[PATCH v6 1/3] USB: chipidea: add imx usbmisc support

[Marc Kleine-Budde]

On 08/29/2012 01:01 PM, Sascha Hauer wrote:
> On Wed, Aug 29, 2012 at 01:18:10PM +0300, Alexander Shishkin wrote:
>> Sascha Hauer <s.hauer at pengutronix.de> writes:
>>
>>> On Wed, Aug 29, 2012 at 10:50:08AM +0300, Alexander Shishkin wrote:
>>>> Richard Zhao <richard.zhao at freescale.com> writes:
>>>>
>>>>> i.MX usb controllers shares non-core registers, which may include
>>>>> SoC specific controls. We take it as a usbmisc device and usbmisc
>>>>> driver set operations needed by ci13xxx_imx driver.
>>>>>
>>>>> For example, Sabrelite board has bad over-current design, we can
>>>>> usbmisc to disable over-current detect.
>>>>
>>>> Why does this have to be part of the usb driver instead of SoC specific
>>>> code? It looks like you've created a whole new device/driver
>>>> infrastructure just to disable overcurrent for a specific board.
>>>
>>> Richards code indeed only handles overcurrent for a specific board, but
>>> there are more bits to configure in the longer run: power pin
>>> polarities, ULPI/serial mode select and some more.

We already have a patch adding a usbmisc_imx53_init() function to that
driver.

>> Sounds to me like these things that should be taken care of by the phy
>> driver, which will likely be simpler from both driver's and devicetree's
>> perspective.
> 
> Most i.MX SoCs have three instances of the chipidea core. These cores
> share a single register space for controlling the mentioned bits (the
> usbmisc register space). The usbmisc looks different on the different
> SoCs.
> Indeed they control some phy specific aspects, but the phy itself may
> also be an external ULPI or UTMI phy with a separate driver. So if we
> integrate the usbmisc into the phy wouldn't that mean that it has to
> be integrated into all possible phy drivers?
> 
> From a devicetrees perspective it makes sense to integrate the flags
> into the chipidea nodes, because there is one node per chipidea core,
> but only one usbmisc unit for all ports on the SoC. So we can do a:
> 
> 	chipidea at ofs {
> 		disable-overcurrent = <1>;
> 	};
> 
> instead of
> 
> 	usbmisc at ofs {
> 		disable-overcurrent-port0 = <1>;
> 		disable-overcurrent-port1 = <0>;
> 		...
> 	};

+1

IMHO looks much cleaner.

>>>> And the infrastructure boils down to a complex way of passing a callback
>>>> from imx driver to another imx driver, that only works if they are
>>>> probed in the right order. I don't see any point in doing it like this
>>>> other than inflating the device tree tables even further.
>>>>
>>>> Why can't this be part of the SoC code like it is done, for example in
>>>> arch/arm/mach-omap2/control.c?
>>>
>>> The settings are board specific, so there must be some way to configure
>>> them in the devicetree.
>>
>> But I'm sure there's a way to control board-specific settings/kludges
>> from devicetree?
> 
> Hm, yes. That's what Richard does, right? I may be misunderstanding you
> here.
> 
> Sascha

Marc


-- 
Pengutronix e.K.                  | Marc Kleine-Budde           |
Industrial Linux Solutions        | Phone: +49-231-2826-924     |
Vertretung West/Dortmund          | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686  | http://www.pengutronix.de   |

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 259 bytes
Desc: OpenPGP digital signature
URL: <http://lists.ozlabs.org/pipermail/devicetree-discuss/attachments/20120829/a2f19d86/attachment.sig>