Cardmgr Prism Problem

Mon Jan 9 02:59:30 EST 2006

On Sat, Jan 07, 2006 at 11:04:55AM -0500, Miguel Bello wrote:
> We have a TQMxxL board with ppcboot 1.1.5, kernel 2.4.25 and a ramdisk.
> I would like to setup a wireless link with WPA protocol (hostap driver
> and wpa_supplicant client). We are testing 2 cards: Netgear MA401 and
> Linksys WPC11 v3, both with prism chipset.
> 
> When I execute cardmgr, I get the kernel error message attached below.
> With others cards with no prism chipset, like YDI Diamond, YDI Sapphire
> or Cisco Airnet 350, I have no problem, the cardmgr recognize them.
> But I need to use the hostap driver with prism chipset cards
> (Please take note that with kernel 2.4.4 the cardmgr recognize the
> Netgear MA401, for instance)
> 
> If anyone has a clue to what I'm doing wrong, I'd appreciate it.
> 
> Best Regards
> 
> Miguel Bello
> 
> ====================================================================0
> 
> PPCBoot 1.1.5 (Sep  6 2004 - 13:09:55)
> 
> CPU:   PPC823EZTnnB2 at 50 MHz: 16 kB I-Cache 8 kB D-Cache
> Board: ### No HW ID - assuming TQM8xxL
> DRAM:  16 MB
> FLASH:  8 MB
> In:    serial
> Out:   lcd
> Err:   lcd
> Linux version 2.4.25 (root at desarrollo) (gcc version 2.95.2 19991024
> (release)) #18 Fri Jan 6 17:45:37 PET 2006
> MPC823 LCD memory at C01BE000
> On node 0 totalpages: 4096
> zone(0): 4096 pages.
> zone(1): 0 pages.
> zone(2): 0 pages.
> Kernel command line: root=/dev/ram/ rw
> ip=192.168.0.115:::255.255.255.0:::off panic=1
> Decrementer Frequency = 187500000/60
> Console: colour dummy device 80x25
> Calibrating delay loop... 49.86 BogoMIPS
> Memory: 12852k available (1240k kernel code, 436k data, 76k init, 0k
> highmem)
> Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
> Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
> Mount cache hash table entries: 512 (order: 0, 4096 bytes)
> Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
> Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
> POSIX conformance testing by UNIFIX
> Linux NET4.0 for Linux 2.4
> Based upon Swansea University Computer Society NET3.039
> Initializing RT netlink socket
> Starting kswapd
> JFFS version 1.0, (C) 1999, 2000  Axis Communications AB
> JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
> Console: switching to colour frame buffer device 80x30
> fb0: MPC823 LCD frame buffer device
> CPM UART driver version 0.04
> ttyS0 at 0x0280 is on SMC1 using BRG1
> ttyS1 at 0x0380 is on SMC2 using BRG2
> pty: 256 Unix98 ptys configured
> Found 2x16bit 4MByte CFI flash device of type AMD/Fujitsu standard at
> 40000000
> Registered flash device /dev/flasha (minor 0, 4 partitions)
> Found 2x16bit 4MByte CFI flash device of type AMD/Fujitsu standard at
> 40400000
> Registered flash device /dev/flashb (minor 8, 2 partitions)
> eth0: CPM ENET Version 0.2 on SCC2, 00:d0:93:00:05:4c
> RAMDISK driver initialized: 16 RAM disks of 5120K size 1024 blocksize
> init_tqm_mtd: chip probing count 0
> TQM8xxL-0: Found 2 x16 devices at 0x0 in 32-bit bank
> TQM8xxL-0: Found 2 x16 devices at 0x400000 in 32-bit bank
> Amd/Fujitsu Extended Query Table at 0x0040
> number of CFI chips: 2
> cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
> init_tqm_mtd: bank1, name:TQM8xxL-0, size:8388608bytes
> TQM flash0: Using Static image partition definition
> Creating 7 MTD partitions on "TQM8xxL-0":
> 0x00000000-0x00040000 : "u-boot"
> 0x00040000-0x00100000 : "kernel"
> 0x00100000-0x00200000 : "user"
> 0x00200000-0x00400000 : "initrd"
> 0x00400000-0x00600000 : "cramfs"
> 0x00600000-0x00800000 : "jffs"
> 0x00400000-0x00800000 : "big_fs"
> Linux Kernel Card Services 3.1.22
> options:  none
> m8xx_pcmcia: Version 0.05, 14-Apr-2002
> m8xx_pcmcia: TQM8xxL using SLOT_B with IRQ 13.
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP
> IP: routing cache hash table of 512 buckets, 4Kbytes
> TCP: Hash tables configured (established 1024 bind 1024)
> IP-Config: Complete:
>     device=eth0, addr=192.168.0.115, mask=255.255.255.0,
> gw=255.255.255.255,
>    host=192.168.0.115, domain=, nis-domain=(none),
>    bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=
> NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> RAMDISK: Compressed image found at block 0
> Freeing initrd memory: 1260k freed
> EXT2-fs warning: checktime reached, running e2fsck is recommended
> VFS: Mounted root (ext2 filesystem).
> Freeing unused kernel memory: 76k init
> init started:  BusyBox v0.51 (2005.12.14-06:57+0000) multi-call bi
> 
> BusyBox v0.51 (2005.12.14-06:57+0000) Built-in shell (lash)
> Enter 'help' for a list of built-in commands.
> 
> / #
> / #
> / # cardmgr
> cardmgr[14]: watching 1 sockets
> / # cardmgr[15]: starting, version is 3.2.1
> Machine check in kernel mode.
> Caused by (from SRR1=9032): Transfer error ack signal
> Oops: machine check, sig: 7
> NIP: C00C4840 XER: 00000000 LR: C00C481C SP: C094FB50 REGS: c094faa0
> TRAP: 0200    Not tainted
> MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
> TASK = c094e000[15] 'cardmgr' Last syscall: 54
> last math 00000000 last altivec 00000000
> GPR00: C30C1000 C094FB50 C094E000 C30C0000 C0158C30 C30C0000 FDFB3000
> 00000000
> GPR08: C30C0000 C30C0000 C0F99000 00001000 84004002 100223D8 00000000
> 00000000
> GPR16: 00000000 00000000 00000000 00000000 00009032 0094FF40 00000000
> C0004768
> GPR24: C00044C0 C094FBBA 00000002 C0FE2844 C094FBBA 00000002 C0FE2800
> 00000000
> Call backtrace:
> C00C481C C00C4EF8 C00C5410 C00C51D8 C00C6B44 C00C9FF4 C0047EDC
> C000451C 00000000 10001A58 100031CC 10004874 0FEA2394 00000000

Please run the oops through ksymoops to transform hex addresses into
function+line. Is it DENX's v2.4.25?