[PATCH] Add support for lite5200b board.

[John Rigby]

Ok checked out the git tree and applied the patch.
The drivers/net/fec_mpc52xxx directory seems to be missing.

On 1/30/06, John Rigby <jcrigby at gmail.com> wrote:
> Thanks, I had tried stripping off the http: and adding the .git but
> not just adding the .git.
>
>
> On 1/30/06, Sylvain Munaut <tnt at 246tnt.com> wrote:
> > Ooops,
> >
> > git clone http://gitbits.246tnt.com/gitbits/linux-2.6-mpc52xx.git
> >
> > (notice the previously missing .git at the end)
> >
> >
> >         Sylvain
> >
> > John Rigby wrote:
> > > I tried:
> > > git clone http://gitbits.246tnt.com/gitbits/linux-2.6-mpc52xx
> > > and got:
> > > defaulting to local storage area
> > > Cannot get remote repository information.
> > > Perhaps git-update-server-info needs to be run there?
> > >
> > >
> > >
> > > On 1/29/06, Sylvain Munaut <tnt at 246tnt.com> wrote:
> > >
> > >>John Rigby wrote:
> > >>
> > >>>
> > >>>On 1/25/06, *Sylvain Munaut* <tnt at 246tnt.com <mailto:tnt at 246tnt.com>> wrote:
> > >>>
> > >>>
> > >>>
> > >>>    Should apply fine on vanilla. My suggestion for now is take vanilla,
> > >>>    apply this patch, then the 2-3 patch from Andrey for BestComm and stuff.
> > >>>
> > >>>
> > >>>I was working on getting bestcomm and fec working, but forward porting
> > >>>my old 2.6.10 code to current is turning out to be more difficult than I
> > >>>expected.
> > >>>If you already have working code then I'll stop working on them.
> > >>>
> > >>>Where are these patches?  I'm new to this list so I don't have much
> > >>>history.
> > >>>Would I find these patches in the archive?
> > >>
> > >>Checkout (with git)
> > >>
> > >>http://gitbits.246tNt.com/gitbits/linux-2.6-mpc52xx
> > >>
> > >>then apply
> > >>
> > >>http://gitbits.246tNt.com/patches/bcomm-to-split.diff
> > >>
> > >> (I haven't cleanly splitted it up yet and right now I must go, so it's
> > >>probably gonna be in the git tree this week, under the 'bestcomm' head ;)
> > >>
> > >>
> > >>Please report if it works fine on your board (both lite5200 and
> > >>lite5200b reports are welcome). I only did quick tests.
> > >>
> > >>
> > >>
> > >>        Sylvain
> > >>
> > >
> > >
> >
> >
>