Error: Three ML403 boards

[Paula Saameño]

Hi again,

Finally, I get those three boards working with 2.4. It was a hardware
problem. I had written in ddr size 0x40000000, when it should be 0x4000000
(one extra 0, oops!).

I don't really know why it worked in the first one, haha!

Thank you very much!!!
Paula



On 1/11/06, Paula Saameño <gnathita at gmail.com> wrote:
>
>
> Hi, Peter,
>
> I have already checked that record, and even fixing that bug and adding
> the C_APU_CONTROL parameter, it still does not work in any board but one.
>
> Anyone has suffered the same issue or have any idea of why it is
> happening??
>
> Thanks a lot!
> Paula
>
>
> On 1/10/06, Peter Ryser <peter.ryser at xilinx.com> wrote:
> >
> > Paula,
> >
> > please verify that you are not running into the problem described in
> > Xilinx Answer Record 22179
> > (http://www.xilinx.com/xlnx/xil_ans_display.jsp?iLanguageID=1&iCountryID=1&getPagePath=22179
> > ).
> >
> > - Peter
> >
> >
> > Paula Saameño wrote:
> >
> > > Hello,
> > >
> > > I have 3 Xilinx ML403 boards. I have implemented a 2.4 kernel with a
> > > basic configuration, with network support, systemACE, IIC... and it
> > > works perfectly in one of them.
> > >
> > > However, when I put the ACE card, without making any change, in other
> > > ML403 board, it does not work. The .ace file is loaded ok but then the
> > > network leds (6 leds) start blinking and nothing else happens.
> > >
> > > I have tried with two ML403 different boards, and I have no idea of
> > > where the problem is. They should work in the same way, don't they?
> > >
> > > Any help would be great.
> > >
> > > Also, I am trying to load a 2.6 kernel, but I am still on the way. I
> > > will let you know if I get it working.
> > >
> > > Thanks a lot!
> > > Paula
> > >
> >
> > >------------------------------------------------------------------------
> > >
> > >_______________________________________________
> > >Linuxppc-embedded mailing list
> > >Linuxppc-embedded at ozlabs.org
> > >https://ozlabs.org/mailman/listinfo/linuxppc-embedded
> > >
> >
> >
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20060126/e396dc23/attachment.htm