[PATCH 1/2] ARM: dts: Use active low flag for gpio-keys on Origen

[Thomas Abraham]

On 31 August 2012 09:43, Sachin Kamat <sachin.kamat at linaro.org> wrote:
> Commit: f447ed8b31d (gpio: samsung: add flags specifier to
> device-tree binding) adds a flag to represent active low state
> for gpio line. Since gpio-keys on Origen board are active low,
> using this flag to represent the same.
>
> Cc: Olof Johansson <olof at lixom.net>
> Cc: Thomas Abraham <thomas.abraham at linaro.org>
> Signed-off-by: Sachin Kamat <sachin.kamat at linaro.org>
> ---
>  arch/arm/boot/dts/exynos4210-origen.dts |   10 +++++-----
>  1 files changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
> index 0c49caa..c37edf0 100644
> --- a/arch/arm/boot/dts/exynos4210-origen.dts
> +++ b/arch/arm/boot/dts/exynos4210-origen.dts
> @@ -62,31 +62,31 @@
>
>                 up {
>                         label = "Up";
> -                       gpios = <&gpx2 0 0 0 2>;
> +                       gpios = <&gpx2 0 0 0x10000 2>;
>                         linux,code = <103>;
>                 };
>
>                 down {
>                         label = "Down";
> -                       gpios = <&gpx2 1 0 0 2>;
> +                       gpios = <&gpx2 1 0 0x10000 2>;
>                         linux,code = <108>;
>                 };
>
>                 back {
>                         label = "Back";
> -                       gpios = <&gpx1 7 0 0 2>;
> +                       gpios = <&gpx1 7 0 0x10000 2>;
>                         linux,code = <158>;
>                 };
>
>                 home {
>                         label = "Home";
> -                       gpios = <&gpx1 6 0 0 2>;
> +                       gpios = <&gpx1 6 0 0x10000 2>;
>                         linux,code = <102>;
>                 };
>
>                 menu {
>                         label = "Menu";
> -                       gpios = <&gpx1 5 0 0 2>;
> +                       gpios = <&gpx1 5 0 0x10000 2>;
>                         linux,code = <139>;
>                 };
>         };
> --
> 1.7.4.1
>

Reviewed-by: Thomas Abraham <thomas.abraham at linaro.org>