June 2008 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Sun Jun 1 03:07:53 EST 2008
Ending: Mon Jun 30 19:22:08 EST 2008
Messages: 203

• FW: Error occured when appended FPGA image in the section of .init.text then bootup   David H. Lynch Jr.
• Error occured when appended FPGA image in the section of .init.text then bootup   Josh Boyer
• Error occured when appended FPGA image in the section of .init.text then bootup   David H. Lynch Jr.
• Error occured when appended FPGA image in the section of .init.text then bootup   Josh Boyer
• Error occured when appended FPGA image in the section of .init.text then bootup   朱利达
• Linux on a NCD Explora 450 Xterm   Anthony Louvet
• USB Host-to-Serial or USB Host-to-Ethernet   Huub Eikens
• USB Host-to-Serial or USB Host-to-Ethernet   Li Yang
• USB Host-to-Serial or USB Host-to-Ethernet   Huub Eikens
• ML507 EDK 10.1   John Linn
• XLlTemac port forwarding probelm?   khollan
• ML507 EDK 10.1   somshekar c kadam
• ML507 EDK 10.1   somshekar c kadam
• How accessing to my IP registers from Linux   Ludovic Desroches
• How accessing to my IP registers from Linux   A. Nolson
• How accessing to my IP registers from Linux   Ludovic Desroches
• Timer task synchronization   Detlev Zundel
• No console output when booting linux from uboot   Qin, Laigui (GE EntSol, Security)
• ML507 EDK 10.1   somshekar c kadam
• ML507 EDK 10.1   somshekar c kadam
• Is the linux-2.6.25.4 compatible with freescale lite5200b?   Henry Chen
• linux 2.6 hangs at __delay function on Viretx 4 board   swamydp
• linux 2.6 hangs at __delay function on Viretx 4 board   Peter Korsgaard
• Help on MPC82XX USB Host controller Development using m82xx-hcd.   gforgcc
• Help on MPC82XX USB Host controller Development using m82xx-hcd.   Laurent Pinchart
• Help on MPC82XX USB Host controller Development using m82xx-hcd.   gforgcc
• The 2.6.25 kernel dosen't run on pq2fads based board   Matvejchikov Ilya
• FP and signal 4   - Reyneke
• No console output when booting linux from uboot   Detlev Zundel
• Is the linux-2.6.25.4 compatible with freescale lite5200b?   Detlev Zundel
• The 2.6.25 kernel dosen't run on pq2fads based board   Scott Wood
• linux 2.6 hangs at __delay function on Viretx 4 board   John Linn
• linux 2.6 hangs at __delay function on Viretx 4 board   Peter Korsgaard
• linux 2.6 hangs at __delay function on Viretx 4 board   Howard, Marc
• linux 2.6 hangs at __delay function on Viretx 4 board   Stephen Neuendorffer
• No console output when booting linux from uboot   Qin, Laigui (GE EntSol, Security)
• FP and signal 4   Josh Boyer
• FP and signal 4   Stefan Roese
• 10th Real-Time Linux Workshop - Call for Papers   Wang, Baojun
• Evalution board   Barisa Kisku
• USB Host Controller driver for the MPC8270 processor   PhilippeCurie
• FP and signal 4   - Reyneke
• 10th Real-Time Linux Workshop - Call for Papers   Wang, Baojun
• FP and signal 4   Stefan Roese
• Concern regarding Booting up of linux board ...   Misbah khan
• Concern regarding Booting up of linux board ...   Josh Boyer
• Concern regarding Booting up of linux board ...   Misbah khan
• Concern regarding Booting up of linux board ...   Marco Stornelli
• No console output when booting linux from uboot   Detlev Zundel
• FP and signal 4   Jon Loeliger
• Is the linux-2.6.25.4 compatible with freescale lite5200b?   Mike Timmons
• The 2.6.25 kernel dosen't run on pq2fads based board   Matvejchikov Ilya
• Evalution board   Jon Smirl
• move kernel virtual base   jay_chen
• Is the linux-2.6.25.4 compatible with freescale lite5200b?   Mike Timmons
• No console output when booting linux from uboot   Qin, Laigui (GE EntSol, Security)
• Ethernet performance problems MPC5200   Rob Broersen
• Is the linux-2.6.25.4 compatible with freescale lite5200b?   Detlev Zundel
• The 2.6.25 kernel dosen't run on pq2fads based board   Detlev Zundel
• No console output when booting linux from uboot   Detlev Zundel
• No console output when booting linux from uboot   Matvejchikov Ilya
• Linux w/o UBoot from Linear Flash   Sam Karp
• Linux w/o UBoot from Linear Flash   Grant Likely
• Problem in flashing of yaffs image.   Misbah khan
• [PATCH] prtlvt board support (MPC5121e) added   David Jander
• PPC to PowerPC Migration   Andy Schmidt
• PPC to PowerPC Migration   John Linn
• PPC to PowerPC Migration   Mike Timmons
• Ooops... Re: [PATCH] prtlvt board support (MPC5121e) added   David Jander
• [PATCH 1/2] Added support for PRTLVT based boards (MPC5121)   David Jander
• [PATCH 2/2] Re-added support for FEC on MPC5121 from Freescale LTIB   David Jander
• PPC to PowerPC Migration   vb
• PPC to PowerPC Migration   Jon Loeliger
• PPC to PowerPC Migration   Darcy Watkins
• PPC to PowerPC Migration   vb
• PPC to PowerPC Migration   Darcy Watkins
• PPC to PowerPC Migration   vb
• PPC to PowerPC Migration   Scott Wood
• SPIDEV in xilinx-spi driver   A. Nolson
• PPC to PowerPC Migration   Josh Boyer
• PCI Express error on MPC8641D-HPCN   Reinhard Weiss
• PPC to PowerPC Migration   Darcy Watkins
• PPC to PowerPC Migration   Josh Boyer
• Non PCI HCD Implementation   Amarendra_Reddy
• PPC to PowerPC Migration   Darcy Watkins
• PPC to PowerPC Migration   Josh Boyer
• [PATCH 1/2] Added support for PRTLVT based boards (MPC5121)   Scott Wood
• [PATCH 2/2] Re-added support for FEC on MPC5121 from Freescale LTIB   Scott Wood
• PPC to PowerPC Migration   Andrew Schmidt
• [PATCH 1/2] Added support for PRTLVT based boards (MPC5121)   Grant Likely
• [PATCH 1/2] Added support for PRTLVT based boards (MPC5121)   Grant Likely
• [PATCH 1/2] Added support for PRTLVT based boards (MPC5121)   David Jander
• PCI Express error on MPC8641D-HPCN   Marco Stornelli
• PPC to PowerPC Migration   Jens Wirth
• [PATCH 2/2] Re-added support for FEC on MPC5121 from Freescale LTIB   David Jander
• [PATCH 1/2] Added support for PRTLVT based boards (MPC5121)   David Jander
• [PATCH 2/2] Re-added support for FEC on MPC5121 from Freescale LTIB to current head   David Jander
• [PATCH 2/2] Re-added support for FEC on MPC5121 from Freescale LTIB to current head   Kumar Gala
• [PATCH 1/2] Added support for PRTLVT based boards (MPC5121)   Scott Wood
• [PATCH 2/2] Re-added support for FEC on MPC5121 from Freescale LTIB   Scott Wood
• [PATCH 2/2] Re-added support for FEC on MPC5121 from Freescale LTIB to current head   Grant Likely
• [PATCH 2/2] Re-added support for FEC on MPC5121 from Freescale LTIB to current head   Grant Likely
• [PATCH 2/2] Re-added support for FEC on MPC5121 from Freescale LTIB   Grant Likely
• Question on PowerPC's JTAG instruction   Laurent Pinchart
• [PATCH 1/2] Added support for PRTLVT based boards (MPC5121)   Grant Likely
• Question on assigning interrupts in a dts   Michael Galea
• PPC to PowerPC Migration   Darcy Watkins
• PPC to PowerPC Migration   Grant Likely
• Reserving small amounts of memory with mem= (MPC85xx, 2.6.15 arch/ppc)   Florian Boelstler
• Question on assigning interrupts in a dts   Mike Timmons
• Question on assigning interrupts in a dts   Scott Wood
• Reserving small amounts of memory with mem= (MPC85xx, 2.6.15 arch/ppc)   Sylvain Joyeau
• Question on assigning interrupts in a dts   Michael Galea
• Freescale MPC8321 support   David Goodenough
• Correct way to adjust PCI resource allocations?   Trevor Anderson
• Freescale MPC8321 support   Scott Wood
• [PATCH 1/2] Added support for PRTLVT based boards (MPC5121)   David Gibson
• [PATCH 1/2] Added support for PRTLVT based boards (MPC5121)   Grant Likely
• [PATCH] Added support for PRTLVT based boards (MPC5121)   David Jander
• [PATCH 2/2] Re-added support for FEC on MPC5121 from Freescale LTIB to current head   David Jander
• Reserving small amounts of memory with mem= (MPC85xx, 2.6.15 arch/ppc)   Florian Boelstler
• Reserving small amounts of memory with mem= (MPC85xx, 2.6.15 arch/ppc)   Scott Wood
• Device tree for powerpc boards.   Leonid
• Device tree for powerpc boards.   Jon Loeliger
• Device tree for powerpc boards.   Leonid
• Linux 2.6, Xilinx EDK 10.1 and XUPV2P: A little report   Ricardo Ribalda Delgado
• [PATCH] [POWERPC] Fix return value check logic   Medve Emilian
• Xilinx EDK 10.1 and XUPV2P: A little report   Ricardo
• Reserving small amounts of memory with mem= (MPC85xx, 2.6.15 arch/ppc)   Florian Boelstler
• MPC8641D Msi   Marco Stornelli
• MPC8641D Msi   Kumar Gala
• IBM_NEW_EMAC should depends on CONFIG_CRC32??   Wang, Baojun
• MPC8641D Msi   Marco Stornelli
• [PATCH 2/2] Re-added support for FEC on MPC5121 from Freescale LTIB   John Rigby
• PCI DMA Problems With 82xx?   Mike Winter
• PCI DMA Problems With 82xx?   Scott Wood
• PCI DMA Problems With 82xx?   Rune Torgersen
• PCI DMA Problems With 82xx?   Rune Torgersen
• PCI DMA Problems With 82xx?   Scott Wood
• u-boot for ML403   Anand Kumar S
• Anybody have an mpc5200b mscan linux driver under 2.6.24, ARCH=powerpc or equiv?   Mike Timmons
• Anybody have an mpc5200b mscan linux driver under 2.6.24, ARCH=powerpc or equiv?   Wolfgang Grandegger
• Anybody have an mpc5200b mscan linux driver under 2.6.24, ARCH=powerpc or equiv?   Mike Timmons
• Anybody have an mpc5200b mscan linux driver under 2.6.24, ARCH=powerpc or equiv?   Wolfgang Grandegger
• [PATCH] Added support for PRTLVT based boards (MPC5121)   John Rigby
• Anybody have an mpc5200b mscan linux driver under 2.6.24, ARCH=powerpc or equiv?   Mike Timmons
• mpc5121 cache coherency   Kenneth Johansson
• [U-Boot-Users] mpc5121 cache coherency   John Rigby
• [U-Boot-Users] mpc5121 cache coherency   kenneth johansson
• Updating glibc on SELF image   Dave Cogley
• problem in MPC8358 HDLC controller   Biswal, Debasish
• Anybody have an mpc5200b mscan linux driver under 2.6.24, ARCH=powerpc or equiv?   Daniel Schnell
• linux 2.6 hangs at __delay function on Viretx 4 board   swamydp
• u-boot for ML403   Wolfgang Denk
• Updating glibc on SELF image   Dave Cogley
• [PATCH] fs_enet: restore promiscuous and multicast settings in restart()   Jon Loeliger
• [PATCH] fs_enet: restore promiscuous and multicast settings in restart()   Olof Johansson
• [PATCH] Added support for PRTLVT based boards (MPC5121)   David Jander
• mpc8313erdb   Nidhi Dua
• mpc8313erdb   Marco Stornelli
• [PATCH] Added support for PRTLVT based boards (MPC5121)   John Rigby
• u-boot, MPC8313erdb   Nidhi Dua
• u-boot, MPC8313erdb   Scott Wood
• mpc8313erdb   Nidhi Dua
• u-boot, MPC8313erdb   Mike Timmons
• mpc8313erdb   Carlos Roberto Moratelli
• 8xx scc hdlc driver   melinda develey
• NAND access fail after MMU enabled when booting linux   Qin, Laigui (GE EntSol, Security)
• [PATCH] Added support for PRTLVT based boards (MPC5121)   David Jander
• how to understand pci section in device tree source file   zhanglei459
• NAND access fail after MMU enabled when booting linux   Scott Wood
• how to understand pci section in device tree source file   Scott Wood
• Linux on Virtex board with ARCH=powerpc   Peter Mendham
• Linux on Virtex board with ARCH=powerpc   John Linn
• Migrating from 2.6.11 to 2.6.23 breaks pci-e with LSI 1068 SAS chip   Vince Asbridge
• Graphic Card on Freescale MPC837x-rdb   Bizhan Gholikhamseh (bgholikh)
• Graphic Card on Freescale MPC837x-rdb   Kumar Gala
• Linux on Virtex board with ARCH=powerpc   Peter Mendham
• Linux on Virtex board with ARCH=powerpc   John Linn
• Linux on Virtex board with ARCH=powerpc   Stephen Neuendorffer
• Graphic Card on Freescale MPC837x-rdb   Benjamin Herrenschmidt
• Graphic Card on Freescale MPC837x-rdb   Anatolij Gustschin
• Migrating from 2.6.11 to 2.6.23 breaks pci-e with LSI 1068 SAS chip   Kumar Gala
• Linux on Virtex board with ARCH=powerpc   Peter Mendham
• Linux on Virtex board with ARCH=powerpc   John Linn
• Migrating from 2.6.11 to 2.6.23 breaks pci-e with LSI 1068 SAS chip   Siva Prasad
• Rapidio interface in recent kernels   Alex Dubov
• Linux on Virtex board with ARCH=powerpc   Peter Mendham
• Linux on Virtex board with ARCH=powerpc   John Linn
• Rapidio interface in recent kernels   Kumar Gala
• Migrating from 2.6.11 to 2.6.23 breaks pci-e with LSI 1068 SAS chip   Kumar Gala
• GPIO on 8360 from dts par_io?   Michael Galea
• Migrating from 2.6.11 to 2.6.23 breaks pci-e with LSI 1068 SAS chip   Siva Prasad
• National Semi DP83865 Phy on custom hardware with PPC 8540 CPU   Ed Henderson
• Rapidio interface in recent kernels   Alex Dubov
• Linux on Virtex board with ARCH=powerpc   Peter Mendham
• Linux on Virtex board with ARCH=powerpc   John Linn
• No subject  
• Linux on Virtex board with ARCH=powerpc   Peter Mendham
• Linux on Virtex board with ARCH=powerpc   Aaron Sells
• Linux on Virtex board with ARCH=powerpc   Peter Mendham
• Linux on Virtex board with ARCH=powerpc   Peter Korsgaard
• High Memory problem on 2.4.22 Linux, 2GB ppc card   Ruksen INANIR

Last message date: Mon Jun 30 19:22:08 EST 2008
Archived on: Wed Jul 16 11:03:45 EST 2008

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...