April 2006 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Sat Apr 1 00:36:20 EST 2006
Ending: Sun Apr 30 18:15:43 EST 2006
Messages: 274

• MPC83xx: CF access in True IDE mode   SIP COP 009
• Watchdog on MPC82xx   Bastos Fernandez Alexandre
• Watchdog on MPC82xx   Bastos Fernandez Alexandre
• Watchdog on MPC82xx   Bastos Fernandez Alexandre
• Watchdog on MPC82xx   Bastos Fernandez Alexandre
• Watchdog on MPC82xx   Bastos Fernandez Alexandre
• Watchdog on MPC82xx   Bastos Fernandez Alexandre
• Watchdog on MPC82xx [SOLVED]   Bastos Fernandez Alexandre
• freescale lite 5200 board and kernel 2.6   Domenico Andreoli
• freescale lite 5200 board and kernel 2.6   Domenico Andreoli
• freescale lite 5200 board and kernel 2.6   Domenico Andreoli
• freescale lite 5200 board and kernel 2.6   Domenico Andreoli
• USB-Hostcontroller-Support for MPC875   Josef Angermeier
• linux 2.4.25: loading usbcore.o gives segmentation fault   Josef Angermeier
• USB working on MPC875/885 ?   Josef Angermeier
• Upgrading cramfs root file system   Antonio Di Bacco
• slram   Antonio Di Bacco
• Accessing physical memory   Antonio Di Bacco
• PRAMFS   Antonio Di Bacco
• hdlc_enet   Antonio Di Bacco
• Upgrading cramfs root file system   Antonio Di Bacco
• Upgrading cramfs root file system while running (DENX wrote that is not possible)   Antonio Di Bacco
• Upgrading cramfs root file system while running (DENX wrote that is not possible)   Antonio Di Bacco
• Upgrading cramfs root file system while running (DENX wrote that is not possible)   Antonio Di Bacco
• Upgrading cramfs root file system while running (DENX wrote that is not possible)   Antonio Di Bacco
• Upgrading cramfs root file system while running (DENX wrote that is not possible)I   Antonio Di Bacco
• Cardctl Netgear Problem   Miguel Bello
• [PATCH] Add 85xx CDS to arch/powerpc   Arnd Bergmann
• Accessing physical memory   Arnd Bergmann
• where do applications get loaded in virtual memory on a 4xx?   Ralph Blach
• How do you make linux 2.6.10 U-Boot aware?   Steven Blakeslee
• NAND and JFFS2 supports in Linux 2.4   Jaap-Jan Boor
• problem with watchdog/reboot MPC5200   Jaap-Jan Boor
• Kernel panic on mpc852.   Gautam Borad
• [PATCH] ppc32: Fix string comparing in platform_notify_map   Vitaly Bordug
• [PATCH 1/2] PAL: Support of the fixed PHY   Vitaly Bordug
• [PATCH 2/2] FS_ENET: use PAL for mii management   Vitaly Bordug
• [PATCH] ppc32: Support for Freescale PQ2FADS   Vitaly Bordug
• New fs_enet driver : filling platform_data   Vitaly Bordug
• kernel 2.6.15: cpm_uart driver broken?   Vitaly Bordug
• kernel 2.6.15: cpm_uart driver broken?   Vitaly Bordug
• kernel 2.6.15: cpm_uart driver broken?   Vitaly Bordug
• USB-Hostcontroller-Support for MPC875   Vitaly Bordug
• [PATCH 1/4] ppc32: odd fixes and improvements in ppc_sys   Vitaly Bordug
• [PATCH 2/4] CPM_UART: Convert to use platform devices   Vitaly Bordug
• [PATCH 3/4] PPC32: Update board-specific code of the CPM UART users   Vitaly Bordug
• [PATCH 4/4] ppc32 CPM_UART: Fixed odd address translations   Vitaly Bordug
• [PATCH] fix cpm_uart driver for PQ1...   Vitaly Bordug
• [PATCH] ppc32 CPM_UART: fixes and improvements   Vitaly Bordug
• [PATCH] ppc32 CPM_UART: Fixed break send on SCC   Vitaly Bordug
• [PATCH] ppc32 CPM_UART: fixes and improvements   Vitaly Bordug
• NAND and JFFS2 supports in Linux 2.4   Josh Boyer
• about ppc <asm/string.h>   Becky Bruce
• PPC exception 0x320   Becky Bruce
• PPC exception 0x320   Becky Bruce
• Porting new MPC5200 based Board to linux kernel   Amir Bukhari
• Porting new MPC5200 based Board to linux kernel   Amir Bukhari
• Create permanent mapping from PCI bus to region of physical memory   Mark Chambers
• kernel access of bad area, sig: 11 ( mpc852t)   Mark Chambers
• kernel access of bad area, sig: 11 ( mpc852t)   Mark Chambers
• Port Linux w/ mbxboot to PPCBoot system   Jessica Chen
• Port Linux w/ mbxboot to PPCBoot system   Jessica Chen
• root file system mounted via NFS - retry?   Brent Cook
• problem booting custom board   Joachim Denil
• Porting new MPC5200 based Board to linux kernel   Wolfgang Denk
• Porting new MPC5200 based Board to linux kernel   Wolfgang Denk
• U-Boot on 440EP Bamboo board, anybody succeed?   Wolfgang Denk
• Freescale 8272ADS configuration   Wolfgang Denk
• Port Linux w/ mbxboot to PPCBoot system   Wolfgang Denk
• Upgrading cramfs root file system while running (DENX wrote that is not possible)   Wolfgang Denk
• Upgrading cramfs root file system while running (DENX wrote that is not possible)   Wolfgang Denk
• Upgrading cramfs root file system while running (DENX wrote that is not possible)   Wolfgang Denk
• Kernel panic on mpc852.   Wolfgang Denk
• u-boot.bin   Wolfgang Denk
• freescale lite 5200 board and kernel 2.6   Andrew Dennison
• Slab errors on 4xx (STB04)   Andre Draszik
• Slab errors on 4xx (STB04)   Andre Draszik
• Slab errors on 4xx (STB04)   Andre Draszik
• IIC troubles w/ ppc4xx (STB04)   Andre Draszik
• IIC troubles w/ ppc4xx (STB04)   Andre Draszik
• IIC troubles w/ ppc4xx (STB04)   Andre Draszik
• Slab errors on 4xx (STB04)   Roland Dreier
• Upgrading cramfs root file system while running (DENX wrote that is not possible)   Stefan Eletzhofer
• NAND and JFFS2 supports in Linux 2.4   Jörn Engel
• [PATCH] ppc32: Support for Freescale PQ2FADS   Wade Farnsworth
• [PATCH] ppc32: Support for Freescale PQ2FADS   Wade Farnsworth
• [PATCH] ppc32: Support for Freescale PQ2FADS   Wade Farnsworth
• [PATCH] ppc32: Support for Freescale PQ2FADS   Wade Farnsworth
• Kernel for MPC Lite 5200 will not compile   Matthias Fechner
• Kernel for MPC Lite 5200 will not compile   Matthias Fechner
• freescale lite 5200 board and kernel 2.6   Matthias Fechner
• freescale lite 5200 board and kernel 2.6   Matthias Fechner
• freescale lite 5200 board and kernel 2.6   Matthias Fechner
• freescale lite 5200 board and kernel 2.6   Matthias Fechner
• [PATCH] Add 85xx CDS to arch/powerpc   Andy Fleming
• of_platform bus?   Kumar Gala
• [PATCH] Add 85xx CDS to arch/powerpc   Kumar Gala
• GPIO endianness on MPC8349   Kumar Gala
• MPC83xx: CF access in True IDE mode   Kumar Gala
• Linux kernel for MPC834X platform   Kumar Gala
• Linux kernel for MPC834X platform   Kumar Gala
• Linux kernel for MPC834X platform   Kumar Gala
• Rebuilding FS MDS 8349 BSP & JFFS2 integration   Kumar Gala
• u-boot.bin   Kumar Gala
• problem with watchdog/reboot MPC5200   Arno Geissel
• problem with watchdog/reboot MPC5200   Arno Geissel
• problem with watchdog/reboot MPC5200   Arno Geissel
• RTC/I2C on 82xx with Linux 2.6.x   Claus Gindhart
• RTC/I2C on 82xx with Linux 2.6.x   Mark A. Greer
• va_copy() support for powerpc   HappyPhot
• about ppc <asm/string.h>   HappyPhot
• mpc5200b and floating point   Sascha Hauer
• mpc5200b and floating point   Sascha Hauer
• mpc5200b and floating point   Sascha Hauer
• MPC5200 + LocalPlus Bus + memcpy   Sascha Hauer
• MPC5200 + LocalPlus Bus + memcpy   Sascha Hauer
• Create permanent mapping from PCI bus to region of physical memory   David Hawkins
• Create permanent mapping from PCI bus to region of physical memory   David Hawkins
• Create permanent mapping from PCI bus to region of physical memory   David Hawkins
• u-boot.bin   Eric Heim
• Create permanent mapping from PCI bus to region of physical memory   Howard, Marc
• Create permanent mapping from PCI bus to region of physical memory   Howard, Marc
• Create permanent mapping from PCI bus to region of physical memory   Howard, Marc
• How do you make linux 2.6.10 U-Boot aware?   Howard, Marc
• PPC Linux support for Tundra TSI148   Gerhard Jaeger
• PPC Linux support for Tundra TSI148   Gerhard Jaeger
• Trouble with 2.6.16 on ppc8xx ?   David Jander
• kernel 2.6.15: cpm_uart driver broken?   David Jander
• kernel 2.6.15: cpm_uart driver broken?   David Jander
• kernel 2.6.15: cpm_uart driver broken?   David Jander
• kernel 2.6.15: cpm_uart driver broken?   David Jander
• Upgrading cramfs root file system while running (DENX wrote that is not possible)   David Jander
• [PATCH] fix cpm_uart driver for PQ1...   David Jander
• Linux 2.6 sources for MPC852T processor   David Jander
• Linux 2.6 sources for MPC852T processor   David Jander
• MCC 8260 problem   Abas Javadtalab
• The behavior of L2 cache controller for PPC440   Shawn Jin
• Can't get serial SMC1 and SMC2 working together   Douglas Johnsson
• question about Linux 2.6 with Xilinx ML-403   Andrei Konovalov
• Xilinx SysACE drivers for Linux 2.4   Andrei Konovalov
• U-Boot on 440EP Bamboo board, anybody succeed?   Andriy Korud
• CF card connection to PPC CPUs   Andriy Korud
• Rebuilding FS MDS 8349 BSP & JFFS2 integration   Krawczuk, Victor
• PPC405 support in later 2.4.x kernels   Krishnan
• Freescale 8272ADS configuration   Krishnan
• Upgrading cramfs root file system   Wojciech Kromer
• Upgrading cramfs root file system   Wojciech Kromer
• RTC/I2C on 82xx with Linux 2.6.x   Laurent Lagrange
• NAND and JFFS2 supports in Linux 2.4   Laurent Lagrange
• NAND and JFFS2 supports in Linux 2.4   Laurent Lagrange
• mpc5200b and floating point   Roger Larsson
• question about Linux 2.6 with Xilinx ML-403   Grant Likely
• Xilinx Virtex-2 PRO FPGA ppc 405 on ML310 board   Grant Likely
• question about Linux 2.6 with Xilinx ML-403   Grant Likely
• Xilinx Virtex-2 PRO FPGA ppc 405 on ML310 board   Grant Likely
• question about Linux 2.6 with Xilinx ML-403   Grant Likely
• question about Linux 2.6 with Xilinx ML-403   Grant Likely
• Xilinx Virtex-2 PRO FPGA ppc 405 on ML310 board   Grant Likely
• question about Linux 2.6 with Xilinx ML-403   Grant Likely
• Xilinx Virtex-2 PRO FPGA ppc 405 on ML310 board   Grant Likely
• Xilinx Virtex-2 PRO FPGA ppc 405 on ML310 board   Grant Likely
• question about Linux 2.6 with Xilinx ML-403   Grant Likely
• help. a question on "make menuconfig"   Ming Liu
• [PATCH] Add 85xx CDS to arch/powerpc   Jon Loeliger
• Anybody applied the patch "Add 85xx CDS to arch/powerpc" on the 2.6.16. I failed to apply it:-(   Jon Loeliger
• mpc5200b and floating point   Dan Malek
• kernel 2.6.15: cpm_uart driver broken?   Dan Malek
• kernel 2.6.15: cpm_uart driver broken?   Dan Malek
• Linux 2.6 sources for MPC852T processor   Dan Malek
• root file system mounted via NFS - retry?   Jarno Manninen
• question about Linux 2.6 with Xilinx ML-403   Martin, Tim
• question about Linux 2.6 with Xilinx ML-403   Martin, Tim
• PPC Linux support for Tundra TSI148   Martin, Tim
• PPC Linux support for Tundra TSI148   Martin, Tim
• Linux kernel for MPC834X platform   Stefan Meyer
• checking posting: ignore please   Stefan Meyer
• Linux kernel for MPC834X platform   Stefan Meyer
• Linux kernel for MPC834X platform   Stefan Meyer
• kernel access of bad area, sig: 11 ( mpc852t)   Akshay Mishra
• kernel access of bad area, sig: 11 ( mpc852t)   Akshay Mishra
• question about Linux 2.6 with Xilinx ML-403   Rick Moleres
• Kernel for MPC Lite 5200 will not compile   Sylvain Munaut
• freescale lite 5200 board and kernel 2.6   Sylvain Munaut
• freescale lite 5200 board and kernel 2.6   Sylvain Munaut
• Freescale 8272ADS configuration   Carlos Munoz
• Linux 2.6 sources for MPC852T processor   Chandrasekhar Nagaraj
• Upgrading cramfs root file system while running (DENX wrote that is not possible)   Tolunay Orkun
• Upgrading cramfs root file system while running (DENX wrote that is not possible)   Tolunay Orkun
• Upgrading cramfs root file system while running (DENX wrote that is not possible)   Tolunay Orkun
• Upgrading cramfs root file system while running (DENX wrote that is not possible)   Tolunay Orkun
• PPC 405GPr support in linux 2.4.32   Tolunay Orkun
• Watchdog on MPC82xx   Pelton, Dave
• New fs_enet driver : filling platform_data   Laurent Pinchart
• New fs_enet driver : filling platform_data   Laurent Pinchart
• Can't get serial SMC1 and SMC2 working together   Kenneth Poole
• RTC/I2C problems   Kenneth Poole
• kernel 2.6.15: cpm_uart driver broken?   Kenneth Poole
• kernel access of bad area, sig: 11 ( mpc852t)   Kenneth Poole
• kernel 2.6.15: cpm_uart driver broken?   Kenneth Poole
• kernel 2.6.15: cpm_uart driver broken?   Kenneth Poole
• PPC 405GPr support in linux 2.4.32   Matt Porter
• Watchdog on MPC82xx   Mike Rapoport
• [PATCH] Add support for Freescale MEDIA5200 MPC5200 based platform   John Rigby
• freescale lite 5200 board and kernel 2.6   John Rigby
• CF card connection to PPC CPUs   Travis B. Sawyer
• TI1520 Cardbus with CF troubles   Travis B. Sawyer
• root file system mounted via NFS - retry?   Randy Smith
• root file system mounted via NFS - retry?   Randy Smith
• Re-configuring busybox that comes with DENX's ELDK SELF   Randy Smith
• Accessing physical memory   Fillod Stephane
• scc in hdlc mode linux-2.4 device driver for MPC8247   Nethi venkata Subbarao
• question about Linux 2.6 with Xilinx ML-403   Chang Sun
• where do applications get loaded in virtual memory on a 4xx?   Eugene Surovegin
• Slab errors on 4xx (STB04)   Eugene Surovegin
• IIC troubles w/ ppc4xx (STB04)   Eugene Surovegin
• IIC troubles w/ ppc4xx (STB04)   Eugene Surovegin
• [PATCH] ppc32: add 440GX erratum 440_43 workaround   Eugene Surovegin
• How do you make linux 2.6.10 U-Boot aware?   Eugene Surovegin
• PPC 405GPr support in linux 2.4.32   Eugene Surovegin
• PPC 405GPr support in linux 2.4.32   Eugene Surovegin
• PPC 405GPr support in linux 2.4.32   Eugene Surovegin
• Porting new MPC5200 based Board to linux kernel   Hans Thielemans
• problem with watchdog/reboot MPC5200   Joakim Tjernlund
• Watchdog on MPC82xx   Rune Torgersen
• kernel access of bad area, sig: 11 ( mpc852t)   Rune Torgersen
• Trouble with 2.6.16 on ppc8xx ?   Marcelo Tosatti
• [PATCH 4/4] ppc32 CPM_UART: Fixed odd address translations   Marcelo Tosatti
• MPC5200 + LocalPlus Bus + memcpy   Andrey Volkov
• MPC5200 + LocalPlus Bus + memcpy   Andrey Volkov
• [ANNOUNCE] socket-can for linux   Andrey Volkov
• GPIO endianness on MPC8349   Ben Warren
• GPIO endianness on MPC8349   Ben Warren
• BDI-2000 Config file for MPC8349 eval board   Ben Warren
• mpc5200b and floating point   White
• Upgrading cramfs root file system   White
• Virtex-4 FX12 Mini-Module support   Aidan Williams
• Xilinx Virtex-2 PRO FPGA ppc 405 on ML310 board   Aidan Williams
• Xilinx Virtex-2 PRO FPGA ppc 405 on ML310 board   Aidan Williams
• Xilinx Virtex-2 PRO FPGA ppc 405 on ML310 board   Aidan Williams
• Xilinx Virtex-2 PRO FPGA ppc 405 on ML310 board   Aidan Williams
• Choices of 2.4 Kernel for PPC   Stephen Williams
• Xilinx SysACE drivers for Linux 2.4   Stephen Williams
• PPC 405GPr support in linux 2.4.32   Stephen Williams
• PPC 405GPr support in linux 2.4.32   Stephen Williams
• PPC 405GPr support in linux 2.4.32   Stephen Williams
• PPC 405GPr support in linux 2.4.32   Stephen Williams
• Xilinx Virtex-2 PRO FPGA ppc 405 on ML310 board   Vincent Winstead
• Xilinx Virtex-2 PRO FPGA ppc 405 on ML310 board   Vincent Winstead
• Xilinx Virtex-2 PRO FPGA ppc 405 on ML310 board   Vincent Winstead
• of_platform bus?   Li Yang-r58472
• Freescale 8272ADS configuration   Alex Zeffertt
• QUICC Engine ATM driver   Alex Zeffertt
• Upgrading cramfs root file system while running (DENX wrote that is not possible)   antonio.dibacco
• Oops: kernel access of bad area, sig: 11 ( mpc852t)   gautam borad
• Large Page Support, 2.6 kernel , PPC440   moris dong
• Porting new MPC5200 based Board to linux kernel   bukhari at fzi.de
• Check it out   jefferxu at gmail.com
• Check it out   vijesh.vh at gmail.com
• init issue on linux 2.4 devel and busybox   jean-francois.hasson at hispano-suiza-sa.com
• Linux 2.4 devel on ML403 board : problem with prompt   jean-francois.hasson at hispano-suiza-sa.com
• PPC exception 0x320   jeanwelly
• PPC exception 0x320   jeanwelly
• Question about porting linux2.6 on mpc860T   bharathi kandimalla
• Anybody applied the patch "Add 85xx CDS to arch/powerpc" on the 2.6.16. I failed to apply it:-(   fengcheng lu
• ethernet not workingfor u-boot on mpc8280 rattler   vikas mak
• Accessing physical memory   dwh at mmarray.org
• SBC 8245 problem with linux kernel PCI bus configuration   kevin morizur
• SBC 8245 which architecture on kernel configuration ?   kevin morizur
• RTC/I2C problems   kevin morizur
• post to the list   stone
• question about Linux 2.6 with Xilinx ML-403   yding
• question about Linux 2.6 with Xilinx ML-403   yding
• Can't get serial SMC1 and SMC2 working together   Björn Östby
• I want to use SCC3 as ethernet with SMC1 as console(mpc8xx)   김영남

Last message date: Sun Apr 30 18:15:43 EST 2006
Archived on: Mon Jul 23 18:01:32 EST 2007

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...