[PATCH] mmc: dt: Add card-detection properties to core binding.
Chris Ball
cjb at laptop.org
Thu Aug 23 04:05:35 EST 2012
Signed-off-by: Chris Ball <cjb at laptop.org>
---
Documentation/devicetree/bindings/mmc/mmc.txt | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt
index 8a6811f..8e2e0ba 100644
--- a/Documentation/devicetree/bindings/mmc/mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc.txt
@@ -9,12 +9,17 @@ Interpreted by the OF core:
Required properties:
- bus-width: Number of data lines, can be <1>, <4>, or <8>
+Card detection:
+If no property below is supplied, standard SDHCI card detect is used.
+Only one of the properties in this section should be supplied:
+ - broken-cd: There is no card detection available; polling must be used.
+ - cd-gpios: Specify GPIOs for card detection, see gpio binding
+ - non-removable: non-removable slot (like eMMC); assume always present.
+
Optional properties:
-- cd-gpios: Specify GPIOs for card detection, see gpio binding
- wp-gpios: Specify GPIOs for write protection, see gpio binding
- cd-inverted: when present, polarity on the cd gpio line is inverted
- wp-inverted: when present, polarity on the wp gpio line is inverted
-- non-removable: non-removable slot (like eMMC)
- max-frequency: maximum operating clock frequency
Example:
--
Chris Ball <cjb at laptop.org> <http://printf.net/>
One Laptop Per Child
More information about the devicetree-discuss
mailing list