[PATCH] Add support for lite5200b board.

[John Rigby]

Thanks, I had tried stripping off the http: and adding the .git but
not just adding the .git.


On 1/30/06, Sylvain Munaut <tnt at 246tnt.com> wrote:
> Ooops,
>
> git clone http://gitbits.246tnt.com/gitbits/linux-2.6-mpc52xx.git
>
> (notice the previously missing .git at the end)
>
>
>         Sylvain
>
> John Rigby wrote:
> > I tried:
> > git clone http://gitbits.246tnt.com/gitbits/linux-2.6-mpc52xx
> > and got:
> > defaulting to local storage area
> > Cannot get remote repository information.
> > Perhaps git-update-server-info needs to be run there?
> >
> >
> >
> > On 1/29/06, Sylvain Munaut <tnt at 246tnt.com> wrote:
> >
> >>John Rigby wrote:
> >>
> >>>
> >>>On 1/25/06, *Sylvain Munaut* <tnt at 246tnt.com <mailto:tnt at 246tnt.com>> wrote:
> >>>
> >>>
> >>>
> >>>    Should apply fine on vanilla. My suggestion for now is take vanilla,
> >>>    apply this patch, then the 2-3 patch from Andrey for BestComm and stuff.
> >>>
> >>>
> >>>I was working on getting bestcomm and fec working, but forward porting
> >>>my old 2.6.10 code to current is turning out to be more difficult than I
> >>>expected.
> >>>If you already have working code then I'll stop working on them.
> >>>
> >>>Where are these patches?  I'm new to this list so I don't have much
> >>>history.
> >>>Would I find these patches in the archive?
> >>
> >>Checkout (with git)
> >>
> >>http://gitbits.246tNt.com/gitbits/linux-2.6-mpc52xx
> >>
> >>then apply
> >>
> >>http://gitbits.246tNt.com/patches/bcomm-to-split.diff
> >>
> >> (I haven't cleanly splitted it up yet and right now I must go, so it's
> >>probably gonna be in the git tree this week, under the 'bestcomm' head ;)
> >>
> >>
> >>Please report if it works fine on your board (both lite5200 and
> >>lite5200b reports are welcome). I only did quick tests.
> >>
> >>
> >>
> >>        Sylvain
> >>
> >
> >
>
>