August 2012 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Wed Aug 1 00:11:25 EST 2012
Ending: Fri Aug 31 23:21:04 EST 2012
Messages: 1175

• [RFC][PATCH v3 1/3] runtime interpreted power sequences   Mark Brown
• [RFC][PATCH v3 1/3] runtime interpreted power sequences   Mark Brown
• [RFC][PATCH v3 1/3] runtime interpreted power sequences   Thierry Reding
• [RFC][PATCH v3 1/3] runtime interpreted power sequences   Mark Brown
• [RFC][PATCH v3 1/3] runtime interpreted power sequences   Mark Brown
• [RFC][PATCH v3 1/3] runtime interpreted power sequences   Thierry Reding
• [RFC][PATCH v3 1/3] runtime interpreted power sequences   Mark Brown
• [PATCH v3 06/18] tegra: fdt: Add LCD definitions for Tegra   Stephen Warren
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Stephen Warren
• [RFC][PATCH v3 1/3] runtime interpreted power sequences   Greg Kroah-Hartman
• [RFC][PATCH v3 1/3] runtime interpreted power sequences   Mark Brown
• [RFC][PATCH v3 1/3] runtime interpreted power sequences   Stephen Warren
• [RFC][PATCH v3 1/3] runtime interpreted power sequences   Greg Kroah-Hartman
• [RFC][PATCH v3 1/3] runtime interpreted power sequences   Mark Brown
• [PATCH v3 09/10] of: Add of_pci_parse_ranges()   Rob Herring
• [PATCH v3 08/10] of/address: Handle #address-cells > 2 specially   Rob Herring
• [RFC] media DT bindings   Laurent Pinchart
• [RFC/PATCH 02/13] media: s5p-csis: Add device tree support   Laurent Pinchart
• [RFC/PATCH 09/13] media: s5k6aa: Add support for device tree based instantiation   Laurent Pinchart
• [PATCH v2] gpio: Add Avionic Design N-bit GPIO expander support   Rob Herring
• [PATCH v2] gpio: Add Avionic Design N-bit GPIO expander support   Stephen Warren
• [RFC] media DT bindings   Stephen Warren
• Gethering power management/policy hw drivers under drivers/power/? (Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences)   Anton Vorontsov
• [RFC][PATCH v3 1/3] runtime interpreted power sequences   Mitch Bradley
• [RFC] media DT bindings   Laurent Pinchart
• [PATCH v3 1/2] ARM: EXYNOS: Add clock support for Gscaler   Kukjin Kim
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Thierry Reding
• [PATCH v3 2/2] ARM: EXYNOS: Add Gscaler device from DT   Kukjin Kim
• [RFC] media DT bindings   Guennadi Liakhovetski
• [PATCH v3 09/10] of: Add of_pci_parse_ranges()   Thierry Reding
• [RFC][PATCH v3 1/3] runtime interpreted power sequences   Thierry Reding
• [RFC] media DT bindings   Laurent Pinchart
• [RFC][PATCH v3 1/3] runtime interpreted power sequences   Thierry Reding
• [PATCH v3 2/2] ARM: EXYNOS: Add Gscaler device from DT   Thomas Abraham
• [PATCH v3 2/2] ARM: EXYNOS: Add Gscaler device from DT   Kukjin Kim
• [PATCH v3 2/2] ARM: EXYNOS: Add Gscaler device from DT   Sylwester Nawrocki
• [PATCH v3 2/2] ARM: EXYNOS: Add Gscaler device from DT   Kukjin Kim
• [PATCH v6 04/11] usb: otg: nop: add support for multiple tranceiver   Felipe Balbi
• [RFC][PATCH v3 1/3] runtime interpreted power sequences   Mark Brown
• [RFC][PATCH v3 1/3] runtime interpreted power sequences   Thierry Reding
• [RFC][PATCH v3 1/3] runtime interpreted power sequences   Mark Brown
• [RFC][PATCH v3 1/3] runtime interpreted power sequences   Thierry Reding
• [PATCH 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs   Arnd Bergmann
• DT GPIO numbering?   Johannes Stezenbach
• [RFC] media DT bindings   Stephen Warren
• [PATCH v3 09/10] of: Add of_pci_parse_ranges()   Stephen Warren
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Stephen Warren
• [PATCH v3 2/2] ARM: EXYNOS: Add Gscaler device from DT   Sylwester Nawrocki
• [PATCH] of: Allow busses with #size-cells=0   Stephen Warren
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Jon Hunter
• [PATCH] mfd: add MAX8907 core driver   Stephen Warren
• [PATCH 1/2] SPI: spi-gpio: store chipselect information in private structure   Mark Brown
• [PATCH] of: Allow busses with #size-cells=0   Rob Herring
• [PATCH] of: Allow busses with #size-cells=0   Stephen Warren
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Thierry Reding
• [PATCH v2] gpio: Add Avionic Design N-bit GPIO expander support   Thierry Reding
• [PATCH v2 1/2] can: c_can: Add device tree support to Bosch C_CAN/D_CAN controller   Marc Kleine-Budde
• [RFC][PATCH v3 1/3] runtime interpreted power sequences   Thierry Reding
• [RFC][PATCH v3 1/3] runtime interpreted power sequences   Thierry Reding
• [PATCH v2 1/2] can: c_can: Add device tree support to Bosch C_CAN/D_CAN controller   AnilKumar, Chimata
• [PATCH v3 0/3] Add DT support to C_CAN/D_CAN controller   AnilKumar Ch
• [PATCH v3 1/3] can: c_can: Add device tree support to Bosch C_CAN/D_CAN controller   AnilKumar Ch
• [PATCH v3 2/3] can: c_can: Modify c_can device names in c_can_pci driver   AnilKumar Ch
• [PATCH v3 3/3] can: c_can: Add runtime PM support to Bosch C_CAN/D_CAN controller   AnilKumar Ch
• [PATCH v3 0/3] Add DT support to C_CAN/D_CAN controller   Marc Kleine-Budde
• [PATCH v3 0/3] Add DT support to C_CAN/D_CAN controller   AnilKumar, Chimata
• [PATCH v3 0/3] Add DT support to C_CAN/D_CAN controller   Marc Kleine-Budde
• [PATCH 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs   Arnd Bergmann
• [PATCH v3 1/3] can: c_can: Add device tree support to Bosch C_CAN/D_CAN controller   Arnd Bergmann
• [PATCH v3 0/3] Add DT support to C_CAN/D_CAN controller   AnilKumar, Chimata
• [PATCH] regulator: tps6586x: add support for SYS rail   Mark Brown
• [PATCH v3 0/3] Add DT support to C_CAN/D_CAN controller   Marc Kleine-Budde
• [PATCH v3 1/3] can: c_can: Add device tree support to Bosch C_CAN/D_CAN controller   AnilKumar, Chimata
• [PATCH v3 0/3] Add DT support to C_CAN/D_CAN controller   AnilKumar Ch
• [PATCH v4 1/3] can: c_can: Modify c_can device names   AnilKumar Ch
• [PATCH v4 2/3] can: c_can: Add device tree support to Bosch C_CAN/D_CAN controller   AnilKumar Ch
• [PATCH v4 3/3] can: c_can: Add runtime PM support to Bosch C_CAN/D_CAN controller   AnilKumar Ch
• [PATCH] regulator: tps6586x: add support for SYS rail   Mark Brown
• [PATCH] mfd: add MAX8907 core driver   Mark Brown
• [PATCH v3 2/2] ARM: EXYNOS: Add Gscaler device from DT   Olof Johansson
• [PATCH] regulator: tps6586x: add support for SYS rail   Stephen Warren
• Device tree backporting for ARM on 2.6.32 kernel   Pankaj Pandey
• [PATCH] mfd: add MAX8907 core driver   Stephen Warren
• [PATCH] mfd: add MAX8907 core driver   Mark Brown
• [RFC][PATCH v3 1/3] runtime interpreted power sequences   Mark Brown
• [PATCH v2] of: Add videomode helper   Stephen Warren
• [PATCH 1/2] net: davinci_mdio: enable and disable clock   Daniel Mack
• [PATCH 2/2] net: davinci_mdio: add DT bindings   Daniel Mack
• [PATCH v2] of: Add videomode helper   Stephen Warren
• [PATCH 1/2] net: davinci_mdio: enable and disable clock   Russell King - ARM Linux
• [PATCH 1/2] net: davinci_mdio: enable and disable clock   Daniel Mack
• [PATCH 1/2] net: davinci_mdio: enable and disable clock   Paul Walmsley
• [PATCH 1/2] net: davinci_mdio: enable and disable clock   Daniel Mack
• [PATCH v7 00/11] usb: musb: adding multi instance support   Daniel Mack
• am33xx: default to status = "disabled"?   Daniel Mack
• am33xx: default to status = "disabled"?   Arnd Bergmann
• [PATCH v3 2/2] ARM: EXYNOS: Add Gscaler device from DT   Sylwester Nawrocki
• <Query> How to read arguments from a gpio handle   Leela Krishna Amudala
• <Query> How to read arguments from a gpio handle   Daniel Mack
• [PATCH 1/2] net: davinci_mdio: enable and disable clock   Vaibhav Hiremath
• [PATCH 1/2] net: davinci_mdio: enable and disable clock   Daniel Mack
• <Query> How to read arguments from a gpio handle   Stephen Warren
• [PATCH 1/2] net: davinci_mdio: enable and disable clock   Hiremath, Vaibhav
• [PATCH V2] dtc: Add ability to delete nodes and properties   David Gibson
• [PATCH v2 1/2] arm/dts: AM33XX: Add D_CAN device tree data   Vaibhav Hiremath
• [PATCH v4 3/3] can: c_can: Add runtime PM support to Bosch C_CAN/D_CAN controller   Hiremath, Vaibhav
• [PATCH v2] of: Add videomode helper   Sascha Hauer
• [PATCH v7 00/11] usb: musb: adding multi instance support   Daniel Mack
• <Query> How to read arguments from a gpio handle   Leela Krishna Amudala
• [PATCH v7 00/11] usb: musb: adding multi instance support   Daniel Mack
• [PATCH v7 00/11] usb: musb: adding multi instance support   Hiremath, Vaibhav
• [PATCH v2 1/2] arm/dts: AM33XX: Add D_CAN device tree data   Vaibhav Hiremath
• am33xx: default to status = "disabled"?   Hiremath, Vaibhav
• [PATCH V3 1/2] of: Add generic device tree DMA helpers   Vinod Koul
• [PATCH v7 00/11] usb: musb: adding multi instance support   Daniel Mack
• [PATCH v7 00/11] usb: musb: adding multi instance support   Koen Kooi
• [PATCH 3/4] arm/dts: omap5-evm: Add keypad data   Koen Kooi
• [PATCH v2 1/2] drivers: bus: add a new driver for omap-ocp2scp   Felipe Balbi
• [PATCH v2 2/2] arm/dts: omap4: Add ocp2scp data   Felipe Balbi
• [PATCH v6 01/11] drivers: usb: otg: add a new driver for omap usb2 phy   Felipe Balbi
• [PATCH v6 02/11] arm/dts: omap: Add omap-usb2 dt data   Felipe Balbi
• [PATCH v6 03/11] drivers: usb: otg: make twl6030_usb as a comparator driver to omap_usb2   Felipe Balbi
• [PATCH v6 04/11] arm: omap: hwmod: add a new addr space in otg for writing to control module   Felipe Balbi
• [PATCH v6 05/11] drivers: usb: twl6030: Add dt support for twl6030 usb   Felipe Balbi
• [PATCH v6 06/11] arm/dts: Add twl6030-usb data   Felipe Balbi
• [PATCH v6 07/11] drivers: usb: twl4030: Add device tree support for twl4030 usb   Felipe Balbi
• [PATCH v6 08/11] arm/dts: Add twl4030-usb data   Felipe Balbi
• [PATCH v6 09/11] drivers: usb: musb: Add device tree support for omap musb glue   Felipe Balbi
• [PATCH v6 10/11] arm/dts: omap: Add usb_otg and glue data   Felipe Balbi
• [PATCH v6 11/11] arm: omap: phy: remove unused functions from omap-phy-internal.c   Felipe Balbi
• [PATCH v2 1/2] drivers: bus: add a new driver for omap-ocp2scp   ABRAHAM, KISHON VIJAY
• [PATCH v6 01/11] drivers: usb: otg: add a new driver for omap usb2 phy   ABRAHAM, KISHON VIJAY
• [PATCH v6 03/11] drivers: usb: otg: make twl6030_usb as a comparator driver to omap_usb2   ABRAHAM, KISHON VIJAY
• [PATCH v6 04/11] arm: omap: hwmod: add a new addr space in otg for writing to control module   ABRAHAM, KISHON VIJAY
• [PATCH v6 05/11] drivers: usb: twl6030: Add dt support for twl6030 usb   ABRAHAM, KISHON VIJAY
• [PATCH v6 07/11] drivers: usb: twl4030: Add device tree support for twl4030 usb   ABRAHAM, KISHON VIJAY
• [PATCH v6 11/11] arm: omap: phy: remove unused functions from omap-phy-internal.c   ABRAHAM, KISHON VIJAY
• [PATCH v6 09/11] drivers: usb: musb: Add device tree support for omap musb glue   ABRAHAM, KISHON VIJAY
• [PATCH] hwmon: tmp102: Add device tree support   Benoit Cousson
• [PATCH V2] regulator: tps6586x: add support for SYS rail   Stephen Warren
• <Query> How to read arguments from a gpio handle   Stephen Warren
• [PATCH v7 00/11] usb: musb: adding multi instance support   Hiremath, Vaibhav
• [PATCH v7 00/11] usb: musb: adding multi instance support   Koen Kooi
• [PATCH 1/4] arm/dts: omap5-evm: Add I2C support   Sergei Shtylyov
• [PATCH v2] of: Add videomode helper   Stephen Warren
• [PATCH v4 3/3] can: c_can: Add runtime PM support to Bosch C_CAN/D_CAN controller   Marc Kleine-Budde
• [PATCH V2] regulator: tps6586x: add support for SYS rail   Mark Brown
• [PATCH] regulator: tps6586x: add support for SYS rail   Mark Brown
• [RFC] media DT bindings   Guennadi Liakhovetski
• [PATCH resend 1/2] SPI: spi-gpio: store chipselect information in private structure   Mark Brown
• [RFC][PATCH v3 1/3] runtime interpreted power sequences   Mark Brown
• [PATCH V1 1/3] GPIO: PCA953X: Increase size of invert variable to support 24 bit   Linus Walleij
• [PATCH V1 0/3] Extend TCA6424 support   Linus Walleij
• [PATCH resend 2/2] SPI: spi-gpio: Add DT bindings   Linus Walleij
• DT GPIO numbering?   Linus Walleij
• [PATCH v2] gpio: Add Avionic Design N-bit GPIO expander support   Linus Walleij
• [PATCH resend 2/2] SPI: spi-gpio: Add DT bindings   Daniel Mack
• [PATCH v2 0/4] Add a generic cpufreq-cpu0 driver   Shawn Guo
• [PATCH v2 1/4] ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp   Shawn Guo
• [PATCH v2 2/4] PM / OPP: Initialize OPP table from device tree   Shawn Guo
• [PATCH v2 3/4] regulator: add a new API regulator_set_voltage_tol()   Shawn Guo
• [PATCH v2 4/4] cpufreq: Add a generic cpufreq-cpu0 driver   Shawn Guo
• [PATCH resend 1/2] SPI: spi-gpio: store chipselect information in private structure   Daniel Mack
• [PATCH v3 1/2] lis3: add generic DT matching code   Daniel Mack
• [PATCH resend 2/2] SPI: spi-gpio: Add DT bindings   Linus Walleij
• [PATCH v7 00/11] usb: musb: adding multi instance support   Daniel Mack
• [PATCH 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Heiko Stübner
• DT GPIO numbering?   Stephen Warren
• [PATCH v2 2/4] PM / OPP: Initialize OPP table from device tree   Rob Herring
• [PATCH v2 2/4] PM / OPP: Initialize OPP table from device tree   Shawn Guo
• [PATCH v2 2/4] PM / OPP: Initialize OPP table from device tree   Rob Herring
• [PATCH v3 1/2] lis3: add generic DT matching code   Rob Herring
• [PATCH v2] gpio: Add Avionic Design N-bit GPIO expander support   Thierry Reding
• [PATCH v3 1/2] lis3: add generic DT matching code   Daniel Mack
• [PATCH v2 2/4] PM / OPP: Initialize OPP table from device tree   Shawn Guo
• DT GPIO numbering?   Linus Walleij
• [PATCH v2] gpio: Add Avionic Design N-bit GPIO expander support   Linus Walleij
• [PATCH v7 00/11] usb: musb: adding multi instance support   Hiremath, Vaibhav
• [PATCH v4 3/3] can: c_can: Add runtime PM support to Bosch C_CAN/D_CAN controller   Hiremath, Vaibhav
• [PATCH 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Kyungmin Park
• [PATCH 1/4] arm/dts: omap5-evm: Add I2C support   Felipe Balbi
• [PATCH v6 01/11] drivers: usb: otg: add a new driver for omap usb2 phy   Felipe Balbi
• [PATCH v6 00/11] omap: musb: Add device tree support   Felipe Balbi
• [PATCH 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Heiko Stübner
• [PATCH v6 00/11] omap: musb: Add device tree support   ABRAHAM, KISHON VIJAY
• [PATCH] driver: misc: bmp085: remove "of_match_table" property.   Felipe Balbi
• [PATCH v4 1/3] can: c_can: Modify c_can device names   Marc Kleine-Budde
• [PATCH v4 2/3] can: c_can: Add device tree support to Bosch C_CAN/D_CAN controller   Marc Kleine-Budde
• [PATCH v4 1/3] can: c_can: Modify c_can device names   AnilKumar, Chimata
• [PATCH v6 01/11] drivers: usb: otg: add a new driver for omap usb2 phy   Felipe Balbi
• [PATCH v6 01/11] drivers: usb: otg: add a new driver for omap usb2 phy   ABRAHAM, KISHON VIJAY
• DT GPIO numbering?   Johannes Stezenbach
• [PATCH v3 1/2] lis3: add generic DT matching code   AnilKumar, Chimata
• DT GPIO numbering?   Mitch Bradley
• [PATCH v3 0/2] omap: add ocp2scp as a bus driver   Kishon Vijay Abraham I
• [PATCH v3 1/2] drivers: bus: add a new driver for omap-ocp2scp   Kishon Vijay Abraham I
• [PATCH v3 2/2] arm/dts: omap4: Add ocp2scp data   Kishon Vijay Abraham I
• [PATCH] arm/dts: AM33XX: Set the default status of module to "disabled" state   Vaibhav Hiremath
• [PATCH] arm/dts: AM33XX: Set the default status of module to "disabled" state   Arnd Bergmann
• [PATCH v3 1/2] drivers: bus: add a new driver for omap-ocp2scp   Felipe Balbi
• [PATCH v7 0/7] omap: musb: Add device tree support   Kishon Vijay Abraham I
• [PATCH v7 1/7] drivers: usb: phy: add a new driver for omap usb2 phy   Kishon Vijay Abraham I
• [PATCH v7 2/7] arm: omap: hwmod: add a new addr space in otg for writing to control module   Kishon Vijay Abraham I
• [PATCH v7 3/7] drivers: usb: otg: make twl6030_usb as a comparator driver to omap_usb2   Kishon Vijay Abraham I
• [PATCH v7 4/7] drivers: usb: twl6030: Add dt support for twl6030 usb   Kishon Vijay Abraham I
• [PATCH v7 5/7] drivers: usb: twl4030: Add device tree support for twl4030 usb   Kishon Vijay Abraham I
• [PATCH v7 6/7] drivers: usb: musb: Add device tree support for omap musb glue   Kishon Vijay Abraham I
• [PATCH v7 7/7] arm: omap: phy: remove unused functions from omap-phy-internal.c   Kishon Vijay Abraham I
• [PATCH v4 0/2] omap: add ocp2scp as a bus driver   Kishon Vijay Abraham I
• [PATCH v4 1/2] drivers: bus: add a new driver for omap-ocp2scp   Kishon Vijay Abraham I
• [PATCH v4 2/2] arm/dts: omap4: Add ocp2scp data   Kishon Vijay Abraham I
• Atmel bindings to pinctrl/pinmux/etc   Nicolas Ferre
• [PATCH] driver: misc: bmp085: remove "of_match_table" property.   Mark Brown
• [RFC][PATCH v3 1/3] runtime interpreted power sequences   Stephen Warren
• [RFC:PATCH 3.6.0-rc1] dt/platform: Add platform dev instance id in dt probing.   Rob Herring
• [PATCH v3 2/2] ARM: EXYNOS: Add Gscaler device from DT   Sylwester Nawrocki
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Stephen Warren
• [PATCH 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Kyungmin Park
• [PATCH] driver: misc: bmp085: remove "of_match_table" property.   Felipe Balbi
• [PATCH] arm/dts: omap5: Add mmc controller nodes and board data   Balaji T K
• [PATCH RESEND v2 1/2] arm/dts: Add AM33XX basic pinctrl support   Tony Lindgren
• [PATCH v2 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Heiko Stübner
• [PATCH] arm/dts: omap5: Add mmc controller nodes and board data   Arnd Bergmann
• [PATCH RESEND v2 1/2] arm/dts: Add AM33XX basic pinctrl support   AnilKumar, Chimata
• [PATCH v2 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs   Kukjin Kim
• [PATCH v3 2/2] ARM: EXYNOS: Add Gscaler device from DT   Kukjin Kim
• [PATCH v4 3/3] can: c_can: Add runtime PM support to Bosch C_CAN/D_CAN controller   AnilKumar, Chimata
• [PATCH 1/2] arm/dts: Mark vcxio, v2v1 and v1v8 regulators as always on   Tony Lindgren
• [PATCH] driver: misc: bmp085: remove "of_match_table" property.   Mark Brown
• OMAP: Configuring CONTROL_DEVCONF0 register via DT with pinctrl   Tony Lindgren
• [PATCH v2 1/2] arm/dts: AM33XX: Add D_CAN device tree data   AnilKumar, Chimata
• [PATCH 3/4] arm/dts: omap5-evm: Add keypad data   Koen Kooi
• [PATCH v6] ARM: mtd: nand: davinci: add OF support for davinci nand controller   Heiko Schocher
• [PATCH v7] ARM: davinci: i2c: add OF support   Heiko Schocher
• [PATCH] netdev/phy: skip disabled mdio-mux nodes   David Daney
• [PATCH] netdev/phy: skip disabled mdio-mux nodes   Timur Tabi
• [PATCH] driver: misc: bmp085: remove "of_match_table" property.   Warner Losh
• [PATCH v6] ARM: mtd: nand: davinci: add OF support for davinci nand controller   Sekhar Nori
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Thierry Reding
• [PATCH v3 1/2] lis3: add generic DT matching code   Daniel Mack
• [PATCH v3 3/7] mv643xx.c: Add basic device tree support.   Arnd Bergmann
• Endianness of multi-bit 'gpios' property?   Timur Tabi
• [PATCH 0/2] Add device tree support for davinci_mdio driver and fix cpsw DT binding documentation   David Miller
• [PATCH 0/8] *** ARM: Update arch-vt8500 to Devicetree ***   Tony Prisk
• [PATCH 1/8] arm: vt8500: Add device tree files for VIA/Wondermedia SoC's   Tony Prisk
• [PATCH 2/8] rtc: vt8500: Add devicetree support for vt8500-rtc   Tony Prisk
• [PATCH 3/8] serial: vt8500: Add devicetree support for vt8500-serial   Tony Prisk
• [PATCH 4/8] usb: vt8500: Add devicetree support for vt8500-ehci and -uhci.   Tony Prisk
• [PATCH 5/8] video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb   Tony Prisk
• [PATCH 6/8] arm: vt8500: Update arch-vt8500 to devicetree support.   Tony Prisk
• [PATCH 7/8] arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices   Tony Prisk
• [PATCH 8/8] ARM: vt8500: gpio: Devicetree support for arch-vt8500   Tony Prisk
• [PATCH 0/8] *** ARM: Update arch-vt8500 to Devicetree ***   Tony Prisk
• [PATCH v2 1/1] ARM: dove: DT support for sdhci-dove   Chris Ball
• [PATCH V3] dtc: Add ability to delete nodes and properties   Stephen Warren
• [PATCH v3 1/2] lis3: add generic DT matching code   AnilKumar, Chimata
• [PATCH v3 1/2] lis3: add generic DT matching code   Daniel Mack
• [PATCH 00/11] ARM/ASoC: OMAP McBSP device tree support   Peter Ujfalusi
• [PATCH 01/11] ARM/ASoC: omap-mcbsp: Move OMAP2+ clock parenting code to ASoC driver   Peter Ujfalusi
• [PATCH 02/11] ARM: OMAP2+: McBSP: Do not create legacy devices when booting with DT data   Peter Ujfalusi
• [PATCH 03/11] ARM: OMAP: mcbsp: Enable FIFO use for OMAP2430   Peter Ujfalusi
• [PATCH 04/11] ARM: OMAP: board-am3517evm: Configure McBSP1 CLKR/FSR signal source   Peter Ujfalusi
• [PATCH 05/11] ASoC: am3517evm: Do not configure McBSP1 CLKR/FSR signal muxing   Peter Ujfalusi
• [PATCH 06/11] ARM/ASoC: omap-mcbsp: Remove CLKR/FSR mux configuration code   Peter Ujfalusi
• [PATCH 07/11] ASoC: omap-mcbsp: Sidetone: Use SIDLE bits in SYSCONFIG register to select noidle mode   Peter Ujfalusi
• [PATCH 08/11] ARM: OMAP3: Remove callback for McBSP sidetone ICLK workaround   Peter Ujfalusi
• [PATCH 09/11] ASoC: omap-mcbsp: Remove unused defines   Peter Ujfalusi
• [PATCH 10/11] ASoC: omap-mcbsp: Remove cpu_is_omap* checks from the code   Peter Ujfalusi
• [PATCH 11/11] ASoC: omap-mcbsp: Add device tree bindings   Peter Ujfalusi
• [rtc-linux] [PATCH 8/8] ARM: vt8500: gpio: Devicetree support for arch-vt8500   Linus Walleij
• [rtc-linux] [PATCH 8/8] ARM: vt8500: gpio: Devicetree support for arch-vt8500   Arnd Bergmann
• [PATCH 00/11] MFD/ASoC/Input: twl4030-audio submodule DT support   Peter Ujfalusi
• [PATCH 01/11] MFD: twl4030-audio: Clean up MODULE_* and platform_driver part   Peter Ujfalusi
• [PATCH 02/11] MFD: twl4030-audio: Convert to use devm_kzalloc   Peter Ujfalusi
• [PATCH 03/11] MFD: twl4030-audio: Rearange and clean-up the probe function   Peter Ujfalusi
• [PATCH 04/11] MFD: twl4030-audio: Add DT support   Peter Ujfalusi
• [PATCH 05/11] Input: twl4030-vibra: Support for DT booted kernel   Peter Ujfalusi
• [PATCH 06/11] ASoC: twl4030: Move hs_extmute GPIO handling to driver   Peter Ujfalusi
• [PATCH 07/11] ARM: OMAP/ASoC: Zoom2: Let the codec to handle the hs_extmute GPIO   Peter Ujfalusi
• [PATCH 08/11] ASoC/MFD: twl4030: Remove set_hs_extmute callback from platform data   Peter Ujfalusi
• [PATCH 09/11] ASoC: twl4030: Convert to use devm_kzalloc   Peter Ujfalusi
• [PATCH 10/11] ASoC: twl4030: Add pointer to pdata within the private data   Peter Ujfalusi
• [PATCH 11/11] ASoC: twl4030: Support for DT booted kernel   Peter Ujfalusi
• <Query> Reg: Adding a gpio initialization sequence in dts is valid or not   Leela Krishna Amudala
• [PATCH 0/4] ASoC/OMAP: ASoC machine driver for simple SoC with twl4030   Peter Ujfalusi
• [PATCH 1/4] ASoC: omap-twl4030: Simple machine driver for TI SoC with twl4030 codec   Peter Ujfalusi
• [PATCH 2/4] ARM: OMAP: twl-common: Add helper function to register the omap-twl4030 audio driver   Peter Ujfalusi
• [PATCH 3/4] ARM: OMAP3: Switch to use the unified audio driver (omap-twl4030) for selected boards   Peter Ujfalusi
• [PATCH 4/4] ASoC: Remove obsolete OMAP3 machine drivers   Peter Ujfalusi
• [PATCH 00/11] ARM/ASoC: OMAP McBSP device tree support   Mark Brown
• [PATCH 04/11] MFD: twl4030-audio: Add DT support   Benoit Cousson
• OMAP: Configuring CONTROL_DEVCONF0 register via DT with pinctrl   Peter Ujfalusi
• [PATCH RESEND v2 1/2] arm/dts: Add AM33XX basic pinctrl support   Peter Ujfalusi
• [PATCH] powerpc/44x: Support OCM(On Chip Memory) for APM821xx SoC and Bluestone board   Josh Boyer
• [PATCH 3/4] ARM: OMAP3: Switch to use the unified audio driver (omap-twl4030) for selected boards   Igor Grinberg
• [PATCH 3/4] ARM: OMAP3: Switch to use the unified audio driver (omap-twl4030) for selected boards   Peter Ujfalusi
• [PATCH v2] of: Add videomode helper   Laurent Pinchart
• [PATCH v2] of: Add videomode helper   Laurent Pinchart
• [PATCH 04/11] MFD: twl4030-audio: Add DT support   Peter Ujfalusi
• [PATCH 04/11] MFD: twl4030-audio: Add DT support   Mark Brown
• [PATCH 3/4] ARM: OMAP3: Switch to use the unified audio driver (omap-twl4030) for selected boards   Igor Grinberg
• [PATCH 04/11] MFD: twl4030-audio: Add DT support   Mark Brown
• [PATCH 0/4] ASoC/OMAP: ASoC machine driver for simple SoC with twl4030   Mark Brown
• <Query> Reg: Adding a gpio initialization sequence in dts is valid or not   Rob Herring
• [PATCH v2 3/4] regulator: add a new API regulator_set_voltage_tol()   Mark Brown
• [PATCH 04/11] MFD: twl4030-audio: Add DT support   Peter Ujfalusi
• [PATCH 04/11] MFD: twl4030-audio: Add DT support   Mark Brown
• [alsa-devel] [PATCH 08/11] ARM: OMAP3: Remove callback for McBSP sidetone ICLK workaround   Peter Ujfalusi
• [PATCH 04/11] MFD: twl4030-audio: Add DT support   Peter Ujfalusi
• [PATCH 04/11] MFD: twl4030-audio: Add DT support   Mark Brown
• [rtc-linux] [PATCH 8/8] ARM: vt8500: gpio: Devicetree support for arch-vt8500   Linus Walleij
• [PATCH v2 3/4] regulator: add a new API regulator_set_voltage_tol()   Shawn Guo
• [PATCH 04/11] MFD: twl4030-audio: Add DT support   Peter Ujfalusi
• [PATCH 04/11] MFD: twl4030-audio: Add DT support   Peter Ujfalusi
• [PATCH 04/11] MFD: twl4030-audio: Add DT support   Mark Brown
• [PATCH 04/11] MFD: twl4030-audio: Add DT support   Mark Brown
• <Query> Reg: Adding a gpio initialization sequence in dts is valid or not   Stephen Warren
• [PATCH 04/11] MFD: twl4030-audio: Add DT support   Benoit Cousson
• [PATCH v6 7/7] ARM: davinci: add support for the am1808 based enbw_cmc board   Sekhar Nori
• [PATCH 8/8] ARM: vt8500: gpio: Devicetree support for arch-vt8500   Stephen Warren
• [PATCH 1/8] arm: vt8500: Add device tree files for VIA/Wondermedia SoC's   Stephen Warren
• [PATCH 5/8] video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb   Stephen Warren
• [PATCH 6/8] arm: vt8500: Update arch-vt8500 to devicetree support.   Stephen Warren
• [PATCH 8/8] ARM: vt8500: gpio: Devicetree support for arch-vt8500   Arnd Bergmann
• [PATCH 6/8] arm: vt8500: Update arch-vt8500 to devicetree support.   Tony Prisk
• [PATCH 5/8] video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb   Tony Prisk
• [rtc-linux] [PATCH 8/8] ARM: vt8500: gpio: Devicetree support for arch-vt8500   Tony Prisk
• [PATCH 1/8] arm: vt8500: Add device tree files for VIA/Wondermedia SoC's   Tony Prisk
• [PATCHv2 0/8] *** ARM: Update arch-vt8500 to Devicetree ***   Tony Prisk
• [PATCHv2 1/8] arm: vt8500: Add device tree files for VIA/Wondermedia SoC's   Tony Prisk
• [PATCHv2 2/8] rtc: vt8500: Add devicetree support for vt8500-rtc   Tony Prisk
• [PATCHv2 3/8] serial: vt8500: Add devicetree support for vt8500-serial   Tony Prisk
• [PATCHv2 4/8] usb: vt8500: Add devicetree support for vt8500-ehci and -uhci.   Tony Prisk
• [PATCHv2 5/8] video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb   Tony Prisk
• [PATCHv2 6/8] arm: vt8500: Update arch-vt8500 to devicetree support.   Tony Prisk
• [PATCHv2 7/8] arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices   Tony Prisk
• [PATCHv2 8/8] arm: vt8500: gpio: Devicetree support for arch-vt8500   Tony Prisk
• [PATCH v2] gpio: Add Avionic Design N-bit GPIO expander support   Thierry Reding
• OMAP: Configuring CONTROL_DEVCONF0 register via DT with pinctrl   Tony Lindgren
• [alsa-devel] [PATCH 07/11] ASoC: omap-mcbsp: Sidetone: Use SIDLE bits in SYSCONFIG register to select noidle mode   Peter Ujfalusi
• [PATCH v6 7/7] ARM: davinci: add support for the am1808 based enbw_cmc board   Heiko Schocher
• [PATCH v3 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Felipe Balbi
• [PATCH v3 2/5] usb: s3c-hsotg: Adding phy driver support   Felipe Balbi
• [PATCH 04/11] MFD: twl4030-audio: Add DT support   Peter Ujfalusi
• [PATCH 3/4] ARM: OMAP3: Switch to use the unified audio driver (omap-twl4030) for selected boards   Peter Ujfalusi
• [PATCH 04/11] MFD: twl4030-audio: Add DT support   Mark Brown
• [PATCH v2 3/4] regulator: add a new API regulator_set_voltage_tol()   Mark Brown
• [PATCH v3 0/7] mv643xx.c: Add basic device tree support.   Arnd Bergmann
• How to get the irq flags from the dts file   Arnd Bergmann
• [PATCH v2] usb: gadget: composite: parse dt values   Felipe Balbi
• [PATCH 2/3] mfd: twl6040: Add twl6040-gpio child   Mark Brown
• How to get the irq flags from the dts file   Mark Brown
• [PATCH 2/3] mfd: twl6040: Add twl6040-gpio child   Peter Ujfalusi
• [PATCH 3/4] ARM: OMAP3: Switch to use the unified audio driver (omap-twl4030) for selected boards   Igor Grinberg
• [PATCH 04/11] MFD: twl4030-audio: Add DT support   Peter Ujfalusi
• [PATCH 1/8] of/irq: Create stub for of_irq_find_parent when !CONFIG_OF   Rob Herring
• [PATCH V3] regulator: tps6586x: add support for SYS rail   Stephen Warren
• [PATCH V3] regulator: tps6586x: add support for SYS rail   Mark Brown
• [PATCH 1/8] of/irq: Create stub for of_irq_find_parent when !CONFIG_OF   Rob Herring
• [PATCH v2] gpio: Add Avionic Design N-bit GPIO expander support   Thierry Reding
• [PATCH v3 0/3] Add a generic cpufreq-cpu0 driver   Shawn Guo
• [PATCH v3 1/3] ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp   Shawn Guo
• [PATCH v3 2/3] PM / OPP: Initialize OPP table from device tree   Shawn Guo
• [PATCH v3 3/3] cpufreq: Add a generic cpufreq-cpu0 driver   Shawn Guo
• [PATCH v2 1/2] powerpc/mpic: Add Open-PIC global timer document   Dongsheng.wang at freescale.com
• [PATCH v3 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs   Felipe Balbi
• [PATCH 07/11] ARM: OMAP/ASoC: Zoom2: Let the codec to handle the hs_extmute GPIO   Tony Lindgren
• [PATCH 2/4] ARM: OMAP: twl-common: Add helper function to register the omap-twl4030 audio driver   Tony Lindgren
• [PATCH 3/4] ARM: OMAP3: Switch to use the unified audio driver (omap-twl4030) for selected boards   Tony Lindgren
• [PATCH 0/4] ASoC/OMAP: ASoC machine driver for simple SoC with twl4030   Tony Lindgren
• [PATCH v4 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   Felipe Balbi
• [PATCH v4 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs   Felipe Balbi
• [PATCH v4 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg   ABRAHAM, KISHON VIJAY
• [PATCH v4 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs   Felipe Balbi
• [PATCH v2] gpio: Add Avionic Design N-bit GPIO expander support   Linus Walleij
• [PATCH v2] gpio: Add Avionic Design N-bit GPIO expander support   Thierry Reding
• [PATCH v2] gpio: Add Avionic Design N-bit GPIO expander support   Linus Walleij
• [PATCH v2] gpio: Add Avionic Design N-bit GPIO expander support   Thierry Reding
• [PATCH v2] gpio: Add Avionic Design N-bit GPIO expander support   Russell King - ARM Linux
• DT GPIO numbering?   Johannes Stezenbach
• [PATCH v3 0/7] mv643xx.c: Add basic device tree support.   Arnd Bergmann
• [PATCH v2 1/2] powerpc/mpic: Add Open-PIC global timer document   Gala Kumar-B11780
• [alsa-devel] [PATCH 08/11] ARM: OMAP3: Remove callback for McBSP sidetone ICLK workaround   Peter Ujfalusi
• [PATCH v2 1/2] powerpc/mpic: Add Open-PIC global timer document   Scott Wood
• [PATCH v3 0/6] omap-am33xx rtc dt support   Sekhar Nori
• [PATCH v3 2/2] ARM: EXYNOS: Add Gscaler device from DT   Kukjin Kim
• [PATCH 04/11] MFD: twl4030-audio: Add DT support   Mark Brown
• [PATCH RESEND v2 1/2] arm/dts: Add AM33XX basic pinctrl support   AnilKumar, Chimata
• [PATCH v2 2/2] powerpc/mpic: add global timer support   Li Yang-R58472
• [PATCH v4 0/2] Add device tree and clock support for G-Scaler   Shaik Ameer Basha
• [PATCH v4 1/2] ARM: EXYNOS: Add clock support for G-Scaler   Shaik Ameer Basha
• [PATCH v4 2/2] ARM: EXYNOS: Adds G-Scaler device from Device Tree   Shaik Ameer Basha
• [PATCH v2 0/9] ARM/ASoC: OMAP McBSP device tree support   Peter Ujfalusi
• [PATCH v2 1/9] ARM/ASoC: omap-mcbsp: Move OMAP2+ clock parenting code to ASoC driver   Peter Ujfalusi
• [PATCH v2 2/9] ARM: OMAP: mcbsp: Enable FIFO use for OMAP2430   Peter Ujfalusi
• [PATCH v2 3/9] ARM: OMAP: board-am3517evm: Configure McBSP1 CLKR/FSR signal source   Peter Ujfalusi
• [PATCH v2 4/9] ASoC: am3517evm: Do not configure McBSP1 CLKR/FSR signal muxing   Peter Ujfalusi
• [PATCH v2 5/9] ARM/ASoC: omap-mcbsp: Remove CLKR/FSR mux configuration code   Peter Ujfalusi
• [PATCH v2 6/9] ASoC: omap-mcbsp: Remove unused defines   Peter Ujfalusi
• [PATCH v2 7/9] ASoC: omap-mcbsp: Remove cpu_is_omap* checks from the code   Peter Ujfalusi
• [PATCH v2 8/9] ARM: OMAP2+: McBSP: Do not create legacy devices when booting with DT data   Peter Ujfalusi
• [PATCH v2 9/9] ASoC: omap-mcbsp: Add device tree bindings   Peter Ujfalusi
• [PATCH v2 1/9] ARM/ASoC: omap-mcbsp: Move OMAP2+ clock parenting code to ASoC driver   Russell King - ARM Linux
• [PATCH v2 2/2] powerpc/mpic: add global timer support   Scott Wood
• [PATCH v2 1/2] powerpc/mpic: Add Open-PIC global timer document   Scott Wood
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Thierry Reding
• [PATCH V3] regulator: tps6586x: add support for SYS rail   Stephen Warren
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Stephen Warren
• [PATCH V3] regulator: tps6586x: add support for SYS rail   Mark Brown
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Thierry Reding
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Rob Herring
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Bjorn Helgaas
• [PATCH v3 05/10] resource: add PCI configuration space support   Bjorn Helgaas
• [PATCH v3 01/10] PCI: Keep pci_fixup_irqs() around after init   Bjorn Helgaas
• [PATCH v3 01/10] PCI: Keep pci_fixup_irqs() around after init   Thierry Reding
• [PATCH v3 05/10] resource: add PCI configuration space support   Thierry Reding
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Thierry Reding
• [PATCH v2 1/9] ARM/ASoC: omap-mcbsp: Move OMAP2+ clock parenting code to ASoC driver   Peter Ujfalusi
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Thierry Reding
• [PATCH] arm/dts: AM33XX: Set the default status of module to "disabled" state   AnilKumar, Chimata
• [PATCH] arm/dts: AM33XX: Set the default status of module to "disabled" state   Hiremath, Vaibhav
• [PATCH 1/8] of/irq: Create stub for of_irq_find_parent when !CONFIG_OF   Linus Walleij
• [PATCH v2 0/4] ASoC machine driver for simple SoC with twl4030   Peter Ujfalusi
• [PATCH v2 1/4] ASoC: omap-twl4030: Simple machine driver for TI SoC with twl4030 codec   Peter Ujfalusi
• [PATCH v2 2/4] ARM: OMAP: twl-common: Add helper function to register the omap-twl4030 audio driver   Peter Ujfalusi
• [PATCH v2 3/4] ARM: OMAP3: Switch to use the unified audio driver (omap-twl4030) for selected boards   Peter Ujfalusi
• [PATCH v2 4/4] ASoC: Remove obsolete OMAP3 machine drivers   Peter Ujfalusi
• [PATCHv7] arm/dts: omap4-sdp: Add keypad data   Benoit Cousson
• [PATCHv2 2/4] arm/dts: omap5-evm: Add tmp102 sensor support   Benoit Cousson
• [PATCHv2 2/4] arm/dts: omap5-evm: Add tmp102 sensor support   Felipe Balbi
• DT GPIO numbering?   Linus Walleij
• [PATCHv2 2/4] arm/dts: omap5-evm: Add tmp102 sensor support   Benoit Cousson
• [PATCHv2 0/4] Add device tree data for omap5   Benoit Cousson
• DT GPIO numbering?   Johannes Stezenbach
• [PATCH 02/23] of_spi: add generic binding support to specify cs gpio   Richard Genoud
• [PATCH 08/23] spi/atmel: add DT support   Richard Genoud
• [PATCH v2 00/14] MFD/ASoC/Input: twl4030-audio submodule DT support   Peter Ujfalusi
• [PATCH v2 01/14] MFD: twl4030-audio: Clean up MODULE_* and platform_driver part   Peter Ujfalusi
• [PATCH v2 02/14] MFD: twl4030-audio: Convert to use devm_kzalloc   Peter Ujfalusi
• [PATCH v2 03/14] MFD: twl4030-audio: Rearange and clean-up the probe function   Peter Ujfalusi
• [PATCH v2 04/14] MFD: twl-core: Add API to query the HFCLK rate   Peter Ujfalusi
• [PATCH v2 05/14] MFD: twl4030-audio: Get audio MCLK via twl-core API instead of pdata   Peter Ujfalusi
• [PATCH v2 06/14] dt: Add empty of_find_node_by_name() function   Peter Ujfalusi
• [PATCH v2 07/14] MFD: twl4030-audio: Add DT support   Peter Ujfalusi
• [PATCH v2 08/14] Input: twl4030-vibra: Support for DT booted kernel   Peter Ujfalusi
• [PATCH v2 09/14] ASoC: twl4030: Move hs_extmute GPIO handling to driver   Peter Ujfalusi
• [PATCH v2 10/14] ARM: OMAP/ASoC: Zoom2: Let the codec to handle the hs_extmute GPIO   Peter Ujfalusi
• [PATCH v2 11/14] ASoC/MFD: twl4030: Remove set_hs_extmute callback from platform data   Peter Ujfalusi
• [PATCH v2 12/14] ASoC: twl4030: Convert to use devm_kzalloc   Peter Ujfalusi
• [PATCH v2 13/14] ASoC: twl4030: Add pointer to pdata within the private data   Peter Ujfalusi
• [PATCH v2 14/14] ASoC: twl4030: Support for DT booted kernel   Peter Ujfalusi
• [PATCH v3 05/10] resource: add PCI configuration space support   Bjorn Helgaas
• [PATCH v3 05/10] resource: add PCI configuration space support   Thierry Reding
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Stephen Warren
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Thierry Reding
• [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support   Thierry Reding
• [PATCH v2 1/2] powerpc/mpic: Add Open-PIC global timer document   Scott Wood
• [PATCH v3 05/10] resource: add PCI configuration space support   Bjorn Helgaas
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Bjorn Helgaas
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Stephen Warren
• [PATCH 1/2] dt: introduce for_each_available_child_of_node, of_get_next_available_child   Timur Tabi
• [PATCH 2/2] [v2] netdev/phy: skip disabled mdio-mux nodes   Timur Tabi
• [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support   Bjorn Helgaas
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Stephen Warren
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Bjorn Helgaas
• [RFC:PATCH 3.6.0-rc1] dtc: Add -P option to dtc for Pre-Processing.   David Gibson
• [RFC:PATCH 3.6.0-rc1] dtc: Add -P option to dtc for Pre-Processing.   Tabi Timur-B04825
• [PATCH] pinctrl: imx5: start numbering pad from 0   Uwe Kleine-König
• [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support   Thierry Reding
• [PATCH v3 05/10] resource: add PCI configuration space support   Thierry Reding
• [PATCH] pinctrl: imx5: start numbering pad from 0   Dong Aisheng
• [PATCH] spi: spi-altera: Use of_match_ptr   Tobias Klauser
• [PATCH] pinctrl: imx5: start numbering pad from 0   Uwe Kleine-König
• [PATCH v3 1/2] lis3: add generic DT matching code   Daniel Mack
• [RFC RESEND 1/4] arm/dts: OMAP: Add timer nodes   Vaibhav Hiremath
• [RFC RESEND 2/4] ARM: OMAP3: Dynamically disable secure timer nodes for secure devices   Vaibhav Hiremath
• [PATCH] pinctrl: imx5: start numbering pad from 0   Dong Aisheng
• [PATCH] pinctrl: imx5: start numbering pad from 0   Dong Aisheng
• [PATCH-V2] arm/dts: AM33XX: Set the default status of module to "disabled" state   Vaibhav Hiremath
• [RFC:PATCH 3.6.0-rc1] dtc: Add -P option to dtc for Pre-Processing.   David Gibson
• [RFC:PATCH 3.6.0-rc1] dtc: Add -P option to dtc for Pre-Processing.   Tabi Timur-B04825
• [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support   Bjorn Helgaas
• [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support   Thierry Reding
• [PATCH v3 2/3] Input: add devicetree binding note for egalax_ts   Shawn Guo
• [PATCH v3 3/3] ARM: dts: imx6q-sabrelite: add eeti egalax   Shawn Guo
• [PATCH] spi: spi-altera: Use of_match_ptr   Rob Herring
• [RFC:PATCH dtc-1.3.0] dtc: Add --strip-disabled option to dtc.   Tabi Timur-B04825
• [PATCH] pinctrl: imx5: start numbering pad from 0   Shawn Guo
• [PATCH] spi: spi-altera: Use of_match_ptr   Mark Brown
• [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support   Bjorn Helgaas
• [PATCH 05/14] ARM: at91: add pinctrl support   Linus Walleij
• [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support   Thierry Reding
• [PATCH] pinctrl: imx5: start numbering pad from 0   Shawn Guo
• [PATCH] pinctrl: imx5: start numbering pad from 0   Stephen Warren
• [RFC:PATCH 3.6.0-rc1] dtc: Add -P option to dtc for Pre-Processing.   Mitch Bradley
• [PATCH v2 0/4] ASoC machine driver for simple SoC with twl4030   Mark Brown
• [PATCH] spi: spi-altera: Use of_match_ptr   Mark Brown
• [PATCH V4] mfd: add MAX8907 core driver   Stephen Warren
• [PATCH] pinctrl: imx5: start numbering pad from 0   Matt Sealey
• [PATCH v3 01/10] PCI: Keep pci_fixup_irqs() around after init   Bjorn Helgaas
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Stephen Warren
• [PATCH 5/8] video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb   Stephen Warren
• [PATCHv2 0/8] *** ARM: Update arch-vt8500 to Devicetree ***   Stephen Warren
• [PATCH v3 01/10] PCI: Keep pci_fixup_irqs() around after init   Thierry Reding
• [PATCH v3 01/10] PCI: Keep pci_fixup_irqs() around after init   Bjorn Helgaas
• [PATCH v3 01/10] PCI: Keep pci_fixup_irqs() around after init   Thierry Reding
• [PATCH v3 08/10] of/address: Handle #address-cells > 2 specially   Thierry Reding
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Thierry Reding
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Stephen Warren
• [PATCH 3/6] OF: pinctrl: MIPS: lantiq: adds support for FALCON SoC   John Crispin
• [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support   Thierry Reding
• [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support   Arnd Bergmann
• [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support   Bjorn Helgaas
• [PATCH] pinctrl: imx5: start numbering pad from 0   Dong Aisheng
• [PATCH] pinctrl: imx5: start numbering pad from 0   Shawn Guo
• [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support   Thierry Reding
• [PATCH v2 3/4] ARM: OMAP3: Switch to use the unified audio driver (omap-twl4030) for selected boards   Igor Grinberg
• [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support   Arnd Bergmann
• [PATCH v4 1/3] Runtime Interpreted Power Sequences   Thierry Reding
• [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support   Thierry Reding
• [PATCH 0/2] Move imx6q clock lookup over to device tree   Shawn Guo
• [PATCH 1/2] clk: add of_clk_src_onecell_get() support   Shawn Guo
• [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup   Shawn Guo
• [PATCH v4 1/3] Runtime Interpreted Power Sequences   Thierry Reding
• [PATCH V3 0/2] video: drm: Add Device tree support to DRM-FIMD   Leela Krishna Amudala
• [PATCH V3 1/2] drm/exynos: add platform_device_id table and driver data for exynos5 drm fimd   Leela Krishna Amudala
• [PATCH V3 2/2] video: drm: exynos: Add device tree support   Leela Krishna Amudala
• [PATCHv2 0/8] *** ARM: Update arch-vt8500 to Devicetree ***   Tony Prisk
• [PATCH v4 1/3] Runtime Interpreted Power Sequences   Thierry Reding
• [PATCH] ARM: EXYNOS: Add MFC device tree support   Thomas Abraham
• [PATCH v2 0/3] MFD/GPIO: Add twl6040 GPO driver   Peter Ujfalusi
• [PATCH v2 1/3] mfd: twl6040: Fix GPO mask   Peter Ujfalusi
• [PATCH v2 2/3] mfd: twl6040: Add twl6040-gpio child   Peter Ujfalusi
• [PATCH v2 3/3] gpio: Add basic support for TWL6040 GPOs   Peter Ujfalusi
• [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support   Thierry Reding
• [PATCH 0/6] Integrator devicetree support   Linus Walleij
• [PATCH 1/6] ARM: integrator: call common init function from machine   Linus Walleij
• [PATCH 2/6] ARM: integrator: check PL010 device name rather than base address   Linus Walleij
• [PATCH 3/6] ARM: plat-versatile: add DT support to FPGA IRQ controller   Linus Walleij
• [PATCH 4/6] ARM: integrator: initial device tree support   Linus Walleij
• [PATCH 5/6] ARM: integrator: convert AMBA devices to device tree   Linus Walleij
• [PATCH 6/6] ARM: integrator: convert platform devices to Device Tree   Linus Walleij
• [PATCH 05/14] ARM: at91: add pinctrl support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/4] Add device tree data for AM33XX devices   AnilKumar Ch
• [PATCH v4 1/4] arm/dts: AM33XX: Add basic pinctrl device tree data   AnilKumar Ch
• [PATCH v4 2/4] arm/dts: AM33XX: Configure pinmuxs for user leds control on Bone   AnilKumar Ch
• [PATCH v3 3/4] arm/dts: AM33XX: Configure pinmuxs for D_CAN1 on AM335x-EVM   AnilKumar Ch
• [PATCH v3 4/4] arm/dts: AM33XX: Add D_CAN device tree data   AnilKumar Ch
• [PATCH 5/6] ARM: integrator: convert AMBA devices to device tree   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3 0/9] ARM/ASoC: OMAP McBSP device tree support   Peter Ujfalusi
• [PATCH v3 1/9] ARM/ASoC: omap-mcbsp: Move OMAP2+ clock parenting code to ASoC driver   Peter Ujfalusi
• [PATCH v3 2/9] ARM: OMAP: mcbsp: Enable FIFO use for OMAP2430   Peter Ujfalusi
• [PATCH v3 3/9] ARM: OMAP: board-am3517evm: Configure McBSP1 CLKR/FSR signal source   Peter Ujfalusi
• [PATCH v3 4/9] ASoC: am3517evm: Do not configure McBSP1 CLKR/FSR signal muxing   Peter Ujfalusi
• [PATCH v3 5/9] ARM/ASoC: omap-mcbsp: Remove CLKR/FSR mux configuration code   Peter Ujfalusi
• [PATCH v3 6/9] ASoC: omap-mcbsp: Remove unused defines   Peter Ujfalusi
• [PATCH v3 7/9] ASoC: omap-mcbsp: Remove cpu_is_omap* checks from the code   Peter Ujfalusi
• [PATCH v3 8/9] ARM: OMAP2+: McBSP: Do not create legacy devices when booting with DT data   Peter Ujfalusi
• [PATCH v3 9/9] ASoC: omap-mcbsp: Add device tree bindings   Peter Ujfalusi
• [PATCH 0/6] Integrator devicetree support   Arnd Bergmann
• [PATCH 1/6] ARM: integrator: call common init function from machine   Arnd Bergmann
• [PATCH 3/6] ARM: plat-versatile: add DT support to FPGA IRQ controller   Arnd Bergmann
• [PATCH 5/6] ARM: integrator: convert AMBA devices to device tree   Arnd Bergmann
• [PATCH v4 1/3] Runtime Interpreted Power Sequences   Mark Brown
• [RFC RESEND 1/4] arm/dts: OMAP: Add timer nodes   Jon Hunter
• [PATCH 05/14] ARM: at91: add pinctrl support   Warner Losh
• [PATCH v3 05/10] resource: add PCI configuration space support   Stephen Warren
• [PATCH v3 06/25] docs: Xen ARM DT bindings   Stefano Stabellini
• [PATCH] mmc: sdhci-s3c: Add device tree support   Chris Ball
• [PATCH] mmc: sdhci-s3c: Add device tree support   Thomas Abraham
• [PATCH] mmc: sdhci-s3c: Add device tree support   Thomas Abraham
• [PATCH] mmc: sdhci-s3c: Add device tree support   Chris Ball
• [PATCH] mmc: sdhci-s3c: Add device tree support   Thomas Abraham
• [PATCH] mmc: sdhci-s3c: Add device tree support   Thomas Abraham
• [PATCH] mmc: sdhci-s3c: Add device tree support   Chris Ball
• [RFC RESEND 2/4] ARM: OMAP3: Dynamically disable secure timer nodes for secure devices   Jon Hunter
• [PATCH] ARM: dts: use generic mmc properties for Samsung Exynos4210 sdhci nodes   Thomas Abraham
• [patch] driver-core: dev_to_node() should handle NULL pointers   Greg Kroah-Hartman
• [PATCH] pinctrl: imx5: start numbering pad from 0   Matt Sealey
• [PATCH v3 05/10] resource: add PCI configuration space support   Thierry Reding
• [PATCH] mmc: sdhci-s3c: Add device tree support   Thomas Abraham
• [PATCH v4 1/3] Runtime Interpreted Power Sequences   Stephen Warren
• [PATCH v4 2/3] pwm_backlight: use power sequences   Stephen Warren
• [PATCH v4 3/3] tegra: add pwm backlight device tree nodes   Stephen Warren
• [PATCH v4 1/3] Runtime Interpreted Power Sequences   Mark Brown
• [PATCH] pinctrl: imx5: start numbering pad from 0   Matt Sealey
• [PATCH v4 1/3] Runtime Interpreted Power Sequences   Stephen Warren
• Device tree node names   Stephen Warren
• [PATCH v4 1/3] Runtime Interpreted Power Sequences   Stephen Warren
• dynamic device tree char driver   Alan Tull
• [PATCH 1/1] dynamic device tree char driver   Alan Tull
• [PATCH v4 1/3] Runtime Interpreted Power Sequences   Thierry Reding
• [PATCH v3 2/3] PM / OPP: Initialize OPP table from device tree   Rafael J. Wysocki
• [PATCH v4 1/3] Runtime Interpreted Power Sequences   Mitch Bradley
• [PATCH] pinctrl: imx5: start numbering pad from 0   Stephen Warren
• Device tree node names   Mitch Bradley
• Associating devices with multiple parents   Mitch Bradley
• [PATCH v4 0/3] Runtime Interpreted Power Sequences   Rafael J. Wysocki
• Associating devices with multiple parents   Grant Likely
• [PATCH v4 1/3] Input: egalax_ts: get gpio from devicetree node   Shawn Guo
• [PATCH v4 2/3] Input: add devicetree binding note for egalax_ts   Shawn Guo
• [PATCH v4 3/3] ARM: dts: imx6q-sabrelite: add eeti egalax   Shawn Guo
• [PATCH V3 1/2] drm/exynos: add platform_device_id table and driver data for exynos5 drm fimd   Joonyoung Shim
• [PATCH v3 2/3] PM / OPP: Initialize OPP table from device tree   Shawn Guo
• [PATCH V3 2/2] video: drm: exynos: Add device tree support   Joonyoung Shim
• [PATCH v3 2/3] PM / OPP: Initialize OPP table from device tree   Rob Herring
• [RFC RESEND 2/4] ARM: OMAP3: Dynamically disable secure timer nodes for secure devices   Hiremath, Vaibhav
• [RFC:PATCH dtc-1.3.0] dtc: Add --strip-disabled option to dtc.   David Gibson
• [PATCH] mmc: sdhci-s3c: Add device tree support   Tushar Behera
• [PATCH] mmc: sdhci-s3c: Add device tree support   Heiko Stübner
• [RFC:PATCH dtc-1.3.0] dtc: Add --strip-disabled option to dtc.   Srinivas KANDAGATLA
• [PATCH 0/2] mfd: dt: add power off support for Tegra20/Tegra30   Bill Huang
• [PATCH 1/2] mfd: dt: tps6586x: Add power off control   Bill Huang
• [PATCH 2/2] mfd: dt: tps65910: add power off control   Bill Huang
• [PATCH V3 1/2] drm/exynos: add platform_device_id table and driver data for exynos5 drm fimd   Leela Krishna Amudala
• [PATCH V3 2/2] video: drm: exynos: Add device tree support   Leela Krishna Amudala
• [PATCH v3 0/9] ARM/ASoC: OMAP McBSP device tree support   Mark Brown
• <Query> Reg: Adding a gpio initialization sequence in dts is valid or not   Leela Krishna Amudala
• Associating devices with multiple parents   Mark Brown
• [PATCH 1/2] mfd: dt: tps6586x: Add power off control   Thierry Reding
• [PATCH 2/2] mfd: dt: tps65910: add power off control   Thierry Reding
• Device tree node names   Mark Brown
• [PATCH v3 0/7] mv643xx.c: Add basic device tree support.   Arnd Bergmann
• [RFC:PATCH dtc-1.3.0] dtc: Add --strip-disabled option to dtc.   Tabi Timur-B04825
• [RFC RESEND 2/4] ARM: OMAP3: Dynamically disable secure timer nodes for secure devices   Jon Hunter
• [PATCH v3 1/9] ARM/ASoC: omap-mcbsp: Move OMAP2+ clock parenting code to ASoC driver   Tony Lindgren
• [PATCH v3 2/9] ARM: OMAP: mcbsp: Enable FIFO use for OMAP2430   Tony Lindgren
• [PATCH v3 3/9] ARM: OMAP: board-am3517evm: Configure McBSP1 CLKR/FSR signal source   Tony Lindgren
• [PATCH v3 4/9] ASoC: am3517evm: Do not configure McBSP1 CLKR/FSR signal muxing   Tony Lindgren
• [PATCH v3 5/9] ARM/ASoC: omap-mcbsp: Remove CLKR/FSR mux configuration code   Tony Lindgren
• [PATCH v3 8/9] ARM: OMAP2+: McBSP: Do not create legacy devices when booting with DT data   Tony Lindgren
• [PATCH v3 0/9] ARM/ASoC: OMAP McBSP device tree support   Tony Lindgren
• Device tree node names   Mitch Bradley
• [PATCH v2] mtd: physmap_of: Add "no-unaligned-direct-access" DT property   Stefan Roese
• [PATCH v3 2/9] ARM: OMAP: mcbsp: Enable FIFO use for OMAP2430   Peter Ujfalusi
• [RFC:PATCH dtc-1.3.0] dtc: Add --strip-disabled option to dtc.   Srinivas KANDAGATLA
• <Query> Reg: Adding a gpio initialization sequence in dts is valid or not   Stephen Warren
• [PATCH 2/2] ahci_platform: add custom hard reset for Calxeda ahci ctrlr   Rob Herring
• [RFC:PATCH dtc-1.3.0] dtc: Add --strip-disabled option to dtc.   Timur Tabi
• [PATCH 1/2] mfd: dt: tps6586x: Add power off control   Stephen Warren
• [PATCH 2/2] mfd: dt: tps65910: add power off control   Stephen Warren
• [PATCH 1/2] mfd: dt: tps6586x: Add power off control   Bill Huang
• [PATCH v4 1/3] Runtime Interpreted Power Sequences   Mark Brown
• [PATCH v3 2/9] ARM: OMAP: mcbsp: Enable FIFO use for OMAP2430   Tony Lindgren
• dynamic device tree char driver   Rob Herring
• [patch] video: mb862xxfb: prevent divide by zero bug   Dan Carpenter
• [PATCH v3 2/9] ARM: OMAP: mcbsp: Enable FIFO use for OMAP2430   Ujfalusi, Peter
• [patch] video: mb862xxfb: prevent divide by zero bug   Anatolij Gustschin
• [PATCH 3/6] OF: pinctrl: MIPS: lantiq: adds support for FALCON SoC   Linus Walleij
• [PATCH 5/6] ARM: integrator: convert AMBA devices to device tree   Linus Walleij
• [PATCH 0/6] Integrator devicetree support   Linus Walleij
• [PATCH 0/6] Integrator devicetree support   Arnd Bergmann
• [PATCH 0/6] Integrator devicetree support   Nicolas Pitre
• [PATCH v2 0/2] mfd: dt: add power off support for Tegra20/Tegra30   Bill Huang
• [PATCH v2 1/2] mfd: dt: tps6586x: Add power off control   Bill Huang
• [PATCH v2 2/2] mfd: dt: tps65910: add power off control   Bill Huang
• [PATCH] ARM: EXYNOS: Add MFC device tree support   Karol Lewandowski
• [PATCH v3 2/9] ARM: OMAP: mcbsp: Enable FIFO use for OMAP2430   Tony Lindgren
• [PATCH 5/6] ARM: integrator: convert AMBA devices to device tree   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 00/11] pinctrl: mvebu: pinctrl driver   Linus Walleij
• [RFC:PATCH dtc-1.3.0] dtc: Add --strip-disabled option to dtc.   Srinivas KANDAGATLA
• [RFC PATCH] dtc: integrate gpp   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/11] pinctrl: mvebu: pinctrl driver core   Linus Walleij
• [PATCH 1/2] dt: introduce for_each_available_child_of_node, of_get_next_available_child   David Miller
• [PATCH 2/2] [v2] netdev/phy: skip disabled mdio-mux nodes   David Miller
• [PATCH v2 dtc-1.3.0] dtc: Add --strip-disabled option to dtc(v2).   Srinivas KANDAGATLA
• [PATCH v2 1/2] mfd: dt: tps6586x: Add power off control   Thierry Reding
• [PATCHv7] arm/dts: omap4-sdp: Add keypad data   Felipe Balbi
• [PATCHv7] arm/dts: omap4-sdp: Add keypad data   Benoit Cousson
• [PATCHv3 0/4] Add device tree data for omap5   Benoit Cousson
• [PATCHv3 0/4] Add device tree data for omap5   Benoit Cousson
• [RFC:PATCH dtc-1.3.0] dtc: Add --strip-disabled option to dtc.   Tabi Timur-B04825
• [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup   Rob Herring
• [PATCH RESEND v4] spi/pl022: add devicetree support   Roland Stigge
• [PATCH RESEND v4] spi/pl022: add devicetree support   Rob Herring
• [PATCH RESEND v4] spi/pl022: add devicetree support   Roland Stigge
• [PATCH v2 dtc-1.3.0] dtc: Add --strip-disabled option to dtc(v2).   Jon Loeliger
• [PATCH 02/11] pinctrl: mvebu: dove pinctrl driver   Linus Walleij
• [PATCH 03/11] pinctrl: mvebu: kirkwood pinctrl driver   Linus Walleij
• [PATCH 01/11] pinctrl: mvebu: pinctrl driver core   Linus Walleij
• [PATCH 01/11] pinctrl: mvebu: pinctrl driver core   Linus Walleij
• [PATCH RESEND v4] spi/pl022: add devicetree support   Rob Herring
• [PATCH 04/11] pinctrl: mvebu: add pinctrl driver for Armada 370   Linus Walleij
• [PATCH 05/11] pinctrl: mvebu: add pinctrl driver for Armada XP   Linus Walleij
• [PATCH 06/11] ARM: mvebu: add pinctrl device in DT for Armada 370/XP SoCs   Linus Walleij
• [PATCH 07/11] ARM: mvebu: Add pinctrl support to Armada XP SoCs   Linus Walleij
• [PATCH 08/11] ARM: mvebu: Add pinctrl support to Armada 370 SoC   Linus Walleij
• [PATCH 09/11] ARM: mvebu: adjust Armada XP evaluation board DTS   Linus Walleij
• [PATCH 10/11] arm: mvebu: enable PINCTRL usage   Linus Walleij
• [PATCH 1/2] clk: add of_clk_src_onecell_get() support   Shawn Guo
• [PATCH 11/11] arm: mvebu: add pinctrl support in defconfig   Linus Walleij
• [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup   Matt Sealey
• [PATCH RESEND v4] spi/pl022: add devicetree support   Linus Walleij
• [PATCH RESEND v4] spi/pl022: add devicetree support   Linus Walleij
• [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup   Shawn Guo
• [PATCH v2 dtc-1.3.0] dtc: Add --strip-disabled option to dtc(v2).   Srinivas KANDAGATLA
• [PATCH RESEND v4] spi/pl022: add devicetree support   Roland Stigge
• [PATCH RESEND v4] spi/pl022: add devicetree support   Rob Herring
• [RFC:PATCH dtc-1.3.0] dtc: Add --strip-disabled option to dtc.   Scott Wood
• [RFC:PATCH dtc-1.3.0] dtc: Add --strip-disabled option to dtc.   Timur Tabi
• [RFC:PATCH dtc-1.3.0] dtc: Add --strip-disabled option to dtc.   Scott Wood
• [PATCH v2 dtc-1.3.0] dtc: Add --strip-disabled option to dtc(v2).   Timur Tabi
• [RFC:PATCH dtc-1.3.0] dtc: Add --strip-disabled option to dtc.   Mitch Bradley
• [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup   Matt Sealey
• [RFC:PATCH dtc-1.3.0] dtc: Add --strip-disabled option to dtc.   David Gibson
• [RFC:PATCH dtc-1.3.0] dtc: Add --strip-disabled option to dtc.   David Gibson
• [RFC:PATCH dtc-1.3.0] dtc: Add --strip-disabled option to dtc.   David Gibson
• [PATCH v2 dtc-1.3.0] dtc: Add --strip-disabled option to dtc(v2).   David Gibson
• [PATCH v4 1/3] Runtime Interpreted Power Sequences   Tomi Valkeinen
• [PATCH v4 1/3] Runtime Interpreted Power Sequences   Alex Courbot
• [PATCH v4 1/3] Runtime Interpreted Power Sequences   Thierry Reding
• [PATCH v4 1/3] Runtime Interpreted Power Sequences   Alex Courbot
• [PATCH v4 1/3] Runtime Interpreted Power Sequences   Tomi Valkeinen
• [PATCH v4 1/3] Runtime Interpreted Power Sequences   Thierry Reding
• [PATCH v4 1/3] Runtime Interpreted Power Sequences   Tomi Valkeinen
• [PATCH 1/2] input: samsung-keypad: Use of_match_ptr()   Tobias Klauser
• [PATCH 2/4] Input: keypad: Add smsc ece1099 keypad driver   Felipe Balbi
• [PATCH 2/4] Input: keypad: Add smsc ece1099 keypad driver   Felipe Balbi
• [PATCH 3/4] arm/dts: omap5-evm: Add keypad support   Felipe Balbi
• [RFC/PATCH 4/4] gpio: smscece: Add support for gpio IO expander feature   Felipe Balbi
• [PATCH] mmc: dt: Add 'broken-cd' DT binding   Arnd Bergmann
• [PATCH] mmc: dt: Add 'broken-cd' DT binding   Thomas Abraham
• [PATCH] mmc: dt: Add 'broken-cd' DT binding   Thomas Abraham
• [PATCH] mmc: dt: Add 'broken-cd' DT binding   Chris Ball
• [PATCH] mmc: dt: Add 'broken-cd' DT binding   Thomas Abraham
• [PATCH] mmc: dt: Add 'broken-cd' DT binding   Chris Ball
• [RFC/PATCH 4/4] gpio: smscece: Add support for gpio IO expander feature   Felipe Balbi
• [PATCH] mmc: dt: Add 'broken-cd' DT binding   Arnd Bergmann
• [RFC/PATCH 4/4] gpio: smscece: Add support for gpio IO expander feature   Felipe Balbi
• [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup   Russell King - ARM Linux
• [PATCH] mmc: dt: Add 'broken-cd' DT binding   Thomas Abraham
• [PATCH 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver   Mark Brown
• [PATCH 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver   Felipe Balbi
• [PATCH] pinctrl: imx5: start numbering pad from 0   Linus Walleij
• [PATCH] pinctrl: imx5: start numbering pad from 0   Linus Walleij
• [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup   Rob Herring
• [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup   Rob Herring
• [PATCH 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver   Mark Brown
• [PATCH] serial: pl011: honour serial aliases in device tree   Rob Herring
• [PATCH 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver   Felipe Balbi
• [PATCH 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver   Mark Brown
• [PATCH 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver   Felipe Balbi
• [PATCH 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver   Mark Brown
• [PATCH 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver   Felipe Balbi
• [PATCH 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver   Mark Brown
• [PATCH] mmc: dt: Add 'broken-cd' DT binding   Rob Herring
• [PATCH] ASoC: omap-mcbsp: Device tree binding documentation update   Peter Ujfalusi
• dynamic device tree char driver   Alan Tull
• [PATCH] mmc: dt: Add 'broken-cd' DT binding   Chris Ball
• [RFC/PATCH 4/4] gpio: smscece: Add support for gpio IO expander feature   Mark Brown
• [PATCH] mmc: dt: Add 'broken-cd' DT binding   Rob Herring
• [PATCH] mmc: dt: Add 'broken-cd' DT binding   Chris Ball
• [PATCH] mmc: dt: Add 'broken-cd' DT binding   Thomas Abraham
• [PATCH v5 1/2] spi/pl022: Add chip select handling via GPIO   Roland Stigge
• [PATCH v5 1/2] spi/pl022: Add chip select handling via GPIO   Roland Stigge
• [PATCH v5 2/2] spi/pl022: Add devicetree support   Roland Stigge
• [PATCH] mmc: dt: Add 'broken-cd' DT binding   Rob Herring
• dynamic device tree char driver   Rob Herring
• [PATCH v4 1/3] Runtime Interpreted Power Sequences   Mark Brown
• [PATCH] mmc: dt: Add 'broken-cd' DT binding   Thomas Abraham
• [PATCH v2] devicetree: pwm: mxs-pwm.txt: Fix reg field annotation   Rob Herring
• [PATCH v2] devicetree: serial: Add documentation for imx serial   Rob Herring
• [PATCH] mmc: dt: Add 'broken-cd' DT binding   Mitch Bradley
• dynamic device tree char driver   Alan Tull
• [PATCH 2/2] spi: Add SPI master controller for OCTEON SOCs.   David Daney
• [2/2] spi: Add SPI master controller for OCTEON SOCs.   David Daney
• [PATCH v2] serial: pl011: honour serial aliases in device tree   Will Deacon
• [PATCHv3 0/9] *** ARM: Update arch-vt8500 to Devicetree ***   Tony Prisk
• [PATCHv3 1/9] arm: vt8500: Add device tree files for VIA/Wondermedia SoC's   Tony Prisk
• [PATCHv3 2/9] rtc: vt8500: Add devicetree support for vt8500-rtc   Tony Prisk
• [PATCHv3 3/9] serial: vt8500: Add devicetree support for vt8500-serial   Tony Prisk
• [PATCHv3 4/9] usb: vt8500: Add devicetree support for vt8500-ehci and -uhci.   Tony Prisk
• [PATCHv3 5/9] video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb   Tony Prisk
• [PATCHv3 6/9] arm: vt8500: Update arch-vt8500 to devicetree support.   Tony Prisk
• [PATCHv3 7/9] arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices   Tony Prisk
• [PATCHv3 8/9] arm: vt8500: gpio: Devicetree support for arch-vt8500   Tony Prisk
• [PATCHv3 9/9] arm: vt8500: clk: Add Common Clock Framework support   Tony Prisk
• [PATCH v2] serial: pl011: honour serial aliases in device tree   Linus Walleij
• [PATCHv3 3/9] serial: vt8500: Add devicetree support for vt8500-serial   Alan Cox
• [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup   Shawn Guo
• [PATCH REPOST] dtc: integrate gpp   Stephen Warren
• [PATCH V3] dtc: Add ability to delete nodes and properties   Stephen Warren
• [PATCH v2] devicetree: serial: Add documentation for imx serial   Shawn Guo
• [PATCH] devicetree: serial: Add documentation for mxs auart   Shawn Guo
• [PATCH v4 1/3] Runtime Interpreted Power Sequences   Thierry Reding
• [PATCH] mmc: dt: Add 'broken-cd' DT binding   Shawn Guo
• [PATCH] mmc: dt: Add 'broken-cd' DT binding   Shawn Guo
• [PATCHv3 3/9] serial: vt8500: Add devicetree support for   Tony Prisk
• [PATCHv3 3/9] serial: vt8500: Add devicetree support for   Arnd Bergmann
• [PATCH 0/7] add imx-syscon driver for general registers access   Dong Aisheng
• [PATCH 1/7] mfd: add imx syscon driver based on regmap   Dong Aisheng
• [PATCH 2/7] ARM: imx6q: add iomuxc gpr support into imx-syscon   Dong Aisheng
• [PATCH 3/7] ARM: imx6q: add anatop support into imx-syscon   Dong Aisheng
• [PATCH 4/7] regulator: anatop-regulator: convert to use imx-syscon to access anatop register   Dong Aisheng
• [PATCH 5/7] ARM: imx6q: convert to use imx-syscon to access anatop registers   Dong Aisheng
• [PATCH 6/7] ARM: dts: imx6q: add simple-bus compatible string for anatop   Dong Aisheng
• [PATCH 7/7] mfd: anatop-mfd: remove anatop driver   Dong Aisheng
• [PATCH 1/7] mfd: add imx syscon driver based on regmap   Richard Zhao
• [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup   Russell King - ARM Linux
• [RESEND PATCH v4 0/2] omap: add ocp2scp as a bus driver   Kishon Vijay Abraham I
• [RESEND PATCH v4 1/2] drivers: bus: add a new driver for omap-ocp2scp   Kishon Vijay Abraham I
• [RESEND PATCH v4 2/2] arm/dts: omap4: Add ocp2scp data   Kishon Vijay Abraham I
• [PATCH 6/7] ARM: dts: imx6q: add simple-bus compatible string for anatop   Richard Zhao
• [rtc-linux] [PATCHv3 8/9] arm: vt8500: gpio: Devicetree support for arch-vt8500   Linus Walleij
• [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup   Shawn Guo
• [PATCH] mmc: dt: Add 'broken-cd' DT binding   Chris Ball
• [PATCH] mmc: dt: Add 'broken-cd' DT binding   Thomas Abraham
• [PATCH 1/7] mfd: add imx syscon driver based on regmap   Dong Aisheng
• [PATCH 6/7] ARM: dts: imx6q: add simple-bus compatible string for anatop   Dong Aisheng
• [PATCH] mmc: dt: Add 'broken-cd' DT binding   Chris Ball
• [PATCH v5 1/2] spi/pl022: Add chip select handling via GPIO   Linus Walleij
• [PATCH v5 2/2] spi/pl022: Add devicetree support   Linus Walleij
• [PATCH] mmc: dt: Add 'broken-cd' DT binding   Thomas Abraham
• [PATCH v2 1/2] mfd: dt: tps6586x: Add power off control   Bill Huang
• [PATCH] mmc: dt: Add 'broken-cd' DT binding   Shawn Guo
• [RESEND PATCH v4 0/2] omap: add ocp2scp as a bus driver   Arnd Bergmann
• [RESEND PATCH v4 0/2] omap: add ocp2scp as a bus driver   ABRAHAM, KISHON VIJAY
• [rtc-linux] [PATCHv3 8/9] arm: vt8500: gpio: Devicetree support for arch-vt8500   Tony Prisk
• [PATCH v2 0/4] Move imx6q/28/23 clock lookup over to device tree   Shawn Guo
• [PATCH v2 1/4] clk: add of_clk_src_onecell_get() support   Shawn Guo
• [PATCH v2 2/4] ARM: imx6q: replace clk_register_clkdev with clock DT lookup   Shawn Guo
• [PATCH v2 3/4] clk: mxs: replace imx28 clk_register_clkdev with clock DT lookup   Shawn Guo
• [PATCH v2 4/4] clk: mxs: replace imx23 clk_register_clkdev with clock DT lookup   Shawn Guo
• [PATCH v6 1/3] spi/pl022: Add chip select handling via GPIO   Roland Stigge
• [PATCH v6 2/3] spi/pl022: Add devicetree support   Roland Stigge
• [PATCH v6 3/3] DT bindings documentation: "num-cs" property for SPI controllers   Roland Stigge
• [PATCH] mmc: dt: Add 'broken-cd' DT binding   Chris Ball
• [PATCH] mmc: dt: Add 'broken-cd' DT binding   Chris Ball
• [PATCH] mmc: dt: Add 'broken-cd' DT binding   Stephen Warren
• [PATCH] mmc: dt: Add 'broken-cd' DT binding   Chris Ball
• [PATCH] mmc: dt: Add 'broken-cd' DT binding   Thomas Abraham
• Device tree node names   Stephen Warren
• [PATCH 05/14] ARM: at91: add pinctrl support   Stephen Warren
• Can one set GPIO direction in pinmux definition?   Subodh Nijsure
• [PATCH 4/7] regulator: anatop-regulator: convert to use imx-syscon to access anatop register   Mark Brown
• [PATCH 1/7] mfd: add imx syscon driver based on regmap   Mark Brown
• [PATCH] mmc: dt: Add 'broken-cd' DT binding   Mitch Bradley
• [PATCH] mmc: dt: Add card-detection properties to core binding.   Chris Ball
• Device tree node names   Rob Herring
• [PATCH] spi: Master driver for NXP SC18IS602/603   Mark Brown
• [PATCH v6 1/3] spi/pl022: Add chip select handling via GPIO   Linus Walleij
• [PATCH v6 2/3] spi/pl022: Add devicetree support   Linus Walleij
• [PATCH v6 3/3] DT bindings documentation: "num-cs" property for SPI controllers   Linus Walleij
• [PATCH v6 3/3] DT bindings documentation: "num-cs" property for SPI controllers   Mark Brown
• [PATCH 0/2] SPI EEPROM / device tree interaction improvements.   David Daney
• [PATCH 1/2] misc/at25, dt: Improve at25 SPI eeprom device tree bindings.   David Daney
• [PATCH 2/2] misc/at25: Add an .id_table to at25 to facilitate driver loading and binding.   David Daney
• [PATCH v3 1/9] ARM/ASoC: omap-mcbsp: Move OMAP2+ clock parenting code to ASoC driver   Mark Brown
• [PATCH v3 2/9] ARM: OMAP: mcbsp: Enable FIFO use for OMAP2430   Mark Brown
• [PATCH v3 3/9] ARM: OMAP: board-am3517evm: Configure McBSP1 CLKR/FSR signal source   Mark Brown
• [PATCH v3 4/9] ASoC: am3517evm: Do not configure McBSP1 CLKR/FSR signal muxing   Mark Brown
• [PATCH v3 5/9] ARM/ASoC: omap-mcbsp: Remove CLKR/FSR mux configuration code   Mark Brown
• [PATCH v3 6/9] ASoC: omap-mcbsp: Remove unused defines   Mark Brown
• [PATCH v3 7/9] ASoC: omap-mcbsp: Remove cpu_is_omap* checks from the code   Mark Brown
• [PATCH v3 8/9] ARM: OMAP2+: McBSP: Do not create legacy devices when booting with DT data   Mark Brown
• [PATCH v3 9/9] ASoC: omap-mcbsp: Add device tree bindings   Mark Brown
• [PATCH] ASoC: omap-mcbsp: Device tree binding documentation update   Mark Brown
• [PATCH] spi: Master driver for NXP SC18IS602/603   Mark Brown
• Can one set GPIO direction in pinmux definition?   Stephen Warren
• [PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core   Stephen Warren
• [PATCH v2 7/9] ARM: mvebu: Add pinctrl support to Armada XP SoCs   Stephen Warren
• [PATCH v2 8/9] ARM: mvebu: Add pinctrl support to Armada 370 SoC   Stephen Warren
• [PATCH v3 2/9] ARM: OMAP: mcbsp: Enable FIFO use for OMAP2430   Tony Lindgren
• [PATCHv3 7/9] arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices   Stephen Warren
• [PATCHv3 7/9] arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices   Tony Prisk
• Can one set GPIO direction in pinmux definition?   Subodh Nijsure
• [PATCH] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped FPGA   David Daney
• [PATCH] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped FPGA   Timur Tabi
• [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup   Matt Sealey
• [PATCH] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped FPGA   David Daney
• Can one set GPIO direction in pinmux definition?   Stephen Warren
• [PATCH] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped FPGA   Tabi Timur-B04825
• [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup   Matt Sealey
• Can one set GPIO direction in pinmux definition?   Matt Sealey
• [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup   Rob Herring
• Can one set GPIO direction in pinmux definition?   Shawn Guo
• [PATCH v2 1/4] clk: add of_clk_src_onecell_get() support   Rob Herring
• [PATCH 1/7] mfd: add imx syscon driver based on regmap   Stephen Warren
• [PATCH 4/7] regulator: anatop-regulator: convert to use imx-syscon to access anatop register   Stephen Warren
• [PATCH 1/7] mfd: add imx syscon driver based on regmap   Richard Zhao
• [PATCH 4/7] regulator: anatop-regulator: convert to use imx-syscon to access anatop register   Richard Zhao
• [PATCH] mmc: dt: Add 'broken-cd' DT binding   Thomas Abraham
• [PATCH 05/14] ARM: at91: add pinctrl support   Richard Genoud
• [PATCH 1/7] mfd: add imx syscon driver based on regmap   Dong Aisheng
• [PATCH 4/7] regulator: anatop-regulator: convert to use imx-syscon to access anatop register   Dong Aisheng
• [PATCH 1/7] mfd: add imx syscon driver based on regmap   Dong Aisheng
• [PATCH 4/7] regulator: anatop-regulator: convert to use imx-syscon to access anatop register   Dong Aisheng
• [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***   Tony Prisk
• [PATCHv4 1/9] arm: vt8500: Add device tree files for VIA/Wondermedia SoC's   Tony Prisk
• [PATCHv4 2/9] rtc: vt8500: Add devicetree support for vt8500-rtc   Tony Prisk
• [PATCHv4 3/9] serial: vt8500: Add devicetree support for vt8500-serial   Tony Prisk
• [PATCHv4 4/9] usb: vt8500: Add devicetree support for vt8500-ehci and -uhci.   Tony Prisk
• [PATCHv4 5/9] video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb   Tony Prisk
• [PATCHv4 6/9] arm: vt8500: Update arch-vt8500 to devicetree support.   Tony Prisk
• [PATCHv4 7/9] arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices   Tony Prisk
• [PATCHv4 8/9] arm: vt8500: gpio: Devicetree support for arch-vt8500   Tony Prisk
• [PATCHv4 9/9] arm: vt8500: clk: Add Common Clock Framework support   Tony Prisk
• [PATCH v3 5/9] ARM/ASoC: omap-mcbsp: Remove CLKR/FSR mux configuration code   Peter Ujfalusi
• [PATCH] ARM: EXYNOS: Add MFC device tree support   Kukjin Kim
• [PATCH 0/6] ARM/dts: omap McBSP and audio support for BeagleBoard   Peter Ujfalusi
• [PATCH 1/6] ARM/dts: OMAP2: Add McBSP entries for OMAP2420 and OMAP2430 SoC   Peter Ujfalusi
• [PATCH 2/6] ARM/dts: omap2420-h4: Include omap2420.dtsi file instead the common omap2   Peter Ujfalusi
• [PATCH 3/6] ARM/dts: OMAP3: Add McBSP entries   Peter Ujfalusi
• [PATCH 4/6] ARM/dts: OMAP4: Add McBSP entries   Peter Ujfalusi
• [PATCH 5/6] ARM/dts: OMAP5: Add McBSP entries   Peter Ujfalusi
• [PATCH 6/6] ARM/dts: omap3-beagle: Enable audio support   Peter Ujfalusi
• [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***   Arnd Bergmann
• [PATCHv4 3/9] serial: vt8500: Add devicetree support for vt8500-serial   Alan Cox
• [PATCH 1/7] mfd: add imx syscon driver based on regmap   Mark Brown
• [PATCH v3 0/4] pinctrl: add support for samsung pinctrl driver   Thomas Abraham
• [PATCH v3 1/4] pinctrl: add samsung pinctrl and gpiolib driver   Thomas Abraham
• [PATCH v3 2/4] pinctrl: add exynos4210 specific extensions for samsung pinctrl driver   Thomas Abraham
• [PATCH v3 3/4] gpio: exynos4: skip gpiolib registration if pinctrl driver is used   Thomas Abraham
• [PATCH v3 4/4] ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used   Thomas Abraham
• [PATCH 4/7] regulator: anatop-regulator: convert to use imx-syscon to access anatop register   Mark Brown
• [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***   Tony Prisk
• [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***   Arnd Bergmann
• [rtc-linux] [PATCHv4 8/9] arm: vt8500: gpio: Devicetree support for arch-vt8500   Linus Walleij
• [rtc-linux] RE: [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***   Linus Walleij
• [PATCH V4] mtd: m25p80: Make fast read configurable via DT   Marek Vasut
• [PATCH] ARM: dts: imx: add imx5x usb entries   Shawn Guo
• [PATCH v6] ARM: mtd: nand: davinci: add OF support for davinci nand controller   Artem Bityutskiy
• [PATCH v5] mmc: sdhci-s3c: Add device tree support   Thomas Abraham
• [PATCH 05/14] ARM: at91: add pinctrl support   Stephen Warren
• [PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core   Stephen Warren
• [PATCH 4/7] regulator: anatop-regulator: convert to use imx-syscon to access anatop register   Stephen Warren
• RFC: New release for DTC?   Yann E. MORIN
• [PATCH] [v2] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped device   Timur Tabi
• [PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core   Stephen Warren
• [PATCHv3 3/9] serial: vt8500: Add devicetree support for   Rob Landley
• [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***   Tony Prisk
• [PATCH] [v2] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped device   Stephen Warren
• [PATCH v3 1/4] pinctrl: add samsung pinctrl and gpiolib driver   Stephen Warren
• [RFC] How should the device tree represent multiple Ethernet PHYs in a single package?   David Daney
• [PATCH] [v2] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped device   Tabi Timur-B04825
• RFC: New release for DTC?   David Gibson
• [PATCH 1/7] mfd: add imx syscon driver based on regmap   Dong Aisheng
• [PATCH 4/7] regulator: anatop-regulator: convert to use imx-syscon to access anatop register   Dong Aisheng
• [PATCH 1/1] clk: add DT support for clock gating control   Mike Turquette
• [PATCH 4/7] regulator: anatop-regulator: convert to use imx-syscon to access anatop register   Dong Aisheng
• [PATCH] [v2] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped device   Stephen Warren
• [PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core   Stephen Warren
• [PATCH v5] mmc: sdhci-s3c: Add device tree support   Thomas Abraham
• [PATCH v3 1/4] pinctrl: add samsung pinctrl and gpiolib driver   Thomas Abraham
• [PATCH 1/1] clk: add DT support for clock gating control   Tony Prisk
• [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***   Arnd Bergmann
• [PATCH] mmc: dt: Add card-detection properties to core binding.   Shawn Guo
• [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***   Tony Prisk
• [PATCH 1/7] mfd: add imx syscon driver based on regmap   Shawn Guo
• [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***   Tony Prisk
• [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***   Tony Prisk
• [PATCH v4 1/3] Runtime Interpreted Power Sequences   Alex Courbot
• [PATCH v4 1/3] Runtime Interpreted Power Sequences   Tomi Valkeinen
• [PATCH 3.6.0-rc3 1/2] of/mdio: Add dummy functions in of_mdio.h.   Srinivas KANDAGATLA
• [PATCH 3.6.0-rc3 2/2] of/mdio-gpio: Simplify the way device tree support is implemented.   Srinivas KANDAGATLA
• [PATCH v2] mtd: physmap_of: Add "no-unaligned-direct-access" DT property   Artem Bityutskiy
• [PATCH 1/2] powerpc/mpc5200: add dts files for ifm camera machines   Anatolij Gustschin
• [PATCH 2/2] dt/misc: add bindings documentation for ifm camera sensor interface   Anatolij Gustschin
• [RFC RESEND 2/4] ARM: OMAP3: Dynamically disable secure timer nodes for secure devices   Hiremath, Vaibhav
• [PATCH] [v2] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped device   Timur Tabi
• [PATCH] [v2] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped device   Stephen Warren
• [PATCH] [v2] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped device   Timur Tabi
• [PATCH] [v2] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped device   Scott Wood
• [PATCH] [v2] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped device   Stephen Warren
• [PATCH] [v2] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped device   David Miller
• [PATCH] [v3] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped device   Timur Tabi
• [PATCH] [v2] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped device   Scott Wood
• [PATCH] [v3] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped device   Stephen Warren
• [PATCH] [v3] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped device   Timur Tabi
• [PATCH] arm/dts: omap5: Add mmc controller nodes and board data   Tony Lindgren
• [PATCH] [v3] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped device   Stephen Warren
• [PATCH-V2] arm/dts: AM33XX: Set the default status of module to "disabled" state   Tony Lindgren
• [PATCH v3 3/4] arm/dts: AM33XX: Configure pinmuxs for D_CAN1 on AM335x-EVM   Tony Lindgren
• [PATCH 2/2] arm/dts: Cleanup regulator naming and remove @0,1..   Tony Lindgren
• [PATCH V4] mfd: add MAX8907 core driver   Stephen Warren
• [RFC v4] V4L DT bindings   Guennadi Liakhovetski
• [PATCH v2 1/2] mfd: dt: tps6586x: Add power off control   Bill Huang
• [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***   Stephen Warren
• [PATCH v2 1/2] mfd: dt: tps6586x: Add power off control   Stephen Warren
• [PATCH 01/11] pinctrl: mvebu: pinctrl driver core   Andrew Lunn
• [PATCH 05/14] ARM: at91: add pinctrl support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH REPOST] dtc: integrate gpp   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH V4] mtd: m25p80: Make fast read configurable via DT   Artem Bityutskiy
• [PATCH V4] mtd: m25p80: Make fast read configurable via DT   Marek Vasut
• [PATCH 2/3] usb: otg: add device tree support to otg library   Marc Kleine-Budde
• [PATCH V5] mtd: m25p80: Make fast read configurable via DT   Marek Vasut
• [PATCH V5] mtd: m25p80: Make fast read configurable via DT   Marek Vasut
• [PATCH] gpio: samsung: add devicetree init for s3c24xx arches   Heiko Stübner
• [PATCH REPOST] dtc: integrate gpp   Stephen Warren
• [PATCH] DT: export of_irq_to_resource_table()   John Crispin
• [PATCH V5] mtd: m25p80: Make fast read configurable via DT   Marek Vasut
• [PATCH v4 0/9] mmc: dw_mmc: add support for device tree based instantiation   Thomas Abraham
• [PATCH v4 1/9] mmc: dw_mmc: convert copy of struct device in struct dw_mci to a reference   Thomas Abraham
• [PATCH v4 2/9] mmc: dw_mmc: Use devm_* functions in dw_mmc platform driver   Thomas Abraham
• [PATCH v4 3/9] mmc: dw_mmc: allow probe to succeed even if one slot is initialized   Thomas Abraham
• [PATCH v4 4/9] mmc: dw_mmc: lookup for optional biu and ciu clocks   Thomas Abraham
• [PATCH v4 5/9] mmc: dw_mmc: add quirk to indicate missing write protect line   Thomas Abraham
• [PATCH v4 6/9] mmc: dw_mmc: add device tree support   Thomas Abraham
• [PATCH v4 7/9] mmc: dw_mmc: prepare functions in dw_mmc-pltfm for reuse   Thomas Abraham
• [PATCH v4 8/9] mmc: dw_mmc: add support for implementation specific callbacks   Thomas Abraham
• [PATCH v4 9/9] mmc: dw_mmc: add support for exynos specific implementation of dw-mshc   Thomas Abraham
• [PATCH REPOST] dtc: integrate gpp   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] gpio: samsung: add devicetree init for s3c24xx arches   Thomas Abraham
• [PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core   Stephen Warren
• [PATCH 2/3] usb: otg: add device tree support to otg library   ABRAHAM, KISHON VIJAY
• [PATCH v2 1/2] mfd: dt: tps6586x: Add power off control   Bill Huang
• [PATCH] DT: export of_irq_to_resource_table()   Rob Herring
• [PATCH v2 0/7] add syscon driver based on regmap for general registers access   Dong Aisheng
• [PATCH v2 1/7] mfd: add syscon driver based on regmap   Dong Aisheng
• [PATCH v2 2/7] ARM: imx6q: add iomuxc gpr support into syscon   Dong Aisheng
• [PATCH v2 3/7] ARM: imx6q: add anatop support into syscon   Dong Aisheng
• [PATCH v2 4/7] regulator: anatop-regulator: convert to use syscon to access anatop register   Dong Aisheng
• [PATCH v2 5/7] ARM: imx6q: convert to use syscon to access anatop registers   Dong Aisheng
• [PATCH v2 6/7] ARM: dts: imx6q: add simple-bus compatible string for anatop   Dong Aisheng
• [PATCH v2 7/7] mfd: anatop-mfd: remove anatop driver   Dong Aisheng
• [PATCH] gpio: samsung: add devicetree init for s3c24xx arches   Heiko Stübner
• [PATCH V3 2/2] video: drm: exynos: Add device tree support   Sascha Hauer
• [PATCH] gpio: samsung: add devicetree init for s3c24xx arches   Vasily Khoruzhick
• [PATCH] gpio: samsung: add devicetree init for s3c24xx arches   Heiko Stübner
• [PATCH V3 0/2] video: drm: Add Device tree support to DRM-FIMD   Leela Krishna Amudala
• [PATCH] gpio: samsung: add devicetree init for s3c24xx arches   Vasily Khoruzhick
• [PATCH] ARM: AM33XX: clock: Add dcan clock aliases for device-tree   Vaibhav Hiremath
• [PATCH] gpio: samsung: add devicetree init for s3c24xx arches   Heiko Stübner
• [PATCH 0/2] arm/dts: AM33XX: Add reg and interrupt property for all nodes   Vaibhav Hiremath
• [PATCH 1/2] arm/dts: AM33XX: Convert all hex numbers to lower-case   Vaibhav Hiremath
• [PATCH 2/2] arm/dts: AM33XX: Specify reg and interrupt property for all nodes   Vaibhav Hiremath
• [PATCH] ARM: AM33XX: clock: Add dcan clock aliases for device-tree   Paul Walmsley
• [PATCH] ARM: AM33XX: clock: Add dcan clock aliases for device-tree   Hiremath, Vaibhav
• [PATCH] ARM: AM33XX: clock: Add dcan clock aliases for device-tree   Paul Walmsley
• [PATCH] ARM: AM33XX: clock: Add dcan clock aliases for device-tree   Hiremath, Vaibhav
• [PATCH 03/11] pinctrl: mvebu: kirkwood pinctrl driver   Stephen Warren
• [PATCH v2 1/7] mfd: add syscon driver based on regmap   Shawn Guo
• [PATCH v2 4/7] regulator: anatop-regulator: convert to use syscon to access anatop register   Shawn Guo
• [PATCH v3 06/25] docs: Xen ARM DT bindings   Rob Herring
• [PATCH 05/14] ARM: at91: add pinctrl support   Linus Walleij
• [PATCH v2 1/7] mfd: add syscon driver based on regmap   Dong Aisheng
• [PATCH v2 4/7] regulator: anatop-regulator: convert to use syscon to access anatop register   Dong Aisheng
• [PATCH v2 5/7] ARM: imx6q: convert to use syscon to access anatop registers   Richard Zhao
• [PATCH] gpio: samsung: add devicetree init for s3c24xx arches   Thomas Abraham
• [PATCH v4 9/9] mmc: dw_mmc: add support for exynos specific implementation of dw-mshc   Thomas Abraham
• [PATCH v4 0/9] mmc: dw_mmc: add support for device tree based instantiation   Thomas Abraham
• [PATCH v4 9/9] mmc: dw_mmc: add support for exynos specific implementation of dw-mshc   Thomas Abraham
• [PATCH v4 9/9] mmc: dw_mmc: add support for exynos specific implementation of dw-mshc   Thomas Abraham
• [PATCH v4 9/9] mmc: dw_mmc: add support for exynos specific implementation of dw-mshc   Thomas Abraham
• [PATCH v2 5/7] ARM: imx6q: convert to use syscon to access anatop registers   Dong Aisheng
• [PATCH v3 3/4] arm/dts: AM33XX: Configure pinmuxs for D_CAN1 on AM335x-EVM   Vaibhav Hiremath
• [PATCH 2/2] arm/dts: Cleanup regulator naming and remove @0,1..   Rajendra Nayak
• [PATCH 05/14] ARM: at91: add pinctrl support   Richard Genoud
• [PATCH v4 9/9] mmc: dw_mmc: add support for exynos specific implementation of dw-mshc   Thomas Abraham
• [PATCH v4 0/3] Add device tree data for AM33XX devices   AnilKumar Ch
• [PATCH RESEND v4 1/3] arm/dts: AM33XX: Add basic pinctrl device tree data   AnilKumar Ch
• [PATCH RESEND v4 2/3] arm/dts: AM33XX: Configure pinmuxs for user leds control on Bone   AnilKumar Ch
• [PATCH v4 3/3] arm/dts: AM33XX: Add D_CAN device tree data   AnilKumar Ch
• [PATCH v3 0/7] add syscon driver based on regmap for general registers access   Dong Aisheng
• [PATCH v3 1/7] mfd: add syscon driver based on regmap   Dong Aisheng
• [PATCH v3 2/7] ARM: imx6q: add iomuxc gpr support into syscon   Dong Aisheng
• [PATCH v3 3/7] ARM: imx6q: add anatop support into syscon   Dong Aisheng
• [PATCH v3 4/7] regulator: anatop-regulator: convert to use syscon to access anatop register   Dong Aisheng
• [PATCH v3 5/7] ARM: imx6q: convert to use syscon to access anatop registers   Dong Aisheng
• [PATCH v3 6/7] ARM: dts: imx6q: add simple-bus compatible string for anatop   Dong Aisheng
• [PATCH v3 7/7] mfd: anatop-mfd: remove anatop driver   Dong Aisheng
• [PATCH v4 4/9] mmc: dw_mmc: lookup for optional biu and ciu clocks   Thomas Abraham
• [PATCH v4 9/9] mmc: dw_mmc: add support for exynos specific implementation of dw-mshc   Thomas Abraham
• [PATCH v2 02/14] MFD: twl4030-audio: Convert to use devm_kzalloc   Mark Brown
• [PATCH v2] gpio: samsung: add devicetree init for s3c24xx arches   Heiko Stübner
• [PATCH v3 1/7] mfd: add syscon driver based on regmap   Stephen Warren
• [PATCH v2] gpio: samsung: add devicetree init for s3c24xx arches   Kukjin Kim
• [PATCH v3 1/7] mfd: add syscon driver based on regmap   Dong Aisheng
• [PATCH] powerpc/8544ds: add partition table for norflash   Dongsheng.wang at freescale.com
• [PATCH v6 1/3] USB: chipidea: add imx usbmisc support   Richard Zhao
• [PATCH v2] gpio: samsung: add devicetree init for s3c24xx arches   Heiko Stübner
• [PATCH v6 1/3] USB: chipidea: add imx usbmisc support   Sascha Hauer
• [PATCH v6 1/3] USB: chipidea: add imx usbmisc support   Richard Zhao
• [RFC PATCH] ARM: OMAP2+: omap-device: Do not overwrite resources allocated by OF layer   Vaibhav Hiremath
• [PATCH v5 0/9] mmc: dw_mmc: add support for device tree based instantiation   Thomas Abraham
• [PATCH v5 1/9] mmc: dw_mmc: convert copy of struct device in struct dw_mci to a reference   Thomas Abraham
• [PATCH v5 2/9] mmc: dw_mmc: Use devm_* functions in dw_mmc platform driver   Thomas Abraham
• [PATCH v5 3/9] mmc: dw_mmc: allow probe to succeed even if one slot is initialized   Thomas Abraham
• [PATCH v5 4/9] mmc: dw_mmc: lookup for optional biu and ciu clocks   Thomas Abraham
• [PATCH v5 5/9] mmc: dw_mmc: add quirk to indicate missing write protect line   Thomas Abraham
• [PATCH v5 6/9] mmc: dw_mmc: add device tree support   Thomas Abraham
• [PATCH v5 7/9] mmc: dw_mmc: prepare functions in dw_mmc-pltfm for reuse   Thomas Abraham
• [PATCH v5 8/9] mmc: dw_mmc: add support for implementation specific callbacks   Thomas Abraham
• [PATCH v5 9/9] mmc: dw_mmc: add support for exynos specific implementation of dw-mshc   Thomas Abraham
• [PATCH v4 0/7] add syscon driver based on regmap for general registers access   Dong Aisheng
• [PATCH v4 1/7] mfd: add syscon driver based on regmap   Dong Aisheng
• [PATCH v4 2/7] ARM: imx6q: add iomuxc gpr support into syscon   Dong Aisheng
• [PATCH v4 3/7] ARM: imx6q: add anatop support into syscon   Dong Aisheng
• [PATCH v4 4/7] regulator: anatop-regulator: convert to use syscon to access anatop register   Dong Aisheng
• [PATCH v4 5/7] ARM: imx6q: convert to use syscon to access anatop registers   Dong Aisheng
• [PATCH v4 6/7] ARM: dts: imx6q: add simple-bus compatible string for anatop   Dong Aisheng
• [PATCH v4 7/7] mfd: anatop-mfd: remove anatop driver   Dong Aisheng
• [PATCH v6 1/3] USB: chipidea: add imx usbmisc support   Richard Zhao
• [PATCH v4 0/3] ARM: Exynos: Add support for MSHC controller   Thomas Abraham
• [PATCH v4 1/3] ARM: Samsung: Add support for MSHC controller clocks   Thomas Abraham
• [PATCH v4 2/3] ARM: Exynos5: Add AUXDATA support for MSHC controllers   Thomas Abraham
• [PATCH v4 3/3] ARM: dts: Add nodes for dw_mmc controllers for Samsung Exynos5250 platforms   Thomas Abraham
• [PATCH v6 1/3] USB: chipidea: add imx usbmisc support   Sascha Hauer
• [PATCH v2 0/8] ARM/dts: OMAP audio related updates for OMAP2/3/4/5   Peter Ujfalusi
• [PATCH v2 1/8] ARM/dts: OMAP2: Add McBSP entries for OMAP2420 and OMAP2430 SoC   Peter Ujfalusi
• [PATCH v2 2/8] ARM/dts: omap2420-h4: Include omap2420.dtsi file instead the common omap2   Peter Ujfalusi
• [PATCH v2 3/8] ARM/dts: OMAP3: Add McBSP entries   Peter Ujfalusi
• [PATCH v2 4/8] ARM/dts: OMAP4: Add McBSP entries   Peter Ujfalusi
• [PATCH v2 5/8] ARM/dts: OMAP5: Add McBSP entries   Peter Ujfalusi
• [PATCH v2 6/8] ARM/dts: omap3-beagle: Enable audio support   Peter Ujfalusi
• [PATCH v2 7/8] ARM/dts: omap4: Add reg-names for McPDM and DMIC   Peter Ujfalusi
• [PATCH v2 8/8] ARM/dts: omap5: Add McPDM and DMIC section to the dtsi file   Peter Ujfalusi
• Challenges of migrating to DT   Daniel Drake
• [PATCH v6 1/3] USB: chipidea: add imx usbmisc support   Marc Kleine-Budde
• Challenges of migrating to DT   David Gibson
• [PATCH v2 1/2] powerpc/mpc5200: add dts files for ifm camera machines   Anatolij Gustschin
• [PATCH v2 0/3] MFD/GPIO: Add twl6040 GPO driver   Peter Ujfalusi
• [PATCH v2 02/14] MFD: twl4030-audio: Convert to use devm_kzalloc   Peter Ujfalusi
• [PATCH v8 08/13] arm/dts: am33xx: Add dt data for usbss   Sergei Shtylyov
• [PATCH] of: adding devres version of of_iomap   Karicheri, Muralidharan
• [PATCH 3.6.0-rc3 1/2] of/mdio: Add dummy functions in of_mdio.h.   David Miller
• [PATCH 3.6.0-rc3 2/2] of/mdio-gpio: Simplify the way device tree support is implemented.   David Miller
• [PATCH] [v3] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped device   David Miller
• [PATCH] of: add devres version of of_iomap   Rob Herring
• [RFC RESEND 1/4] arm/dts: OMAP: Add timer nodes   Tony Lindgren
• [RFC v4] V4L DT bindings   Sylwester Nawrocki
• [PATCH RESEND v4 1/3] arm/dts: AM33XX: Add basic pinctrl device tree data   Tony Lindgren
• [PATCH RESEND v4 2/3] arm/dts: AM33XX: Configure pinmuxs for user leds control on Bone   Tony Lindgren
• [PATCH v4 3/3] arm/dts: AM33XX: Add D_CAN device tree data   Tony Lindgren
• [PATCH 2/2] arm/dts: Cleanup regulator naming and remove @0,1..   Tony Lindgren
• V4L DT @ plumbers (was Re: [RFC v4] V4L DT bindings)   Guennadi Liakhovetski
• [PATCH 0/6] Integrator devicetree support   Nicolas Pitre
• [PATCH 1/2] ARM: split out ATAGS parsing   Nicolas Pitre
• [PATCH 2/2] ARM: allow for ATAGS to be configured out when DT support is selected   Nicolas Pitre
• [PATCH] of: add devres version of of_iomap   Karicheri, Muralidharan
• V4L DT @ plumbers (was Re: [RFC v4] V4L DT bindings)   Laurent Pinchart
• V4L DT @ plumbers (was Re: [RFC v4] V4L DT bindings)   Guennadi Liakhovetski
• [PATCH 5/6] ARM: integrator: convert AMBA devices to device tree   Linus Walleij
• [PATCH v4 1/7] mfd: add syscon driver based on regmap   Shawn Guo
• [PATCH v4 7/7] mfd: anatop-mfd: remove anatop driver   Shawn Guo
• [PATCH v4 2/7] ARM: imx6q: add iomuxc gpr support into syscon   Shawn Guo
• [PATCH] of: add devres version of of_iomap   Rob Herring
• [PATCH v5 4/9] mmc: dw_mmc: lookup for optional biu and ciu clocks   Thomas Abraham
• [PATCH RESEND v4 1/3] arm/dts: AM33XX: Add basic pinctrl device tree data   Vaibhav Hiremath
• [PATCH v5 4/9] mmc: dw_mmc: lookup for optional biu and ciu clocks   Thomas Abraham
• [PATCH v5 4/9] mmc: dw_mmc: lookup for optional biu and ciu clocks   Thomas Abraham
• [PATCH v2 1/4] clk: add of_clk_src_onecell_get() support   Shawn Guo
• [PATCH v3 0/3] Add a generic cpufreq-cpu0 driver   Shawn Guo
• [PATCH 1/2] ARM: dts: Use active low flag for gpio-keys on Origen   Thomas Abraham
• [PATCH v5 4/9] mmc: dw_mmc: lookup for optional biu and ciu clocks   Thomas Abraham
• [PATCH 0/8] i2c: at91: cleanup and dt support   ludovic.desroches at atmel.com
• [PATCH 1/8] i2c: at91: use managed resources   ludovic.desroches at atmel.com
• [PATCH 2/8] i2c: at91: add warning about transmission issues for some devices   ludovic.desroches at atmel.com
• [PATCH 3/8] i2c: at91: use an id table for SoC dependent parameters   ludovic.desroches at atmel.com
• [PATCH 4/8] ARM: at91: do not configure at91sam9g10 twi pio as open-drain   ludovic.desroches at atmel.com
• [PATCH 4/8] ARM: at91: do not configure at91sam9g10 twi pio as open-drain   ludovic.desroches at atmel.com
• [PATCH 5/8] i2c: at91: add dt support to i2c-at91   ludovic.desroches at atmel.com
• [PATCH 6/8] ARM: at91: add clocks for I2C DT entries   ludovic.desroches at atmel.com
• [PATCH 7/8] ARM: dts: add twi nodes for atmel SOCs   ludovic.desroches at atmel.com
• [PATCH 8/8] ARM: dts: add twi nodes for atmel boards   ludovic.desroches at atmel.com
• [PATCH v5 0/5] Add device tree data for AM33XX devices   AnilKumar Ch
• [PATCH v5 1/5] arm/dts: AM33XX: Add basic pinctrl device tree data   AnilKumar Ch
• [PATCH v5 2/5] arm/dts: AM33XX: Configure pinmuxs for user leds control on Bone   AnilKumar Ch
• [PATCH v5 3/5] arm/dts: AM33XX: Add D_CAN device tree data   AnilKumar Ch
• [PATCH 4/5] leds: leds-gpio: adopt pinctrl support   AnilKumar Ch
• [PATCH 5/5] of: Modify c_can binding documentation   AnilKumar Ch
• [PATCHv3 0/4] Add device tree data for omap5   Benoit Cousson
• [PATCH 0/2] ARM: OMAP2: AM33XX: Add cpufreq support   AnilKumar Ch
• [PATCH 1/2] ARM: OMAP2+: AM33XX: Add clock entries to omap_clk data   AnilKumar Ch
• [PATCH 2/2] arm/dts: AM33XX: Add device tree OPP table   AnilKumar Ch
• [PATCH v8 08/13] arm/dts: am33xx: Add dt data for usbss   Felipe Balbi
• [PATCH v8 08/13] arm/dts: am33xx: Add dt data for usbss   ABRAHAM, KISHON VIJAY
• [PATCH v5 0/4] Runtime Interpreted Power Sequences   Alexandre Courbot
• [PATCH v5 1/4] Runtime Interpreted Power Sequences   Alexandre Courbot
• [PATCH v5 2/4] pwm_backlight: use power sequences   Alexandre Courbot
• [PATCH v5 3/4] tegra: dt: add label to tegra20's PWM   Alexandre Courbot
• [PATCH v5 4/4] tegra: ventana: add pwm backlight DT nodes   Alexandre Courbot
• [PATCH v9 01/13] usb: musb: dsps: add phy control logic to glue   Felipe Balbi
• [PATCH v9 01/13] usb: musb: dsps: add phy control logic to glue   Felipe Balbi
• [PATCH v9 01/13] usb: musb: dsps: add phy control logic to glue   ABRAHAM, KISHON VIJAY

Last message date: Fri Aug 31 23:21:04 EST 2012
Archived on: Sat Sep 1 05:42:58 EST 2012

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...