[PATCH v9 01/13] usb: musb: dsps: add phy control logic to glue

[Felipe Balbi]

On Fri, Aug 31, 2012 at 06:51:04PM +0530, ABRAHAM, KISHON VIJAY wrote:
> Hi,
> 
> On Fri, Aug 31, 2012 at 5:53 PM, Felipe Balbi <balbi at ti.com> wrote:
> > Hi,
> >
> > On Fri, Aug 31, 2012 at 04:39:47PM +0530, Ravi Babu wrote:
> >> From: Santhapuri, Damodar <damodar.santhapuri at ti.com>
> >>
> >> AM335x uses NOP transceiver driver and need to enable builtin PHY
> >> by writing into usb_ctrl register available in system control
> >> module register space. This is being added at musb glue driver
> >> layer untill a separate system control module driver is available.
> >>
> >> Signed-off-by: Ajay Kumar Gupta <ajay.gupta at ti.com>
> >> Signed-off-by: Santhapuri, Damodar <damodar.santhapuri at ti.com>
> >> Signed-off-by: Ravi Babu <ravibabu at ti.com>
> >
> > Kishon, you were adding a real phy driver for OMAP's internal phy logic
> > on one of your patches and I believe this will conflict with your
> > changes, right ?
> 
> Indeed. My final patch of that series removes some of the functions
> from omap_phy_internal.c (which was taken care in the phy driver).
> >
> > How does this look to you ? Is this at least correct ? I suppose the
> > correct way would be to actually have the system control module driver
> > which we have been waiting, right ?
> 
> Correct. I think once we have the system control module driver in
> place, we'll have everything wrt control module register writes
> implemented in correct way.

So $SUBJECT will pretty much be thrown away once we have SCM driver, in
that case it's best to wait a bit longer and apply this series once SCM
driver is available and after your series too... you agree ?

-- 
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.ozlabs.org/pipermail/devicetree-discuss/attachments/20120831/8034b28f/attachment-0001.sig>