PCI Express error on MPC8641D-HPCN

[Marco Stornelli]

Reinhard Weiss ha scritto:
> Hi,
> 
> I try to get 2.6.25.6 running on Freescale's MPC8641D-HPCN (Processor is revision 1), but somehow the PCI express controller setup fails:
> 
> PCI: Probing PCI hardware
> PCI: 0000:00:00.0: class b20 doesn't match header type 01. Ignoring class.
> PCI: 0001:02:00.0: class b20 doesn't match header type 01. Ignoring class.
> PCI: Closing bogus Apple Firmware region 1 on bus 0x03
> PCI: Closing bogus Apple Firmware region 2 on bus 0x03
> PCI: Cannot allocate resource region 0 of device 0000:01:1d.0, will remap
> PCI: Cannot allocate resource region 1 of device 0000:01:1d.1, will remap
> PCI: Failed to allocate I/O resource #0:100 at 1000 for 0000:01:1d.0
> PCI: Failed to allocate I/O resource #1:100 at 1000 for 0000:01:1d.1
> PCI: not setting up bridge 0000:00:00.0 for bus 1
> PCI: Enabling device 0000:00:00.0 (0106 -> 0107)
> PCI: not setting up bridge 0001:02:00.0 for bus 3
> PCI: Enabling device 0001:02:00.0 (0106 -> 0107)
> 
> - PCIe worked with 2.6.20.7 on this board, but unfortunately SMP support was not ready then. 
> - on MPC8610-HPCD, PCIe works with 2.6.25.6, so I wonder what could be the difference.
> 
> Any ideas?
> 
> Best regards,
> Reinhard
> 
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded at ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
> 

I'm working with this board and I'm beginning to doubt that the pci 
express works well. You can see my problems in my previous posts in this 
mailing list sometimes ago.

-- 
Marco Stornelli
Embedded Software Engineer
CoRiTeL - Consorzio di Ricerca sulle Telecomunicazioni
http://www.coritel.it

marco.stornelli at coritel.it
+39 06 72582838