[PATCH v2 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg

Heiko Stübner heiko at sntech.de
Tue Aug 7 18:11:22 EST 2012


Am Dienstag, 7. August 2012, 09:28:40 schrieb Praveen Paneri:
> This driver uses usb_phy interface to interact with s3c-hsotg. Supports
> phy_init and phy_shutdown functions to enable/disable phy. Tested with
> smdk6410 and smdkv310. More SoCs can be brought under later.
>
> Signed-off-by: Praveen Paneri <p.paneri at samsung.com>
> ---
>  .../devicetree/bindings/usb/samsung-usbphy.txt     |    9 +
>  drivers/usb/phy/Kconfig                            |    8 +
>  drivers/usb/phy/Makefile                           |    1 +
>  drivers/usb/phy/samsung_usbphy.c                   |  355
> ++++++++++++++++++++ drivers/usb/phy/samsung_usbphy.h                   | 
>  48 +++
>  include/linux/platform_data/s3c-hsotg.h            |    5 +
>  6 files changed, 426 insertions(+), 0 deletions(-)
>  create mode 100644
> Documentation/devicetree/bindings/usb/samsung-usbphy.txt create mode
> 100644 drivers/usb/phy/samsung_usbphy.c
>  create mode 100644 drivers/usb/phy/samsung_usbphy.h
> 

[...]

> diff --git a/include/linux/platform_data/s3c-hsotg.h
> b/include/linux/platform_data/s3c-hsotg.h index 8b79e09..25ed31e 100644
> --- a/include/linux/platform_data/s3c-hsotg.h
> +++ b/include/linux/platform_data/s3c-hsotg.h
> @@ -35,6 +35,11 @@ struct s3c_hsotg_plat {
>  	int (*phy_exit)(struct platform_device *pdev, int type);
>  };
> 
> +struct s3c_usbphy_plat {
> +	void (*pmu_isolation)(int on);
> +};
> +
>  extern void s3c_hsotg_set_platdata(struct s3c_hsotg_plat *pd);
> +extern void s3c_usbphy_set_platdata(struct s3c_usbphy_plat *pd);
> 
>  #endif /* __LINUX_USB_S3C_HSOTG_H */

hmm, I'm not completely sure about this being in the s3c-hsotg header, as on 
s3c2443/2416/2450 it's the s3c-hsudc that will be (hopefully) using the phy in 
the future.


Heiko


More information about the devicetree-discuss mailing list