[PATCH 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver
Mark Brown
broonie at opensource.wolfsonmicro.com
Tue Aug 21 22:41:46 EST 2012
On Tue, Aug 21, 2012 at 04:15:37PM +0530, Sourav Poddar wrote:
> +config MFD_SMSC
> + bool "Support for the SMSC ECE1099 series chips"
> + depends on I2C=y && MFD_CORE && REGMAP_I2C
This needs to select REGMAP_I2C not depend on it. REGMAP_I2C will only
be enabled by being selected.
> +int smsc_read(struct device *child, unsigned int reg,
> + unsigned int *dest)
> +{
> + struct smsc *smsc = dev_get_drvdata(child->parent);
> +
> + return regmap_read(smsc->regmap, reg, dest);
> +}
> +EXPORT_SYMBOL_GPL(smsc_read);
I'd suggest making these static inlines in the header given that they're
so trivial.
> +static struct regmap_config smsc_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .cache_type = REGCACHE_COMPRESSED,
> +};
Indentation is weird here. For the cache we should have at least
.max_register defined and given the functionality there must surely be
some volatile registers (I'm surprised this works at all as it is, the
cache should break things).
> + of_property_read_u32(node, "clock", &smsc->clk);
> +
This is all unconditional, there should be a dependency on this in
Kconfig.
> + regmap_read(smsc->regmap, SMSC_DEV_ID, &ret);
> + dev_dbg(&i2c->dev, "SMSC Device ID: %d\n", ret);
I'd make these log messages dev_info() or something.
> +err:
> + kfree(smsc);
Use devm_kzalloc() for this.
> +static const struct i2c_device_id smsc_i2c_id[] = {
> + { "smsc", 0},
> + {},
> +};
> +MODULE_DEVICE_TABLE(i2c, smsc_i2c_id);
This should probably list the part name rather than "smsc" - that seems
far too generic a name to use, obviously smsc produce more than one
part!
More information about the devicetree-discuss
mailing list