[PATCH v3 1/2] lis3: add generic DT matching code

Rob Herring robherring2 at gmail.com
Mon Aug 6 14:52:52 EST 2012


On 08/05/2012 11:18 AM, Daniel Mack wrote:
> Ping, anyone?
> 
> On 30.07.2012 09:36, Daniel Mack wrote:
>> This patch adds logic to parse lis3 properties from a device tree node
>> and store them in a freshly allocated lis3lv02d_platform_data.
>>
>> Note that the actual match tables are left out here. This part should
>> happen in the drivers that bind to the individual busses (SPI/I2C/PCI).
>>
>> Also adds some DT bindinds documentation.
>>
>> Signed-off-by: Daniel Mack <zonque at gmail.com>
>> ---
>> Changes from v2:
>>  - kzalloc braino
>>
>> Changes from v1:
>>  - some typos in properties fixed
>>
>>
>>  Documentation/devicetree/bindings/misc/lis302.txt |  74 ++++++++++++
>>  drivers/misc/lis3lv02d/lis3lv02d.c                | 137 ++++++++++++++++++++++
>>  drivers/misc/lis3lv02d/lis3lv02d.h                |   4 +
>>  3 files changed, 215 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/misc/lis302.txt
>>
>> diff --git a/Documentation/devicetree/bindings/misc/lis302.txt b/Documentation/devicetree/bindings/misc/lis302.txt
>> new file mode 100644
>> index 0000000..66230fd
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/misc/lis302.txt
>> @@ -0,0 +1,74 @@
>> +LIS302 accelerometer devicetree bindings
>> +
>> +This device is matched via its bus drivers, and has a number of properties
>> +that apply in on the generic device (independent from the bus).
>> +
>> +
>> +Required properties for the SPI bindings:
>> + - compatible: 		should be set to "st,lis3lv02d_spi"
>> + - reg:			the chipselect index
>> + - spi-max-frequency:	maximal bus speed, should be set to 1000000 unless
>> +			constrained by external circuitry
>> + - interrupts:		the interrupt generated by the device
>> +
>> +
>> +Optional properties for all bus drivers:
>> +
>> + - st,click-single-{x,y,z}:	if present, tells the device to issue an
>> +				interrupt on single click events on the
>> +				x/y/z axis.
>> + - st,click-double-{x,y,z}:	if present, tells the device to issue an
>> +				interrupt on double click events on the
>> +				x/y/z axis.
>> + - st,click-thresh-{x,y,z}:	set the x/y/z axis threshold
>> + - st,click-click-time-limit:	click time limit, from 0 to 127.5msec
>> +				with step of 0.5 msec
>> + - st,click-latency:		click latency, from 0 to 255 msec with
>> +				step of 1 msec.
>> + - st,click-window:		click window, from 0 to 255 msec with
>> +				step of 1 msec.

These should append "-msec" to define what units they are in.

>> + - st,irq{1,2}-disable:		disable IRQ 1/2
>> + - st,irq{1,2}-ff-wu-1:		raise IRQ 1/2 on FF_WU_1 condition
>> + - st,irq{1,2}-ff-wu-2:		raise IRQ 1/2 on FF_WU_2 condition
>> + - st,irq{1,2}-data-ready:	raise IRQ 1/2 on data ready contition
>> + - st,irq{1,2}-click:		raise IRQ 1/2 on click condition
>> + - st,irq-open-drain:		consider IRQ lines open-drain
>> + - st,irq-active-low:		make IRQ lines active low
>> + - st,wu-duration-1:		duration register for Free-Fall/Wake-Up
>> +				interrupt 1
>> + - st,wu-duration-2:		duration register for Free-Fall/Wake-Up
>> +				interrupt 2
>> + - st,wakeup-{x,y,z}-{lo,hi}:	set wakeup condition on x/y/z axis for
>> +				upper/lower limit
>> + - st,highpass-cutoff-hz=:	1, 2, 4 or 8 for 1Hz, 2Hz, 4Hz or 8Hz of
>> +				highpass cut-off frequency
>> + - st,hipass{1,2}-disable:	disable highpass 1/2.
>> + - st,default-rate=:		set the default rate
>> + - st,axis-{x,y,z}=:		set the axis to map to the three coordinates

Wow, that's a lot of properties...

>> +
>> +
>> +Example for a SPI device node:
>> +
>> +	lis302 at 0 {
>> +		compatible = "st,lis302dl-spi";
>> +		reg = <0>;
>> +		spi-max-frequency = <1000000>;
>> +		interrupt-parent = <&gpio>;
>> +		interrupts = <104 0>;
>> +
>> +		st,click-single-x;
>> +		st,click-single-y;
>> +		st,click-single-z;
>> +		st,click-thresh-x = <10>;
>> +		st,click-thresh-y = <10>;
>> +		st,click-thresh-z = <10>;
>> +		st,irq1-click;
>> +		st,irq2-click;
>> +		st,wakeup-x-lo;
>> +		st,wakeup-x-hi;
>> +		st,wakeup-y-lo;
>> +		st,wakeup-y-hi;
>> +		st,wakeup-z-lo;
>> +		st,wakeup-z-hi;
>> +	};
>> +
>> diff --git a/drivers/misc/lis3lv02d/lis3lv02d.c b/drivers/misc/lis3lv02d/lis3lv02d.c
>> index a981e2a..1411fdc 100644
>> --- a/drivers/misc/lis3lv02d/lis3lv02d.c
>> +++ b/drivers/misc/lis3lv02d/lis3lv02d.c
>> @@ -39,6 +39,7 @@
>>  #include <linux/miscdevice.h>
>>  #include <linux/pm_runtime.h>
>>  #include <linux/atomic.h>
>> +#include <linux/of_device.h>
>>  #include "lis3lv02d.h"
>>  
>>  #define DRIVER_NAME     "lis3lv02d"
>> @@ -912,6 +913,138 @@ static void lis3lv02d_8b_configure(struct lis3lv02d *lis3,
>>  	}
>>  }
>>  
>> +#ifdef CONFIG_OF
>> +static int lis3lv02d_init_dt(struct lis3lv02d *lis3)
>> +{
>> +	struct lis3lv02d_platform_data *pdata;
>> +	struct device_node *np = lis3->of_node;
>> +	u32 tmp;
>> +
>> +	if (!lis3->of_node)
>> +		return 0;
>> +
>> +	pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
>> +	if (!pdata)
>> +		return -ENOMEM;
>> +
>> +	if (of_get_property(np, "st,click-single-x", NULL))
>> +		pdata->click_flags |= LIS3_CLICK_SINGLE_X;
>> +	if (of_get_property(np, "st,click-double-x", NULL))
>> +		pdata->click_flags |= LIS3_CLICK_DOUBLE_X;
>> +
>> +	if (of_get_property(np, "st,click-single-y", NULL))
>> +		pdata->click_flags |= LIS3_CLICK_SINGLE_Y;
>> +	if (of_get_property(np, "st,click-double-y", NULL))
>> +		pdata->click_flags |= LIS3_CLICK_DOUBLE_Y;
>> +
>> +	if (of_get_property(np, "st,click-single-z", NULL))
>> +		pdata->click_flags |= LIS3_CLICK_SINGLE_Z;
>> +	if (of_get_property(np, "st,click-double-z", NULL))
>> +		pdata->click_flags |= LIS3_CLICK_DOUBLE_Z;
>> +
>> +	if (!of_property_read_u32(np, "st,click-threshold-x", &tmp))
>> +		pdata->click_thresh_x = tmp;
>> +	if (!of_property_read_u32(np, "st,click-threshold-y", &tmp))
>> +		pdata->click_thresh_y = tmp;
>> +	if (!of_property_read_u32(np, "st,click-threshold-z", &tmp))
>> +		pdata->click_thresh_z = tmp;
>> +
>> +	if (!of_property_read_u32(np, "st,click-time-limit", &tmp))
>> +		pdata->click_time_limit = tmp;

These can be just:

	of_property_read_u32(np, "st,click-time-limit", &pdata->click_time_limit);

The value is unchanged on error.

Rob

>> +	if (!of_property_read_u32(np, "st,click-latency", &tmp))
>> +		pdata->click_latency = tmp;
>> +	if (!of_property_read_u32(np, "st,click-window", &tmp))
>> +		pdata->click_window = tmp;
>> +
>> +	if (of_get_property(np, "st,irq1-disable", NULL))
>> +		pdata->irq_cfg |= LIS3_IRQ1_DISABLE;
>> +	if (of_get_property(np, "st,irq1-ff-wu-1", NULL))
>> +		pdata->irq_cfg |= LIS3_IRQ1_FF_WU_1;
>> +	if (of_get_property(np, "st,irq1-ff-wu-2", NULL))
>> +		pdata->irq_cfg |= LIS3_IRQ1_FF_WU_2;
>> +	if (of_get_property(np, "st,irq1-data-ready", NULL))
>> +		pdata->irq_cfg |= LIS3_IRQ1_DATA_READY;
>> +	if (of_get_property(np, "st,irq1-click", NULL))
>> +		pdata->irq_cfg |= LIS3_IRQ1_CLICK;
>> +
>> +	if (of_get_property(np, "st,irq2-disable", NULL))
>> +		pdata->irq_cfg |= LIS3_IRQ2_DISABLE;
>> +	if (of_get_property(np, "st,irq2-ff-wu-1", NULL))
>> +		pdata->irq_cfg |= LIS3_IRQ2_FF_WU_1;
>> +	if (of_get_property(np, "st,irq2-ff-wu-2", NULL))
>> +		pdata->irq_cfg |= LIS3_IRQ2_FF_WU_2;
>> +	if (of_get_property(np, "st,irq2-data-ready", NULL))
>> +		pdata->irq_cfg |= LIS3_IRQ2_DATA_READY;
>> +	if (of_get_property(np, "st,irq2-click", NULL))
>> +		pdata->irq_cfg |= LIS3_IRQ2_CLICK;
>> +
>> +	if (of_get_property(np, "st,irq-open-drain", NULL))
>> +		pdata->irq_cfg |= LIS3_IRQ_OPEN_DRAIN;
>> +	if (of_get_property(np, "st,irq-active-low", NULL))
>> +		pdata->irq_cfg |= LIS3_IRQ_ACTIVE_LOW;
>> +
>> +	if (!of_property_read_u32(np, "st,wu-duration-1", &tmp))
>> +		pdata->duration1 = tmp;
>> +	if (!of_property_read_u32(np, "st,wu-duration-2", &tmp))
>> +		pdata->duration2 = tmp;
>> +
>> +	if (of_get_property(np, "st,wakeup-x-lo", NULL))
>> +		pdata->wakeup_flags |= LIS3_WAKEUP_X_LO;
>> +	if (of_get_property(np, "st,wakeup-x-hi", NULL))
>> +		pdata->wakeup_flags |= LIS3_WAKEUP_X_HI;
>> +	if (of_get_property(np, "st,wakeup-y-lo", NULL))
>> +		pdata->wakeup_flags |= LIS3_WAKEUP_Y_LO;
>> +	if (of_get_property(np, "st,wakeup-y-hi", NULL))
>> +		pdata->wakeup_flags |= LIS3_WAKEUP_Y_HI;
>> +	if (of_get_property(np, "st,wakeup-z-lo", NULL))
>> +		pdata->wakeup_flags |= LIS3_WAKEUP_Z_LO;
>> +	if (of_get_property(np, "st,wakeup-z-hi", NULL))
>> +		pdata->wakeup_flags |= LIS3_WAKEUP_Z_HI;
>> +
>> +	if (!of_property_read_u32(np, "st,highpass-cutoff-hz", &tmp)) {
>> +		switch (tmp) {
>> +		case 1:
>> +			pdata->hipass_ctrl = LIS3_HIPASS_CUTFF_1HZ;
>> +			break;
>> +		case 2:
>> +			pdata->hipass_ctrl = LIS3_HIPASS_CUTFF_2HZ;
>> +			break;
>> +		case 4:
>> +			pdata->hipass_ctrl = LIS3_HIPASS_CUTFF_4HZ;
>> +			break;
>> +		case 8:
>> +			pdata->hipass_ctrl = LIS3_HIPASS_CUTFF_8HZ;
>> +			break;
>> +		}
>> +	}
>> +
>> +	if (of_get_property(np, "st,hipass1-disable", NULL))
>> +		pdata->hipass_ctrl |= LIS3_HIPASS1_DISABLE;
>> +	if (of_get_property(np, "st,hipass2-disable", NULL))
>> +		pdata->hipass_ctrl |= LIS3_HIPASS2_DISABLE;
>> +
>> +	if (of_get_property(np, "st,axis-x", NULL))
>> +		pdata->axis_x = tmp;
>> +	if (of_get_property(np, "st,axis-y", NULL))
>> +		pdata->axis_y = tmp;
>> +	if (of_get_property(np, "st,axis-z", NULL))
>> +		pdata->axis_z = tmp;
>> +
>> +	if (of_get_property(np, "st,default-rate", NULL))
>> +		pdata->default_rate = tmp;
>> +
>> +	lis3->pdata = pdata;
>> +
>> +	return 0;
>> +}
>> +
>> +#else
>> +static int lis3lv02d_init_dt(struct lis3lv02d *lis3)
>> +{
>> +	return 0;
>> +}
>> +#endif
>> +
>>  /*
>>   * Initialise the accelerometer and the various subsystems.
>>   * Should be rather independent of the bus system.
>> @@ -922,6 +1055,10 @@ int lis3lv02d_init_device(struct lis3lv02d *lis3)
>>  	irq_handler_t thread_fn;
>>  	int irq_flags = 0;
>>  
>> +	err = lis3lv02d_init_dt(lis3);
>> +	if (err < 0)
>> +		return err;
>> +
>>  	lis3->whoami = lis3lv02d_read_8(lis3, WHO_AM_I);
>>  
>>  	switch (lis3->whoami) {
>> diff --git a/drivers/misc/lis3lv02d/lis3lv02d.h b/drivers/misc/lis3lv02d/lis3lv02d.h
>> index 2b1482a..a296f1d 100644
>> --- a/drivers/misc/lis3lv02d/lis3lv02d.h
>> +++ b/drivers/misc/lis3lv02d/lis3lv02d.h
>> @@ -282,6 +282,10 @@ struct lis3lv02d {
>>  
>>  	struct lis3lv02d_platform_data *pdata;	/* for passing board config */
>>  	struct mutex		mutex;     /* Serialize poll and selftest */
>> +
>> +#ifdef CONFIG_OF
>> +	struct device_node	*of_node;
>> +#endif
>>  };
>>  
>>  int lis3lv02d_init_device(struct lis3lv02d *lis3);
>>
> 
> _______________________________________________
> devicetree-discuss mailing list
> devicetree-discuss at lists.ozlabs.org
> https://lists.ozlabs.org/listinfo/devicetree-discuss
> 



More information about the devicetree-discuss mailing list