[PATCH v3 00/10] ARM: tegra: Add PCIe device tree support

[Thierry Reding]

On Wed, Aug 15, 2012 at 01:04:20PM -0600, Stephen Warren wrote:
> On 08/14/2012 05:51 PM, Stephen Warren wrote:
> > On 08/14/2012 04:58 PM, Stephen Warren wrote:
> ...
> >> Can't we make the call to pci_bus_add_devices() optional in
> >> pci_scan_root_bus() somehow; one of:
> > 
> > Sigh, that turns out not to work correctly; it solves at least this part
> > of the problem when booting using device tree, but when booting using a
> > board file, it causes the IRQ number passed to the PCIe device to be
> > bogus:-(
> > 
> > I give up for now.
> 
> I think the appropriate workaround for Tegra in 3.6 is to simply make
> any drivers for PCIe-based devices be modules instead of built-in, as
> Thierry hinted at much earlier in the thread. I've validated that the
> Ethernet works just fine on TrimSlice with that change, booting v3.6-rc1
> using either board files or device tree.

That's certainly the easiest and least error-prone solution.

> For 3.7, we should continue the discussion about a real fix; I'll look
> into the change Bjorn requested and see if it works, although given that
> hacking pci_scan_root_bus as described immediately previously in this
> thread caused a regression when booting using a board file, and the fact
> that board files are no longer supported on Tegra, I'm not too confident
> in the outcome...

I don't understand this last part. If the problem is there when booting
from board files and the board files are removed, doesn't that remove
the problem as well? =)

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: not available
URL: <http://lists.ozlabs.org/pipermail/devicetree-discuss/attachments/20120815/7bce318a/attachment.sig>