot from RAM   Wolfgang Denk
• JTAG debug mechanism   Song Sam
• Linux 2.4.27-pre6-bk hangs on MPC8540 board   Kumar Gala
• JTAG debug mechanism   Mark Chambers
• How to boot U-Boot from RAM   Wolfgang Denk
• JTAG debug mechanism   Wolfgang Denk
• JTAG debug mechanism   Song Sam
• Linux 2.4.27-pre6-bk hangs on MPC8540 board   Chris Zimman
• Poor IDE performance on Linux 2.6.x   Felix Domke
• how to choose cpu with pci and fec function ??   Michael Hao
• how to choose cpu with pci and fec function ??   Wolfgang Denk
• MPC82xx enet on SCC3   Oliver Fuchs
• MPC82xx enet on SCC3   Wolfgang Denk
• MPC82xx enet on SCC3   Ralph Siemsen
• MPC82xx enet on SCC3   Dan Malek
• MPC82xx enet on SCC3   Oliver Fuchs
• MPC82xx enet on SCC3   Oliver Fuchs
• 8260 FCC buffer underrun   Jeff Angielski
• 8260 FCC buffer underrun   VanBaren, Gerald (AGRE)
• uart.c doesn't compile   Jaap-Jan Boor
• Fw: MPHY supported in mpc8260sar   Zoran Stojsavljevic
• [Linux-ATM-General] Fw: MPHY supported in mpc8260sar   Gilad Rom
• [Linux-ATM-General] Fw: MPHY supported in mpc8260sar   Zoran Stojsavljevic
• PCI scanning and devices initialization   Stefano Gaiotto
• PCI scanning and devices initialization   Sylvain Munaut
• PCI scanning and devices initialization   Juergen.Beisert at windriver.com
• Issues with raw write using MTD Char Driver   Raghav K
• uart.c doesn't compile   Kumar Gala
• Issues with raw write using MTD Char Driver   Wolfgang Denk
• MPC855T   Sulamita Garcia
• No L2 Cache on PReP Machine   Hager, Johannes, HRD/AB
• No L2 Cache on PReP Machine   Adrian Cox
• No L2 Cache on PReP Machine   Hager, Johannes, HRD/AB
• inline assembly code in MPC8245...   m madhuker
• No L2 Cache on PReP Machine   Adrian Cox
• [RFC] Test patch for Sandpoint X2   Adrian Cox
• [RFC] Test patch for Sandpoint X2   Dan Malek
• 405EP and pci_alloc_consistent()   Mark S. Mathews
• PCI problem on MPC8250 target   Conor McLoughlin
• 405EP and pci_alloc_consistent()   Eugene Surovegin
• 405EP and pci_alloc_consistent()   Mark S. Mathews
• 405GPr PCI target/host   Steven Blakeslee
• 405GPr PCI target/host   Eugene Surovegin
• 405GPr PCI target/host   Adrian Cox
• 405GPr PCI target/host   Carl Aage Amundsen
• 405GPr PCI target/host   Eugene Surovegin
• PCI scanning and devices initialization   Stefano Gaiotto
• PCI scanning and devices initialization   Stefano Gaiotto
• PCI scanning and devices initialization   Steve Boorman
• PCI scanning and devices initialization   Stefano Gaiotto
• Evaluation boarf for MPC8270   annamaya
• 30MB ramdisk needs more than 64MB SDRAM?   Song Sam
• How to check MTD partition content?   Song Sam
• How to check MTD partition content?   Wolfgang Grandegger
• port from 2.4.21 to 2.6.8 for mpc5200 - part 1   Andrey Volkov
• port from 2.4.21 to 2.6.8 for mpc5200 - part 1   Sam Ravnborg
• port from 2.4.21 to 2.6.8 for mpc5200 - part 1   Wolfgang Denk
• [Fwd: Evaluation boarf for MPC8270]   Frank Robbins
• How to check MTD partition content?   Song Sam
• How to port ppc-linux to new custom boards? (virtexII)   Patrick Huesmann
• How to port ppc-linux to new custom boards? (virtexII)   Song Sam
• How to port ppc-linux to new custom boards? (virtexII)   Peter Ryser
• How to port ppc-linux to new custom boards? (virtexII)   Patrick Huesmann
• How to port ppc-linux to new custom boards? (virtexII)   Marc Leeman
• How to port ppc-linux to new custom boards? (virtexII)   Oliver Fuchs
• [RFC] Re: BestComm and fec   Andrey Volkov
• How to port ppc-linux to new custom boards? (virtexII)   Peter Ryser
• [RFC] Re: BestComm and fec   Sylvain Munaut
• How to port ppc-linux to new custom boards? (virtexII)   Peter 'p2' De Schrijver
• [RFC] Re: BestComm and fec   David Woodhouse
• How to port ppc-linux to new custom boards? (virtexII)   Patrick Huesmann
• How to port ppc-linux to new custom boards? (virtexII)   Peter 'p2' De Schrijver
• How to port ppc-linux to new custom boards? (virtexII)   Song Sam
• [RFC] Re: BestComm and fec   Andrey Volkov
• RFI doesn't branch off?   Amit Shah
• value of XIP? and whether it works with 2.6 kernel?   Robert P. J. Day
• [RFC] Re: BestComm and fec   Dale Farnsworth
• [RFC] MPC5200 dev (was Re: [RFC] Re: BestComm and fec)   Sylvain Munaut
• MPC8560 boot console (CPM SCC) driver problem   Gérard Guével
• MPC8560 util.S compilation error with E500 core support   Gérard Guével
• [RFC] MPC5200 dev (was Re: [RFC] Re: BestComm and fec)   Andrey Volkov
• MPC8560 util.S compilation error with E500 core support   Kumar Gala
• MPC8560 boot console (CPM SCC) driver problem   Kumar Gala
• Problem trying to address custom hardware   Oliver King-Smith
• How to port ppc-linux to new custom boards? (virtexII)   Song Sam
• Problem trying to address custom hardware   Eugene Surovegin
• How to port ppc-linux to new custom boards? (virtexII)   Marius Groeger
• Problem trying to address custom hardware   Rupesh S
• value of XIP? and whether it works with 2.6 kernel?   Wolfgang Denk
• How to port ppc-linux to new custom boards? (virtexII)   Marc Leeman
• Current PPC 2.4 kernel trees?   Andriy Korud
• RFI doesn't branch off?   Amit Shah
• value of XIP? and whether it works with 2.6 kernel?   Mark Chambers
• graphic card framebuffer   Ronen Shitrit
• How to port ppc-linux to new custom boards? (virtexII)   David Ho
• How to port ppc-linux to new custom boards? (virtexII)   Peter Vandenabeele
• mpc5200 and ddr   Andrey Volkov
• value of XIP? and whether it works with 2.6 kernel?   Dan Malek
• value of XIP? and whether it works with 2.6 kernel?   Mark Chambers
• ppc-linux still not booting on my virtexII board   Patrick Huesmann
• Anyone with MPC82xx PCI on kernel 2.6?   Conor McLoughlin
• mpc5200 and ddr   Andrey Volkov
• value of XIP? and whether it works with 2.6 kernel?   Dan Malek
• Problem trying to address custom hardware   Matt Porter
• Anyone with MPC82xx PCI on kernel 2.6?   Conor McLoughlin
• Current PPC 2.4 kernel trees?   Matt Porter
• ppc-linux still not booting on my virtexII board   Scott Anderson
• ppc-linux still not booting on my virtexII board   Patrick Huesmann
• Handling of cascaded interrupt controllers   Jeff Domogala
• ppc-linux still not booting on my virtexII board   Patrick Huesmann
• m8xx hang in reboot   Mark S. Mathews
• Uboot SMC2   Balajee Premraj
• m8xx hang in reboot (fwd)   Mark S. Mathews
• m8xx hang in reboot (fwd)   Mark S. Mathews
• Problem trying to address custom hardware   Oliver King-Smith
• Problem trying to address custom hardware   Matt Porter
• Uboot SMC2   Wolfgang Denk
• mpc5200 and ddr   Andrew Dennison
• value of XIP? and whether it works with 2.6 kernel?   David Woodhouse
• mpc5200 and ddr   Ho Jeffrey-r26191
• m8xx hang in reboot   Dan Malek
• value of XIP? and whether it works with 2.6 kernel?   Dan Malek
• m8xx hang in reboot   Stefan Stürke
• Current PPC 2.4 kernel trees?   Andriy Korud
• How to port ppc-linux to new custom boards? (virtexII)   Marc Leeman
• Cramfs Limitations   Song Sam
• Does ext2 based on MTD acceptable for Embedded Development?   Song Sam
• m8xx hang in reboot (fwd)   VanBaren, Gerald (AGRE)
• mpc5200 and ddr   Mark Chambers
• [SPAM] Re: m8xx hang in reboot   Mark S. Mathews
• m8xx hang in reboot   Mark S. Mathews
• m8xx hang in reboot (fwd)   Mark S. Mathews
• [SPAM] Re: m8xx hang in reboot   Gary Thomas
• [SPAM] Re: m8xx hang in reboot   Dan Malek
• Cramfs Limitations   Wolfgang Denk
• [SPAM] Re: m8xx hang in reboot   Mark S. Mathews
• UDP packet loss (8xx/2.4.26)   Smith, Craig
• UDP packet loss (8xx/2.4.26)   Eugene Surovegin
• Cramfs Limitations   Song Sam
• Does ext2 based on MTD acceptable for Embedded Development?   Oliver Fuchs
• Cramfs Limitations   Wolfgang Denk
• Does ext2 based on MTD acceptable for Embedded Development?   Wolfgang Denk
• Cramfs Limitations   Song Sam
• ushort fcc_fcce   Jaap-Jan Boor
• Does ext2 based on MTD acceptable for Embedded Development?   Oliver Fuchs
• How to port ppc-linux to new custom boards? (virtexII)   Patrick Huesmann
• [RFC] Remove G2_LE core decl from CLASSIC_PPC part of arch/ppc/kernel/cputable.c   Andrey Volkov
• Kernel oops when initializing ethernet driver   Patrick Huesmann
• Kernel oops when initializing ethernet driver   Patrick Huesmann
• Kernel oops when initializing ethernet driver   Patrick Huesmann
• Kernel oops when initializing ethernet driver   Andrei Konovalov
• Kernel oops when initializing ethernet driver   Patrick Huesmann
• Kernel oops when initializing ethernet driver   Patrick Huesmann
• [RFC] Remove G2_LE core decl from CLASSIC_PPC part of arch/ppc/kernel/cputable.c   Kumar Gala
• Does ext2 based on MTD acceptable for Embedded Development?   Wolfgang Denk
• ushort fcc_fcce   Pantelis Antoniou
• ushort fcc_fcce   Dan Malek
• [RFC] Remove G2_LE core decl from CLASSIC_PPC part of arch/ppc/kernel/cputable.c   Andrey Volkov
• [RFC] Remove G2_LE core decl from CLASSIC_PPC part of arch/ppc/kernel/cputable.c   Dan Malek
• [RFC] Remove G2_LE core decl from CLASSIC_PPC part of arch/ppc/kernel/cputable.c   Andrey Volkov
• ushort fcc_fcce   Jaap Jan Boor
• [RFC] Remove G2_LE core decl from CLASSIC_PPC part of arch/ppc/kernel/cputable.c   Dan Malek
• 440SP evaluation board?   Gary McKenna
• Does ext2 based on MTD acceptable for Embedded Development?   Rupesh S
• Does ext2 based on MTD acceptable for Embedded Development?   Wolfgang Denk

Last message date: Mon Aug 30 18:13:19 EST 2004
Archived on: Mon Jul 23 18:00:41 EST 2007

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...