August 2012 Archives by author
Starting: Wed Aug 1 00:11:25 EST 2012
Ending: Fri Aug 31 23:21:04 EST 2012
Messages: 1175
- [PATCH v2 1/2] drivers: bus: add a new driver for omap-ocp2scp
ABRAHAM, KISHON VIJAY
- [PATCH v6 01/11] drivers: usb: otg: add a new driver for omap usb2 phy
ABRAHAM, KISHON VIJAY
- [PATCH v6 03/11] drivers: usb: otg: make twl6030_usb as a comparator driver to omap_usb2
ABRAHAM, KISHON VIJAY
- [PATCH v6 04/11] arm: omap: hwmod: add a new addr space in otg for writing to control module
ABRAHAM, KISHON VIJAY
- [PATCH v6 05/11] drivers: usb: twl6030: Add dt support for twl6030 usb
ABRAHAM, KISHON VIJAY
- [PATCH v6 07/11] drivers: usb: twl4030: Add device tree support for twl4030 usb
ABRAHAM, KISHON VIJAY
- [PATCH v6 11/11] arm: omap: phy: remove unused functions from omap-phy-internal.c
ABRAHAM, KISHON VIJAY
- [PATCH v6 09/11] drivers: usb: musb: Add device tree support for omap musb glue
ABRAHAM, KISHON VIJAY
- [PATCH v6 00/11] omap: musb: Add device tree support
ABRAHAM, KISHON VIJAY
- [PATCH v6 01/11] drivers: usb: otg: add a new driver for omap usb2 phy
ABRAHAM, KISHON VIJAY
- [PATCH v4 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
ABRAHAM, KISHON VIJAY
- [RESEND PATCH v4 0/2] omap: add ocp2scp as a bus driver
ABRAHAM, KISHON VIJAY
- [PATCH 2/3] usb: otg: add device tree support to otg library
ABRAHAM, KISHON VIJAY
- [PATCH v8 08/13] arm/dts: am33xx: Add dt data for usbss
ABRAHAM, KISHON VIJAY
- [PATCH v9 01/13] usb: musb: dsps: add phy control logic to glue
ABRAHAM, KISHON VIJAY
- [PATCH v3 2/2] ARM: EXYNOS: Add Gscaler device from DT
Thomas Abraham
- [PATCH] ARM: EXYNOS: Add MFC device tree support
Thomas Abraham
- [PATCH] mmc: sdhci-s3c: Add device tree support
Thomas Abraham
- [PATCH] mmc: sdhci-s3c: Add device tree support
Thomas Abraham
- [PATCH] mmc: sdhci-s3c: Add device tree support
Thomas Abraham
- [PATCH] mmc: sdhci-s3c: Add device tree support
Thomas Abraham
- [PATCH] ARM: dts: use generic mmc properties for Samsung Exynos4210 sdhci nodes
Thomas Abraham
- [PATCH] mmc: sdhci-s3c: Add device tree support
Thomas Abraham
- [PATCH] mmc: dt: Add 'broken-cd' DT binding
Thomas Abraham
- [PATCH] mmc: dt: Add 'broken-cd' DT binding
Thomas Abraham
- [PATCH] mmc: dt: Add 'broken-cd' DT binding
Thomas Abraham
- [PATCH] mmc: dt: Add 'broken-cd' DT binding
Thomas Abraham
- [PATCH] mmc: dt: Add 'broken-cd' DT binding
Thomas Abraham
- [PATCH] mmc: dt: Add 'broken-cd' DT binding
Thomas Abraham
- [PATCH] mmc: dt: Add 'broken-cd' DT binding
Thomas Abraham
- [PATCH] mmc: dt: Add 'broken-cd' DT binding
Thomas Abraham
- [PATCH] mmc: dt: Add 'broken-cd' DT binding
Thomas Abraham
- [PATCH] mmc: dt: Add 'broken-cd' DT binding
Thomas Abraham
- [PATCH v3 0/4] pinctrl: add support for samsung pinctrl driver
Thomas Abraham
- [PATCH v3 1/4] pinctrl: add samsung pinctrl and gpiolib driver
Thomas Abraham
- [PATCH v3 2/4] pinctrl: add exynos4210 specific extensions for samsung pinctrl driver
Thomas Abraham
- [PATCH v3 3/4] gpio: exynos4: skip gpiolib registration if pinctrl driver is used
Thomas Abraham
- [PATCH v3 4/4] ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used
Thomas Abraham
- [PATCH v5] mmc: sdhci-s3c: Add device tree support
Thomas Abraham
- [PATCH v5] mmc: sdhci-s3c: Add device tree support
Thomas Abraham
- [PATCH v3 1/4] pinctrl: add samsung pinctrl and gpiolib driver
Thomas Abraham
- [PATCH v4 0/9] mmc: dw_mmc: add support for device tree based instantiation
Thomas Abraham
- [PATCH v4 1/9] mmc: dw_mmc: convert copy of struct device in struct dw_mci to a reference
Thomas Abraham
- [PATCH v4 2/9] mmc: dw_mmc: Use devm_* functions in dw_mmc platform driver
Thomas Abraham
- [PATCH v4 3/9] mmc: dw_mmc: allow probe to succeed even if one slot is initialized
Thomas Abraham
- [PATCH v4 4/9] mmc: dw_mmc: lookup for optional biu and ciu clocks
Thomas Abraham
- [PATCH v4 5/9] mmc: dw_mmc: add quirk to indicate missing write protect line
Thomas Abraham
- [PATCH v4 6/9] mmc: dw_mmc: add device tree support
Thomas Abraham
- [PATCH v4 7/9] mmc: dw_mmc: prepare functions in dw_mmc-pltfm for reuse
Thomas Abraham
- [PATCH v4 8/9] mmc: dw_mmc: add support for implementation specific callbacks
Thomas Abraham
- [PATCH v4 9/9] mmc: dw_mmc: add support for exynos specific implementation of dw-mshc
Thomas Abraham
- [PATCH] gpio: samsung: add devicetree init for s3c24xx arches
Thomas Abraham
- [PATCH] gpio: samsung: add devicetree init for s3c24xx arches
Thomas Abraham
- [PATCH v4 9/9] mmc: dw_mmc: add support for exynos specific implementation of dw-mshc
Thomas Abraham
- [PATCH v4 0/9] mmc: dw_mmc: add support for device tree based instantiation
Thomas Abraham
- [PATCH v4 9/9] mmc: dw_mmc: add support for exynos specific implementation of dw-mshc
Thomas Abraham
- [PATCH v4 9/9] mmc: dw_mmc: add support for exynos specific implementation of dw-mshc
Thomas Abraham
- [PATCH v4 9/9] mmc: dw_mmc: add support for exynos specific implementation of dw-mshc
Thomas Abraham
- [PATCH v4 9/9] mmc: dw_mmc: add support for exynos specific implementation of dw-mshc
Thomas Abraham
- [PATCH v4 4/9] mmc: dw_mmc: lookup for optional biu and ciu clocks
Thomas Abraham
- [PATCH v4 9/9] mmc: dw_mmc: add support for exynos specific implementation of dw-mshc
Thomas Abraham
- [PATCH v5 0/9] mmc: dw_mmc: add support for device tree based instantiation
Thomas Abraham
- [PATCH v5 1/9] mmc: dw_mmc: convert copy of struct device in struct dw_mci to a reference
Thomas Abraham
- [PATCH v5 2/9] mmc: dw_mmc: Use devm_* functions in dw_mmc platform driver
Thomas Abraham
- [PATCH v5 3/9] mmc: dw_mmc: allow probe to succeed even if one slot is initialized
Thomas Abraham
- [PATCH v5 4/9] mmc: dw_mmc: lookup for optional biu and ciu clocks
Thomas Abraham
- [PATCH v5 5/9] mmc: dw_mmc: add quirk to indicate missing write protect line
Thomas Abraham
- [PATCH v5 6/9] mmc: dw_mmc: add device tree support
Thomas Abraham
- [PATCH v5 7/9] mmc: dw_mmc: prepare functions in dw_mmc-pltfm for reuse
Thomas Abraham
- [PATCH v5 8/9] mmc: dw_mmc: add support for implementation specific callbacks
Thomas Abraham
- [PATCH v5 9/9] mmc: dw_mmc: add support for exynos specific implementation of dw-mshc
Thomas Abraham
- [PATCH v4 0/3] ARM: Exynos: Add support for MSHC controller
Thomas Abraham
- [PATCH v4 1/3] ARM: Samsung: Add support for MSHC controller clocks
Thomas Abraham
- [PATCH v4 2/3] ARM: Exynos5: Add AUXDATA support for MSHC controllers
Thomas Abraham
- [PATCH v4 3/3] ARM: dts: Add nodes for dw_mmc controllers for Samsung Exynos5250 platforms
Thomas Abraham
- [PATCH v5 4/9] mmc: dw_mmc: lookup for optional biu and ciu clocks
Thomas Abraham
- [PATCH v5 4/9] mmc: dw_mmc: lookup for optional biu and ciu clocks
Thomas Abraham
- [PATCH v5 4/9] mmc: dw_mmc: lookup for optional biu and ciu clocks
Thomas Abraham
- [PATCH 1/2] ARM: dts: Use active low flag for gpio-keys on Origen
Thomas Abraham
- [PATCH v5 4/9] mmc: dw_mmc: lookup for optional biu and ciu clocks
Thomas Abraham
- [PATCH] pinctrl: imx5: start numbering pad from 0
Dong Aisheng
- [PATCH] pinctrl: imx5: start numbering pad from 0
Dong Aisheng
- [PATCH] pinctrl: imx5: start numbering pad from 0
Dong Aisheng
- [PATCH] pinctrl: imx5: start numbering pad from 0
Dong Aisheng
- [PATCH 0/7] add imx-syscon driver for general registers access
Dong Aisheng
- [PATCH 1/7] mfd: add imx syscon driver based on regmap
Dong Aisheng
- [PATCH 2/7] ARM: imx6q: add iomuxc gpr support into imx-syscon
Dong Aisheng
- [PATCH 3/7] ARM: imx6q: add anatop support into imx-syscon
Dong Aisheng
- [PATCH 4/7] regulator: anatop-regulator: convert to use imx-syscon to access anatop register
Dong Aisheng
- [PATCH 5/7] ARM: imx6q: convert to use imx-syscon to access anatop registers
Dong Aisheng
- [PATCH 6/7] ARM: dts: imx6q: add simple-bus compatible string for anatop
Dong Aisheng
- [PATCH 7/7] mfd: anatop-mfd: remove anatop driver
Dong Aisheng
- [PATCH 1/7] mfd: add imx syscon driver based on regmap
Dong Aisheng
- [PATCH 6/7] ARM: dts: imx6q: add simple-bus compatible string for anatop
Dong Aisheng
- [PATCH 1/7] mfd: add imx syscon driver based on regmap
Dong Aisheng
- [PATCH 4/7] regulator: anatop-regulator: convert to use imx-syscon to access anatop register
Dong Aisheng
- [PATCH 1/7] mfd: add imx syscon driver based on regmap
Dong Aisheng
- [PATCH 4/7] regulator: anatop-regulator: convert to use imx-syscon to access anatop register
Dong Aisheng
- [PATCH 1/7] mfd: add imx syscon driver based on regmap
Dong Aisheng
- [PATCH 4/7] regulator: anatop-regulator: convert to use imx-syscon to access anatop register
Dong Aisheng
- [PATCH 4/7] regulator: anatop-regulator: convert to use imx-syscon to access anatop register
Dong Aisheng
- [PATCH v2 0/7] add syscon driver based on regmap for general registers access
Dong Aisheng
- [PATCH v2 1/7] mfd: add syscon driver based on regmap
Dong Aisheng
- [PATCH v2 2/7] ARM: imx6q: add iomuxc gpr support into syscon
Dong Aisheng
- [PATCH v2 3/7] ARM: imx6q: add anatop support into syscon
Dong Aisheng
- [PATCH v2 4/7] regulator: anatop-regulator: convert to use syscon to access anatop register
Dong Aisheng
- [PATCH v2 5/7] ARM: imx6q: convert to use syscon to access anatop registers
Dong Aisheng
- [PATCH v2 6/7] ARM: dts: imx6q: add simple-bus compatible string for anatop
Dong Aisheng
- [PATCH v2 7/7] mfd: anatop-mfd: remove anatop driver
Dong Aisheng
- [PATCH v2 1/7] mfd: add syscon driver based on regmap
Dong Aisheng
- [PATCH v2 4/7] regulator: anatop-regulator: convert to use syscon to access anatop register
Dong Aisheng
- [PATCH v2 5/7] ARM: imx6q: convert to use syscon to access anatop registers
Dong Aisheng
- [PATCH v3 0/7] add syscon driver based on regmap for general registers access
Dong Aisheng
- [PATCH v3 1/7] mfd: add syscon driver based on regmap
Dong Aisheng
- [PATCH v3 2/7] ARM: imx6q: add iomuxc gpr support into syscon
Dong Aisheng
- [PATCH v3 3/7] ARM: imx6q: add anatop support into syscon
Dong Aisheng
- [PATCH v3 4/7] regulator: anatop-regulator: convert to use syscon to access anatop register
Dong Aisheng
- [PATCH v3 5/7] ARM: imx6q: convert to use syscon to access anatop registers
Dong Aisheng
- [PATCH v3 6/7] ARM: dts: imx6q: add simple-bus compatible string for anatop
Dong Aisheng
- [PATCH v3 7/7] mfd: anatop-mfd: remove anatop driver
Dong Aisheng
- [PATCH v3 1/7] mfd: add syscon driver based on regmap
Dong Aisheng
- [PATCH v4 0/7] add syscon driver based on regmap for general registers access
Dong Aisheng
- [PATCH v4 1/7] mfd: add syscon driver based on regmap
Dong Aisheng
- [PATCH v4 2/7] ARM: imx6q: add iomuxc gpr support into syscon
Dong Aisheng
- [PATCH v4 3/7] ARM: imx6q: add anatop support into syscon
Dong Aisheng
- [PATCH v4 4/7] regulator: anatop-regulator: convert to use syscon to access anatop register
Dong Aisheng
- [PATCH v4 5/7] ARM: imx6q: convert to use syscon to access anatop registers
Dong Aisheng
- [PATCH v4 6/7] ARM: dts: imx6q: add simple-bus compatible string for anatop
Dong Aisheng
- [PATCH v4 7/7] mfd: anatop-mfd: remove anatop driver
Dong Aisheng
- <Query> How to read arguments from a gpio handle
Leela Krishna Amudala
- <Query> How to read arguments from a gpio handle
Leela Krishna Amudala
- <Query> Reg: Adding a gpio initialization sequence in dts is valid or not
Leela Krishna Amudala
- [PATCH V3 0/2] video: drm: Add Device tree support to DRM-FIMD
Leela Krishna Amudala
- [PATCH V3 1/2] drm/exynos: add platform_device_id table and driver data for exynos5 drm fimd
Leela Krishna Amudala
- [PATCH V3 2/2] video: drm: exynos: Add device tree support
Leela Krishna Amudala
- [PATCH V3 1/2] drm/exynos: add platform_device_id table and driver data for exynos5 drm fimd
Leela Krishna Amudala
- [PATCH V3 2/2] video: drm: exynos: Add device tree support
Leela Krishna Amudala
- <Query> Reg: Adding a gpio initialization sequence in dts is valid or not
Leela Krishna Amudala
- [PATCH V3 0/2] video: drm: Add Device tree support to DRM-FIMD
Leela Krishna Amudala
- [PATCH v2 1/2] can: c_can: Add device tree support to Bosch C_CAN/D_CAN controller
AnilKumar, Chimata
- [PATCH v3 0/3] Add DT support to C_CAN/D_CAN controller
AnilKumar, Chimata
- [PATCH v3 0/3] Add DT support to C_CAN/D_CAN controller
AnilKumar, Chimata
- [PATCH v3 1/3] can: c_can: Add device tree support to Bosch C_CAN/D_CAN controller
AnilKumar, Chimata
- [PATCH v4 1/3] can: c_can: Modify c_can device names
AnilKumar, Chimata
- [PATCH v3 1/2] lis3: add generic DT matching code
AnilKumar, Chimata
- [PATCH RESEND v2 1/2] arm/dts: Add AM33XX basic pinctrl support
AnilKumar, Chimata
- [PATCH v4 3/3] can: c_can: Add runtime PM support to Bosch C_CAN/D_CAN controller
AnilKumar, Chimata
- [PATCH v2 1/2] arm/dts: AM33XX: Add D_CAN device tree data
AnilKumar, Chimata
- [PATCH v3 1/2] lis3: add generic DT matching code
AnilKumar, Chimata
- [PATCH RESEND v2 1/2] arm/dts: Add AM33XX basic pinctrl support
AnilKumar, Chimata
- [PATCH] arm/dts: AM33XX: Set the default status of module to "disabled" state
AnilKumar, Chimata
- [PATCH v6 04/11] usb: otg: nop: add support for multiple tranceiver
Felipe Balbi
- [PATCH v2 1/2] drivers: bus: add a new driver for omap-ocp2scp
Felipe Balbi
- [PATCH v2 2/2] arm/dts: omap4: Add ocp2scp data
Felipe Balbi
- [PATCH v6 01/11] drivers: usb: otg: add a new driver for omap usb2 phy
Felipe Balbi
- [PATCH v6 02/11] arm/dts: omap: Add omap-usb2 dt data
Felipe Balbi
- [PATCH v6 03/11] drivers: usb: otg: make twl6030_usb as a comparator driver to omap_usb2
Felipe Balbi
- [PATCH v6 04/11] arm: omap: hwmod: add a new addr space in otg for writing to control module
Felipe Balbi
- [PATCH v6 05/11] drivers: usb: twl6030: Add dt support for twl6030 usb
Felipe Balbi
- [PATCH v6 06/11] arm/dts: Add twl6030-usb data
Felipe Balbi
- [PATCH v6 07/11] drivers: usb: twl4030: Add device tree support for twl4030 usb
Felipe Balbi
- [PATCH v6 08/11] arm/dts: Add twl4030-usb data
Felipe Balbi
- [PATCH v6 09/11] drivers: usb: musb: Add device tree support for omap musb glue
Felipe Balbi
- [PATCH v6 10/11] arm/dts: omap: Add usb_otg and glue data
Felipe Balbi
- [PATCH v6 11/11] arm: omap: phy: remove unused functions from omap-phy-internal.c
Felipe Balbi
- [PATCH 1/4] arm/dts: omap5-evm: Add I2C support
Felipe Balbi
- [PATCH v6 01/11] drivers: usb: otg: add a new driver for omap usb2 phy
Felipe Balbi
- [PATCH v6 00/11] omap: musb: Add device tree support
Felipe Balbi
- [PATCH] driver: misc: bmp085: remove "of_match_table" property.
Felipe Balbi
- [PATCH v6 01/11] drivers: usb: otg: add a new driver for omap usb2 phy
Felipe Balbi
- [PATCH v3 1/2] drivers: bus: add a new driver for omap-ocp2scp
Felipe Balbi
- [PATCH] driver: misc: bmp085: remove "of_match_table" property.
Felipe Balbi
- [PATCH v3 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
Felipe Balbi
- [PATCH v3 2/5] usb: s3c-hsotg: Adding phy driver support
Felipe Balbi
- [PATCH v2] usb: gadget: composite: parse dt values
Felipe Balbi
- [PATCH v3 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs
Felipe Balbi
- [PATCH v4 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
Felipe Balbi
- [PATCH v4 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs
Felipe Balbi
- [PATCH v4 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs
Felipe Balbi
- [PATCHv2 2/4] arm/dts: omap5-evm: Add tmp102 sensor support
Felipe Balbi
- [PATCHv7] arm/dts: omap4-sdp: Add keypad data
Felipe Balbi
- [PATCH 2/4] Input: keypad: Add smsc ece1099 keypad driver
Felipe Balbi
- [PATCH 2/4] Input: keypad: Add smsc ece1099 keypad driver
Felipe Balbi
- [PATCH 3/4] arm/dts: omap5-evm: Add keypad support
Felipe Balbi
- [RFC/PATCH 4/4] gpio: smscece: Add support for gpio IO expander feature
Felipe Balbi
- [RFC/PATCH 4/4] gpio: smscece: Add support for gpio IO expander feature
Felipe Balbi
- [RFC/PATCH 4/4] gpio: smscece: Add support for gpio IO expander feature
Felipe Balbi
- [PATCH 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver
Felipe Balbi
- [PATCH 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver
Felipe Balbi
- [PATCH 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver
Felipe Balbi
- [PATCH 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver
Felipe Balbi
- [PATCH v8 08/13] arm/dts: am33xx: Add dt data for usbss
Felipe Balbi
- [PATCH v9 01/13] usb: musb: dsps: add phy control logic to glue
Felipe Balbi
- [PATCH v9 01/13] usb: musb: dsps: add phy control logic to glue
Felipe Balbi
- [PATCH v2 1/1] ARM: dove: DT support for sdhci-dove
Chris Ball
- [PATCH] mmc: sdhci-s3c: Add device tree support
Chris Ball
- [PATCH] mmc: sdhci-s3c: Add device tree support
Chris Ball
- [PATCH] mmc: sdhci-s3c: Add device tree support
Chris Ball
- [PATCH] mmc: dt: Add 'broken-cd' DT binding
Chris Ball
- [PATCH] mmc: dt: Add 'broken-cd' DT binding
Chris Ball
- [PATCH] mmc: dt: Add 'broken-cd' DT binding
Chris Ball
- [PATCH] mmc: dt: Add 'broken-cd' DT binding
Chris Ball
- [PATCH] mmc: dt: Add 'broken-cd' DT binding
Chris Ball
- [PATCH] mmc: dt: Add 'broken-cd' DT binding
Chris Ball
- [PATCH] mmc: dt: Add 'broken-cd' DT binding
Chris Ball
- [PATCH] mmc: dt: Add 'broken-cd' DT binding
Chris Ball
- [PATCH] mmc: dt: Add 'broken-cd' DT binding
Chris Ball
- [PATCH] mmc: dt: Add card-detection properties to core binding.
Chris Ball
- [PATCH v4 0/2] Add device tree and clock support for G-Scaler
Shaik Ameer Basha
- [PATCH v4 1/2] ARM: EXYNOS: Add clock support for G-Scaler
Shaik Ameer Basha
- [PATCH v4 2/2] ARM: EXYNOS: Adds G-Scaler device from Device Tree
Shaik Ameer Basha
- [PATCH] mmc: sdhci-s3c: Add device tree support
Tushar Behera
- [PATCH 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs
Arnd Bergmann
- [PATCH 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs
Arnd Bergmann
- [PATCH v3 1/3] can: c_can: Add device tree support to Bosch C_CAN/D_CAN controller
Arnd Bergmann
- am33xx: default to status = "disabled"?
Arnd Bergmann
- [PATCH] arm/dts: AM33XX: Set the default status of module to "disabled" state
Arnd Bergmann
- [PATCH] arm/dts: omap5: Add mmc controller nodes and board data
Arnd Bergmann
- [PATCH v3 3/7] mv643xx.c: Add basic device tree support.
Arnd Bergmann
- [rtc-linux] [PATCH 8/8] ARM: vt8500: gpio: Devicetree support for arch-vt8500
Arnd Bergmann
- [PATCH 8/8] ARM: vt8500: gpio: Devicetree support for arch-vt8500
Arnd Bergmann
- [PATCH v3 0/7] mv643xx.c: Add basic device tree support.
Arnd Bergmann
- How to get the irq flags from the dts file
Arnd Bergmann
- [PATCH v3 0/7] mv643xx.c: Add basic device tree support.
Arnd Bergmann
- [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support
Arnd Bergmann
- [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support
Arnd Bergmann
- [PATCH 0/6] Integrator devicetree support
Arnd Bergmann
- [PATCH 1/6] ARM: integrator: call common init function from machine
Arnd Bergmann
- [PATCH 3/6] ARM: plat-versatile: add DT support to FPGA IRQ controller
Arnd Bergmann
- [PATCH 5/6] ARM: integrator: convert AMBA devices to device tree
Arnd Bergmann
- [PATCH v3 0/7] mv643xx.c: Add basic device tree support.
Arnd Bergmann
- [PATCH 0/6] Integrator devicetree support
Arnd Bergmann
- [PATCH] mmc: dt: Add 'broken-cd' DT binding
Arnd Bergmann
- [PATCH] mmc: dt: Add 'broken-cd' DT binding
Arnd Bergmann
- [PATCHv3 3/9] serial: vt8500: Add devicetree support for
Arnd Bergmann
- [RESEND PATCH v4 0/2] omap: add ocp2scp as a bus driver
Arnd Bergmann
- [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***
Arnd Bergmann
- [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***
Arnd Bergmann
- [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***
Arnd Bergmann
- [PATCH v6] ARM: mtd: nand: davinci: add OF support for davinci nand controller
Artem Bityutskiy
- [PATCH v2] mtd: physmap_of: Add "no-unaligned-direct-access" DT property
Artem Bityutskiy
- [PATCH V4] mtd: m25p80: Make fast read configurable via DT
Artem Bityutskiy
- [PATCH] powerpc/44x: Support OCM(On Chip Memory) for APM821xx SoC and Bluestone board
Josh Boyer
- [RFC][PATCH v3 1/3] runtime interpreted power sequences
Mitch Bradley
- DT GPIO numbering?
Mitch Bradley
- [RFC:PATCH 3.6.0-rc1] dtc: Add -P option to dtc for Pre-Processing.
Mitch Bradley
- [PATCH v4 1/3] Runtime Interpreted Power Sequences
Mitch Bradley
- Device tree node names
Mitch Bradley
- Associating devices with multiple parents
Mitch Bradley
- Device tree node names
Mitch Bradley
- [RFC:PATCH dtc-1.3.0] dtc: Add --strip-disabled option to dtc.
Mitch Bradley
- [PATCH] mmc: dt: Add 'broken-cd' DT binding
Mitch Bradley
- [PATCH] mmc: dt: Add 'broken-cd' DT binding
Mitch Bradley
- [RFC][PATCH v3 1/3] runtime interpreted power sequences
Mark Brown
- [RFC][PATCH v3 1/3] runtime interpreted power sequences
Mark Brown
- [RFC][PATCH v3 1/3] runtime interpreted power sequences
Mark Brown
- [RFC][PATCH v3 1/3] runtime interpreted power sequences
Mark Brown
- [RFC][PATCH v3 1/3] runtime interpreted power sequences
Mark Brown
- [RFC][PATCH v3 1/3] runtime interpreted power sequences
Mark Brown
- [RFC][PATCH v3 1/3] runtime interpreted power sequences
Mark Brown
- [RFC][PATCH v3 1/3] runtime interpreted power sequences
Mark Brown
- [RFC][PATCH v3 1/3] runtime interpreted power sequences
Mark Brown
- [PATCH 1/2] SPI: spi-gpio: store chipselect information in private structure
Mark Brown
- [PATCH] regulator: tps6586x: add support for SYS rail
Mark Brown
- [PATCH] regulator: tps6586x: add support for SYS rail
Mark Brown
- [PATCH] mfd: add MAX8907 core driver
Mark Brown
- [PATCH] mfd: add MAX8907 core driver
Mark Brown
- [RFC][PATCH v3 1/3] runtime interpreted power sequences
Mark Brown
- [PATCH V2] regulator: tps6586x: add support for SYS rail
Mark Brown
- [PATCH] regulator: tps6586x: add support for SYS rail
Mark Brown
- [PATCH resend 1/2] SPI: spi-gpio: store chipselect information in private structure
Mark Brown
- [RFC][PATCH v3 1/3] runtime interpreted power sequences
Mark Brown
- [PATCH] driver: misc: bmp085: remove "of_match_table" property.
Mark Brown
- [PATCH] driver: misc: bmp085: remove "of_match_table" property.
Mark Brown
- [PATCH 00/11] ARM/ASoC: OMAP McBSP device tree support
Mark Brown
- [PATCH 04/11] MFD: twl4030-audio: Add DT support
Mark Brown
- [PATCH 04/11] MFD: twl4030-audio: Add DT support
Mark Brown
- [PATCH 0/4] ASoC/OMAP: ASoC machine driver for simple SoC with twl4030
Mark Brown
- [PATCH v2 3/4] regulator: add a new API regulator_set_voltage_tol()
Mark Brown
- [PATCH 04/11] MFD: twl4030-audio: Add DT support
Mark Brown
- [PATCH 04/11] MFD: twl4030-audio: Add DT support
Mark Brown
- [PATCH 04/11] MFD: twl4030-audio: Add DT support
Mark Brown
- [PATCH 04/11] MFD: twl4030-audio: Add DT support
Mark Brown
- [PATCH 04/11] MFD: twl4030-audio: Add DT support
Mark Brown
- [PATCH v2 3/4] regulator: add a new API regulator_set_voltage_tol()
Mark Brown
- [PATCH 2/3] mfd: twl6040: Add twl6040-gpio child
Mark Brown
- How to get the irq flags from the dts file
Mark Brown
- [PATCH V3] regulator: tps6586x: add support for SYS rail
Mark Brown
- [PATCH 04/11] MFD: twl4030-audio: Add DT support
Mark Brown
- [PATCH V3] regulator: tps6586x: add support for SYS rail
Mark Brown
- [PATCH] spi: spi-altera: Use of_match_ptr
Mark Brown
- [PATCH v2 0/4] ASoC machine driver for simple SoC with twl4030
Mark Brown
- [PATCH] spi: spi-altera: Use of_match_ptr
Mark Brown
- [PATCH v4 1/3] Runtime Interpreted Power Sequences
Mark Brown
- [PATCH v4 1/3] Runtime Interpreted Power Sequences
Mark Brown
- [PATCH v3 0/9] ARM/ASoC: OMAP McBSP device tree support
Mark Brown
- Associating devices with multiple parents
Mark Brown
- Device tree node names
Mark Brown
- [PATCH v4 1/3] Runtime Interpreted Power Sequences
Mark Brown
- [PATCH 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver
Mark Brown
- [PATCH 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver
Mark Brown
- [PATCH 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver
Mark Brown
- [PATCH 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver
Mark Brown
- [PATCH 1/4] mfd: smsc: Add support for smsc gpio io/keypad driver
Mark Brown
- [RFC/PATCH 4/4] gpio: smscece: Add support for gpio IO expander feature
Mark Brown
- [PATCH v4 1/3] Runtime Interpreted Power Sequences
Mark Brown
- [PATCH 4/7] regulator: anatop-regulator: convert to use imx-syscon to access anatop register
Mark Brown
- [PATCH 1/7] mfd: add imx syscon driver based on regmap
Mark Brown
- [PATCH] spi: Master driver for NXP SC18IS602/603
Mark Brown
- [PATCH v6 3/3] DT bindings documentation: "num-cs" property for SPI controllers
Mark Brown
- [PATCH v3 1/9] ARM/ASoC: omap-mcbsp: Move OMAP2+ clock parenting code to ASoC driver
Mark Brown
- [PATCH v3 2/9] ARM: OMAP: mcbsp: Enable FIFO use for OMAP2430
Mark Brown
- [PATCH v3 3/9] ARM: OMAP: board-am3517evm: Configure McBSP1 CLKR/FSR signal source
Mark Brown
- [PATCH v3 4/9] ASoC: am3517evm: Do not configure McBSP1 CLKR/FSR signal muxing
Mark Brown
- [PATCH v3 5/9] ARM/ASoC: omap-mcbsp: Remove CLKR/FSR mux configuration code
Mark Brown
- [PATCH v3 6/9] ASoC: omap-mcbsp: Remove unused defines
Mark Brown
- [PATCH v3 7/9] ASoC: omap-mcbsp: Remove cpu_is_omap* checks from the code
Mark Brown
- [PATCH v3 8/9] ARM: OMAP2+: McBSP: Do not create legacy devices when booting with DT data
Mark Brown
- [PATCH v3 9/9] ASoC: omap-mcbsp: Add device tree bindings
Mark Brown
- [PATCH] ASoC: omap-mcbsp: Device tree binding documentation update
Mark Brown
- [PATCH] spi: Master driver for NXP SC18IS602/603
Mark Brown
- [PATCH 1/7] mfd: add imx syscon driver based on regmap
Mark Brown
- [PATCH 4/7] regulator: anatop-regulator: convert to use imx-syscon to access anatop register
Mark Brown
- [PATCH v2 02/14] MFD: twl4030-audio: Convert to use devm_kzalloc
Mark Brown
- [patch] video: mb862xxfb: prevent divide by zero bug
Dan Carpenter
- [PATCH v3 0/3] Add DT support to C_CAN/D_CAN controller
AnilKumar Ch
- [PATCH v3 1/3] can: c_can: Add device tree support to Bosch C_CAN/D_CAN controller
AnilKumar Ch
- [PATCH v3 2/3] can: c_can: Modify c_can device names in c_can_pci driver
AnilKumar Ch
- [PATCH v3 3/3] can: c_can: Add runtime PM support to Bosch C_CAN/D_CAN controller
AnilKumar Ch
- [PATCH v3 0/3] Add DT support to C_CAN/D_CAN controller
AnilKumar Ch
- [PATCH v4 1/3] can: c_can: Modify c_can device names
AnilKumar Ch
- [PATCH v4 2/3] can: c_can: Add device tree support to Bosch C_CAN/D_CAN controller
AnilKumar Ch
- [PATCH v4 3/3] can: c_can: Add runtime PM support to Bosch C_CAN/D_CAN controller
AnilKumar Ch
- [PATCH 0/4] Add device tree data for AM33XX devices
AnilKumar Ch
- [PATCH v4 1/4] arm/dts: AM33XX: Add basic pinctrl device tree data
AnilKumar Ch
- [PATCH v4 2/4] arm/dts: AM33XX: Configure pinmuxs for user leds control on Bone
AnilKumar Ch
- [PATCH v3 3/4] arm/dts: AM33XX: Configure pinmuxs for D_CAN1 on AM335x-EVM
AnilKumar Ch
- [PATCH v3 4/4] arm/dts: AM33XX: Add D_CAN device tree data
AnilKumar Ch
- [PATCH v4 0/3] Add device tree data for AM33XX devices
AnilKumar Ch
- [PATCH RESEND v4 1/3] arm/dts: AM33XX: Add basic pinctrl device tree data
AnilKumar Ch
- [PATCH RESEND v4 2/3] arm/dts: AM33XX: Configure pinmuxs for user leds control on Bone
AnilKumar Ch
- [PATCH v4 3/3] arm/dts: AM33XX: Add D_CAN device tree data
AnilKumar Ch
- [PATCH v5 0/5] Add device tree data for AM33XX devices
AnilKumar Ch
- [PATCH v5 1/5] arm/dts: AM33XX: Add basic pinctrl device tree data
AnilKumar Ch
- [PATCH v5 2/5] arm/dts: AM33XX: Configure pinmuxs for user leds control on Bone
AnilKumar Ch
- [PATCH v5 3/5] arm/dts: AM33XX: Add D_CAN device tree data
AnilKumar Ch
- [PATCH 4/5] leds: leds-gpio: adopt pinctrl support
AnilKumar Ch
- [PATCH 5/5] of: Modify c_can binding documentation
AnilKumar Ch
- [PATCH 0/2] ARM: OMAP2: AM33XX: Add cpufreq support
AnilKumar Ch
- [PATCH 1/2] ARM: OMAP2+: AM33XX: Add clock entries to omap_clk data
AnilKumar Ch
- [PATCH 2/2] arm/dts: AM33XX: Add device tree OPP table
AnilKumar Ch
- [PATCH v4 1/3] Runtime Interpreted Power Sequences
Alex Courbot
- [PATCH v4 1/3] Runtime Interpreted Power Sequences
Alex Courbot
- [PATCH v4 1/3] Runtime Interpreted Power Sequences
Alex Courbot
- [PATCH v5 0/4] Runtime Interpreted Power Sequences
Alexandre Courbot
- [PATCH v5 1/4] Runtime Interpreted Power Sequences
Alexandre Courbot
- [PATCH v5 2/4] pwm_backlight: use power sequences
Alexandre Courbot
- [PATCH v5 3/4] tegra: dt: add label to tegra20's PWM
Alexandre Courbot
- [PATCH v5 4/4] tegra: ventana: add pwm backlight DT nodes
Alexandre Courbot
- [PATCH] hwmon: tmp102: Add device tree support
Benoit Cousson
- [PATCH 04/11] MFD: twl4030-audio: Add DT support
Benoit Cousson
- [PATCH 04/11] MFD: twl4030-audio: Add DT support
Benoit Cousson
- [PATCHv7] arm/dts: omap4-sdp: Add keypad data
Benoit Cousson
- [PATCHv2 2/4] arm/dts: omap5-evm: Add tmp102 sensor support
Benoit Cousson
- [PATCHv2 2/4] arm/dts: omap5-evm: Add tmp102 sensor support
Benoit Cousson
- [PATCHv2 0/4] Add device tree data for omap5
Benoit Cousson
- [PATCHv7] arm/dts: omap4-sdp: Add keypad data
Benoit Cousson
- [PATCHv3 0/4] Add device tree data for omap5
Benoit Cousson
- [PATCHv3 0/4] Add device tree data for omap5
Benoit Cousson
- [PATCHv3 0/4] Add device tree data for omap5
Benoit Cousson
- [PATCHv3 3/9] serial: vt8500: Add devicetree support for vt8500-serial
Alan Cox
- [PATCHv4 3/9] serial: vt8500: Add devicetree support for vt8500-serial
Alan Cox
- [PATCH 3/6] OF: pinctrl: MIPS: lantiq: adds support for FALCON SoC
John Crispin
- [PATCH] DT: export of_irq_to_resource_table()
John Crispin
- [PATCH] netdev/phy: skip disabled mdio-mux nodes
David Daney
- [PATCH 2/2] spi: Add SPI master controller for OCTEON SOCs.
David Daney
- [2/2] spi: Add SPI master controller for OCTEON SOCs.
David Daney
- [PATCH 0/2] SPI EEPROM / device tree interaction improvements.
David Daney
- [PATCH 1/2] misc/at25, dt: Improve at25 SPI eeprom device tree bindings.
David Daney
- [PATCH 2/2] misc/at25: Add an .id_table to at25 to facilitate driver loading and binding.
David Daney
- [PATCH] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped FPGA
David Daney
- [PATCH] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped FPGA
David Daney
- [RFC] How should the device tree represent multiple Ethernet PHYs in a single package?
David Daney
- [PATCH v2] serial: pl011: honour serial aliases in device tree
Will Deacon
- Challenges of migrating to DT
Daniel Drake
- Atmel bindings to pinctrl/pinmux/etc
Nicolas Ferre
- [PATCH 02/23] of_spi: add generic binding support to specify cs gpio
Richard Genoud
- [PATCH 08/23] spi/atmel: add DT support
Richard Genoud
- [PATCH 05/14] ARM: at91: add pinctrl support
Richard Genoud
- [PATCH 05/14] ARM: at91: add pinctrl support
Richard Genoud
- [PATCH V2] dtc: Add ability to delete nodes and properties
David Gibson
- [RFC:PATCH 3.6.0-rc1] dtc: Add -P option to dtc for Pre-Processing.
David Gibson
- [RFC:PATCH 3.6.0-rc1] dtc: Add -P option to dtc for Pre-Processing.
David Gibson
- [RFC:PATCH dtc-1.3.0] dtc: Add --strip-disabled option to dtc.
David Gibson
- [RFC:PATCH dtc-1.3.0] dtc: Add --strip-disabled option to dtc.
David Gibson
- [RFC:PATCH dtc-1.3.0] dtc: Add --strip-disabled option to dtc.
David Gibson
- [RFC:PATCH dtc-1.3.0] dtc: Add --strip-disabled option to dtc.
David Gibson
- [PATCH v2 dtc-1.3.0] dtc: Add --strip-disabled option to dtc(v2).
David Gibson
- RFC: New release for DTC?
David Gibson
- Challenges of migrating to DT
David Gibson
- [PATCH 3/4] ARM: OMAP3: Switch to use the unified audio driver (omap-twl4030) for selected boards
Igor Grinberg
- [PATCH 3/4] ARM: OMAP3: Switch to use the unified audio driver (omap-twl4030) for selected boards
Igor Grinberg
- [PATCH 3/4] ARM: OMAP3: Switch to use the unified audio driver (omap-twl4030) for selected boards
Igor Grinberg
- [PATCH v2 3/4] ARM: OMAP3: Switch to use the unified audio driver (omap-twl4030) for selected boards
Igor Grinberg
- [PATCH v2 0/4] Add a generic cpufreq-cpu0 driver
Shawn Guo
- [PATCH v2 1/4] ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp
Shawn Guo
- [PATCH v2 2/4] PM / OPP: Initialize OPP table from device tree
Shawn Guo
- [PATCH v2 3/4] regulator: add a new API regulator_set_voltage_tol()
Shawn Guo
- [PATCH v2 4/4] cpufreq: Add a generic cpufreq-cpu0 driver
Shawn Guo
- [PATCH v2 2/4] PM / OPP: Initialize OPP table from device tree
Shawn Guo
- [PATCH v2 2/4] PM / OPP: Initialize OPP table from device tree
Shawn Guo
- [PATCH v2 3/4] regulator: add a new API regulator_set_voltage_tol()
Shawn Guo
- [PATCH v3 0/3] Add a generic cpufreq-cpu0 driver
Shawn Guo
- [PATCH v3 1/3] ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp
Shawn Guo
- [PATCH v3 2/3] PM / OPP: Initialize OPP table from device tree
Shawn Guo
- [PATCH v3 3/3] cpufreq: Add a generic cpufreq-cpu0 driver
Shawn Guo
- [PATCH v3 2/3] Input: add devicetree binding note for egalax_ts
Shawn Guo
- [PATCH v3 3/3] ARM: dts: imx6q-sabrelite: add eeti egalax
Shawn Guo
- [PATCH] pinctrl: imx5: start numbering pad from 0
Shawn Guo
- [PATCH] pinctrl: imx5: start numbering pad from 0
Shawn Guo
- [PATCH] pinctrl: imx5: start numbering pad from 0
Shawn Guo
- [PATCH 0/2] Move imx6q clock lookup over to device tree
Shawn Guo
- [PATCH 1/2] clk: add of_clk_src_onecell_get() support
Shawn Guo
- [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup
Shawn Guo
- [PATCH v4 1/3] Input: egalax_ts: get gpio from devicetree node
Shawn Guo
- [PATCH v4 2/3] Input: add devicetree binding note for egalax_ts
Shawn Guo
- [PATCH v4 3/3] ARM: dts: imx6q-sabrelite: add eeti egalax
Shawn Guo
- [PATCH v3 2/3] PM / OPP: Initialize OPP table from device tree
Shawn Guo
- [PATCH 1/2] clk: add of_clk_src_onecell_get() support
Shawn Guo
- [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup
Shawn Guo
- [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup
Shawn Guo
- [PATCH v2] devicetree: serial: Add documentation for imx serial
Shawn Guo
- [PATCH] devicetree: serial: Add documentation for mxs auart
Shawn Guo
- [PATCH] mmc: dt: Add 'broken-cd' DT binding
Shawn Guo
- [PATCH] mmc: dt: Add 'broken-cd' DT binding
Shawn Guo
- [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup
Shawn Guo
- [PATCH] mmc: dt: Add 'broken-cd' DT binding
Shawn Guo
- [PATCH v2 0/4] Move imx6q/28/23 clock lookup over to device tree
Shawn Guo
- [PATCH v2 1/4] clk: add of_clk_src_onecell_get() support
Shawn Guo
- [PATCH v2 2/4] ARM: imx6q: replace clk_register_clkdev with clock DT lookup
Shawn Guo
- [PATCH v2 3/4] clk: mxs: replace imx28 clk_register_clkdev with clock DT lookup
Shawn Guo
- [PATCH v2 4/4] clk: mxs: replace imx23 clk_register_clkdev with clock DT lookup
Shawn Guo
- Can one set GPIO direction in pinmux definition?
Shawn Guo
- [PATCH] ARM: dts: imx: add imx5x usb entries
Shawn Guo
- [PATCH] mmc: dt: Add card-detection properties to core binding.
Shawn Guo
- [PATCH 1/7] mfd: add imx syscon driver based on regmap
Shawn Guo
- [PATCH v2 1/7] mfd: add syscon driver based on regmap
Shawn Guo
- [PATCH v2 4/7] regulator: anatop-regulator: convert to use syscon to access anatop register
Shawn Guo
- [PATCH v4 1/7] mfd: add syscon driver based on regmap
Shawn Guo
- [PATCH v4 7/7] mfd: anatop-mfd: remove anatop driver
Shawn Guo
- [PATCH v4 2/7] ARM: imx6q: add iomuxc gpr support into syscon
Shawn Guo
- [PATCH v2 1/4] clk: add of_clk_src_onecell_get() support
Shawn Guo
- [PATCH v3 0/3] Add a generic cpufreq-cpu0 driver
Shawn Guo
- [patch] video: mb862xxfb: prevent divide by zero bug
Anatolij Gustschin
- [PATCH 1/2] powerpc/mpc5200: add dts files for ifm camera machines
Anatolij Gustschin
- [PATCH 2/2] dt/misc: add bindings documentation for ifm camera sensor interface
Anatolij Gustschin
- [PATCH v2 1/2] powerpc/mpc5200: add dts files for ifm camera machines
Anatolij Gustschin
- [PATCH v2] of: Add videomode helper
Sascha Hauer
- [PATCH V3 2/2] video: drm: exynos: Add device tree support
Sascha Hauer
- [PATCH v6 1/3] USB: chipidea: add imx usbmisc support
Sascha Hauer
- [PATCH v6 1/3] USB: chipidea: add imx usbmisc support
Sascha Hauer
- [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support
Bjorn Helgaas
- [PATCH v3 05/10] resource: add PCI configuration space support
Bjorn Helgaas
- [PATCH v3 01/10] PCI: Keep pci_fixup_irqs() around after init
Bjorn Helgaas
- [PATCH v3 05/10] resource: add PCI configuration space support
Bjorn Helgaas
- [PATCH v3 05/10] resource: add PCI configuration space support
Bjorn Helgaas
- [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support
Bjorn Helgaas
- [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support
Bjorn Helgaas
- [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support
Bjorn Helgaas
- [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support
Bjorn Helgaas
- [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support
Bjorn Helgaas
- [PATCH v3 01/10] PCI: Keep pci_fixup_irqs() around after init
Bjorn Helgaas
- [PATCH v3 01/10] PCI: Keep pci_fixup_irqs() around after init
Bjorn Helgaas
- [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support
Bjorn Helgaas
- [PATCH v3 09/10] of: Add of_pci_parse_ranges()
Rob Herring
- [PATCH v3 08/10] of/address: Handle #address-cells > 2 specially
Rob Herring
- [PATCH v2] gpio: Add Avionic Design N-bit GPIO expander support
Rob Herring
- [PATCH] of: Allow busses with #size-cells=0
Rob Herring
- [PATCH v2 2/4] PM / OPP: Initialize OPP table from device tree
Rob Herring
- [PATCH v2 2/4] PM / OPP: Initialize OPP table from device tree
Rob Herring
- [PATCH v3 1/2] lis3: add generic DT matching code
Rob Herring
- [RFC:PATCH 3.6.0-rc1] dt/platform: Add platform dev instance id in dt probing.
Rob Herring
- <Query> Reg: Adding a gpio initialization sequence in dts is valid or not
Rob Herring
- [PATCH 1/8] of/irq: Create stub for of_irq_find_parent when !CONFIG_OF
Rob Herring
- [PATCH 1/8] of/irq: Create stub for of_irq_find_parent when !CONFIG_OF
Rob Herring
- [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support
Rob Herring
- [PATCH] spi: spi-altera: Use of_match_ptr
Rob Herring
- [PATCH v3 2/3] PM / OPP: Initialize OPP table from device tree
Rob Herring
- [PATCH 2/2] ahci_platform: add custom hard reset for Calxeda ahci ctrlr
Rob Herring
- dynamic device tree char driver
Rob Herring
- [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup
Rob Herring
- [PATCH RESEND v4] spi/pl022: add devicetree support
Rob Herring
- [PATCH RESEND v4] spi/pl022: add devicetree support
Rob Herring
- [PATCH RESEND v4] spi/pl022: add devicetree support
Rob Herring
- [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup
Rob Herring
- [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup
Rob Herring
- [PATCH] serial: pl011: honour serial aliases in device tree
Rob Herring
- [PATCH] mmc: dt: Add 'broken-cd' DT binding
Rob Herring
- [PATCH] mmc: dt: Add 'broken-cd' DT binding
Rob Herring
- [PATCH] mmc: dt: Add 'broken-cd' DT binding
Rob Herring
- dynamic device tree char driver
Rob Herring
- [PATCH v2] devicetree: pwm: mxs-pwm.txt: Fix reg field annotation
Rob Herring
- [PATCH v2] devicetree: serial: Add documentation for imx serial
Rob Herring
- Device tree node names
Rob Herring
- [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup
Rob Herring
- [PATCH v2 1/4] clk: add of_clk_src_onecell_get() support
Rob Herring
- [PATCH] DT: export of_irq_to_resource_table()
Rob Herring
- [PATCH v3 06/25] docs: Xen ARM DT bindings
Rob Herring
- [PATCH] of: add devres version of of_iomap
Rob Herring
- [PATCH] of: add devres version of of_iomap
Rob Herring
- [PATCH 1/2] net: davinci_mdio: enable and disable clock
Vaibhav Hiremath
- [PATCH 1/2] net: davinci_mdio: enable and disable clock
Hiremath, Vaibhav
- [PATCH v2 1/2] arm/dts: AM33XX: Add D_CAN device tree data
Vaibhav Hiremath
- [PATCH v4 3/3] can: c_can: Add runtime PM support to Bosch C_CAN/D_CAN controller
Hiremath, Vaibhav
- [PATCH v7 00/11] usb: musb: adding multi instance support
Hiremath, Vaibhav
- [PATCH v2 1/2] arm/dts: AM33XX: Add D_CAN device tree data
Vaibhav Hiremath
- am33xx: default to status = "disabled"?
Hiremath, Vaibhav
- [PATCH v7 00/11] usb: musb: adding multi instance support
Hiremath, Vaibhav
- [PATCH v7 00/11] usb: musb: adding multi instance support
Hiremath, Vaibhav
- [PATCH v4 3/3] can: c_can: Add runtime PM support to Bosch C_CAN/D_CAN controller
Hiremath, Vaibhav
- [PATCH] arm/dts: AM33XX: Set the default status of module to "disabled" state
Vaibhav Hiremath
- [PATCH] arm/dts: AM33XX: Set the default status of module to "disabled" state
Hiremath, Vaibhav
- [RFC RESEND 1/4] arm/dts: OMAP: Add timer nodes
Vaibhav Hiremath
- [RFC RESEND 2/4] ARM: OMAP3: Dynamically disable secure timer nodes for secure devices
Vaibhav Hiremath
- [PATCH-V2] arm/dts: AM33XX: Set the default status of module to "disabled" state
Vaibhav Hiremath
- [RFC RESEND 2/4] ARM: OMAP3: Dynamically disable secure timer nodes for secure devices
Hiremath, Vaibhav
- [RFC RESEND 2/4] ARM: OMAP3: Dynamically disable secure timer nodes for secure devices
Hiremath, Vaibhav
- [PATCH] ARM: AM33XX: clock: Add dcan clock aliases for device-tree
Vaibhav Hiremath
- [PATCH 0/2] arm/dts: AM33XX: Add reg and interrupt property for all nodes
Vaibhav Hiremath
- [PATCH 1/2] arm/dts: AM33XX: Convert all hex numbers to lower-case
Vaibhav Hiremath
- [PATCH 2/2] arm/dts: AM33XX: Specify reg and interrupt property for all nodes
Vaibhav Hiremath
- [PATCH] ARM: AM33XX: clock: Add dcan clock aliases for device-tree
Hiremath, Vaibhav
- [PATCH] ARM: AM33XX: clock: Add dcan clock aliases for device-tree
Hiremath, Vaibhav
- [PATCH v3 3/4] arm/dts: AM33XX: Configure pinmuxs for D_CAN1 on AM335x-EVM
Vaibhav Hiremath
- [RFC PATCH] ARM: OMAP2+: omap-device: Do not overwrite resources allocated by OF layer
Vaibhav Hiremath
- [PATCH RESEND v4 1/3] arm/dts: AM33XX: Add basic pinctrl device tree data
Vaibhav Hiremath
- [PATCH 0/2] mfd: dt: add power off support for Tegra20/Tegra30
Bill Huang
- [PATCH 1/2] mfd: dt: tps6586x: Add power off control
Bill Huang
- [PATCH 2/2] mfd: dt: tps65910: add power off control
Bill Huang
- [PATCH 1/2] mfd: dt: tps6586x: Add power off control
Bill Huang
- [PATCH v2 0/2] mfd: dt: add power off support for Tegra20/Tegra30
Bill Huang
- [PATCH v2 1/2] mfd: dt: tps6586x: Add power off control
Bill Huang
- [PATCH v2 2/2] mfd: dt: tps65910: add power off control
Bill Huang
- [PATCH v2 1/2] mfd: dt: tps6586x: Add power off control
Bill Huang
- [PATCH v2 1/2] mfd: dt: tps6586x: Add power off control
Bill Huang
- [PATCH v2 1/2] mfd: dt: tps6586x: Add power off control
Bill Huang
- [PATCH V3 1/2] of: Add generic device tree DMA helpers
Jon Hunter
- [RFC RESEND 1/4] arm/dts: OMAP: Add timer nodes
Jon Hunter
- [RFC RESEND 2/4] ARM: OMAP3: Dynamically disable secure timer nodes for secure devices
Jon Hunter
- [RFC RESEND 2/4] ARM: OMAP3: Dynamically disable secure timer nodes for secure devices
Jon Hunter
- [PATCH v3 0/2] omap: add ocp2scp as a bus driver
Kishon Vijay Abraham I
- [PATCH v3 1/2] drivers: bus: add a new driver for omap-ocp2scp
Kishon Vijay Abraham I
- [PATCH v3 2/2] arm/dts: omap4: Add ocp2scp data
Kishon Vijay Abraham I
- [PATCH v7 0/7] omap: musb: Add device tree support
Kishon Vijay Abraham I
- [PATCH v7 1/7] drivers: usb: phy: add a new driver for omap usb2 phy
Kishon Vijay Abraham I
- [PATCH v7 2/7] arm: omap: hwmod: add a new addr space in otg for writing to control module
Kishon Vijay Abraham I
- [PATCH v7 3/7] drivers: usb: otg: make twl6030_usb as a comparator driver to omap_usb2
Kishon Vijay Abraham I
- [PATCH v7 4/7] drivers: usb: twl6030: Add dt support for twl6030 usb
Kishon Vijay Abraham I
- [PATCH v7 5/7] drivers: usb: twl4030: Add device tree support for twl4030 usb
Kishon Vijay Abraham I
- [PATCH v7 6/7] drivers: usb: musb: Add device tree support for omap musb glue
Kishon Vijay Abraham I
- [PATCH v7 7/7] arm: omap: phy: remove unused functions from omap-phy-internal.c
Kishon Vijay Abraham I
- [PATCH v4 0/2] omap: add ocp2scp as a bus driver
Kishon Vijay Abraham I
- [PATCH v4 1/2] drivers: bus: add a new driver for omap-ocp2scp
Kishon Vijay Abraham I
- [PATCH v4 2/2] arm/dts: omap4: Add ocp2scp data
Kishon Vijay Abraham I
- [RESEND PATCH v4 0/2] omap: add ocp2scp as a bus driver
Kishon Vijay Abraham I
- [RESEND PATCH v4 1/2] drivers: bus: add a new driver for omap-ocp2scp
Kishon Vijay Abraham I
- [RESEND PATCH v4 2/2] arm/dts: omap4: Add ocp2scp data
Kishon Vijay Abraham I
- [PATCH v3 2/2] ARM: EXYNOS: Add Gscaler device from DT
Olof Johansson
- [PATCH] arm/dts: omap5: Add mmc controller nodes and board data
Balaji T K
- [RFC:PATCH dtc-1.3.0] dtc: Add --strip-disabled option to dtc.
Srinivas KANDAGATLA
- [RFC:PATCH dtc-1.3.0] dtc: Add --strip-disabled option to dtc.
Srinivas KANDAGATLA
- [RFC:PATCH dtc-1.3.0] dtc: Add --strip-disabled option to dtc.
Srinivas KANDAGATLA
- [PATCH v2 dtc-1.3.0] dtc: Add --strip-disabled option to dtc(v2).
Srinivas KANDAGATLA
- [PATCH v2 dtc-1.3.0] dtc: Add --strip-disabled option to dtc(v2).
Srinivas KANDAGATLA
- [PATCH 3.6.0-rc3 1/2] of/mdio: Add dummy functions in of_mdio.h.
Srinivas KANDAGATLA
- [PATCH 3.6.0-rc3 2/2] of/mdio-gpio: Simplify the way device tree support is implemented.
Srinivas KANDAGATLA
- [PATCH] of: adding devres version of of_iomap
Karicheri, Muralidharan
- [PATCH] of: add devres version of of_iomap
Karicheri, Muralidharan
- [PATCH] gpio: samsung: add devicetree init for s3c24xx arches
Vasily Khoruzhick
- [PATCH] gpio: samsung: add devicetree init for s3c24xx arches
Vasily Khoruzhick
- [PATCH v3 1/2] ARM: EXYNOS: Add clock support for Gscaler
Kukjin Kim
- [PATCH v3 2/2] ARM: EXYNOS: Add Gscaler device from DT
Kukjin Kim
- [PATCH v3 2/2] ARM: EXYNOS: Add Gscaler device from DT
Kukjin Kim
- [PATCH v3 2/2] ARM: EXYNOS: Add Gscaler device from DT
Kukjin Kim
- [PATCH v2 0/5] usb: phy: samsung: Introducing usb phy driver for samsung SoCs
Kukjin Kim
- [PATCH v3 2/2] ARM: EXYNOS: Add Gscaler device from DT
Kukjin Kim
- [PATCH v3 2/2] ARM: EXYNOS: Add Gscaler device from DT
Kukjin Kim
- [PATCH] ARM: EXYNOS: Add MFC device tree support
Kukjin Kim
- [PATCH v2] gpio: samsung: add devicetree init for s3c24xx arches
Kukjin Kim
- [PATCH] spi: spi-altera: Use of_match_ptr
Tobias Klauser
- [PATCH 1/2] input: samsung-keypad: Use of_match_ptr()
Tobias Klauser
- [PATCH v2 1/2] can: c_can: Add device tree support to Bosch C_CAN/D_CAN controller
Marc Kleine-Budde
- [PATCH v3 0/3] Add DT support to C_CAN/D_CAN controller
Marc Kleine-Budde
- [PATCH v3 0/3] Add DT support to C_CAN/D_CAN controller
Marc Kleine-Budde
- [PATCH v3 0/3] Add DT support to C_CAN/D_CAN controller
Marc Kleine-Budde
- [PATCH v4 3/3] can: c_can: Add runtime PM support to Bosch C_CAN/D_CAN controller
Marc Kleine-Budde
- [PATCH v4 1/3] can: c_can: Modify c_can device names
Marc Kleine-Budde
- [PATCH v4 2/3] can: c_can: Add device tree support to Bosch C_CAN/D_CAN controller
Marc Kleine-Budde
- [PATCH 2/3] usb: otg: add device tree support to otg library
Marc Kleine-Budde
- [PATCH v6 1/3] USB: chipidea: add imx usbmisc support
Marc Kleine-Budde
- [PATCH] pinctrl: imx5: start numbering pad from 0
Uwe Kleine-König
- [PATCH] pinctrl: imx5: start numbering pad from 0
Uwe Kleine-König
- [PATCH v7 00/11] usb: musb: adding multi instance support
Koen Kooi
- [PATCH 3/4] arm/dts: omap5-evm: Add keypad data
Koen Kooi
- [PATCH v7 00/11] usb: musb: adding multi instance support
Koen Kooi
- [PATCH 3/4] arm/dts: omap5-evm: Add keypad data
Koen Kooi
- [PATCH V3 1/2] of: Add generic device tree DMA helpers
Vinod Koul
- [RFC][PATCH v3 1/3] runtime interpreted power sequences
Greg Kroah-Hartman
- [RFC][PATCH v3 1/3] runtime interpreted power sequences
Greg Kroah-Hartman
- [patch] driver-core: dev_to_node() should handle NULL pointers
Greg Kroah-Hartman
- [PATCH v2 1/2] powerpc/mpic: Add Open-PIC global timer document
Gala Kumar-B11780
- [PATCHv3 3/9] serial: vt8500: Add devicetree support for
Rob Landley
- [PATCH] ARM: EXYNOS: Add MFC device tree support
Karol Lewandowski
- [RFC] media DT bindings
Guennadi Liakhovetski
- [RFC] media DT bindings
Guennadi Liakhovetski
- [RFC v4] V4L DT bindings
Guennadi Liakhovetski
- V4L DT @ plumbers (was Re: [RFC v4] V4L DT bindings)
Guennadi Liakhovetski
- V4L DT @ plumbers (was Re: [RFC v4] V4L DT bindings)
Guennadi Liakhovetski
- Associating devices with multiple parents
Grant Likely
- [PATCH RESEND v2 1/2] arm/dts: Add AM33XX basic pinctrl support
Tony Lindgren
- [PATCH 1/2] arm/dts: Mark vcxio, v2v1 and v1v8 regulators as always on
Tony Lindgren
- OMAP: Configuring CONTROL_DEVCONF0 register via DT with pinctrl
Tony Lindgren
- OMAP: Configuring CONTROL_DEVCONF0 register via DT with pinctrl
Tony Lindgren
- [PATCH 07/11] ARM: OMAP/ASoC: Zoom2: Let the codec to handle the hs_extmute GPIO
Tony Lindgren
- [PATCH 2/4] ARM: OMAP: twl-common: Add helper function to register the omap-twl4030 audio driver
Tony Lindgren
- [PATCH 3/4] ARM: OMAP3: Switch to use the unified audio driver (omap-twl4030) for selected boards
Tony Lindgren
- [PATCH 0/4] ASoC/OMAP: ASoC machine driver for simple SoC with twl4030
Tony Lindgren
- [PATCH v3 1/9] ARM/ASoC: omap-mcbsp: Move OMAP2+ clock parenting code to ASoC driver
Tony Lindgren
- [PATCH v3 2/9] ARM: OMAP: mcbsp: Enable FIFO use for OMAP2430
Tony Lindgren
- [PATCH v3 3/9] ARM: OMAP: board-am3517evm: Configure McBSP1 CLKR/FSR signal source
Tony Lindgren
- [PATCH v3 4/9] ASoC: am3517evm: Do not configure McBSP1 CLKR/FSR signal muxing
Tony Lindgren
- [PATCH v3 5/9] ARM/ASoC: omap-mcbsp: Remove CLKR/FSR mux configuration code
Tony Lindgren
- [PATCH v3 8/9] ARM: OMAP2+: McBSP: Do not create legacy devices when booting with DT data
Tony Lindgren
- [PATCH v3 0/9] ARM/ASoC: OMAP McBSP device tree support
Tony Lindgren
- [PATCH v3 2/9] ARM: OMAP: mcbsp: Enable FIFO use for OMAP2430
Tony Lindgren
- [PATCH v3 2/9] ARM: OMAP: mcbsp: Enable FIFO use for OMAP2430
Tony Lindgren
- [PATCH v3 2/9] ARM: OMAP: mcbsp: Enable FIFO use for OMAP2430
Tony Lindgren
- [PATCH] arm/dts: omap5: Add mmc controller nodes and board data
Tony Lindgren
- [PATCH-V2] arm/dts: AM33XX: Set the default status of module to "disabled" state
Tony Lindgren
- [PATCH v3 3/4] arm/dts: AM33XX: Configure pinmuxs for D_CAN1 on AM335x-EVM
Tony Lindgren
- [PATCH 2/2] arm/dts: Cleanup regulator naming and remove @0,1..
Tony Lindgren
- [RFC RESEND 1/4] arm/dts: OMAP: Add timer nodes
Tony Lindgren
- [PATCH RESEND v4 1/3] arm/dts: AM33XX: Add basic pinctrl device tree data
Tony Lindgren
- [PATCH RESEND v4 2/3] arm/dts: AM33XX: Configure pinmuxs for user leds control on Bone
Tony Lindgren
- [PATCH v4 3/3] arm/dts: AM33XX: Add D_CAN device tree data
Tony Lindgren
- [PATCH 2/2] arm/dts: Cleanup regulator naming and remove @0,1..
Tony Lindgren
- [PATCH 1/2] net: davinci_mdio: enable and disable clock
Russell King - ARM Linux
- [PATCH v2] gpio: Add Avionic Design N-bit GPIO expander support
Russell King - ARM Linux
- [PATCH v2 1/9] ARM/ASoC: omap-mcbsp: Move OMAP2+ clock parenting code to ASoC driver
Russell King - ARM Linux
- [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup
Russell King - ARM Linux
- [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup
Russell King - ARM Linux
- [PATCH v2 dtc-1.3.0] dtc: Add --strip-disabled option to dtc(v2).
Jon Loeliger
- [PATCH] driver: misc: bmp085: remove "of_match_table" property.
Warner Losh
- [PATCH 05/14] ARM: at91: add pinctrl support
Warner Losh
- [PATCH 01/11] pinctrl: mvebu: pinctrl driver core
Andrew Lunn
- RFC: New release for DTC?
Yann E. MORIN
- [PATCH 1/2] net: davinci_mdio: enable and disable clock
Daniel Mack
- [PATCH 2/2] net: davinci_mdio: add DT bindings
Daniel Mack
- [PATCH 1/2] net: davinci_mdio: enable and disable clock
Daniel Mack
- [PATCH 1/2] net: davinci_mdio: enable and disable clock
Daniel Mack
- [PATCH v7 00/11] usb: musb: adding multi instance support
Daniel Mack
- am33xx: default to status = "disabled"?
Daniel Mack
- <Query> How to read arguments from a gpio handle
Daniel Mack
- [PATCH 1/2] net: davinci_mdio: enable and disable clock
Daniel Mack
- [PATCH v7 00/11] usb: musb: adding multi instance support
Daniel Mack
- [PATCH v7 00/11] usb: musb: adding multi instance support
Daniel Mack
- [PATCH v7 00/11] usb: musb: adding multi instance support
Daniel Mack
- [PATCH resend 2/2] SPI: spi-gpio: Add DT bindings
Daniel Mack
- [PATCH resend 1/2] SPI: spi-gpio: store chipselect information in private structure
Daniel Mack
- [PATCH v3 1/2] lis3: add generic DT matching code
Daniel Mack
- [PATCH v7 00/11] usb: musb: adding multi instance support
Daniel Mack
- [PATCH v3 1/2] lis3: add generic DT matching code
Daniel Mack
- [PATCH v3 1/2] lis3: add generic DT matching code
Daniel Mack
- [PATCH v3 1/2] lis3: add generic DT matching code
Daniel Mack
- [PATCH v3 1/2] lis3: add generic DT matching code
Daniel Mack
- [PATCH 0/2] Add device tree support for davinci_mdio driver and fix cpsw DT binding documentation
David Miller
- [PATCH 1/2] dt: introduce for_each_available_child_of_node, of_get_next_available_child
David Miller
- [PATCH 2/2] [v2] netdev/phy: skip disabled mdio-mux nodes
David Miller
- [PATCH] [v2] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped device
David Miller
- [PATCH 3.6.0-rc3 1/2] of/mdio: Add dummy functions in of_mdio.h.
David Miller
- [PATCH 3.6.0-rc3 2/2] of/mdio-gpio: Simplify the way device tree support is implemented.
David Miller
- [PATCH] [v3] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped device
David Miller
- [PATCH v3 2/2] ARM: EXYNOS: Add Gscaler device from DT
Sylwester Nawrocki
- [PATCH v3 2/2] ARM: EXYNOS: Add Gscaler device from DT
Sylwester Nawrocki
- [PATCH v3 2/2] ARM: EXYNOS: Add Gscaler device from DT
Sylwester Nawrocki
- [PATCH v3 2/2] ARM: EXYNOS: Add Gscaler device from DT
Sylwester Nawrocki
- [RFC v4] V4L DT bindings
Sylwester Nawrocki
- [PATCH 2/2] arm/dts: Cleanup regulator naming and remove @0,1..
Rajendra Nayak
- Can one set GPIO direction in pinmux definition?
Subodh Nijsure
- Can one set GPIO direction in pinmux definition?
Subodh Nijsure
- [PATCH v6] ARM: mtd: nand: davinci: add OF support for davinci nand controller
Sekhar Nori
- [PATCH v6 7/7] ARM: davinci: add support for the am1808 based enbw_cmc board
Sekhar Nori
- [PATCH v3 0/6] omap-am33xx rtc dt support
Sekhar Nori
- [PATCH 05/14] ARM: at91: add pinctrl support
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 5/6] ARM: integrator: convert AMBA devices to device tree
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 5/6] ARM: integrator: convert AMBA devices to device tree
Jean-Christophe PLAGNIOL-VILLARD
- [RFC PATCH] dtc: integrate gpp
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 05/14] ARM: at91: add pinctrl support
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH REPOST] dtc: integrate gpp
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH REPOST] dtc: integrate gpp
Jean-Christophe PLAGNIOL-VILLARD
- Device tree backporting for ARM on 2.6.32 kernel
Pankaj Pandey
- [PATCH 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
Kyungmin Park
- [PATCH 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
Kyungmin Park
- [RFC] media DT bindings
Laurent Pinchart
- [RFC/PATCH 02/13] media: s5p-csis: Add device tree support
Laurent Pinchart
- [RFC/PATCH 09/13] media: s5k6aa: Add support for device tree based instantiation
Laurent Pinchart
- [RFC] media DT bindings
Laurent Pinchart
- [RFC] media DT bindings
Laurent Pinchart
- [PATCH v2] of: Add videomode helper
Laurent Pinchart
- [PATCH v2] of: Add videomode helper
Laurent Pinchart
- V4L DT @ plumbers (was Re: [RFC v4] V4L DT bindings)
Laurent Pinchart
- [PATCH 0/6] Integrator devicetree support
Nicolas Pitre
- [PATCH 0/6] Integrator devicetree support
Nicolas Pitre
- [PATCH 1/2] ARM: split out ATAGS parsing
Nicolas Pitre
- [PATCH 2/2] ARM: allow for ATAGS to be configured out when DT support is selected
Nicolas Pitre
- [PATCH 0/8] *** ARM: Update arch-vt8500 to Devicetree ***
Tony Prisk
- [PATCH 1/8] arm: vt8500: Add device tree files for VIA/Wondermedia SoC's
Tony Prisk
- [PATCH 2/8] rtc: vt8500: Add devicetree support for vt8500-rtc
Tony Prisk
- [PATCH 3/8] serial: vt8500: Add devicetree support for vt8500-serial
Tony Prisk
- [PATCH 4/8] usb: vt8500: Add devicetree support for vt8500-ehci and -uhci.
Tony Prisk
- [PATCH 5/8] video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb
Tony Prisk
- [PATCH 6/8] arm: vt8500: Update arch-vt8500 to devicetree support.
Tony Prisk
- [PATCH 7/8] arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices
Tony Prisk
- [PATCH 8/8] ARM: vt8500: gpio: Devicetree support for arch-vt8500
Tony Prisk
- [PATCH 0/8] *** ARM: Update arch-vt8500 to Devicetree ***
Tony Prisk
- [PATCH 6/8] arm: vt8500: Update arch-vt8500 to devicetree support.
Tony Prisk
- [PATCH 5/8] video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb
Tony Prisk
- [rtc-linux] [PATCH 8/8] ARM: vt8500: gpio: Devicetree support for arch-vt8500
Tony Prisk
- [PATCH 1/8] arm: vt8500: Add device tree files for VIA/Wondermedia SoC's
Tony Prisk
- [PATCHv2 0/8] *** ARM: Update arch-vt8500 to Devicetree ***
Tony Prisk
- [PATCHv2 1/8] arm: vt8500: Add device tree files for VIA/Wondermedia SoC's
Tony Prisk
- [PATCHv2 2/8] rtc: vt8500: Add devicetree support for vt8500-rtc
Tony Prisk
- [PATCHv2 3/8] serial: vt8500: Add devicetree support for vt8500-serial
Tony Prisk
- [PATCHv2 4/8] usb: vt8500: Add devicetree support for vt8500-ehci and -uhci.
Tony Prisk
- [PATCHv2 5/8] video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb
Tony Prisk
- [PATCHv2 6/8] arm: vt8500: Update arch-vt8500 to devicetree support.
Tony Prisk
- [PATCHv2 7/8] arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices
Tony Prisk
- [PATCHv2 8/8] arm: vt8500: gpio: Devicetree support for arch-vt8500
Tony Prisk
- [PATCHv2 0/8] *** ARM: Update arch-vt8500 to Devicetree ***
Tony Prisk
- [PATCHv3 0/9] *** ARM: Update arch-vt8500 to Devicetree ***
Tony Prisk
- [PATCHv3 1/9] arm: vt8500: Add device tree files for VIA/Wondermedia SoC's
Tony Prisk
- [PATCHv3 2/9] rtc: vt8500: Add devicetree support for vt8500-rtc
Tony Prisk
- [PATCHv3 3/9] serial: vt8500: Add devicetree support for vt8500-serial
Tony Prisk
- [PATCHv3 4/9] usb: vt8500: Add devicetree support for vt8500-ehci and -uhci.
Tony Prisk
- [PATCHv3 5/9] video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb
Tony Prisk
- [PATCHv3 6/9] arm: vt8500: Update arch-vt8500 to devicetree support.
Tony Prisk
- [PATCHv3 7/9] arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices
Tony Prisk
- [PATCHv3 8/9] arm: vt8500: gpio: Devicetree support for arch-vt8500
Tony Prisk
- [PATCHv3 9/9] arm: vt8500: clk: Add Common Clock Framework support
Tony Prisk
- [PATCHv3 3/9] serial: vt8500: Add devicetree support for
Tony Prisk
- [rtc-linux] [PATCHv3 8/9] arm: vt8500: gpio: Devicetree support for arch-vt8500
Tony Prisk
- [PATCHv3 7/9] arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices
Tony Prisk
- [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***
Tony Prisk
- [PATCHv4 1/9] arm: vt8500: Add device tree files for VIA/Wondermedia SoC's
Tony Prisk
- [PATCHv4 2/9] rtc: vt8500: Add devicetree support for vt8500-rtc
Tony Prisk
- [PATCHv4 3/9] serial: vt8500: Add devicetree support for vt8500-serial
Tony Prisk
- [PATCHv4 4/9] usb: vt8500: Add devicetree support for vt8500-ehci and -uhci.
Tony Prisk
- [PATCHv4 5/9] video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb
Tony Prisk
- [PATCHv4 6/9] arm: vt8500: Update arch-vt8500 to devicetree support.
Tony Prisk
- [PATCHv4 7/9] arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices
Tony Prisk
- [PATCHv4 8/9] arm: vt8500: gpio: Devicetree support for arch-vt8500
Tony Prisk
- [PATCHv4 9/9] arm: vt8500: clk: Add Common Clock Framework support
Tony Prisk
- [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***
Tony Prisk
- [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***
Tony Prisk
- [PATCH 1/1] clk: add DT support for clock gating control
Tony Prisk
- [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***
Tony Prisk
- [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***
Tony Prisk
- [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***
Tony Prisk
- [RFC][PATCH v3 1/3] runtime interpreted power sequences
Thierry Reding
- [RFC][PATCH v3 1/3] runtime interpreted power sequences
Thierry Reding
- [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support
Thierry Reding
- [PATCH v3 09/10] of: Add of_pci_parse_ranges()
Thierry Reding
- [RFC][PATCH v3 1/3] runtime interpreted power sequences
Thierry Reding
- [RFC][PATCH v3 1/3] runtime interpreted power sequences
Thierry Reding
- [RFC][PATCH v3 1/3] runtime interpreted power sequences
Thierry Reding
- [RFC][PATCH v3 1/3] runtime interpreted power sequences
Thierry Reding
- [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support
Thierry Reding
- [PATCH v2] gpio: Add Avionic Design N-bit GPIO expander support
Thierry Reding
- [RFC][PATCH v3 1/3] runtime interpreted power sequences
Thierry Reding
- [RFC][PATCH v3 1/3] runtime interpreted power sequences
Thierry Reding
- [PATCH v2] gpio: Add Avionic Design N-bit GPIO expander support
Thierry Reding
- [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support
Thierry Reding
- [PATCH v2] gpio: Add Avionic Design N-bit GPIO expander support
Thierry Reding
- [PATCH v2] gpio: Add Avionic Design N-bit GPIO expander support
Thierry Reding
- [PATCH v2] gpio: Add Avionic Design N-bit GPIO expander support
Thierry Reding
- [PATCH v2] gpio: Add Avionic Design N-bit GPIO expander support
Thierry Reding
- [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support
Thierry Reding
- [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support
Thierry Reding
- [PATCH v3 01/10] PCI: Keep pci_fixup_irqs() around after init
Thierry Reding
- [PATCH v3 05/10] resource: add PCI configuration space support
Thierry Reding
- [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support
Thierry Reding
- [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support
Thierry Reding
- [PATCH v3 05/10] resource: add PCI configuration space support
Thierry Reding
- [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support
Thierry Reding
- [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support
Thierry Reding
- [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support
Thierry Reding
- [PATCH v3 05/10] resource: add PCI configuration space support
Thierry Reding
- [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support
Thierry Reding
- [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support
Thierry Reding
- [PATCH v3 01/10] PCI: Keep pci_fixup_irqs() around after init
Thierry Reding
- [PATCH v3 01/10] PCI: Keep pci_fixup_irqs() around after init
Thierry Reding
- [PATCH v3 08/10] of/address: Handle #address-cells > 2 specially
Thierry Reding
- [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support
Thierry Reding
- [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support
Thierry Reding
- [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support
Thierry Reding
- [PATCH v4 1/3] Runtime Interpreted Power Sequences
Thierry Reding
- [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support
Thierry Reding
- [PATCH v4 1/3] Runtime Interpreted Power Sequences
Thierry Reding
- [PATCH v4 1/3] Runtime Interpreted Power Sequences
Thierry Reding
- [PATCH v3 10/10] ARM: tegra: pcie: Add device tree support
Thierry Reding
- [PATCH v3 05/10] resource: add PCI configuration space support
Thierry Reding
- [PATCH v4 1/3] Runtime Interpreted Power Sequences
Thierry Reding
- [PATCH 1/2] mfd: dt: tps6586x: Add power off control
Thierry Reding
- [PATCH 2/2] mfd: dt: tps65910: add power off control
Thierry Reding
- [PATCH v2 1/2] mfd: dt: tps6586x: Add power off control
Thierry Reding
- [PATCH v4 1/3] Runtime Interpreted Power Sequences
Thierry Reding
- [PATCH v4 1/3] Runtime Interpreted Power Sequences
Thierry Reding
- [PATCH v4 1/3] Runtime Interpreted Power Sequences
Thierry Reding
- [PATCH v2] mtd: physmap_of: Add "no-unaligned-direct-access" DT property
Stefan Roese
- [PATCH v6] ARM: mtd: nand: davinci: add OF support for davinci nand controller
Heiko Schocher
- [PATCH v7] ARM: davinci: i2c: add OF support
Heiko Schocher
- [PATCH v6 7/7] ARM: davinci: add support for the am1808 based enbw_cmc board
Heiko Schocher
- [PATCH] pinctrl: imx5: start numbering pad from 0
Matt Sealey
- [PATCH] pinctrl: imx5: start numbering pad from 0
Matt Sealey
- [PATCH] pinctrl: imx5: start numbering pad from 0
Matt Sealey
- [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup
Matt Sealey
- [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup
Matt Sealey
- [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup
Matt Sealey
- [PATCH 2/2] ARM: imx6q: replace clk_register_clkdev with clock DT lookup
Matt Sealey
- Can one set GPIO direction in pinmux definition?
Matt Sealey
- [PATCH V3 1/2] drm/exynos: add platform_device_id table and driver data for exynos5 drm fimd
Joonyoung Shim
- [PATCH V3 2/2] video: drm: exynos: Add device tree support
Joonyoung Shim
- [PATCH 1/4] arm/dts: omap5-evm: Add I2C support
Sergei Shtylyov
- [PATCH v8 08/13] arm/dts: am33xx: Add dt data for usbss
Sergei Shtylyov
- [PATCH v3 06/25] docs: Xen ARM DT bindings
Stefano Stabellini
- DT GPIO numbering?
Johannes Stezenbach
- DT GPIO numbering?
Johannes Stezenbach
- DT GPIO numbering?
Johannes Stezenbach
- DT GPIO numbering?
Johannes Stezenbach
- [PATCH RESEND v4] spi/pl022: add devicetree support
Roland Stigge
- [PATCH RESEND v4] spi/pl022: add devicetree support
Roland Stigge
- [PATCH RESEND v4] spi/pl022: add devicetree support
Roland Stigge
- [PATCH v5 1/2] spi/pl022: Add chip select handling via GPIO
Roland Stigge
- [PATCH v5 1/2] spi/pl022: Add chip select handling via GPIO
Roland Stigge
- [PATCH v5 2/2] spi/pl022: Add devicetree support
Roland Stigge
- [PATCH v6 1/3] spi/pl022: Add chip select handling via GPIO
Roland Stigge
- [PATCH v6 2/3] spi/pl022: Add devicetree support
Roland Stigge
- [PATCH v6 3/3] DT bindings documentation: "num-cs" property for SPI controllers
Roland Stigge
- [PATCH 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
Heiko Stübner
- [PATCH 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
Heiko Stübner
- [PATCH v2 1/5] usb: phy: samsung: Introducing usb phy driver for hsotg
Heiko Stübner
- [PATCH] mmc: sdhci-s3c: Add device tree support
Heiko Stübner
- [PATCH] gpio: samsung: add devicetree init for s3c24xx arches
Heiko Stübner
- [PATCH] gpio: samsung: add devicetree init for s3c24xx arches
Heiko Stübner
- [PATCH] gpio: samsung: add devicetree init for s3c24xx arches
Heiko Stübner
- [PATCH] gpio: samsung: add devicetree init for s3c24xx arches
Heiko Stübner
- [PATCH v2] gpio: samsung: add devicetree init for s3c24xx arches
Heiko Stübner
- [PATCH v2] gpio: samsung: add devicetree init for s3c24xx arches
Heiko Stübner
- [PATCH] netdev/phy: skip disabled mdio-mux nodes
Timur Tabi
- Endianness of multi-bit 'gpios' property?
Timur Tabi
- [PATCH 1/2] dt: introduce for_each_available_child_of_node, of_get_next_available_child
Timur Tabi
- [PATCH 2/2] [v2] netdev/phy: skip disabled mdio-mux nodes
Timur Tabi
- [RFC:PATCH dtc-1.3.0] dtc: Add --strip-disabled option to dtc.
Timur Tabi
- [RFC:PATCH dtc-1.3.0] dtc: Add --strip-disabled option to dtc.
Timur Tabi
- [PATCH v2 dtc-1.3.0] dtc: Add --strip-disabled option to dtc(v2).
Timur Tabi
- [PATCH] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped FPGA
Timur Tabi
- [PATCH] [v2] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped device
Timur Tabi
- [PATCH] [v2] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped device
Timur Tabi
- [PATCH] [v2] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped device
Timur Tabi
- [PATCH] [v3] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped device
Timur Tabi
- [PATCH] [v3] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped device
Timur Tabi
- [RFC:PATCH 3.6.0-rc1] dtc: Add -P option to dtc for Pre-Processing.
Tabi Timur-B04825
- [RFC:PATCH 3.6.0-rc1] dtc: Add -P option to dtc for Pre-Processing.
Tabi Timur-B04825
- [RFC:PATCH dtc-1.3.0] dtc: Add --strip-disabled option to dtc.
Tabi Timur-B04825
- [RFC:PATCH dtc-1.3.0] dtc: Add --strip-disabled option to dtc.
Tabi Timur-B04825
- [RFC:PATCH dtc-1.3.0] dtc: Add --strip-disabled option to dtc.
Tabi Timur-B04825
- [PATCH] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped FPGA
Tabi Timur-B04825
- [PATCH] [v2] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped device
Tabi Timur-B04825
- dynamic device tree char driver
Alan Tull
- [PATCH 1/1] dynamic device tree char driver
Alan Tull
- dynamic device tree char driver
Alan Tull
- dynamic device tree char driver
Alan Tull
- [PATCH 1/1] clk: add DT support for clock gating control
Mike Turquette
- [PATCH 00/11] ARM/ASoC: OMAP McBSP device tree support
Peter Ujfalusi
- [PATCH 01/11] ARM/ASoC: omap-mcbsp: Move OMAP2+ clock parenting code to ASoC driver
Peter Ujfalusi
- [PATCH 02/11] ARM: OMAP2+: McBSP: Do not create legacy devices when booting with DT data
Peter Ujfalusi
- [PATCH 03/11] ARM: OMAP: mcbsp: Enable FIFO use for OMAP2430
Peter Ujfalusi
- [PATCH 04/11] ARM: OMAP: board-am3517evm: Configure McBSP1 CLKR/FSR signal source
Peter Ujfalusi
- [PATCH 05/11] ASoC: am3517evm: Do not configure McBSP1 CLKR/FSR signal muxing
Peter Ujfalusi
- [PATCH 06/11] ARM/ASoC: omap-mcbsp: Remove CLKR/FSR mux configuration code
Peter Ujfalusi
- [PATCH 07/11] ASoC: omap-mcbsp: Sidetone: Use SIDLE bits in SYSCONFIG register to select noidle mode
Peter Ujfalusi
- [PATCH 08/11] ARM: OMAP3: Remove callback for McBSP sidetone ICLK workaround
Peter Ujfalusi
- [PATCH 09/11] ASoC: omap-mcbsp: Remove unused defines
Peter Ujfalusi
- [PATCH 10/11] ASoC: omap-mcbsp: Remove cpu_is_omap* checks from the code
Peter Ujfalusi
- [PATCH 11/11] ASoC: omap-mcbsp: Add device tree bindings
Peter Ujfalusi
- [PATCH 00/11] MFD/ASoC/Input: twl4030-audio submodule DT support
Peter Ujfalusi
- [PATCH 01/11] MFD: twl4030-audio: Clean up MODULE_* and platform_driver part
Peter Ujfalusi
- [PATCH 02/11] MFD: twl4030-audio: Convert to use devm_kzalloc
Peter Ujfalusi
- [PATCH 03/11] MFD: twl4030-audio: Rearange and clean-up the probe function
Peter Ujfalusi
- [PATCH 04/11] MFD: twl4030-audio: Add DT support
Peter Ujfalusi
- [PATCH 05/11] Input: twl4030-vibra: Support for DT booted kernel
Peter Ujfalusi
- [PATCH 06/11] ASoC: twl4030: Move hs_extmute GPIO handling to driver
Peter Ujfalusi
- [PATCH 07/11] ARM: OMAP/ASoC: Zoom2: Let the codec to handle the hs_extmute GPIO
Peter Ujfalusi
- [PATCH 08/11] ASoC/MFD: twl4030: Remove set_hs_extmute callback from platform data
Peter Ujfalusi
- [PATCH 09/11] ASoC: twl4030: Convert to use devm_kzalloc
Peter Ujfalusi
- [PATCH 10/11] ASoC: twl4030: Add pointer to pdata within the private data
Peter Ujfalusi
- [PATCH 11/11] ASoC: twl4030: Support for DT booted kernel
Peter Ujfalusi
- [PATCH 0/4] ASoC/OMAP: ASoC machine driver for simple SoC with twl4030
Peter Ujfalusi
- [PATCH 1/4] ASoC: omap-twl4030: Simple machine driver for TI SoC with twl4030 codec
Peter Ujfalusi
- [PATCH 2/4] ARM: OMAP: twl-common: Add helper function to register the omap-twl4030 audio driver
Peter Ujfalusi
- [PATCH 3/4] ARM: OMAP3: Switch to use the unified audio driver (omap-twl4030) for selected boards
Peter Ujfalusi
- [PATCH 4/4] ASoC: Remove obsolete OMAP3 machine drivers
Peter Ujfalusi
- OMAP: Configuring CONTROL_DEVCONF0 register via DT with pinctrl
Peter Ujfalusi
- [PATCH RESEND v2 1/2] arm/dts: Add AM33XX basic pinctrl support
Peter Ujfalusi
- [PATCH 3/4] ARM: OMAP3: Switch to use the unified audio driver (omap-twl4030) for selected boards
Peter Ujfalusi
- [PATCH 04/11] MFD: twl4030-audio: Add DT support
Peter Ujfalusi
- [PATCH 04/11] MFD: twl4030-audio: Add DT support
Peter Ujfalusi
- [alsa-devel] [PATCH 08/11] ARM: OMAP3: Remove callback for McBSP sidetone ICLK workaround
Peter Ujfalusi
- [PATCH 04/11] MFD: twl4030-audio: Add DT support
Peter Ujfalusi
- [PATCH 04/11] MFD: twl4030-audio: Add DT support
Peter Ujfalusi
- [PATCH 04/11] MFD: twl4030-audio: Add DT support
Peter Ujfalusi
- [alsa-devel] [PATCH 07/11] ASoC: omap-mcbsp: Sidetone: Use SIDLE bits in SYSCONFIG register to select noidle mode
Peter Ujfalusi
- [PATCH 04/11] MFD: twl4030-audio: Add DT support
Peter Ujfalusi
- [PATCH 3/4] ARM: OMAP3: Switch to use the unified audio driver (omap-twl4030) for selected boards
Peter Ujfalusi
- [PATCH 2/3] mfd: twl6040: Add twl6040-gpio child
Peter Ujfalusi
- [PATCH 04/11] MFD: twl4030-audio: Add DT support
Peter Ujfalusi
- [alsa-devel] [PATCH 08/11] ARM: OMAP3: Remove callback for McBSP sidetone ICLK workaround
Peter Ujfalusi
- [PATCH v2 0/9] ARM/ASoC: OMAP McBSP device tree support
Peter Ujfalusi
- [PATCH v2 1/9] ARM/ASoC: omap-mcbsp: Move OMAP2+ clock parenting code to ASoC driver
Peter Ujfalusi
- [PATCH v2 2/9] ARM: OMAP: mcbsp: Enable FIFO use for OMAP2430
Peter Ujfalusi
- [PATCH v2 3/9] ARM: OMAP: board-am3517evm: Configure McBSP1 CLKR/FSR signal source
Peter Ujfalusi
- [PATCH v2 4/9] ASoC: am3517evm: Do not configure McBSP1 CLKR/FSR signal muxing
Peter Ujfalusi
- [PATCH v2 5/9] ARM/ASoC: omap-mcbsp: Remove CLKR/FSR mux configuration code
Peter Ujfalusi
- [PATCH v2 6/9] ASoC: omap-mcbsp: Remove unused defines
Peter Ujfalusi
- [PATCH v2 7/9] ASoC: omap-mcbsp: Remove cpu_is_omap* checks from the code
Peter Ujfalusi
- [PATCH v2 8/9] ARM: OMAP2+: McBSP: Do not create legacy devices when booting with DT data
Peter Ujfalusi
- [PATCH v2 9/9] ASoC: omap-mcbsp: Add device tree bindings
Peter Ujfalusi
- [PATCH v2 1/9] ARM/ASoC: omap-mcbsp: Move OMAP2+ clock parenting code to ASoC driver
Peter Ujfalusi
- [PATCH v2 0/4] ASoC machine driver for simple SoC with twl4030
Peter Ujfalusi
- [PATCH v2 1/4] ASoC: omap-twl4030: Simple machine driver for TI SoC with twl4030 codec
Peter Ujfalusi
- [PATCH v2 2/4] ARM: OMAP: twl-common: Add helper function to register the omap-twl4030 audio driver
Peter Ujfalusi
- [PATCH v2 3/4] ARM: OMAP3: Switch to use the unified audio driver (omap-twl4030) for selected boards
Peter Ujfalusi
- [PATCH v2 4/4] ASoC: Remove obsolete OMAP3 machine drivers
Peter Ujfalusi
- [PATCH v2 00/14] MFD/ASoC/Input: twl4030-audio submodule DT support
Peter Ujfalusi
- [PATCH v2 01/14] MFD: twl4030-audio: Clean up MODULE_* and platform_driver part
Peter Ujfalusi
- [PATCH v2 02/14] MFD: twl4030-audio: Convert to use devm_kzalloc
Peter Ujfalusi
- [PATCH v2 03/14] MFD: twl4030-audio: Rearange and clean-up the probe function
Peter Ujfalusi
- [PATCH v2 04/14] MFD: twl-core: Add API to query the HFCLK rate
Peter Ujfalusi
- [PATCH v2 05/14] MFD: twl4030-audio: Get audio MCLK via twl-core API instead of pdata
Peter Ujfalusi
- [PATCH v2 06/14] dt: Add empty of_find_node_by_name() function
Peter Ujfalusi
- [PATCH v2 07/14] MFD: twl4030-audio: Add DT support
Peter Ujfalusi
- [PATCH v2 08/14] Input: twl4030-vibra: Support for DT booted kernel
Peter Ujfalusi
- [PATCH v2 09/14] ASoC: twl4030: Move hs_extmute GPIO handling to driver
Peter Ujfalusi
- [PATCH v2 10/14] ARM: OMAP/ASoC: Zoom2: Let the codec to handle the hs_extmute GPIO
Peter Ujfalusi
- [PATCH v2 11/14] ASoC/MFD: twl4030: Remove set_hs_extmute callback from platform data
Peter Ujfalusi
- [PATCH v2 12/14] ASoC: twl4030: Convert to use devm_kzalloc
Peter Ujfalusi
- [PATCH v2 13/14] ASoC: twl4030: Add pointer to pdata within the private data
Peter Ujfalusi
- [PATCH v2 14/14] ASoC: twl4030: Support for DT booted kernel
Peter Ujfalusi
- [PATCH v2 0/3] MFD/GPIO: Add twl6040 GPO driver
Peter Ujfalusi
- [PATCH v2 1/3] mfd: twl6040: Fix GPO mask
Peter Ujfalusi
- [PATCH v2 2/3] mfd: twl6040: Add twl6040-gpio child
Peter Ujfalusi
- [PATCH v2 3/3] gpio: Add basic support for TWL6040 GPOs
Peter Ujfalusi
- [PATCH v3 0/9] ARM/ASoC: OMAP McBSP device tree support
Peter Ujfalusi
- [PATCH v3 1/9] ARM/ASoC: omap-mcbsp: Move OMAP2+ clock parenting code to ASoC driver
Peter Ujfalusi
- [PATCH v3 2/9] ARM: OMAP: mcbsp: Enable FIFO use for OMAP2430
Peter Ujfalusi
- [PATCH v3 3/9] ARM: OMAP: board-am3517evm: Configure McBSP1 CLKR/FSR signal source
Peter Ujfalusi
- [PATCH v3 4/9] ASoC: am3517evm: Do not configure McBSP1 CLKR/FSR signal muxing
Peter Ujfalusi
- [PATCH v3 5/9] ARM/ASoC: omap-mcbsp: Remove CLKR/FSR mux configuration code
Peter Ujfalusi
- [PATCH v3 6/9] ASoC: omap-mcbsp: Remove unused defines
Peter Ujfalusi
- [PATCH v3 7/9] ASoC: omap-mcbsp: Remove cpu_is_omap* checks from the code
Peter Ujfalusi
- [PATCH v3 8/9] ARM: OMAP2+: McBSP: Do not create legacy devices when booting with DT data
Peter Ujfalusi
- [PATCH v3 9/9] ASoC: omap-mcbsp: Add device tree bindings
Peter Ujfalusi
- [PATCH v3 2/9] ARM: OMAP: mcbsp: Enable FIFO use for OMAP2430
Peter Ujfalusi
- [PATCH v3 2/9] ARM: OMAP: mcbsp: Enable FIFO use for OMAP2430
Ujfalusi, Peter
- [PATCH] ASoC: omap-mcbsp: Device tree binding documentation update
Peter Ujfalusi
- [PATCH v3 5/9] ARM/ASoC: omap-mcbsp: Remove CLKR/FSR mux configuration code
Peter Ujfalusi
- [PATCH 0/6] ARM/dts: omap McBSP and audio support for BeagleBoard
Peter Ujfalusi
- [PATCH 1/6] ARM/dts: OMAP2: Add McBSP entries for OMAP2420 and OMAP2430 SoC
Peter Ujfalusi
- [PATCH 2/6] ARM/dts: omap2420-h4: Include omap2420.dtsi file instead the common omap2
Peter Ujfalusi
- [PATCH 3/6] ARM/dts: OMAP3: Add McBSP entries
Peter Ujfalusi
- [PATCH 4/6] ARM/dts: OMAP4: Add McBSP entries
Peter Ujfalusi
- [PATCH 5/6] ARM/dts: OMAP5: Add McBSP entries
Peter Ujfalusi
- [PATCH 6/6] ARM/dts: omap3-beagle: Enable audio support
Peter Ujfalusi
- [PATCH v2 0/8] ARM/dts: OMAP audio related updates for OMAP2/3/4/5
Peter Ujfalusi
- [PATCH v2 1/8] ARM/dts: OMAP2: Add McBSP entries for OMAP2420 and OMAP2430 SoC
Peter Ujfalusi
- [PATCH v2 2/8] ARM/dts: omap2420-h4: Include omap2420.dtsi file instead the common omap2
Peter Ujfalusi
- [PATCH v2 3/8] ARM/dts: OMAP3: Add McBSP entries
Peter Ujfalusi
- [PATCH v2 4/8] ARM/dts: OMAP4: Add McBSP entries
Peter Ujfalusi
- [PATCH v2 5/8] ARM/dts: OMAP5: Add McBSP entries
Peter Ujfalusi
- [PATCH v2 6/8] ARM/dts: omap3-beagle: Enable audio support
Peter Ujfalusi
- [PATCH v2 7/8] ARM/dts: omap4: Add reg-names for McPDM and DMIC
Peter Ujfalusi
- [PATCH v2 8/8] ARM/dts: omap5: Add McPDM and DMIC section to the dtsi file
Peter Ujfalusi
- [PATCH v2 0/3] MFD/GPIO: Add twl6040 GPO driver
Peter Ujfalusi
- [PATCH v2 02/14] MFD: twl4030-audio: Convert to use devm_kzalloc
Peter Ujfalusi
- [PATCH v4 1/3] Runtime Interpreted Power Sequences
Tomi Valkeinen
- [PATCH v4 1/3] Runtime Interpreted Power Sequences
Tomi Valkeinen
- [PATCH v4 1/3] Runtime Interpreted Power Sequences
Tomi Valkeinen
- [PATCH v4 1/3] Runtime Interpreted Power Sequences
Tomi Valkeinen
- [PATCH V4] mtd: m25p80: Make fast read configurable via DT
Marek Vasut
- [PATCH V4] mtd: m25p80: Make fast read configurable via DT
Marek Vasut
- [PATCH V5] mtd: m25p80: Make fast read configurable via DT
Marek Vasut
- [PATCH V5] mtd: m25p80: Make fast read configurable via DT
Marek Vasut
- [PATCH V5] mtd: m25p80: Make fast read configurable via DT
Marek Vasut
- Gethering power management/policy hw drivers under drivers/power/? (Re: [RFC][PATCH v3 1/3] runtime interpreted power sequences)
Anton Vorontsov
- [PATCH V1 1/3] GPIO: PCA953X: Increase size of invert variable to support 24 bit
Linus Walleij
- [PATCH V1 0/3] Extend TCA6424 support
Linus Walleij
- [PATCH resend 2/2] SPI: spi-gpio: Add DT bindings
Linus Walleij
- DT GPIO numbering?
Linus Walleij
- [PATCH v2] gpio: Add Avionic Design N-bit GPIO expander support
Linus Walleij
- [PATCH resend 2/2] SPI: spi-gpio: Add DT bindings
Linus Walleij
- DT GPIO numbering?
Linus Walleij
- [PATCH v2] gpio: Add Avionic Design N-bit GPIO expander support
Linus Walleij
- [rtc-linux] [PATCH 8/8] ARM: vt8500: gpio: Devicetree support for arch-vt8500
Linus Walleij
- [rtc-linux] [PATCH 8/8] ARM: vt8500: gpio: Devicetree support for arch-vt8500
Linus Walleij
- [PATCH v2] gpio: Add Avionic Design N-bit GPIO expander support
Linus Walleij
- [PATCH v2] gpio: Add Avionic Design N-bit GPIO expander support
Linus Walleij
- [PATCH 1/8] of/irq: Create stub for of_irq_find_parent when !CONFIG_OF
Linus Walleij
- DT GPIO numbering?
Linus Walleij
- [PATCH 05/14] ARM: at91: add pinctrl support
Linus Walleij
- [PATCH 0/6] Integrator devicetree support
Linus Walleij
- [PATCH 1/6] ARM: integrator: call common init function from machine
Linus Walleij
- [PATCH 2/6] ARM: integrator: check PL010 device name rather than base address
Linus Walleij
- [PATCH 3/6] ARM: plat-versatile: add DT support to FPGA IRQ controller
Linus Walleij
- [PATCH 4/6] ARM: integrator: initial device tree support
Linus Walleij
- [PATCH 5/6] ARM: integrator: convert AMBA devices to device tree
Linus Walleij
- [PATCH 6/6] ARM: integrator: convert platform devices to Device Tree
Linus Walleij
- [PATCH 3/6] OF: pinctrl: MIPS: lantiq: adds support for FALCON SoC
Linus Walleij
- [PATCH 5/6] ARM: integrator: convert AMBA devices to device tree
Linus Walleij
- [PATCH 0/6] Integrator devicetree support
Linus Walleij
- [PATCH 00/11] pinctrl: mvebu: pinctrl driver
Linus Walleij
- [PATCH 01/11] pinctrl: mvebu: pinctrl driver core
Linus Walleij
- [PATCH 02/11] pinctrl: mvebu: dove pinctrl driver
Linus Walleij
- [PATCH 03/11] pinctrl: mvebu: kirkwood pinctrl driver
Linus Walleij
- [PATCH 01/11] pinctrl: mvebu: pinctrl driver core
Linus Walleij
- [PATCH 01/11] pinctrl: mvebu: pinctrl driver core
Linus Walleij
- [PATCH 04/11] pinctrl: mvebu: add pinctrl driver for Armada 370
Linus Walleij
- [PATCH 05/11] pinctrl: mvebu: add pinctrl driver for Armada XP
Linus Walleij
- [PATCH 06/11] ARM: mvebu: add pinctrl device in DT for Armada 370/XP SoCs
Linus Walleij
- [PATCH 07/11] ARM: mvebu: Add pinctrl support to Armada XP SoCs
Linus Walleij
- [PATCH 08/11] ARM: mvebu: Add pinctrl support to Armada 370 SoC
Linus Walleij
- [PATCH 09/11] ARM: mvebu: adjust Armada XP evaluation board DTS
Linus Walleij
- [PATCH 10/11] arm: mvebu: enable PINCTRL usage
Linus Walleij
- [PATCH 11/11] arm: mvebu: add pinctrl support in defconfig
Linus Walleij
- [PATCH RESEND v4] spi/pl022: add devicetree support
Linus Walleij
- [PATCH RESEND v4] spi/pl022: add devicetree support
Linus Walleij
- [PATCH] pinctrl: imx5: start numbering pad from 0
Linus Walleij
- [PATCH] pinctrl: imx5: start numbering pad from 0
Linus Walleij
- [PATCH v2] serial: pl011: honour serial aliases in device tree
Linus Walleij
- [rtc-linux] [PATCHv3 8/9] arm: vt8500: gpio: Devicetree support for arch-vt8500
Linus Walleij
- [PATCH v5 1/2] spi/pl022: Add chip select handling via GPIO
Linus Walleij
- [PATCH v5 2/2] spi/pl022: Add devicetree support
Linus Walleij
- [PATCH v6 1/3] spi/pl022: Add chip select handling via GPIO
Linus Walleij
- [PATCH v6 2/3] spi/pl022: Add devicetree support
Linus Walleij
- [PATCH v6 3/3] DT bindings documentation: "num-cs" property for SPI controllers
Linus Walleij
- [rtc-linux] [PATCHv4 8/9] arm: vt8500: gpio: Devicetree support for arch-vt8500
Linus Walleij
- [rtc-linux] RE: [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***
Linus Walleij
- [PATCH 05/14] ARM: at91: add pinctrl support
Linus Walleij
- [PATCH 5/6] ARM: integrator: convert AMBA devices to device tree
Linus Walleij
- [PATCH 1/2] net: davinci_mdio: enable and disable clock
Paul Walmsley
- [PATCH] ARM: AM33XX: clock: Add dcan clock aliases for device-tree
Paul Walmsley
- [PATCH] ARM: AM33XX: clock: Add dcan clock aliases for device-tree
Paul Walmsley
- [PATCH v3 06/18] tegra: fdt: Add LCD definitions for Tegra
Stephen Warren
- [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support
Stephen Warren
- [RFC][PATCH v3 1/3] runtime interpreted power sequences
Stephen Warren
- [PATCH v2] gpio: Add Avionic Design N-bit GPIO expander support
Stephen Warren
- [RFC] media DT bindings
Stephen Warren
- [RFC] media DT bindings
Stephen Warren
- [PATCH v3 09/10] of: Add of_pci_parse_ranges()
Stephen Warren
- [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support
Stephen Warren
- [PATCH] of: Allow busses with #size-cells=0
Stephen Warren
- [PATCH] mfd: add MAX8907 core driver
Stephen Warren
- [PATCH] of: Allow busses with #size-cells=0
Stephen Warren
- [PATCH] regulator: tps6586x: add support for SYS rail
Stephen Warren
- [PATCH] mfd: add MAX8907 core driver
Stephen Warren
- [PATCH v2] of: Add videomode helper
Stephen Warren
- [PATCH v2] of: Add videomode helper
Stephen Warren
- <Query> How to read arguments from a gpio handle
Stephen Warren
- [PATCH V2] regulator: tps6586x: add support for SYS rail
Stephen Warren
- <Query> How to read arguments from a gpio handle
Stephen Warren
- [PATCH v2] of: Add videomode helper
Stephen Warren
- DT GPIO numbering?
Stephen Warren
- [RFC][PATCH v3 1/3] runtime interpreted power sequences
Stephen Warren
- [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support
Stephen Warren
- [PATCH V3] dtc: Add ability to delete nodes and properties
Stephen Warren
- <Query> Reg: Adding a gpio initialization sequence in dts is valid or not
Stephen Warren
- [PATCH 8/8] ARM: vt8500: gpio: Devicetree support for arch-vt8500
Stephen Warren
- [PATCH 1/8] arm: vt8500: Add device tree files for VIA/Wondermedia SoC's
Stephen Warren
- [PATCH 5/8] video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb
Stephen Warren
- [PATCH 6/8] arm: vt8500: Update arch-vt8500 to devicetree support.
Stephen Warren
- [PATCH V3] regulator: tps6586x: add support for SYS rail
Stephen Warren
- [PATCH V3] regulator: tps6586x: add support for SYS rail
Stephen Warren
- [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support
Stephen Warren
- [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support
Stephen Warren
- [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support
Stephen Warren
- [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support
Stephen Warren
- [PATCH] pinctrl: imx5: start numbering pad from 0
Stephen Warren
- [PATCH V4] mfd: add MAX8907 core driver
Stephen Warren
- [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support
Stephen Warren
- [PATCH 5/8] video: vt8500: Add devicetree support for vt8500-fb and wm8505-fb
Stephen Warren
- [PATCHv2 0/8] *** ARM: Update arch-vt8500 to Devicetree ***
Stephen Warren
- [PATCH v3 00/10] ARM: tegra: Add PCIe device tree support
Stephen Warren
- [PATCH v3 05/10] resource: add PCI configuration space support
Stephen Warren
- [PATCH v4 1/3] Runtime Interpreted Power Sequences
Stephen Warren
- [PATCH v4 2/3] pwm_backlight: use power sequences
Stephen Warren
- [PATCH v4 3/3] tegra: add pwm backlight device tree nodes
Stephen Warren
- [PATCH v4 1/3] Runtime Interpreted Power Sequences
Stephen Warren
- Device tree node names
Stephen Warren
- [PATCH v4 1/3] Runtime Interpreted Power Sequences
Stephen Warren
- [PATCH] pinctrl: imx5: start numbering pad from 0
Stephen Warren
- <Query> Reg: Adding a gpio initialization sequence in dts is valid or not
Stephen Warren
- [PATCH 1/2] mfd: dt: tps6586x: Add power off control
Stephen Warren
- [PATCH 2/2] mfd: dt: tps65910: add power off control
Stephen Warren
- [PATCH REPOST] dtc: integrate gpp
Stephen Warren
- [PATCH V3] dtc: Add ability to delete nodes and properties
Stephen Warren
- [PATCH] mmc: dt: Add 'broken-cd' DT binding
Stephen Warren
- Device tree node names
Stephen Warren
- [PATCH 05/14] ARM: at91: add pinctrl support
Stephen Warren
- Can one set GPIO direction in pinmux definition?
Stephen Warren
- [PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core
Stephen Warren
- [PATCH v2 7/9] ARM: mvebu: Add pinctrl support to Armada XP SoCs
Stephen Warren
- [PATCH v2 8/9] ARM: mvebu: Add pinctrl support to Armada 370 SoC
Stephen Warren
- [PATCHv3 7/9] arm: vt8500: doc: Add device tree bindings for arch-vt8500 devices
Stephen Warren
- Can one set GPIO direction in pinmux definition?
Stephen Warren
- [PATCH 1/7] mfd: add imx syscon driver based on regmap
Stephen Warren
- [PATCH 4/7] regulator: anatop-regulator: convert to use imx-syscon to access anatop register
Stephen Warren
- [PATCH 05/14] ARM: at91: add pinctrl support
Stephen Warren
- [PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core
Stephen Warren
- [PATCH 4/7] regulator: anatop-regulator: convert to use imx-syscon to access anatop register
Stephen Warren
- [PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core
Stephen Warren
- [PATCH] [v2] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped device
Stephen Warren
- [PATCH v3 1/4] pinctrl: add samsung pinctrl and gpiolib driver
Stephen Warren
- [PATCH] [v2] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped device
Stephen Warren
- [PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core
Stephen Warren
- [PATCH] [v2] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped device
Stephen Warren
- [PATCH] [v2] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped device
Stephen Warren
- [PATCH] [v3] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped device
Stephen Warren
- [PATCH] [v3] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped device
Stephen Warren
- [PATCH V4] mfd: add MAX8907 core driver
Stephen Warren
- [PATCHv4 0/9] *** ARM: Update arch-vt8500 to Devicetree ***
Stephen Warren
- [PATCH v2 1/2] mfd: dt: tps6586x: Add power off control
Stephen Warren
- [PATCH REPOST] dtc: integrate gpp
Stephen Warren
- [PATCH v2 1/9] pinctrl: mvebu: pinctrl driver core
Stephen Warren
- [PATCH 03/11] pinctrl: mvebu: kirkwood pinctrl driver
Stephen Warren
- [PATCH v3 1/7] mfd: add syscon driver based on regmap
Stephen Warren
- [PATCH v2 1/2] powerpc/mpic: Add Open-PIC global timer document
Scott Wood
- [PATCH v2 2/2] powerpc/mpic: add global timer support
Scott Wood
- [PATCH v2 1/2] powerpc/mpic: Add Open-PIC global timer document
Scott Wood
- [PATCH v2 1/2] powerpc/mpic: Add Open-PIC global timer document
Scott Wood
- [RFC:PATCH dtc-1.3.0] dtc: Add --strip-disabled option to dtc.
Scott Wood
- [RFC:PATCH dtc-1.3.0] dtc: Add --strip-disabled option to dtc.
Scott Wood
- [PATCH] [v2] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped device
Scott Wood
- [PATCH] [v2] netdev/phy: add MDIO bus multiplexer driven by a memory-mapped device
Scott Wood
- [PATCH v3 2/3] PM / OPP: Initialize OPP table from device tree
Rafael J. Wysocki
- [PATCH v4 0/3] Runtime Interpreted Power Sequences
Rafael J. Wysocki
- [PATCH v2 2/2] powerpc/mpic: add global timer support
Li Yang-R58472
- [PATCH 1/7] mfd: add imx syscon driver based on regmap
Richard Zhao
- [PATCH 6/7] ARM: dts: imx6q: add simple-bus compatible string for anatop
Richard Zhao
- [PATCH 1/7] mfd: add imx syscon driver based on regmap
Richard Zhao
- [PATCH 4/7] regulator: anatop-regulator: convert to use imx-syscon to access anatop register
Richard Zhao
- [PATCH v2 5/7] ARM: imx6q: convert to use syscon to access anatop registers
Richard Zhao
- [PATCH v6 1/3] USB: chipidea: add imx usbmisc support
Richard Zhao
- [PATCH v6 1/3] USB: chipidea: add imx usbmisc support
Richard Zhao
- [PATCH v6 1/3] USB: chipidea: add imx usbmisc support
Richard Zhao
- [PATCH 0/8] i2c: at91: cleanup and dt support
ludovic.desroches at atmel.com
- [PATCH 1/8] i2c: at91: use managed resources
ludovic.desroches at atmel.com
- [PATCH 2/8] i2c: at91: add warning about transmission issues for some devices
ludovic.desroches at atmel.com
- [PATCH 3/8] i2c: at91: use an id table for SoC dependent parameters
ludovic.desroches at atmel.com
- [PATCH 4/8] ARM: at91: do not configure at91sam9g10 twi pio as open-drain
ludovic.desroches at atmel.com
- [PATCH 4/8] ARM: at91: do not configure at91sam9g10 twi pio as open-drain
ludovic.desroches at atmel.com
- [PATCH 5/8] i2c: at91: add dt support to i2c-at91
ludovic.desroches at atmel.com
- [PATCH 6/8] ARM: at91: add clocks for I2C DT entries
ludovic.desroches at atmel.com
- [PATCH 7/8] ARM: dts: add twi nodes for atmel SOCs
ludovic.desroches at atmel.com
- [PATCH 8/8] ARM: dts: add twi nodes for atmel boards
ludovic.desroches at atmel.com
- [PATCH v2 1/2] powerpc/mpic: Add Open-PIC global timer document
Dongsheng.wang at freescale.com
- [PATCH] powerpc/8544ds: add partition table for norflash
Dongsheng.wang at freescale.com
Last message date:
Fri Aug 31 23:21:04 EST 2012
Archived on: Sat Sep 1 05:42:58 EST 2012
This archive was generated by
Pipermail 0.09 (Mailman edition).