[PATCHv7] arm/dts: omap4-sdp: Add keypad data
Benoit Cousson
b-cousson at ti.com
Tue Aug 14 19:20:51 EST 2012
Hi Sourav
On 08/14/2012 08:23 AM, Poddar, Sourav wrote:
> Hi,
>
> On Fri, Jul 20, 2012 at 4:08 PM, Sourav Poddar <sourav.poddar at ti.com> wrote:
>> Add keypad data node in omap4 device tree file.
>> Also fill the device tree binding parameters
>> with the required value in "omap4-sdp" dts file.
>>
>> Tested on omap4430 sdp with 3.5-rc6 kernel.
>>
>> Cc: Benoit Cousson <b-cousson at ti.com>
>> Cc: Rob Herring <rob.herring at calxeda.com>
>> Cc: Grant Likely <grant.likely at secretlab.ca>
>> Cc: Felipe Balbi <balbi at ti.com>
>> Signed-off-by: Sourav Poddar <sourav.poddar at ti.com>
>> ---
>> Changes since v6:
>> -remove address from the node since reg property
>> is not used.
>> arch/arm/boot/dts/omap4-sdp.dts | 70 +++++++++++++++++++++++++++++++++++++++
>> arch/arm/boot/dts/omap4.dtsi | 5 +++
>> 2 files changed, 75 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
>> index 72216e9..80cd016 100644
>> --- a/arch/arm/boot/dts/omap4-sdp.dts
>> +++ b/arch/arm/boot/dts/omap4-sdp.dts
>> @@ -113,6 +113,76 @@
>> "DMic", "Digital Mic",
>> "Digital Mic", "Digital Mic1 Bias";
>> };
>> +
>> + keypad {
>> + keypad,num-rows = <8>;
>> + keypad,num-columns = <8>;
>> + linux,keymap = < 0x00000012
>> + 0x00010013
>> + 0x00020014
>> + 0x00030066
>> + 0x0004003f
>> + 0x000500f0
>> + 0x00060017
>> + 0x0007002a
>> + 0x01000020
>> + 0x01010021
>> + 0x01020022
>> + 0x010300e7
>> + 0x01040040
>> + 0x010500f0
>> + 0x01060025
>> + 0x0107001c
>> + 0x0200002d
>> + 0x0201002e
>> + 0x0202002f
>> + 0x0203006b
>> + 0x02040041
>> + 0x020500f0
>> + 0x02060034
>> + 0x0207003a
>> + 0x0300002c
>> + 0x0301004e
>> + 0x03020030
>> + 0x0303003b
>> + 0x03040042
>> + 0x030500f0
>> + 0x03060018
>> + 0x03070039
>> + 0x04000011
>> + 0x04010015
>> + 0x04020016
>> + 0x0403003c
>> + 0x04040073
>> + 0x040500f0
>> + 0x04060026
>> + 0x04070069
>> + 0x0500001f
>> + 0x05010023
>> + 0x05020024
>> + 0x0503003d
>> + 0x05040043
>> + 0x05050072
>> + 0x05060032
>> + 0x0507006a
>> + 0x06000010
>> + 0x0601001e
>> + 0x06020031
>> + 0x0603009e
>> + 0x0604000e
>> + 0x060500f0
>> + 0x06060019
>> + 0x06070067
>> + 0x07000094
>> + 0x07010095
>> + 0x070200ca
>> + 0x070300cb
>> + 0x0704003e
>> + 0x070500f0
>> + 0x07060160
>> + 0x0707006c >;
I know that the hex value are faster to parse than the explicit
information, but maybe you could at least comment each entry?
Otherwise is looks fine to me.
Thanks,
Benoit
>> + linux,input-no-autorepeat;
>> + };
>> };
>>
>> &i2c1 {
>> diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
>> index 04cbbcb..e78a1f1 100644
>> --- a/arch/arm/boot/dts/omap4.dtsi
>> +++ b/arch/arm/boot/dts/omap4.dtsi
>> @@ -296,4 +296,9 @@
>> ti,hwmods = "dmic";
>> };
>> };
>> +
>> + keypad {
>> + compatible = "ti,omap4-keypad";
>> + ti,hwmods = "kbd";
>> + };
>> };
>> --
>> 1.7.1
>>
> Any more comments on this patch?
>
> ~Sourav
>
More information about the devicetree-discuss
mailing list