January 2006 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Sun Jan 1 03:34:50 EST 2006
Ending: Tue Jan 31 23:36:25 EST 2006
Messages: 382

• [PATCH 8/8] Add support for Xilinx ML403 reference design   David H. Lynch Jr.
• [PATCH 8/8] Add support for Xilinx ML403 reference design   Grant Likely
• Cross Compiling driver for PPC   venkatajagadeesh p
• ELDK 4.0   HappyPhot
• VFS: Cannot open root device "31:03" or unknown-block(31,3)   HappyPhot
• VFS: Cannot open root device "31:03" or unknown-block(31,3)   David Jander
• [PATCH 8/8] Add support for Xilinx ML403 reference design   Grant Likely
• VFS: Cannot open root device "31:03" or unknown-block(31,3)   HappyPhot
• Custom Driver   Brett McNerney
• Custom Driver   Grant Likely
• [PATCH 8/8] Add support for Xilinx ML403 reference design   Grant Likely
• [PATCH 8/8] Add support for Xilinx ML403 reference design   Paula Saameño
• [PATCH 8/8] Add support for Xilinx ML403 reference design   Grant Likely
• [PATCH 8/8] Add support for Xilinx ML403 reference design   Paula Saameño
• [PATCH 8/8] Add support for Xilinx ML403 reference design   Grant Likely
• Custom Driver   andreas_schmidt at ifm-electronic.com
• "argument list too long"   Noé SERRES
• "argument list too long"   Wolfgang Denk
• [RFC] Pico E12 (Xilinx V4) patches to 2.6.15   David H. Lynch Jr.
• Problems starting /init   David H. Lynch Jr.
• question about arch_initcall()   Nathael Pajani
• Segmentation fault with X.org and Coral-P drivers   Matthias Transier
• "argument list too long"   Stefan Eletzhofer
• "argument list too long"   Wolfgang Denk
• Cross Compiling driver for PPC   Nathael Pajani
• "argument list too long"   Stefan Eletzhofer
• question about arch_initcall()   Kumar Gala
• Segmentation fault with X.org and Coral-P drivers   Wolfgang Denk
• Segmentation fault with X.org and Coral-P drivers   Matthias Transier
• Segmentation fault with X.org and Coral-P drivers   Matthias Transier
• Segmentation fault with X.org and Coral-P drivers   Wolfgang Denk
• Segmentation fault with X.org and Coral-P drivers   Wolfgang Denk
• powerpc vs ppc build   Jeff Angielski
• Problems starting /init   David H. Lynch Jr.
• RESEND:[RFC] Pico E12 (Xilinx V4) patches to 2.6.15   David H. Lynch Jr.
• RESEND:Problems starting /init   David H. Lynch Jr.
• Problems starting /init   Geoff Thorpe
• Porting of Linux on MPC8260 custom build board   batsayan.das at tcs.com
• [PATCH] boot/common/util.S: Put flush_{instruction, data}_cache back in .relocate_code section   Paul Janzen
• Porting of Linux on MPC8260 custom build board   Sinan Akman
• mmap   Brett McNerney
• Porting of Linux on MPC8260 custom build board   Heiko Schocher
• VFS: Cannot open root device "31:03" or unknown-block(31,3)   David Jander
• powerpc vs ppc build   David Jander
• mmap   Fillod Stephane
• powerpc vs ppc build   Arnd Bergmann
• [CFT 13/29] Add of_platform_bus_type probe and remove methods   Russell King
• [CFT 14/29] Add vio_bus_type probe and remove methods   Russell King
• [PATCH] boot/common/util.S: Put flush_{instruction, data}_cache back in .relocate_code section   Tom Rini
• [PATCH] fix ML300 zImage in 2.6.15   Grant Likely
• io.h question   mcnernbm at notes.udayton.edu
• io.h question   Andrei Konovalov
• How to compile freescale example programs using eldk?   zengshuai at sogou.com
• Help need: Porting Linux to PQ2FADS_ZU board   zengshuai at sogou.com
• [PM-SPAM] Help need: Porting Linux to PQ2FADS_ZU board   KokHow Teh
• How to compile freescale example programs using eldk?   Wolfgang Denk
• Help need: Porting Linux to PQ2FADS_ZU board   Wolfgang Denk
• Help on LXT971 eth initialization   batsayan.das at tcs.com
• io.h question   Arnd Bergmann
• How to enable PHY   batsayan.das at tcs.com
• How to enable PHY   Mark Chambers
• How to enable PHY   Alex Zeffertt
• VFS: Cannot open root device "31:03" or unknown-block(31,3)   HappyPhot
• VFS: Cannot open root device "31:03" or unknown-block(31,3)   David Jander
• OOPS!!! - Help.   Jayaprakash Shanmugam
• [PATCH] Big combined patch for ml403 with OCP, ENET.   Jan Vermeulen (Mind)
• VFS: Cannot open root device "31:03" or unknown-block(31,3)   Wolfgang Denk
• Booting from RAM Disk   Matt Jerdonek
• Booting from RAM Disk   Matt Jerdonek
• Custom Driver   Grant Likely
• How to build the zImage.prep was Re: Bug#345424 acknowledged by developer (Bug#345424: fixed in linux-2.6 2.6.15-1)   Grant Likely
• [Fwd: Re: RESEND:[RFC] Pico E12 (Xilinx V4) patches to 2.6.15]   Grant Likely
• Booting from RAM Disk   David H. Lynch Jr.
• Booting from RAM Disk   Grant Likely
• RESEND:[RFC] Pico E12 (Xilinx V4) patches to 2.6.15   David H. Lynch Jr.
• FEC CONFIG_FEC_PACKETHOOK   feng
• FEC CONFIG_FEC_PACKETHOOK   feng
• Help on LXT971 eth initialization   KS Soumya-ask067
• Cardmgr Prism Problem   Miguel Bello
• How to build the zImage.prep was Re: Bug#345424 acknowledged by developer (Bug#345424: fixed in linux-2.6 2.6.15-1)   Sebastian Heutling
• Booting from RAM Disk   David H. Lynch Jr.
• Questoin about stable kernel version for 405ep   종윤 임
• port linux to prpmc board   siman
• Cardmgr Prism Problem   Marcelo Tosatti
• [RFC] Patches for Xilinx UartLite to 2.6.15   David H. Lynch Jr.
• FEC CONFIG_FEC_PACKETHOOK   feng
• [PATCH 00/10] Xilinx Virtex-* updates   grant.likely at secretlab.ca
• [PATCH 02/10] Make Virtex-II Pro support generic for all Virtex devices   grant.likely at secretlab.ca
• [PATCH 01/10] Move xparameters.h into xilinx virtex device specific path   grant.likely at secretlab.ca
• [PATCH 05/10] Add Virtex-4 FX to cpu table   grant.likely at secretlab.ca
• [PATCH 03/10] Migrate Xilinx Vertex support from the OCP bus to the platfom bus.   grant.likely at secretlab.ca
• [PATCH 06/10] Add xparameters file for Xilinx ML403 reference design   grant.likely at secretlab.ca
• [PATCH 04/10] Migrate ML300 reference design to the platform bus   grant.likely at secretlab.ca
• [PATCH 07/10] Add support for Xilinx ML403 reference design   grant.likely at secretlab.ca
• [PATCH 08/10] ML300 & ML403 need embed_config.o linked in   grant.likely at secretlab.ca
• [PATCH 09/10] defconfigs for Xilinx ML300 and ML403 reference designs   grant.likely at secretlab.ca
• [PATCH 10/10] Bug fix for Xilinx silicon errata 213.   grant.likely at secretlab.ca
• VFS: Cannot open root device "31:03" or unknown-block(31,3)   David Jander
• io.h question   Fillod Stephane
• Badness in dma_alloc_init   Kalle Pokki
• io.h question   Arnd Bergmann
• Badness in dma_alloc_init   Aristeu Sergio Rozanski Filho
• VFS: Cannot open root device "31:03" or unknown-block(31,3)   Wolfgang Denk
• help needed:relocation truncated to fit: R_PPC_REL24 _init   zengshuai at sogou.com
• Badness in dma_alloc_init   Kalle Pokki
• Help with installing 2.6 kernel on Rattler PCI 8250   Sondre Garsjø
• Enable a PCMCIA Bluetooth card in custom MPC860 system   Lo Chun Chung
• Booting from RAM Disk   Grant Likely
• Enable PCMCIA Bluetooth in a custom MPC860 system   Lo Chun Chung
• mpc8260 fcc enet transmit time out   hubert.loewenguth
• Enable a PCMCIA Bluetooth card in custom MPC860 system   Vitaly Bordug
• RESEND:Problems starting /init   Shawn Jin
• Enable a PCMCIA Bluetooth card in custom MPC860 system   Lo Chun Chung
• mpc8260 fcc enet transmit time out   Ho Jeffrey-r26191
• mpc8260 fec enet transmit time out   atul.sabharwal at exgate.tek.com
• [Problem] linux 2.6.14 kernel hang up after the uImage uncompressed successfully   Jonathan Qiang
• Exceptin occurs after execute activate_mm()   happa at wmlab.csie.ncu.edu.tw
• patch add-of_platform_bus_type-probe-and-remove-methods.patch added to gregkh-2.6 tree   gregkh at suse.de
• patch add-vio_bus_type-probe-and-remove-methods.patch added to gregkh-2.6 tree   gregkh at suse.de
• [Problem] linux 2.6.14 kernel hang up after the uImage uncompressed successfully   Wolfgang Denk
• [Problem] linux 2.6.14 kernel hang up after the uImage uncompressed successfully   Vitaly Bordug
• Enable a PCMCIA Bluetooth card in custom MPC860 system   Vitaly Bordug
• RES: [Problem] linux 2.6.14 kernel hang up after the uImage uncompressedsuccessfully   Sugeno, Otavio Isamu
• port linux to prpmc610 kernel-2.4.25 with MVME2100 patch   siman
• Error: Three ML403 boards   Paula Saameño
• Error: Three ML403 boards   Peter Ryser
• About MMU setting in MPC8245   happa at wmlab.csie.ncu.edu.tw
• Ethernet not initialized: Help req   batsayan.das at tcs.com
• Can ELDK 3.1.1 compile Linux 2.6 Kernel?   Lo Chun Chung
• Error: Three ML403 boards   Paula Saameño
• Memory and register adresses on PCI graphic chip.   powerpc440
• About MMU setting in MPC8245   Mark A. Greer
• Linux question   mcnernbm at notes.udayton.edu
• Ethernet not initialized: Help req   Wolfgang Denk
• Can ELDK 3.1.1 compile Linux 2.6 Kernel?   Wolfgang Denk
• [PATCH] Fix e500 oprofile support   Andy Fleming
• [PATCH] Fix e500 oprofile support   Kumar Gala
• [PATCH] Fix e500 oprofile support   Andy Fleming
• About MMU setting in MPC8245   happa at wmlab.csie.ncu.edu.tw
• Question about SPI based CAN controller for MPC8260   David Tao
• Ethernet not initialized: Help req   batsayan.das at tcs.com
• Can ELDK 3.1.1 compile Linux 2.6 Kernel?   Lo Chun Chung
• Question about SPI based CAN controller for MPC8260   Wolfgang Denk
• Ethernet not initialized: Help req   Wolfgang Denk
• [kernel-2.6.15] Fix PCI irq mapping for lite5200   Andrey Volkov
• Ethernet not initialized: Help req   Txema Lopez
• [kernel-2.6.15] Fix PCI irq mapping for lite5200   Sylvain Munaut
• [PATCH] powerpc: generalize PPC44x_PIN_SIZE   Matt Porter
• [PATCH 01/10] Move xparameters.h into xilinx virtex device specific path   Andrei Konovalov
• [PATCH 02/10] Make Virtex-II Pro support generic for all Virtex devices   Andrei Konovalov
• [PATCH 08/10] ML300 & ML403 need embed_config.o linked in   Andrei Konovalov
• Suggestions for a PPC440 board?   David Hawkins
• [PATCH] powerpc: Updated platforms that use gianfar to match driver   Kumar Gala
• PPC440EP/Yosemite PCI misbehavior   David Hawkins
• Can ELDK 3.1.1 compile Linux 2.6 Kernel?   Ron Kellam
• Help: MCC driver for mpc8260   s.maiti at tcs.com
• Help MCC driver   s.maiti at tcs.com
• Suggestions for a PPC440 board?   Travis B. Sawyer
• Help MCC driver   Mathieu Deschamps
• Help MCC driver   Manish Joshi
• Suggestions for a PPC440 board?   David Hawkins
• Artesyn PM/PPC 750 U-Boot/Linux support? Datasheet?   David Hawkins
• [PATCH] powerpc: Add FSL SOC library and setup code   Kumar Gala
• Artesyn PM/PPC 750 U-Boot/Linux support? Datasheet?   David Hawkins
• [PATCH 02/10] Make Virtex-II Pro support generic for all Virtex devices   Grant Likely
• [PATCH 00/10] Xilinx Virtex-* updates   Peter Korsgaard
• [PATCH 08/10] ML300 & ML403 need embed_config.o linked in   Peter Korsgaard
• [PATCH 03/10] Migrate Xilinx Vertex support from the OCP bus to the platfom bus.   Peter Korsgaard
• [PATCH 08/10] ML300 & ML403 need embed_config.o linked in   Matt Porter
• [PATCH 08/10] ML300 & ML403 need embed_config.o linked in   Grant Likely
• Help: MCC driver for mpc8260   s.maiti at tcs.com
• PPC440EP/Yosemite PCI misbehavior   David Hawkins
• [PATCH 00/10] Updated ML300 & ML403 patches   Grant Likely
• [PATCH 01/10] Move xparameters.h into xilinx virtex device specific path   Grant C. Likely
• [PATCH 02/10] Make Virtex-II Pro support generic for all Virtex devices   Grant C. Likely
• [PATCH 03/10] Migrate Xilinx Vertex support from the OCP bus to the platfom bus.   Grant C. Likely
• [PATCH 04/10] Migrate ML300 reference design to the platform bus   Grant C. Likely
• [PATCH 05/10] Add ML300 defconfig   Grant C. Likely
• [PATCH 06/10] Add Virtex-4 FX to cpu table   Grant C. Likely
• [PATCH 07/10] Add xparameters file for Xilinx ML403 reference design   Grant C. Likely
• [PATCH 08/10] Add support for Xilinx ML403 reference design   Grant C. Likely
• [PATCH 09/10] Bug fix for Xilinx silicon errata 213.   Grant C. Likely
• [PATCH 10/10] Add ML403 defconfig   Grant C. Likely
• ML300 & ML403 patches   Grant Likely
• [PATCH] powerpc: Add FSL SOC library and setup code   Olof Johansson
• [PATCH] powerpc: Add FSL SOC library and setup code   Eugene Surovegin
• [PATCH] powerpc: Add FSL SOC library and setup code   Olof Johansson
• [PATCH] powerpc: Add FSL SOC library and setup code   Kumar Gala
• Problems starting /sbin/init   David H. Lynch Jr.
• PPC440EP/Yosemite PCI misbehavior   Stefan Roese
• Download Eldk4.0   Chinafeng
• Download Eldk4.0   Wolfgang Denk
• How to check which CPU we are using? PPC?   jeanwelly
• [PATCH] PPC32 CPM_UART: update to utilize the new TTY flip API   Vitaly Bordug
• How to check which CPU we are using? PPC?   Wolfgang Denk
• [PATCH 00/10] Xilinx Virtex-* updates   David H. Lynch Jr.
• [PATCH 00/10] Xilinx Virtex-* updates   Grant Likely
• ppc4xx DMA fixes for simultaneous sg transfers   Peter Fercher
• PPC440EP/Yosemite PCI misbehavior   David Hawkins
• [Patch 1/3] Support AMCC Yosemite 440EP and Yellowstone 440GR (v3)   John Otken
• [Patch 2/3] Add Yosemite Platform defconfig   John Otken
• [Patch 3/3] Add Yellowstone Platform defconfig   John Otken
• [PATCH 00/10] Updated ML300 & ML403 patches   Grant Likely
• Virtex-4 TEMAC device driver available?   Patrick Huesmann
• Virtex-4 TEMAC device driver available?   Yoshio Kashiwagi
• [PATCH 00/10] Updated ML300 & ML403 patches   Peter Ryser
• [PATCH 00/10] Updated ML300 & ML403 patches   Grant Likely
• General GIT MO question   Grant Likely
• [PATCH 00/10] Updated ML300 & ML403 patches   Peter Ryser
• [PATCH 00/10] Updated ML300 & ML403 patches   Grant Likely
• [PATCH 00/10] Updated ML300 & ML403 patches   John Bonesio
• [PATCH 00/10] Updated ML300 & ML403 patches   Grant Likely
• [PATCH] PPC32 8xx: support for the physmapped flash on m8xx   Vitaly Bordug
• [PATCH 00/10] Updated ML300 & ML403 patches   Grant Likely
• Linux-2.4.31 porting   Jose França (Ext_GTBC)
• Linux-2.4.31 porting   Vitaly Bordug
• [PATCH 00/10] Updated ML300 & ML403 patches   T Ziomek
• [PATCH 00/10] Updated ML300 & ML403 patches   Grant Likely
• [PATCH 00/10] Updated ML300 & ML403 patches   T Ziomek
• [PATCH 00/10] Updated ML300 & ML403 patches   Grant Likely
• Question about SCC Ethernet driver   David Tao
• Question about SCC Ethernet driver   Dan Malek
• Question about SCC Ethernet driver   Pantelis Antoniou
• General GIT MO question   Andrey Volkov
• General GIT MO question   Grant Likely
• inconsistent gdbserver behaviour on Virtex-4   Grant Likely
• inconsistent gdbserver behaviour on Virtex-4   Grant Likely
• [PATCH 00/10] Updated ML300 & ML403 patches   Peter Ryser
• [PATCH 00/10] Updated ML300 & ML403 patches   David H. Lynch Jr.
• [PATCH 00/10] Updated ML300 & ML403 patches   Grant Likely
• [PATCH] powerpc: remove useless spinlock from mpc83xx watchdog   Kumar Gala
• [PATCH 00/10] Updated ML300 & ML403 patches   jeffer
• [PATCH 00/10] Updated ML300 & ML403 patches   Peter Ryser
• [PATCH 0/9] Xilinx Virtex ML300 & ML403 platform bus support   Grant C. Likely
• [PATCH 1/9] Move xparameters.h into xilinx virtex device specific path   Grant C. Likely
• [PATCH 2/9] Make Virtex-II Pro support generic for all Virtex devices   Grant C. Likely
• [PATCH 3/9] Migrate Xilinx Vertex support from the OCP bus to the platfom bus.   Grant C. Likely
• [PATCH 4/9] Migrate ML300 reference design to the platform bus   Grant C. Likely
• [PATCH 5/9] Add ML300 defconfig   Grant C. Likely
• [PATCH 6/9] Add Virtex-4 FX to cpu table   Grant C. Likely
• [PATCH 7/9] Add xparameters file for Xilinx ML403 reference design   Grant C. Likely
• [PATCH 8/9] Add support for Xilinx ML403 reference design   Grant C. Likely
• [PATCH 9/9] Add ML403 defconfig   Grant C. Likely
• [PATCH] powerpc: remove useless spinlock from mpc83xx watchdog   Alan Cox
• [PATCH] powerpc: remove useless spinlock from mpc83xx watchdog   Kumar Gala
• [PATCH] powerpc: remove useless spinlock from mpc83xx watchdog   Marcelo Tosatti
• [PATCH] powerpc: remove useless spinlock from mpc83xx watchdog   Alan Cox
• FEC ERROR   feng
• [PATCH] PPC32 CPM_UART: update to utilize the new TTY flip API   Paul Mackerras
• serial driver for MPC860T in linux 2.6.13   bharathi kandimalla
• u-boot debugging   Mustafa Çayır
• MPC5200, PCI, udelay(10)   Roman Kuzmenko
• serial drivers for MPC860Tin linux 2.6.13   bharathi kandimalla
• [PATCH] powerpc: remove useless spinlock from mpc83xx watchdog   Wim Van Sebroeck
• FEC ERROR   Wolfgang Denk
• u-boot debugging   Wolfgang Denk
• I'm in troube to port linux on 405ep   Jongmin Yoon
• I'm in troube to port linux on 405ep   Mark Chambers
• MPC5200, PCI, udelay(10)   Andrey Volkov
• PSC mode   Moloko Vellocet
• u-boot debugging   atul.sabharwal at exgate.tek.com
• u-boot debugging   atul.sabharwal at exgate.tek.com
• u-boot debugging   atul.sabharwal at exgate.tek.com
• u-boot debugging   atul.sabharwal at exgate.tek.com
• [PATCH] Add support for Freescale 83xx Host Mode USB   Randy Vinson
• u-boot debugging   Wolfgang Denk
• u-boot debugging   Wolfgang Denk
• u-boot debugging   bennett78
• u-boot debugging   atul.sabharwal at exgate.tek.com
• u-boot debugging   Atul Sabharwal
• u-boot debugging   Glenn Burkhardt
• u-boot debugging   Frank
• u-boot debugging   Albert David
• 2.4.x vs 2.6.x performance   Frank
• u-boot debugging   Paula Saameño
• u-boot debugging   Alexandre BASTOS
• u-boot debugging   David Jander
• u-boot debugging   Atul Sabharwal
• u-boot debugging   Atul Sabharwal
• Registers read-only   Moloko Vellocet
• Trouble with SMC serial port in ppc/boot/simple on Embedded Planet 8248 board   Laurent Pinchart
• [PATCH 4/9] Migrate ML300 reference design to the platform bus   Andrei Konovalov
• u-boot debugging   sri.dharmasanam at avagotech.com
• Problem getting code from git repository   Marty at GMail
• [PATCH 4/9] Migrate ML300 reference design to the platform bus   Grant Likely
• u-boot debugging   Wolfgang Denk
• [PATCH] Updated Patch to add support for Freescale 83xx Host Mode USB   Randy Vinson
• MCC Driver   s.maiti at tcs.com
• Linux kernel and u-boot debugging with Eclipse IDE   IGOR LURI
• Trouble with SMC serial port in ppc/boot/simple on Embedded Planet 8248 board   Laurent Pinchart
• [PATCH] Add support for lite5200b board.   John Rigby
• Yosemite/440EP why are readl()/ioread32() setup to read little-endian?   David Hawkins
• [PATCH] Add support for lite5200b board.   Sylvain Munaut
• Yosemite/440EP is there a global interrupt enable mask?   David Hawkins
• Help: FCC driver does not handle IPV6 multicast packet   Bizhan Gholikhamseh (bgholikh)
• Linux kernel and u-boot debugging with Eclipse IDE   IGOR LURI
• [FIXED] Trouble with SMC serial port in ppc/boot/simple on Embedded Planet 8248 board   Laurent Pinchart
• Yosemite/440EP why are readl()/ioread32() setup to read little-endian?   Stefan Roese
• [PATCH] Add support for lite5200b board.   Txema Lopez
• Yosemite/440EP is there a global interrupt enable mask?   Stefan Roese
• [RFC] arch/ppc/boot/simple/embed_boot.c : Merging all keyvals parsing code   Laurent Pinchart
• Linux kernel and u-boot debugging with Eclipse IDE   Wolfgang Denk
• Misunderstanding with function cpm_dpalloc in Linux 2.6.x   Laurent Lagrange
• 2.4.x vs 2.6.x performance   Dan Malek
• [RFC] arch/ppc/boot/simple/embed_boot.c : Merging all keyvals parsing code   Dan Malek
• 2.4.x vs 2.6.x performance   Frank
• [RFC] arch/ppc/boot/simple/embed_boot.c : Merging all keyvals parsing code   Laurent Pinchart
• Enable Billionton PCMCIA Bluetooth in MPC860 system (again)   Lo Chun Chung
• Trouble with SMC serial port in ppc/boot/simple on Embedded Planet8248 board   Laurent Pinchart
• Misunderstanding with function cpm_dpalloc in Linux 2.6.x   Pantelis Antoniou
• [PATCH] Updated Patch to add support for Freescale 83xx Host Mode USB   Marcelo Tosatti
• Enable Billionton PCMCIA Bluetooth in MPC860 system (again)   Lo Chun Chung
• Yosemite/440EP why are readl()/ioread32() setup to read little-endian?   David Hawkins
• Yosemite/440EP is there a global interrupt enable mask?   David Hawkins
• 2.4.x vs 2.6.x performance   Otto Solares
• Yosemite/440EP why are readl()/ioread32() setup to read little-endian?   Eugene Surovegin
• Yosemite/440EP is there a global interrupt enable mask?   Eugene Surovegin
• Yosemite/440EP why are readl()/ioread32() setup to read little-endian?   David Hawkins
• Yosemite/440EP is there a global interrupt enable mask?   David Hawkins
• Yosemite/440EP why are readl()/ioread32() setup to read little-endian?   Eugene Surovegin
• Yosemite/440EP is there a global interrupt enable mask?   Eugene Surovegin
• 2.4.x vs 2.6.x performance   Carlos Munoz
• Yosemite/440EP is there a global interrupt enable mask?   David Hawkins
• [PATCH] Add support for lite5200b board.   Sylvain Munaut
• Problem getting code from git repository   Wolfgang Denk
• [PATCH] Add support for lite5200b board.   Grant Likely
• 2.4.x vs 2.6.x performance   Frank
• [PATCH] Updated Patch to add support for Freescale 83xx Host Mode USB   Kumar Gala
• Yosemite/440EP why are readl()/ioread32() setup to read little-endian?   Stefan Roese
• Linux kernel and u-boot debugging with Eclipse IDE   IGOR LURI
• HELP! Memory mapping and address space doubts   Jose França (Ext_GTBC)
• Error: Three ML403 boards   Paula Saameño
• mpc82xx USB host driver   Dubb, Benjamin
• mpc8260 fcc enet transmit time out   Hunter, David
• [PATCH] Add support for lite5200b board.   John Rigby
• Yosemite/440EP why are readl()/ioread32() setup to read little-endian?   David Hawkins
• Question on USB gadget device driver for mpc 8272 on linux 2.6.14.   Jonathan Qiang
• kernel access of bad area   Chris Wardman
• mpc82xx USB host driver   Martin Krause
• mpc8260 fcc enet transmit time out   hubert.loewenguth
• [PATCH 00/10] Updated ML300 & ML403 patches   Paula Saameño
• Question on USB gadget device driver for mpc 8272 on linux 2.6.14.   Vitaly Bordug
• HELP! Memory mapping and address space doubts   Vitaly Bordug
• mpc82xx USB host driver   Dubb, Benjamin
• [PATCH 00/10] Updated ML300 & ML403 patches   Grant Likely
• [PATCH] CPM2: Fix totally bogus alignment handing of dpalloc   Clement Fabien
• Yosemite/440EP why are readl()/ioread32() setup to read little-endian?   David Hawkins
• Qt, forks and threads = segmentation faults?   Russell McGuire
• MPC5200 - Problem with PSC mode   Moloko Vellocet
• MPC875 porting   dibacco at inwind.it
• MPC875 porting   dibacco at inwind.it
• MPC875 porting   Dan Malek
• [PATCH] Add support for lite5200b board.   Sylvain Munaut
• Virtex-4 TEMAC device driver available?   David H. Lynch Jr.
• Qt, forks and threads = segmentation faults?   David Jander
• Question on USB gadget device driver for mpc 8272 on linux 2.6.14.   Mike Rapoport
• fs_enet not found in eldk   dibacco at inwind.it
• fs_enet not found in eldk   Vitaly Bordug
• MPC5200 - Problem with PSC mode   Zeitler, Nathan
• [RFC] arch/ppc/boot/simple/embed_boot.c : Merging all keyvals parsing code   Tom Rini
• [PATCH] Add support for lite5200b board.   John Rigby
• FW: MPC85xx class in San Jose, CA for February 7-10, 2006.   Le Tang (letang)
• Getting started with Xilinx V4 PPC?   David Summers
• MPC5200 - Problem with PSC mode   Moloko Vellocet
• Getting started with Xilinx V4 PPC?   bennett78
• [PATCH] Add support for lite5200b board.   Sylvain Munaut
• [PATCH] Add support for lite5200b board.   John Rigby
• fs_enet not found in eldk   Wolfgang Denk
• [PATCH] Add support for lite5200b board.   John Rigby
• [PATCH] Add support for lite5200b board.   John Rigby
• MPC5200 - Problem with PSC mode   Zeitler, Nathan
• HELP! Memory mapping and address space doubts   Jose França (Ext_GTBC)
• [PATCH] Add support for lite5200b board.   Sylvain Munaut
• m82xx usb host error   Dubb, Benjamin
• Question on USB gadget device driver for mpc 8272 on linux 2.6.14.   Vitaly Bordug
• Getting started with Xilinx V4 PPC?   Peter Ryser
• Getting started with Xilinx V4 PPC?   Paula Saameño
• [RFC] arch/ppc/boot/simple/embed_boot.c : Merging all keyvals parsing code   Laurent Pinchart
• SPI flash kernel 2.4 driver   dibacco at inwind.it
• Getting started with Xilinx V4 PPC?   David H. Lynch Jr.
• devboards   Peter Fercher
• devboards   Martin Krause

Last message date: Tue Jan 31 23:36:25 EST 2006
Archived on: Mon Jul 23 18:01:23 EST 2007

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...