Help on LXT971 eth initialization

[batsayan.das at tcs.com]

Hi,

My MPC8260 customs board has LXT971 Ethernet chip on FCC1. I am able to 
get the linux prompt, but I am unable to initialize ethernet. I have tried 
different bootarg options (like setenv bootargs ip=dhcp etc)  and 
different kernel compilation options (like from make menuconfig, Network 
Option->enable DHCP support etc), but none enables the ethernet interface. 


Any help will be appreciated.

FYI, the ethernet is working from U-Boot. 

Thanks,
Batsayan Das
Tata Consultancy Services Limited
Mailto: batsayan.das at tcs.com
Website: http://www.tcs.com

Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information.   If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited.   If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments.  Thank you
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20060106/83e47b9d/attachment.htm