[PATCH v3 01/10] PCI: Keep pci_fixup_irqs() around after init

[Thierry Reding]

On Wed, Aug 15, 2012 at 01:42:39PM -0600, Bjorn Helgaas wrote:
> On Wed, Aug 15, 2012 at 1:28 PM, Thierry Reding
> <thierry.reding at avionic-design.de> wrote:
> > On Wed, Aug 15, 2012 at 10:06:27AM -0700, Bjorn Helgaas wrote:
> >> On Thu, Jul 26, 2012 at 12:55 PM, Thierry Reding
> >> <thierry.reding at avionic-design.de> wrote:
> >> > When using deferred driver probing, PCI host controller drivers may
> >> > actually require this function after the init stage.
> >> >
> >> > Signed-off-by: Thierry Reding <thierry.reding at avionic-design.de>
> >> > ---
> >> > Changes in v3:
> >> > - none
> >> >
> >> > Changes in v2:
> >> > - use __devinit annotations
> >>
> >> Your original patch removed __init completely.  Here you change it to
> >> __devinit.  That means we decide whether to discard the function based
> >> on whether CONFIG_HOTPLUG is supported.  But I think your point is not
> >> about hotplug; it's merely that we should be able to scan a PCI bus
> >> after init-time.  We ought to be able to do a late PCI scan even if
> >> hotplug is not supported.
> >>
> >> Therefore, I'd be inclined to remove __init completely unless you have
> >> another reason for preferring __devinit.
> >
> > I thought __devinit would resolve to nothing if HOTPLUG is defined and
> > __init otherwise. That seemed more appropriate. However you are right
> > that it is useful to always have it available, so I'm fine with removing
> > the annotations altogether. Do you want me to follow up with a patch? Or
> > can you just take the first version? I'm not sure if it still applies.
> 
> You're right about how __devinit works.  It's just that I don't think
> hotplug is actually relevant here.  We're trying to make
> pci_fixup_irqs() work after init, whether it's because of hotplug or
> simply because the arch scans host bridges after init.
> 
> I applied this to my "next" branch.  Thanks!

Great! Thanks. It's nice to see the patch series shrink. =)

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: not available
URL: <http://lists.ozlabs.org/pipermail/devicetree-discuss/attachments/20120815/b25725ed/attachment.sig>