balajee_78 at yahoo.com
Thu Aug 26 06:33:19 EST 2004
I am trying to use uboot to boot my target board based
on MPC8260 whose serial is defined on SMC2.
I changed the config and tried boot it.I get all the
uboot messages on the console but it would not accept
When i use the same board with SMC1 as console in
uboot it works fine.
(The board has both smc1 and smc2 connected to the
Any suggestions would be appreciated
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
More information about the Linuxppc-embedded