[PATCH 3/4] ARM: OMAP3: Switch to use the unified audio driver (omap-twl4030) for selected boards

Igor Grinberg grinberg at compulab.co.il
Wed Aug 8 22:24:36 EST 2012


Hi Peter,

Thank you very much for the patch series.
I probably will have some time to look into it more deeply on the next week.
Currently, only a small comment, please see below.

On 08/08/12 12:54, Peter Ujfalusi wrote:
> These boards have similar audio setup and they can all use the same driver
> for audio support if it is enabled in the kernel config.
> 
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi at ti.com>
> ---
>  arch/arm/mach-omap2/board-cm-t35.c      |    1 +
>  arch/arm/mach-omap2/board-devkit8000.c  |    1 +
>  arch/arm/mach-omap2/board-igep0020.c    |    1 +
>  arch/arm/mach-omap2/board-omap3beagle.c |    1 +
>  arch/arm/mach-omap2/board-omap3evm.c    |    1 +
>  arch/arm/mach-omap2/board-overo.c       |    1 +
>  6 files changed, 6 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
> index 97d7190..b73fa5c 100644
> --- a/arch/arm/mach-omap2/board-cm-t35.c
> +++ b/arch/arm/mach-omap2/board-cm-t35.c
> @@ -731,6 +731,7 @@ static void __init cm_t3x_common_init(void)
>  	cm_t35_init_ethernet();
>  	cm_t35_init_led();
>  	cm_t35_init_display();
> +	omap_twl4030_audio_init("overo", 26000000);

Can the card_name here be "cm-t3x" ?

[...]


-- 
Regards,
Igor.


More information about the devicetree-discuss mailing list