PCI Express error on MPC8641D-HPCN

Reinhard Weiss reinhard.weiss at lauterbach.com
Thu Jun 12 03:08:23 EST 2008


Hi,

I try to get 2.6.25.6 running on Freescale's MPC8641D-HPCN (Processor is revision 1), but somehow the PCI express controller setup fails:

PCI: Probing PCI hardware
PCI: 0000:00:00.0: class b20 doesn't match header type 01. Ignoring class.
PCI: 0001:02:00.0: class b20 doesn't match header type 01. Ignoring class.
PCI: Closing bogus Apple Firmware region 1 on bus 0x03
PCI: Closing bogus Apple Firmware region 2 on bus 0x03
PCI: Cannot allocate resource region 0 of device 0000:01:1d.0, will remap
PCI: Cannot allocate resource region 1 of device 0000:01:1d.1, will remap
PCI: Failed to allocate I/O resource #0:100 at 1000 for 0000:01:1d.0
PCI: Failed to allocate I/O resource #1:100 at 1000 for 0000:01:1d.1
PCI: not setting up bridge 0000:00:00.0 for bus 1
PCI: Enabling device 0000:00:00.0 (0106 -> 0107)
PCI: not setting up bridge 0001:02:00.0 for bus 3
PCI: Enabling device 0001:02:00.0 (0106 -> 0107)

- PCIe worked with 2.6.20.7 on this board, but unfortunately SMP support was not ready then. 
- on MPC8610-HPCD, PCIe works with 2.6.25.6, so I wonder what could be the difference.

Any ideas?

Best regards,
Reinhard



More information about the Linuxppc-embedded mailing list