linux-2.6.8-rc2 cross-compilation errors with CONFIG_ADS8272= y

Fri Aug 6 17:56:08 EST 2004

Kumar,

Is building the boot/simple/* code invoked by having

CONFIG_EMBEDDEDBOOT=y

?

I don't think that I choose above configuration option explicitly - I think
it came up as a "bonus" ;-).

Where/how in "menuconfig" I could disable this option ?

Thanks,
Alex

-----Original Message-----
From: Kumar Gala [mailto:kumar.gala at freescale.com]
Sent: Thursday, August 05, 2004 6:51 PM
To: Povolotsky, Alexander
Cc: linuxppc-embedded at lists.linuxppc.org
Subject: Re: linux-2.6.8-rc2 cross-compilation errors with
CONFIG_ADS8272=y

Alex,

I know I've build recent (not sure if it was -rc2) kernel for 8272 ADS
with a native PPC compiler.  However, I was building the u-boot target
which did not include the boot/simple/* code.

- kumar

On Aug 5, 2004, at 10:49 AM, Povolotsky, Alexander wrote:

>
> Hi,
>
> I have tried 2 more configurational variants:
>
> 1) with CONFIG_SANDPOINT=y
>
> This cross-compiled but would not boot - similarly to previously reported
...
>
> 2) with
>
>  CONFIG_ADS8272=y
>  CONFIG_PQ2ADS=y
>  CONFIG_8260=y
>  CONFIG_8272=y
>  CONFIG_CPM2=y
>  CONFIG_EMBEDDEDBOOT=y
>
> In this case the cross-compilation build
>
> make ARCH=ppc CROSS_COMPILE=powerpc-linux-
>
>  came to following errors:
>
> arch/ppc/boot/simple/embed_config.c:29: warning: `bdinfo' defined but
> not used arch/ppc/boot/simple/embed_config.c:42: warning: `def_enet_addr'

> defined but not used
> arch/ppc/boot/simple/embed_config.c:415: warning: `clk_8260' defined
> but not used arch/ppc/boot/simple/embed_config.c:457: warning: `clk_8280'
defined
> but not used
>   CC      arch/ppc/boot/simple/dummy.o
> powerpc-linux-objcopy -O elf32-powerpc \
>         --add-section=.image=arch/ppc/boot/images/vmlinux.gz \
>         --set-section-flags=.image=contents,alloc,load,readonly,data \
>         arch/ppc/boot/simple/dummy.o arch/ppc/boot/simple/image.o
> powerpc-linux-ld -T /cygdrive/d/Profiles/apovolot/linux-2.6.8-rc2/linux-
> 2.6.7/arch/ppc/boot/ld.script -Ttext 0x00400000 -Bstatic -o
> arch/ppc/boot/simple/zvmlinu
> x arch/ppc/boot/simple/head.o arch/ppc/boot/simple/relocate.o
> arch/ppc/boot/simple/misc-embedded.o arch/ppc/boot/simple/embed_config.o
> arch/ppc/boot/simple/image.o arch/ppc/boot/common/lib.a
arch/ppc/boot/lib/lib.a
> arch/ppc/boot/simple/misc-embedded.o(.text+0x2c): In function
> `load_kernel':
> : undefined reference to `embed_config'
> make[2]: *** [arch/ppc/boot/simple/zvmlinux] Error 1
> make[1]: *** [simple] Error 2
> make: *** [zImage] Error 2
>
> -----Original Message-----
> From: Povolotsky, Alexander
> Sent: Thursday, August 05, 2004 8:41 AM
> To: linuxppc-embedded at lists.linuxppc.org
> Subject: RE: Has anybody successfuly run linux-2.6.8-rc2 (or any
> previous linu x 2.6 version) on MPC 82xx ?
>
>
> Hi Miguel,
>
> OK - I redid configuration and rebuilt it - now it hangs but without
> resetting the processor
>
> => tftpboot 400000 uimagenfs
> TFTP from server 172.16.240.200; our IP address is 172.16.119.3
> Filename 'uimagenfs'.
> Load address: 0x400000
> Loading:
> #################################################################
>
> #################################################################
>
> #################################################################
>          #################################################
> done
> Bytes transferred = 1246731 (13060b hex)
> => bootm
> ## Booting image at 00400000 ...
>    Image Name:   linux-2.6.8-rc2 Kernel for PQ2FA
>    Image Type:   PowerPC Linux Kernel Image (gzip compressed)
>    Data Size:    1246667 Bytes =  1.2 MB
>    Load Address: 00000000
>    Entry Point:  00000000
>    Verifying Checksum ... OK
>    Uncompressing Kernel Image ... OK
>
> The sequence of building I used is:
>
> make ARCH=ppc CROSS_COMPILE=powerpc-linux-  clean
> make ARCH=ppc CROSS_COMPILE=powerpc-linux-  defconfig
> make ARCH=ppc CROSS_COMPILE=powerpc-linux-  menuconfig
> make ARCH=ppc CROSS_COMPILE=powerpc-linux-
> cd arch/ppc/boot/images
> ln -s /cygdrive/d/Profiles/apovolot/U-boot/u-boot-1.1.1/tools/mkimage
>
> ./mkimage -n 'linux-2.6.8-rc2 Kernel for PQ2FADS' -A ppc -O linux  -T
> kernel
> -C gzip -a 0 -e 0  -d ./vmlinux.gz ./uImage
>
> My .config file now is:
>
> #
> # Automatically generated make config: don't edit
> #
> CONFIG_MMU=y
> CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> CONFIG_HAVE_DEC_LOCK=y
> CONFIG_PPC=y
> CONFIG_PPC32=y
> CONFIG_GENERIC_NVRAM=y
>
> #
> # Code maturity level options
> #
> # CONFIG_EXPERIMENTAL is not set
> CONFIG_CLEAN_COMPILE=y
> CONFIG_STANDALONE=y
> CONFIG_BROKEN_ON_SMP=y
>
> #
> # General setup
> #
> CONFIG_SWAP=y
> CONFIG_SYSVIPC=y
> CONFIG_BSD_PROCESS_ACCT=y
> # CONFIG_BSD_PROCESS_ACCT_V3 is not set
> CONFIG_SYSCTL=y
> # CONFIG_AUDIT is not set
> CONFIG_LOG_BUF_SHIFT=14
> CONFIG_HOTPLUG=y
> # CONFIG_IKCONFIG is not set
> # CONFIG_EMBEDDED is not set
> CONFIG_KALLSYMS=y
> # CONFIG_KALLSYMS_EXTRA_PASS is not set
> CONFIG_FUTEX=y
> CONFIG_EPOLL=y
> CONFIG_IOSCHED_NOOP=y
> CONFIG_IOSCHED_AS=y
> CONFIG_IOSCHED_DEADLINE=y
> CONFIG_IOSCHED_CFQ=y
> # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
>
> #
> # Loadable module support
> #
> # CONFIG_MODULES is not set
>
> #
> # Processor
> #
> CONFIG_6xx=y
> # CONFIG_40x is not set
> # CONFIG_44x is not set
> # CONFIG_POWER3 is not set
> # CONFIG_POWER4 is not set
> # CONFIG_8xx is not set
> # CONFIG_E500 is not set
> # CONFIG_CPU_FREQ is not set
> CONFIG_EMBEDDEDBOOT=y
> CONFIG_PPC_STD_MMU=y
>
> #
> # Platform options
> #
> # CONFIG_PPC_MULTIPLATFORM is not set
> # CONFIG_APUS is not set
> # CONFIG_WILLOW is not set
> # CONFIG_PCORE is not set
> # CONFIG_POWERPMC250 is not set
> # CONFIG_EV64260 is not set
> # CONFIG_SPRUCE is not set
> # CONFIG_LOPEC is not set
> # CONFIG_MCPN765 is not set
> # CONFIG_MVME5100 is not set
> # CONFIG_PPLUS is not set
> # CONFIG_PRPMC750 is not set
> # CONFIG_PRPMC800 is not set
> # CONFIG_SANDPOINT is not set
> # CONFIG_ADIR is not set
> # CONFIG_K2 is not set
> # CONFIG_PAL4 is not set
> # CONFIG_GEMINI is not set
> CONFIG_EST8260=y
> # CONFIG_SBC82xx is not set
> # CONFIG_SBS8260 is not set
> # CONFIG_RPX6 is not set
> # CONFIG_TQM8260 is not set
> # CONFIG_ADS8272 is not set
> CONFIG_8260=y
> CONFIG_CPM2=y
> # CONFIG_PC_KEYBOARD is not set
> # CONFIG_SMP is not set
> # CONFIG_PREEMPT is not set
> # CONFIG_HIGHMEM is not set
> CONFIG_KERNEL_ELF=y
> CONFIG_BINFMT_ELF=y
> CONFIG_BINFMT_MISC=y
> # CONFIG_CMDLINE_BOOL is not set
>
> #
> # Bus options
> #
> # CONFIG_PCI is not set
> # CONFIG_PCI_DOMAINS is not set
>
> #
> # PCMCIA/CardBus support
> #
> CONFIG_PCMCIA=y
> # CONFIG_PCMCIA_DEBUG is not set
> CONFIG_TCIC=y
>
> #
> # Advanced setup
> #
> # CONFIG_ADVANCED_OPTIONS is not set
>
> #
> # Default settings for advanced configuration options are used
> #
> CONFIG_HIGHMEM_START=0xfe000000
> CONFIG_LOWMEM_SIZE=0x30000000
> CONFIG_KERNEL_START=0xc0000000
> CONFIG_TASK_SIZE=0x80000000
> CONFIG_BOOT_LOAD=0x00400000
>
> #
> # Device Drivers
> #
>
> #
> # Generic Driver Options
> #
> CONFIG_PREVENT_FIRMWARE_BUILD=y
> # CONFIG_FW_LOADER is not set
>
> #
> # Memory Technology Devices (MTD)
> #
> # CONFIG_MTD is not set
>
> #
> # Parallel port support
> #
> # CONFIG_PARPORT is not set
>
> #
> # Plug and Play support
> #
>
> #
> # Block devices
> #
> # CONFIG_BLK_DEV_FD is not set
> CONFIG_BLK_DEV_LOOP=y
> # CONFIG_BLK_DEV_CRYPTOLOOP is not set
> CONFIG_BLK_DEV_RAM=y
> CONFIG_BLK_DEV_RAM_SIZE=4096
> CONFIG_BLK_DEV_INITRD=y
> # CONFIG_LBD is not set
>
> #
> # ATA/ATAPI/MFM/RLL support
> #
> # CONFIG_IDE is not set
>
> #
> # SCSI device support
> #
> # CONFIG_SCSI is not set
>
> #
> # Multi-device support (RAID and LVM)
> #
> # CONFIG_MD is not set
>
> #
> # Fusion MPT device support
> #
>
> #
> # IEEE 1394 (FireWire) support
> #
> # CONFIG_IEEE1394 is not set
>
> #
> # I2O device support
> #
>
> #
> # Macintosh device drivers
> #
>
> #
> # Networking support
> #
> # CONFIG_NET is not set
> # CONFIG_NETPOLL is not set
> # CONFIG_NET_POLL_CONTROLLER is not set
>
> #
> # ISDN subsystem
> #
>
> #
> # Telephony Support
> #
> # CONFIG_PHONE is not set
>
> #
> # Input device support
> #
> CONFIG_INPUT=y
>
> #
> # Userland interfaces
> #
> CONFIG_INPUT_MOUSEDEV=y
> # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> # CONFIG_INPUT_JOYDEV is not set
> # CONFIG_INPUT_TSDEV is not set
> # CONFIG_INPUT_EVDEV is not set
> # CONFIG_INPUT_EVBUG is not set
>
> #
> # Input I/O drivers
> #
> # CONFIG_GAMEPORT is not set
> CONFIG_SOUND_GAMEPORT=y
> # CONFIG_SERIO is not set
> # CONFIG_SERIO_I8042 is not set
>
> #
> # Input Device Drivers
> #
> # CONFIG_INPUT_KEYBOARD is not set
> # CONFIG_INPUT_MOUSE is not set
> # CONFIG_INPUT_JOYSTICK is not set
> # CONFIG_INPUT_TOUCHSCREEN is not set
> # CONFIG_INPUT_MISC is not set
>
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_VT_CONSOLE=y
> CONFIG_HW_CONSOLE=y
> # CONFIG_SERIAL_NONSTANDARD is not set
>
> #
> # Serial drivers
> #
> # CONFIG_SERIAL_8250 is not set
>
> #
> # Non-8250 serial port support
> #
> # CONFIG_SERIAL_CPM is not set
> CONFIG_UNIX98_PTYS=y
> # CONFIG_LEGACY_PTYS is not set
> # CONFIG_QIC02_TAPE is not set
>
> #
> # IPMI
> #
> CONFIG_IPMI_HANDLER=y
> # CONFIG_IPMI_PANIC_EVENT is not set
> CONFIG_IPMI_DEVICE_INTERFACE=y
> # CONFIG_IPMI_SI is not set
> CONFIG_IPMI_WATCHDOG=y
>
> #
> # Watchdog Cards
> #
> CONFIG_WATCHDOG=y
> # CONFIG_WATCHDOG_NOWAYOUT is not set
>
> #
> # Watchdog Device Drivers
> #
> CONFIG_SOFT_WATCHDOG=y
> # CONFIG_NVRAM is not set
> # CONFIG_GEN_RTC is not set
> # CONFIG_DTLK is not set
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
>
> #
> # Ftape, the floppy tape device driver
> #
> # CONFIG_FTAPE is not set
> # CONFIG_AGP is not set
> # CONFIG_DRM is not set
>
> #
> # PCMCIA character devices
> #
> # CONFIG_SYNCLINK_CS is not set
> # CONFIG_RAW_DRIVER is not set
>
> #
> # I2C support
> #
> # CONFIG_I2C is not set
>
> #
> # Dallas's 1-wire bus
> #
> # CONFIG_W1 is not set
>
> #
> # Misc devices
> #
>
> #
> # Multimedia devices
> #
> # CONFIG_VIDEO_DEV is not set
>
> #
> # Digital Video Broadcasting Devices
> #
>
> #
> # Graphics support
> #
> # CONFIG_FB is not set
>
> #
> # Console display driver support
> #
> CONFIG_VGA_CONSOLE=y
> CONFIG_MDA_CONSOLE=y
> CONFIG_DUMMY_CONSOLE=y
>
> #
> # Sound
> #
> # CONFIG_SOUND is not set
>
> #
> # USB support
> #
>
> #
> # USB Gadget Support
> #
> # CONFIG_USB_GADGET is not set
>
> #
> # File systems
> #
> CONFIG_EXT2_FS=y
> # CONFIG_EXT2_FS_XATTR is not set
> CONFIG_EXT3_FS=y
> CONFIG_EXT3_FS_XATTR=y
> CONFIG_EXT3_FS_POSIX_ACL=y
> # CONFIG_EXT3_FS_SECURITY is not set
> CONFIG_JBD=y
> # CONFIG_JBD_DEBUG is not set
> CONFIG_FS_MBCACHE=y
> CONFIG_REISERFS_FS=y
> # CONFIG_REISERFS_CHECK is not set
> CONFIG_REISERFS_PROC_INFO=y
> # CONFIG_REISERFS_FS_XATTR is not set
> CONFIG_JFS_FS=y
> # CONFIG_JFS_POSIX_ACL is not set
> CONFIG_JFS_DEBUG=y
> # CONFIG_JFS_STATISTICS is not set
> CONFIG_FS_POSIX_ACL=y
> # CONFIG_XFS_FS is not set
> CONFIG_MINIX_FS=y
> CONFIG_ROMFS_FS=y
> CONFIG_QUOTA=y
> # CONFIG_QFMT_V1 is not set
> CONFIG_QFMT_V2=y
> CONFIG_QUOTACTL=y
> CONFIG_AUTOFS_FS=y
> CONFIG_AUTOFS4_FS=y
>
> #
> # CD-ROM/DVD Filesystems
> #
> CONFIG_ISO9660_FS=y
> CONFIG_JOLIET=y
> CONFIG_ZISOFS=y
> CONFIG_ZISOFS_FS=y
> CONFIG_UDF_FS=y
> CONFIG_UDF_NLS=y
>
> #
> # DOS/FAT/NT Filesystems
> #
> CONFIG_FAT_FS=y
> CONFIG_MSDOS_FS=y
> CONFIG_VFAT_FS=y
> CONFIG_FAT_DEFAULT_CODEPAGE=437
> CONFIG_FAT_DEFAULT_IOCHARSET="n"
> # CONFIG_NTFS_FS is not set
>
> #
> # Pseudo filesystems
> #
> CONFIG_PROC_FS=y
> CONFIG_PROC_KCORE=y
> CONFIG_SYSFS=y
> # CONFIG_DEVPTS_FS_XATTR is not set
> CONFIG_TMPFS=y
> # CONFIG_HUGETLB_PAGE is not set
> CONFIG_RAMFS=y
>
> #
> # Miscellaneous filesystems
> #
> # CONFIG_HFSPLUS_FS is not set
> # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
> CONFIG_CRAMFS=y
> CONFIG_VXFS_FS=y
> # CONFIG_HPFS_FS is not set
> # CONFIG_QNX4FS_FS is not set
> CONFIG_SYSV_FS=y
> CONFIG_UFS_FS=y
>
> #
> # Partition Types
> #
> CONFIG_PARTITION_ADVANCED=y
> # CONFIG_ACORN_PARTITION is not set
> CONFIG_OSF_PARTITION=y
> # CONFIG_AMIGA_PARTITION is not set
> # CONFIG_ATARI_PARTITION is not set
> CONFIG_MAC_PARTITION=y
> CONFIG_MSDOS_PARTITION=y
> CONFIG_BSD_DISKLABEL=y
> CONFIG_MINIX_SUBPARTITION=y
> CONFIG_SOLARIS_X86_PARTITION=y
> CONFIG_UNIXWARE_DISKLABEL=y
> # CONFIG_LDM_PARTITION is not set
> CONFIG_SGI_PARTITION=y
> # CONFIG_ULTRIX_PARTITION is not set
> CONFIG_SUN_PARTITION=y
> # CONFIG_EFI_PARTITION is not set
>
> #
> # Native Language Support
> #
> CONFIG_NLS=y
> CONFIG_NLS_DEFAULT="iso8859-1"
> CONFIG_NLS_CODEPAGE_437=y
> CONFIG_NLS_CODEPAGE_737=y
> CONFIG_NLS_CODEPAGE_775=y
> CONFIG_NLS_CODEPAGE_850=y
> CONFIG_NLS_CODEPAGE_852=y
> CONFIG_NLS_CODEPAGE_855=y
> CONFIG_NLS_CODEPAGE_857=y
> CONFIG_NLS_CODEPAGE_860=y
> CONFIG_NLS_CODEPAGE_861=y
> CONFIG_NLS_CODEPAGE_862=y
> CONFIG_NLS_CODEPAGE_863=y
> CONFIG_NLS_CODEPAGE_864=y
> CONFIG_NLS_CODEPAGE_865=y
> CONFIG_NLS_CODEPAGE_866=y
> CONFIG_NLS_CODEPAGE_869=y
> CONFIG_NLS_CODEPAGE_936=y
> CONFIG_NLS_CODEPAGE_950=y
> CONFIG_NLS_CODEPAGE_932=y
> CONFIG_NLS_CODEPAGE_949=y
> CONFIG_NLS_CODEPAGE_874=y
> CONFIG_NLS_ISO8859_8=y
> CONFIG_NLS_CODEPAGE_1250=y
> CONFIG_NLS_CODEPAGE_1251=y
> # CONFIG_NLS_ASCII is not set
> CONFIG_NLS_ISO8859_1=y
> CONFIG_NLS_ISO8859_2=y
> CONFIG_NLS_ISO8859_3=y
> CONFIG_NLS_ISO8859_4=y
> CONFIG_NLS_ISO8859_5=y
> CONFIG_NLS_ISO8859_6=y
> CONFIG_NLS_ISO8859_7=y
> CONFIG_NLS_ISO8859_9=y
> CONFIG_NLS_ISO8859_13=y
> CONFIG_NLS_ISO8859_14=y
> CONFIG_NLS_ISO8859_15=y
> CONFIG_NLS_KOI8_R=y
> CONFIG_NLS_KOI8_U=y
> CONFIG_NLS_UTF8=y
>
> #
> # CPM2 Options
> #
>
> #
> # Library routines
> #
> # CONFIG_CRC_CCITT is not set
> CONFIG_CRC32=y
> # CONFIG_LIBCRC32C is not set
> CONFIG_ZLIB_INFLATE=y
>
> #
> # Kernel hacking
> #
> # CONFIG_DEBUG_KERNEL is not set
> # CONFIG_KGDB_CONSOLE is not set
>
> #
> # Security options
> #
> # CONFIG_SECURITY is not set
>
> #
> # Cryptographic options
> #
> # CONFIG_CRYPTO is not set
>
>
> Thanks,
> Best Regards,
> Alex
> -----Original Message-----
> From: miguel.valero at axxessit.no [mailto:miguel.valero at axxessit.no]
> Sent: Thursday, August 05, 2004 6:04 AM
> To: Povolotsky, Alexander
> Cc: linuxppc-embedded at lists.linuxppc.org
> Subject: Re: Has anybody successfuly run linux-2.6.8-rc2 (or any
> previous linu x 2.6 version) on MPC 82xx ?
>
>
> I have linux-2.6.7 running on both MPC8265 and MPC8280 based custom
> boards.
>
> Firstly, I think your problem may be that the u-boot overwrites the
> linux
> image file during decompression, because it is placed too low in memory
> (0x200000).
> Try first to set your u-boot environment loadaddr higher.
>
> 0x400000 works fine for linux-2.6.7, but another thing I see is that
> your
> linux image file is rather large (190c52 hex). My linux-2.6.7 uImage
> file is
> f10e9 hex, quite smaller.
> Has linux-2.6.8 grown so much ? or are you making the wrong image ? You
> should make uImage, I guess you are aware of that.
>
> Miguel
>
> "Povolotsky, Alexander" <Alexander.Povolotsky at marconi.com>
> Sent by: owner-linuxppc-embedded at lists.linuxppc.org
> 05.08.04 10:39
>
>
> To:"'linuxppc-embedded at lists.linuxppc.org'"
> <linuxppc-embedded at lists.linuxppc.org>
> cc: "'mcclintock at freescale.com'" <mcclintock at freescale.com>
> Subject: Has anybody successfuly run linux-2.6.8-rc2 or any previous
> linux
> 2.6 version on MPC82xx ?
>
>
> Hello,
>
> I have been told that the first linux 2.6 version, which should work
> on MPC
> 82xx is linux-6.8-rc2 ...?
> So I have cross-compiled "vanilla" linux-2.6.8-rc2 (using Cygwin with
> quite a few patches from Dan Kegel, Martin Schaffner and others to make
> cross-compiling work - except for netfilter code, which doesn't
> cross-compile on Cygwin and needs to be disabled, which I did) for ppc,
> 82xx and created uimage (used mkimage tool from u-boot-1.1.1, which I
> have
> built also on Cygwin with the latest Yuli Barcohen's patch). I have
> loaded
> this
> uimage onto PQ2 ADS witn MPC8270 (U-Boot version loaded on the PQ2 ADS
> flash is still 1.0.0.) and tried to run it with "bootm" - but it fails
> (resets)
> immediately after decompressing the image ... and I do not have 82xx
> back-end Jtag probe/debugger available to me to see what is
> happening...
>
> U-Boot 1.0.0 (Jan 30 2004 - 16:09:23)
> => tftpboot 200000 uimagenfs
> TFTP from server 172.16.240.200; our IP address is 172.16.119.3
> Filename 'uimagenfs'.
> Load address: 0x200000
> Loading: T
> #################################################################
>
> #################################################################
>
> #################################################################
>
> #################################################################
>          #############################################################
> done
> Bytes transferred = 1641554 (190c52 hex)
> =>bootm
>
> Has anybody successfuly run linux-2.6.8-rc2 (or previous linux 2.6
> version)on MPC 82xx ?
> If so, could you share with me ".config" file used ?
>
> On another more general subject - does Freescale (former Motorola) has
> a
> single focal point person who's charter is to promote Linux board
> support
> on Motorola development boards (aka Linux czar) - do you have his
> contact
> info ?
>
> I know that there were Linux OS Development Breakout Sessions SNDF
> (Smart
> Networks Developer Forum ) April,  2004 Dallas
> http://www.freescale.com/webapp/sps/site/overview.jsp?
> nodeId=02VS0llCc5pzMP5
> 51361587974
> So somebody should stand behind Linux development activity  at
> Freescale/
> Motorola (both IBM and HP do have dedicated Linux Labs and people
> working
> strictly on Linux ...) I guess ...
>
> Thanks,
> Best Regards,
> Alex
>
>

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/