How to enable PHY

[batsayan.das at tcs.com]

Hi,

I found that ADS8260 board enables PHY by the following lines of code

#ifndef CONFIG_ADS8260
        /* Enable the PHY.
        */
        *(volatile uint *)(BCSR_ADDR + 4) &= ~BCSR1_FETHIEN;
        *(volatile uint *)(BCSR_ADDR + 4) |=  BCSR1_FETH_RST;
#endif


Our board does not have BCSR. My question is how to enable PHY for MPC8260 
based customs board without BCSR? 

Thanks,
Batsayan Das
Tata Consultancy Services Limited
Mailto: batsayan.das at tcs.com
Website: http://www.tcs.com

Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information.   If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited.   If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments.  Thank you
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20060106/8701df92/attachment.htm