[PATCH v2 1/2] powerpc/mpic: Add Open-PIC global timer document

Dongsheng.wang at freescale.com Dongsheng.wang at freescale.com
Fri Aug 10 15:53:22 EST 2012


From: Wang Dongsheng <Dongsheng.Wang at freescale.com>

Add a description of the OPEN-PIC global timer in the OPEN-PIC document.

Moidfy mpic-timer document. 1.Add a TFRR register region. This register
is written by software to report the clocking frequency of the PIC timers.
2.Add a device_type. The global timer in line with the OPEN-PIC specification.

Signed-off-by: Wang Dongsheng <Dongsheng.Wang at freescale.com>
Signed-off-by: Li Yang <leoli at freescale.com>
---
 Documentation/devicetree/bindings/open-pic.txt     |   46 ++++++++++++++++++++
 .../devicetree/bindings/powerpc/fsl/mpic-timer.txt |   21 +++++----
 arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi    |    7 ++-
 arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi            |    7 ++-
 4 files changed, 66 insertions(+), 15 deletions(-)

diff --git a/Documentation/devicetree/bindings/open-pic.txt b/Documentation/devicetree/bindings/open-pic.txt
index 909a902..045c2e9 100644
--- a/Documentation/devicetree/bindings/open-pic.txt
+++ b/Documentation/devicetree/bindings/open-pic.txt
@@ -92,6 +92,52 @@ Example 2:
 
 * References
 
+* Open PIC global timers
+
+Required properties:
+- compatible: "open-pic,global-timer"
+
+- reg : Contains two regions.  The first is the timer frequency reporting
+  register for the group.  The second is the main timer register bank
+  (GTCCR, GTBCR, GTVPR, GTDR).
+
+- available-ranges: use <start count> style section to define which
+  timer interrupts can be used.  This property is optional; without this,
+  all timers within the group can be used.
+
+- interrupts: one interrupt per timer in the group, in order, starting
+  with timer zero.  If available-ranges is present, only the interrupts
+  that correspond to available timers shall be present.
+
+* Examples
+
+Example 1:
+
+	/* Note that this requires #interrupt-cells to be 4 */
+	timer: timer at 010f0 {
+		compatible = "open-pic,global-timer";
+		device_type = "open-pic";
+		reg = <0x010f0 4 0x01100 0x100>;
+
+		/* Another AMP partition is using timer */
+		available-ranges = <2 2>;
+
+		interrupts = <2 0 3 0
+		              3 0 3 0>;
+	};
+
+Example 2:
+
+	timer: timer at 010f0 {
+		compatible = "open-pic,global-timer";
+		device_type = "open-pic";
+		reg = <0x010f0 4 0x01100 0x100>;
+		interrupts = <0 0 3 0
+			      1 0 3 0
+			      2 0 3 0
+		              3 0 3 0>;
+	};
+
 [1] Power.org (TM) Standard for Embedded Power Architecture (TM) Platform
     Requirements (ePAPR), Version 1.0, July 2008.
     (http://www.power.org/resources/downloads/Power_ePAPR_APPROVED_v1.0.pdf)
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mpic-timer.txt b/Documentation/devicetree/bindings/powerpc/fsl/mpic-timer.txt
index df41958..5aafca0 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/mpic-timer.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/mpic-timer.txt
@@ -1,13 +1,14 @@
 * Freescale MPIC timers
 
 Required properties:
-- compatible: "fsl,mpic-global-timer"
+- compatible: "fsl,global-timer"
 
-- reg : Contains two regions.  The first is the main timer register bank
-  (GTCCRxx, GTBCRxx, GTVPRxx, GTDRxx).  The second is the timer control
+- reg : Contains three regions.  The first is the timer frequency reporting
+  register (TFRRx) for the group.  The second is the main timer register
+  bank (GTCCRxx, GTBCRxx, GTVPRxx, GTDRxx).  The third is the timer control
   register (TCRx) for the group.
 
-- fsl,available-ranges: use <start count> style section to define which
+- available-ranges: use <start count> style section to define which
   timer interrupts can be used.  This property is optional; without this,
   all timers within the group can be used.
 
@@ -18,19 +19,21 @@ Required properties:
 Example:
 	/* Note that this requires #interrupt-cells to be 4 */
 	timer0: timer at 41100 {
-		compatible = "fsl,mpic-global-timer";
-		reg = <0x41100 0x100 0x41300 4>;
+		compatible = "fsl,global-timer";
+		device_type = "open-pic";
+		reg = <0x410f0 4 0x41100 0x100 0x41300 4>;
 
 		/* Another AMP partition is using timers 0 and 1 */
-		fsl,available-ranges = <2 2>;
+		available-ranges = <2 2>;
 
 		interrupts = <2 0 3 0
 		              3 0 3 0>;
 	};
 
 	timer1: timer at 42100 {
-		compatible = "fsl,mpic-global-timer";
-		reg = <0x42100 0x100 0x42300 4>;
+		compatible = "fsl,global-timer";
+		device_type = "open-pic";
+		reg = <0x420f0 4 0x42100 0x100 0x42300 4>;
 		interrupts = <4 0 3 0
 		              5 0 3 0
 		              6 0 3 0
diff --git a/arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi b/arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi
index 8734cff..01cd33c 100644
--- a/arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi
+++ b/arch/powerpc/boot/dts/fsl/pq3-mpic-timer-B.dtsi
@@ -32,9 +32,10 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-timer at 42100 {
-	compatible = "fsl,mpic-global-timer";
-	reg = <0x42100 0x100 0x42300 4>;
+timer at 420f0 {
+	compatible = "fsl,global-timer";
+	device_type = "open-pic";
+	reg = <0x420f0 4 0x42100 0x100 0x42300 4>;
 	interrupts = <4 0 3 0
 		      5 0 3 0
 		      6 0 3 0
diff --git a/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi
index 71c30eb..c71d8e0 100644
--- a/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi
+++ b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi
@@ -44,9 +44,10 @@ mpic: pic at 40000 {
 	last-interrupt-source = <255>;
 };
 
-timer at 41100 {
-	compatible = "fsl,mpic-global-timer";
-	reg = <0x41100 0x100 0x41300 4>;
+timer at 410f0 {
+	compatible = "fsl,global-timer";
+	device_type = "open-pic";
+	reg = <0x410f0 4 0x41100 0x100 0x41300 4>;
 	interrupts = <0 0 3 0
 		      1 0 3 0
 		      2 0 3 0
-- 
1.7.5.1




More information about the devicetree-discuss mailing list