[PATCH] Add support for lite5200b board.

[John Rigby]

and the arch/ppc/bestcomm directory as well

looks like maybe you didn't do a git-update-index?

On 1/30/06, John Rigby <jcrigby at gmail.com> wrote:
> Ok checked out the git tree and applied the patch.
> The drivers/net/fec_mpc52xxx directory seems to be missing.
>
> On 1/30/06, John Rigby <jcrigby at gmail.com> wrote:
> > Thanks, I had tried stripping off the http: and adding the .git but
> > not just adding the .git.
> >
> >
> > On 1/30/06, Sylvain Munaut <tnt at 246tnt.com> wrote:
> > > Ooops,
> > >
> > > git clone http://gitbits.246tnt.com/gitbits/linux-2.6-mpc52xx.git
> > >
> > > (notice the previously missing .git at the end)
> > >
> > >
> > >         Sylvain
> > >
> > > John Rigby wrote:
> > > > I tried:
> > > > git clone http://gitbits.246tnt.com/gitbits/linux-2.6-mpc52xx
> > > > and got:
> > > > defaulting to local storage area
> > > > Cannot get remote repository information.
> > > > Perhaps git-update-server-info needs to be run there?
> > > >
> > > >
> > > >
> > > > On 1/29/06, Sylvain Munaut <tnt at 246tnt.com> wrote:
> > > >
> > > >>John Rigby wrote:
> > > >>
> > > >>>
> > > >>>On 1/25/06, *Sylvain Munaut* <tnt at 246tnt.com <mailto:tnt at 246tnt.com>> wrote:
> > > >>>
> > > >>>
> > > >>>
> > > >>>    Should apply fine on vanilla. My suggestion for now is take vanilla,
> > > >>>    apply this patch, then the 2-3 patch from Andrey for BestComm and stuff.
> > > >>>
> > > >>>
> > > >>>I was working on getting bestcomm and fec working, but forward porting
> > > >>>my old 2.6.10 code to current is turning out to be more difficult than I
> > > >>>expected.
> > > >>>If you already have working code then I'll stop working on them.
> > > >>>
> > > >>>Where are these patches?  I'm new to this list so I don't have much
> > > >>>history.
> > > >>>Would I find these patches in the archive?
> > > >>
> > > >>Checkout (with git)
> > > >>
> > > >>http://gitbits.246tNt.com/gitbits/linux-2.6-mpc52xx
> > > >>
> > > >>then apply
> > > >>
> > > >>http://gitbits.246tNt.com/patches/bcomm-to-split.diff
> > > >>
> > > >> (I haven't cleanly splitted it up yet and right now I must go, so it's
> > > >>probably gonna be in the git tree this week, under the 'bestcomm' head ;)
> > > >>
> > > >>
> > > >>Please report if it works fine on your board (both lite5200 and
> > > >>lite5200b reports are welcome). I only did quick tests.
> > > >>
> > > >>
> > > >>
> > > >>        Sylvain
> > > >>
> > > >
> > > >
> > >
> > >
> >
>