[PATCH v3 1/2] drivers: bus: add a new driver for omap-ocp2scp

Felipe Balbi balbi at ti.com
Mon Aug 6 21:50:20 EST 2012


On Mon, Aug 06, 2012 at 04:55:30PM +0530, Kishon Vijay Abraham I wrote:
> Adds a new driver *omap-ocp2scp*. This driver takes the responsibility of
> creating all the devices that is connected to OCP2SCP. In the case of OMAP4,
> USB2PHY is connected to ocp2scp.
> 
> This also includes device tree support for ocp2scp driver and
> the documentation with device tree binding information is updated.
> 
> Acked-by: Felipe Balbi <balbi at ti.com>
> Acked-by: Arnd Bergmann <arnd at arndb.de>
> Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
> ---
>  .../devicetree/bindings/bus/omap-ocp2scp.txt       |   10 +++
>  drivers/Kconfig                                    |    2 +
>  drivers/Makefile                                   |    2 +
>  drivers/bus/Kconfig                                |   15 ++++
>  drivers/bus/Makefile                               |    5 ++
>  drivers/bus/omap-ocp2scp.c                         |   88 ++++++++++++++++++++
>  6 files changed, 122 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
>  create mode 100644 drivers/bus/Kconfig
>  create mode 100644 drivers/bus/Makefile
>  create mode 100644 drivers/bus/omap-ocp2scp.c
> 
> diff --git a/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
> new file mode 100644
> index 0000000..d2fe064
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
> @@ -0,0 +1,10 @@
> +* OMAP OCP2SCP - ocp interface to scp interface
> +
> +properties:
> +- compatible : Should be "ti,omap-ocp2scp"
> +- #address-cells, #size-cells : Must be present if the device has sub-nodes
> +- ranges : the child address space are mapped 1:1 onto the parent address space
> +- ti,hwmods : must be "ocp2scp_usb_phy"
> +
> +Sub-nodes:
> +All the devices connected to ocp2scp are described using sub-node to ocp2scp
> diff --git a/drivers/Kconfig b/drivers/Kconfig
> index ece958d..324e958 100644
> --- a/drivers/Kconfig
> +++ b/drivers/Kconfig
> @@ -2,6 +2,8 @@ menu "Device Drivers"
>  
>  source "drivers/base/Kconfig"
>  
> +source "drivers/bus/Kconfig"
> +
>  source "drivers/connector/Kconfig"
>  
>  source "drivers/mtd/Kconfig"
> diff --git a/drivers/Makefile b/drivers/Makefile
> index 5b42184..f8cdeeb 100644
> --- a/drivers/Makefile
> +++ b/drivers/Makefile
> @@ -5,6 +5,8 @@
>  # Rewritten to use lists instead of if-statements.
>  #
>  
> +obj-y				+= bus/
> +
>  # GPIO must come after pinctrl as gpios may need to mux pins etc
>  obj-y				+= pinctrl/
>  obj-y				+= gpio/
> diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
> new file mode 100644
> index 0000000..6270415
> --- /dev/null
> +++ b/drivers/bus/Kconfig
> @@ -0,0 +1,15 @@
> +#
> +# Bus Devices
> +#
> +
> +menu "Bus devices"
> +
> +config OMAP_OCP2SCP
> +	tristate "OMAP OCP2SCP DRIVER"
> +	help
> +	  Driver to enable ocp2scp module which transforms ocp interface
> +	  protocol to scp protocol. In OMAP4, USB PHY is connected via
> +	  OCP2SCP and in OMAP5, both USB PHY and SATA PHY is connected via
> +	  OCP2SCP.
> +
> +endmenu
> diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
> new file mode 100644
> index 0000000..0ec50bc
> --- /dev/null
> +++ b/drivers/bus/Makefile
> @@ -0,0 +1,5 @@
> +#
> +# Makefile for the bus drivers.
> +#
> +
> +obj-$(CONFIG_OMAP_OCP2SCP)	+= omap-ocp2scp.o
> diff --git a/drivers/bus/omap-ocp2scp.c b/drivers/bus/omap-ocp2scp.c
> new file mode 100644
> index 0000000..881d5bb
> --- /dev/null
> +++ b/drivers/bus/omap-ocp2scp.c
> @@ -0,0 +1,88 @@
> +/*
> + * omap-ocp2scp.c - transform ocp interface protocol to scp protocol
> + *
> + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * Author: Kishon Vijay Abraham I <kishon at ti.com>
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/err.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/of.h>
> +#include <linux/of_platform.h>
> +
> +static int ocp2scp_remove_devices(struct device *dev, void *c)
> +{
> +	struct platform_device *pdev = to_platform_device(dev);
> +
> +	platform_device_unregister(pdev);
> +
> +	return 0;
> +}
> +
> +static int __devinit omap_ocp2scp_probe(struct platform_device *pdev)
> +{
> +	int			ret;
> +	struct device_node	*np = pdev->dev.of_node;
> +
> +	if (np) {
> +		ret = of_platform_populate(np, NULL, NULL, &pdev->dev);
> +		if (ret) {
> +			dev_err(&pdev->dev, "failed to add resources for ocp2scp child\n");
> +			goto err0;
> +		}
> +	}
> +	pm_runtime_enable(&pdev->dev);
> +
> +	return 0;
> +
> +err0:
> +	device_for_each_child(&pdev->dev, NULL, ocp2scp_remove_devices);
> +
> +	return ret;
> +}
> +
> +static int __devexit omap_ocp2scp_remove(struct platform_device *pdev)
> +{
> +	pm_runtime_disable(&pdev->dev);
> +	device_for_each_child(&pdev->dev, NULL, ocp2scp_remove_devices);
> +
> +	return 0;
> +}
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id omap_ocp2scp_id_table[] = {
> +	{ .compatible = "ti,omap-ocp2scp" },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, omap_usb2_id_table);
> +#endif
> +
> +static struct platform_driver omap_ocp2scp_driver = {
> +	.probe		= omap_ocp2scp_probe,
> +	.remove		= __devexit_p(omap_ocp2scp_remove),
> +	.driver		= {
> +		.name	= "omap-ocp2scp",
> +		.owner	= THIS_MODULE,
> +		.of_match_table = of_match_ptr(omap_ocp2scp_id_table),
> +	},
> +};
> +
> +module_platform_driver(omap_ocp2scp_driver);
> +
> +MODULE_ALIAS("platform: omap-ocp2scp");
> +MODULE_AUTHOR("Texas Instruments Inc.");
> +MODULE_DESCRIPTION("OMAP OCP2SCP DRIVER");

driver isn't an acronym, so it need not be all uppercase. (nit-picking,
I know :-)

> +MODULE_LICENSE("GPLv2");

it should be "GPL v2" with a space. See <linux/module.h>.

-- 
balbi
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.ozlabs.org/pipermail/devicetree-discuss/attachments/20120806/9432fcc7/attachment.sig>


More information about the devicetree-discuss mailing list